| Message ID | 20240816-dcd-type2-upstream-v3-19-7c9b96cba6d7@intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On 8/16/24 7:44 AM, ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Extent information can be helpful to the user to coordinate memory usage > with the external orchestrator and FM. > > Expose the details of region extents by creating the following > sysfs entries. > > /sys/bus/cxl/devices/dax_regionX/extentX.Y > /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > --- > Changes: > [iweiny: split this out] > [Jonathan: add documentation for extent sysfs] > [Jonathan/djbw: s/label/tag] > [Jonathan/djbw: treat tag as uuid] > [djbw: use __ATTRIBUTE_GROUPS] > [djbw: make tag invisible if it is empty] > [djbw/iweiny: use conventional id names for extents; extentX.Y] > --- > Documentation/ABI/testing/sysfs-bus-cxl | 13 ++++++++ > drivers/cxl/core/extent.c | 58 +++++++++++++++++++++++++++++++++ > 2 files changed, 71 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > index 3a5ee88e551b..e97e6a73c960 100644 > --- a/Documentation/ABI/testing/sysfs-bus-cxl > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > @@ -599,3 +599,16 @@ Description: > See Documentation/ABI/stable/sysfs-devices-node. access0 provides > the number to the closest initiator and access1 provides the > number to the closest CPU. > + > +What: /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag I wonder consider an entry for each with their own descriptions, which seems to be the standard practice. DJ > +Date: October, 2024 > +KernelVersion: v6.12 > +Contact: linux-cxl@vger.kernel.org > +Description: > + (RO) [For Dynamic Capacity regions only] Extent offset and > + length within the region. Users can use the extent information > + to create DAX devices on specific extents. This is done by > + creating and destroying DAX devices in specific sequences and > + looking at the mappings created. > diff --git a/drivers/cxl/core/extent.c b/drivers/cxl/core/extent.c > index 34456594cdc3..d7d526a51e2b 100644 > --- a/drivers/cxl/core/extent.c > +++ b/drivers/cxl/core/extent.c > @@ -6,6 +6,63 @@ > > #include "core.h" > > +static ssize_t offset_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + > + return sysfs_emit(buf, "%#llx\n", region_extent->hpa_range.start); > +} > +static DEVICE_ATTR_RO(offset); > + > +static ssize_t length_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + u64 length = range_len(®ion_extent->hpa_range); > + > + return sysfs_emit(buf, "%#llx\n", length); > +} > +static DEVICE_ATTR_RO(length); > + > +static ssize_t tag_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + > + return sysfs_emit(buf, "%pUb\n", ®ion_extent->tag); > +} > +static DEVICE_ATTR_RO(tag); > + > +static struct attribute *region_extent_attrs[] = { > + &dev_attr_offset.attr, > + &dev_attr_length.attr, > + &dev_attr_tag.attr, > + NULL, > +}; > + > +static uuid_t empty_tag = { 0 }; > + > +static umode_t region_extent_visible(struct kobject *kobj, > + struct attribute *a, int n) > +{ > + struct device *dev = kobj_to_dev(kobj); > + struct region_extent *region_extent = to_region_extent(dev); > + > + if (a == &dev_attr_tag.attr && > + uuid_equal(®ion_extent->tag, &empty_tag)) > + return 0; > + > + return a->mode; > +} > + > +static const struct attribute_group region_extent_attribute_group = { > + .attrs = region_extent_attrs, > + .is_visible = region_extent_visible, > +}; > + > +__ATTRIBUTE_GROUPS(region_extent_attribute); > + > static void cxled_release_extent(struct cxl_endpoint_decoder *cxled, > struct cxled_extent *ed_extent) > { > @@ -44,6 +101,7 @@ static void region_extent_release(struct device *dev) > static const struct device_type region_extent_type = { > .name = "extent", > .release = region_extent_release, > + .groups = region_extent_attribute_groups, > }; > > bool is_region_extent(struct device *dev) >
Dave Jiang wrote: > > > On 8/16/24 7:44 AM, ira.weiny@intel.com wrote: > > From: Navneet Singh <navneet.singh@intel.com> > > > > Extent information can be helpful to the user to coordinate memory usage > > with the external orchestrator and FM. > > > > Expose the details of region extents by creating the following > > sysfs entries. > > > > /sys/bus/cxl/devices/dax_regionX/extentX.Y > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > > > --- > > Changes: > > [iweiny: split this out] > > [Jonathan: add documentation for extent sysfs] > > [Jonathan/djbw: s/label/tag] > > [Jonathan/djbw: treat tag as uuid] > > [djbw: use __ATTRIBUTE_GROUPS] > > [djbw: make tag invisible if it is empty] > > [djbw/iweiny: use conventional id names for extents; extentX.Y] > > --- > > Documentation/ABI/testing/sysfs-bus-cxl | 13 ++++++++ > > drivers/cxl/core/extent.c | 58 +++++++++++++++++++++++++++++++++ > > 2 files changed, 71 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > > index 3a5ee88e551b..e97e6a73c960 100644 > > --- a/Documentation/ABI/testing/sysfs-bus-cxl > > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > > @@ -599,3 +599,16 @@ Description: > > See Documentation/ABI/stable/sysfs-devices-node. access0 provides > > the number to the closest initiator and access1 provides the > > number to the closest CPU. > > + > > +What: /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > I wonder consider an entry for each with their own descriptions, which seems to be the standard practice. :-/ Except kind of for the access'. What: /sys/bus/cxl/devices/regionZ/accessY/read_bandwidth /sys/bus/cxl/devices/regionZ/accessY/write_banwidth What: /sys/bus/cxl/devices/regionZ/accessY/read_latency /sys/bus/cxl/devices/regionZ/accessY/write_latency But I think you have a point. Ira > > DJ > [snip]
On Thu, 22 Aug 2024 21:58:02 -0500 Ira Weiny <ira.weiny@intel.com> wrote: > Dave Jiang wrote: > > > > > > On 8/16/24 7:44 AM, ira.weiny@intel.com wrote: > > > From: Navneet Singh <navneet.singh@intel.com> > > > > > > Extent information can be helpful to the user to coordinate memory usage > > > with the external orchestrator and FM. > > > > > > Expose the details of region extents by creating the following > > > sysfs entries. > > > > > > /sys/bus/cxl/devices/dax_regionX/extentX.Y > > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > > > /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > > > > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > > > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > > > > > --- > > > Changes: > > > [iweiny: split this out] > > > [Jonathan: add documentation for extent sysfs] > > > [Jonathan/djbw: s/label/tag] > > > [Jonathan/djbw: treat tag as uuid] > > > [djbw: use __ATTRIBUTE_GROUPS] > > > [djbw: make tag invisible if it is empty] > > > [djbw/iweiny: use conventional id names for extents; extentX.Y] > > > --- > > > Documentation/ABI/testing/sysfs-bus-cxl | 13 ++++++++ > > > drivers/cxl/core/extent.c | 58 +++++++++++++++++++++++++++++++++ > > > 2 files changed, 71 insertions(+) > > > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > > > index 3a5ee88e551b..e97e6a73c960 100644 > > > --- a/Documentation/ABI/testing/sysfs-bus-cxl > > > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > > > @@ -599,3 +599,16 @@ Description: > > > See Documentation/ABI/stable/sysfs-devices-node. access0 provides > > > the number to the closest initiator and access1 provides the > > > number to the closest CPU. > > > + > > > +What: /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > > > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > > > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > > > I wonder consider an entry for each with their own descriptions, which seems to be the standard practice. > > :-/ Except kind of for the access'. > > What: /sys/bus/cxl/devices/regionZ/accessY/read_bandwidth > /sys/bus/cxl/devices/regionZ/accessY/write_banwidth > > What: /sys/bus/cxl/devices/regionZ/accessY/read_latency > /sys/bus/cxl/devices/regionZ/accessY/write_latency > > But I think you have a point. It's a balance between complexity and repetition. E.g. https://elixir.bootlin.com/linux/v6.11-rc4/source/Documentation/ABI/testing/sysfs-bus-iio#L427 is one of these files I know far too well. That would be a lot of very boring repetition and that doc is long enough without breaking them up. Here there are only 3 and a good bit of description differs so probably good to split up. Less so for bandwidth and latency cases. Jonathan > > Ira > > > > > DJ > > > > [snip] >
On Fri, 16 Aug 2024 09:44:27 -0500 ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Extent information can be helpful to the user to coordinate memory usage > with the external orchestrator and FM. > > Expose the details of region extents by creating the following > sysfs entries. > > /sys/bus/cxl/devices/dax_regionX/extentX.Y > /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > LGTM with or without the docs split. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On Fri, Aug 16, 2024 at 09:44:27AM -0500, ira.weiny@intel.com wrote: > From: Navneet Singh <navneet.singh@intel.com> > > Extent information can be helpful to the user to coordinate memory usage > with the external orchestrator and FM. > > Expose the details of region extents by creating the following > sysfs entries. > > /sys/bus/cxl/devices/dax_regionX/extentX.Y > /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > > Signed-off-by: Navneet Singh <navneet.singh@intel.com> > Co-developed-by: Ira Weiny <ira.weiny@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> > > --- > Changes: > [iweiny: split this out] > [Jonathan: add documentation for extent sysfs] > [Jonathan/djbw: s/label/tag] > [Jonathan/djbw: treat tag as uuid] > [djbw: use __ATTRIBUTE_GROUPS] > [djbw: make tag invisible if it is empty] > [djbw/iweiny: use conventional id names for extents; extentX.Y] > --- > Documentation/ABI/testing/sysfs-bus-cxl | 13 ++++++++ > drivers/cxl/core/extent.c | 58 +++++++++++++++++++++++++++++++++ > 2 files changed, 71 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > index 3a5ee88e551b..e97e6a73c960 100644 > --- a/Documentation/ABI/testing/sysfs-bus-cxl > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > @@ -599,3 +599,16 @@ Description: > See Documentation/ABI/stable/sysfs-devices-node. access0 provides > the number to the closest initiator and access1 provides the > number to the closest CPU. > + > +What: /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/length > + /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag > +Date: October, 2024 > +KernelVersion: v6.12 > +Contact: linux-cxl@vger.kernel.org > +Description: > + (RO) [For Dynamic Capacity regions only] Extent offset and > + length within the region. Users can use the extent information > + to create DAX devices on specific extents. This is done by > + creating and destroying DAX devices in specific sequences and > + looking at the mappings created. > diff --git a/drivers/cxl/core/extent.c b/drivers/cxl/core/extent.c > index 34456594cdc3..d7d526a51e2b 100644 > --- a/drivers/cxl/core/extent.c > +++ b/drivers/cxl/core/extent.c > @@ -6,6 +6,63 @@ > > #include "core.h" > > +static ssize_t offset_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + > + return sysfs_emit(buf, "%#llx\n", region_extent->hpa_range.start); > +} > +static DEVICE_ATTR_RO(offset); > + > +static ssize_t length_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + u64 length = range_len(®ion_extent->hpa_range); > + > + return sysfs_emit(buf, "%#llx\n", length); > +} > +static DEVICE_ATTR_RO(length); > + > +static ssize_t tag_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct region_extent *region_extent = to_region_extent(dev); > + > + return sysfs_emit(buf, "%pUb\n", ®ion_extent->tag); > +} > +static DEVICE_ATTR_RO(tag); > + > +static struct attribute *region_extent_attrs[] = { > + &dev_attr_offset.attr, > + &dev_attr_length.attr, > + &dev_attr_tag.attr, > + NULL, > +}; > + > +static uuid_t empty_tag = { 0 }; > + > +static umode_t region_extent_visible(struct kobject *kobj, > + struct attribute *a, int n) > +{ > + struct device *dev = kobj_to_dev(kobj); > + struct region_extent *region_extent = to_region_extent(dev); > + > + if (a == &dev_attr_tag.attr && > + uuid_equal(®ion_extent->tag, &empty_tag)) > + return 0; > + > + return a->mode; > +} > + > +static const struct attribute_group region_extent_attribute_group = { > + .attrs = region_extent_attrs, > + .is_visible = region_extent_visible, > +}; > + > +__ATTRIBUTE_GROUPS(region_extent_attribute); > + > static void cxled_release_extent(struct cxl_endpoint_decoder *cxled, > struct cxled_extent *ed_extent) > { > @@ -44,6 +101,7 @@ static void region_extent_release(struct device *dev) > static const struct device_type region_extent_type = { > .name = "extent", > .release = region_extent_release, > + .groups = region_extent_attribute_groups, > }; > > bool is_region_extent(struct device *dev) > > -- > 2.45.2 >
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 3a5ee88e551b..e97e6a73c960 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -599,3 +599,16 @@ Description: See Documentation/ABI/stable/sysfs-devices-node. access0 provides the number to the closest initiator and access1 provides the number to the closest CPU. + +What: /sys/bus/cxl/devices/dax_regionX/extentX.Y/offset + /sys/bus/cxl/devices/dax_regionX/extentX.Y/length + /sys/bus/cxl/devices/dax_regionX/extentX.Y/tag +Date: October, 2024 +KernelVersion: v6.12 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) [For Dynamic Capacity regions only] Extent offset and + length within the region. Users can use the extent information + to create DAX devices on specific extents. This is done by + creating and destroying DAX devices in specific sequences and + looking at the mappings created. diff --git a/drivers/cxl/core/extent.c b/drivers/cxl/core/extent.c index 34456594cdc3..d7d526a51e2b 100644 --- a/drivers/cxl/core/extent.c +++ b/drivers/cxl/core/extent.c @@ -6,6 +6,63 @@ #include "core.h" +static ssize_t offset_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct region_extent *region_extent = to_region_extent(dev); + + return sysfs_emit(buf, "%#llx\n", region_extent->hpa_range.start); +} +static DEVICE_ATTR_RO(offset); + +static ssize_t length_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct region_extent *region_extent = to_region_extent(dev); + u64 length = range_len(®ion_extent->hpa_range); + + return sysfs_emit(buf, "%#llx\n", length); +} +static DEVICE_ATTR_RO(length); + +static ssize_t tag_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct region_extent *region_extent = to_region_extent(dev); + + return sysfs_emit(buf, "%pUb\n", ®ion_extent->tag); +} +static DEVICE_ATTR_RO(tag); + +static struct attribute *region_extent_attrs[] = { + &dev_attr_offset.attr, + &dev_attr_length.attr, + &dev_attr_tag.attr, + NULL, +}; + +static uuid_t empty_tag = { 0 }; + +static umode_t region_extent_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct region_extent *region_extent = to_region_extent(dev); + + if (a == &dev_attr_tag.attr && + uuid_equal(®ion_extent->tag, &empty_tag)) + return 0; + + return a->mode; +} + +static const struct attribute_group region_extent_attribute_group = { + .attrs = region_extent_attrs, + .is_visible = region_extent_visible, +}; + +__ATTRIBUTE_GROUPS(region_extent_attribute); + static void cxled_release_extent(struct cxl_endpoint_decoder *cxled, struct cxled_extent *ed_extent) { @@ -44,6 +101,7 @@ static void region_extent_release(struct device *dev) static const struct device_type region_extent_type = { .name = "extent", .release = region_extent_release, + .groups = region_extent_attribute_groups, }; bool is_region_extent(struct device *dev)