diff mbox series

[v11,06/20] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state

Message ID 20230927154339.1600738-7-rrichter@amd.com
State Superseded
Headers show
Series cxl/pci: Add support for RCH RAS error handling | expand

Commit Message

Robert Richter Sept. 27, 2023, 3:43 p.m. UTC 
Same as for ports and dports, also store the endpoint's Component
Register mappings, use struct cxl_dev_state for that.

Keep the Component Register base address @component_reg_phys a bit to
not break functionality. It will be removed after the transition in a
later patch.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
---
 drivers/cxl/core/mbox.c | 2 ++
 drivers/cxl/cxlmem.h    | 2 ++
 drivers/cxl/pci.c       | 9 +++++----
 3 files changed, 9 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 4df4f614f490..7e1c4d6f2e39 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1377,6 +1377,8 @@  struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev)
 	mutex_init(&mds->mbox_mutex);
 	mutex_init(&mds->event.log_lock);
 	mds->cxlds.dev = dev;
+	mds->cxlds.reg_map.host = dev;
+	mds->cxlds.reg_map.resource = CXL_RESOURCE_NONE;
 	mds->cxlds.type = CXL_DEVTYPE_CLASSMEM;
 
 	return mds;
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 706f8a6d1ef4..8fb8db47c3b7 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -397,6 +397,7 @@  enum cxl_devtype {
  *
  * @dev: The device associated with this CXL state
  * @cxlmd: The device representing the CXL.mem capabilities of @dev
+ * @reg_map: component and ras register mapping parameters
  * @regs: Parsed register blocks
  * @cxl_dvsec: Offset to the PCIe device DVSEC
  * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
@@ -411,6 +412,7 @@  enum cxl_devtype {
 struct cxl_dev_state {
 	struct device *dev;
 	struct cxl_memdev *cxlmd;
+	struct cxl_register_map reg_map;
 	struct cxl_regs regs;
 	int cxl_dvsec;
 	bool rcd;
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index f9d852957809..a6ad9bcb96b4 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -835,15 +835,16 @@  static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * still be useful for management functions so don't return an error.
 	 */
 	cxlds->component_reg_phys = CXL_RESOURCE_NONE;
-	rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
+	rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT,
+				&cxlds->reg_map);
 	if (rc)
 		dev_warn(&pdev->dev, "No component registers (%d)\n", rc);
-	else if (!map.component_map.ras.valid)
+	else if (!cxlds->reg_map.component_map.ras.valid)
 		dev_dbg(&pdev->dev, "RAS registers not found\n");
 
-	cxlds->component_reg_phys = map.resource;
+	cxlds->component_reg_phys = cxlds->reg_map.resource;
 
-	rc = cxl_map_component_regs(&map, &cxlds->regs.component,
+	rc = cxl_map_component_regs(&cxlds->reg_map, &cxlds->regs.component,
 				    BIT(CXL_CM_CAP_CAP_ID_RAS));
 	if (rc)
 		dev_dbg(&pdev->dev, "Failed to map RAS capability.\n");