| Message ID | 20241025210305.27499-6-terry.bowman@amd.com |
|---|---|
| State | New |
| Headers | show |
| Series | Enable CXL PCIe port protocol error handling and logging | expand |
On Fri, 25 Oct 2024 16:02:56 -0500 Terry Bowman <terry.bowman@amd.com> wrote: > The AER service driver doesn't currently handle CXL protocol errors > reported by CXL root ports, CXL upstream switch ports, and CXL downstream > switch ports. Consequently, RAS protocol errors from CXL PCIe port devices > are not properly logged or handled. > > These errors are reported to the OS via the root port's AER correctable > and uncorrectable internal error fields. While the AER driver supports > handling downstream port protocol errors in restricted CXL host (RCH) mode > also known as CXL1.1, it lacks the same functionality for CXL PCIe ports > operating in virtual hierarchy (VH) mode. > > To address this gap, update the AER driver to handle CXL PCIe port device > protocol correctable errors (CE). > > Make this update alongside the existing downstream port RCH error handling > logic, extending support to CXL PCIe ports in VH mode. > > is_internal_error() is currently limited by CONFIG_PCIEAER_CXL kernel > config. Update is_internal_error()'s function declaration such that it is > always available regardless if CONFIG_PCIEAER_CXL kernel config is enabled > or disabled. > > The uncorrectable error (UCE) handling will be added in a future patch. > > [1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and > Upstream Switch Ports > > Signed-off-by: Terry Bowman <terry.bowman@amd.com> This is a fiddly patch to read, but that's at least partly diff going crazy in a few places. Anyhow, I think it is fine but I would call out that this changes things so that the PCI error handlers are no longer called for CXL ports if it's an internal error. With a sentence on that: Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> I'm not 100% convinced the path of separate handlers is the way to go but we can always change things again if that doesn't work out. Jonathan > --- > drivers/pci/pcie/aer.c | 59 ++++++++++++++++++++++++++++-------------- > 1 file changed, 39 insertions(+), 20 deletions(-) > > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c > index 53e9a11f6c0f..1d3e5b929661 100644 > --- a/drivers/pci/pcie/aer.c > +++ b/drivers/pci/pcie/aer.c > @@ -941,8 +941,15 @@ static bool find_source_device(struct pci_dev *parent, > return true; > } > > -#ifdef CONFIG_PCIEAER_CXL > +static bool is_internal_error(struct aer_err_info *info) > +{ > + if (info->severity == AER_CORRECTABLE) > + return info->status & PCI_ERR_COR_INTERNAL; > > + return info->status & PCI_ERR_UNC_INTN; > +} > + > +#ifdef CONFIG_PCIEAER_CXL Diff was having fun. Maybe put a blank line here? I think that's what has tripped it up. > /** > * pci_aer_unmask_internal_errors - unmask internal errors > * @dev: pointer to the pcie_dev data structure > @@ -994,14 +1001,6 @@ static bool cxl_error_is_native(struct pci_dev *dev) > return (pcie_ports_native || host->native_aer); > } > - > /** > @@ -1115,8 +1131,11 @@ static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info) > > static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info) > { > - cxl_handle_error(dev, info); > - pci_aer_handle_error(dev, info); > + if (is_internal_error(info) && handles_cxl_errors(dev)) > + cxl_handle_error(dev, info); > + else > + pci_aer_handle_error(dev, info); Whilst not calling this for the CXL cases probably makes sense and given new code needs to be the case to avoid a double clear I think, I would call that change out more explicitly in the patch description. > + > pci_dev_put(dev); > } >
Hi Jonathan, I added responses below. On 10/30/2024 10:13 AM, Jonathan Cameron wrote: > On Fri, 25 Oct 2024 16:02:56 -0500 > Terry Bowman <terry.bowman@amd.com> wrote: > >> The AER service driver doesn't currently handle CXL protocol errors >> reported by CXL root ports, CXL upstream switch ports, and CXL downstream >> switch ports. Consequently, RAS protocol errors from CXL PCIe port devices >> are not properly logged or handled. >> >> These errors are reported to the OS via the root port's AER correctable >> and uncorrectable internal error fields. While the AER driver supports >> handling downstream port protocol errors in restricted CXL host (RCH) mode >> also known as CXL1.1, it lacks the same functionality for CXL PCIe ports >> operating in virtual hierarchy (VH) mode. >> >> To address this gap, update the AER driver to handle CXL PCIe port device >> protocol correctable errors (CE). >> >> Make this update alongside the existing downstream port RCH error handling >> logic, extending support to CXL PCIe ports in VH mode. >> >> is_internal_error() is currently limited by CONFIG_PCIEAER_CXL kernel >> config. Update is_internal_error()'s function declaration such that it is >> always available regardless if CONFIG_PCIEAER_CXL kernel config is enabled >> or disabled. >> >> The uncorrectable error (UCE) handling will be added in a future patch. >> >> [1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and >> Upstream Switch Ports >> >> Signed-off-by: Terry Bowman <terry.bowman@amd.com> > This is a fiddly patch to read, but that's at least partly diff going crazy > in a few places. > > Anyhow, I think it is fine but I would call out that this changes > things so that the PCI error handlers are no longer called for CXL ports > if it's an internal error. > > With a sentence on that: > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > I'm not 100% convinced the path of separate handlers is the way to go > but we can always change things again if that doesn't work out. > > Jonathan I will update the patch message to mention ports use CXL handling for CIE will not call the PCIe handlers or PCIe recovery. Note, port devices are bound to the portdrv driver with fairly generic CIE handler. Regards, Terry >> --- >> drivers/pci/pcie/aer.c | 59 ++++++++++++++++++++++++++++-------------- >> 1 file changed, 39 insertions(+), 20 deletions(-) >> >> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c >> index 53e9a11f6c0f..1d3e5b929661 100644 >> --- a/drivers/pci/pcie/aer.c >> +++ b/drivers/pci/pcie/aer.c >> @@ -941,8 +941,15 @@ static bool find_source_device(struct pci_dev *parent, >> return true; >> } >> >> -#ifdef CONFIG_PCIEAER_CXL >> +static bool is_internal_error(struct aer_err_info *info) >> +{ >> + if (info->severity == AER_CORRECTABLE) >> + return info->status & PCI_ERR_COR_INTERNAL; >> >> + return info->status & PCI_ERR_UNC_INTN; >> +} >> + >> +#ifdef CONFIG_PCIEAER_CXL > Diff was having fun. Maybe put a blank line here? I think that's > what has tripped it up. > >> /** >> * pci_aer_unmask_internal_errors - unmask internal errors >> * @dev: pointer to the pcie_dev data structure >> @@ -994,14 +1001,6 @@ static bool cxl_error_is_native(struct pci_dev *dev) >> return (pcie_ports_native || host->native_aer); >> } >> - >> /** >> @@ -1115,8 +1131,11 @@ static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info) >> >> static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info) >> { >> - cxl_handle_error(dev, info); >> - pci_aer_handle_error(dev, info); >> + if (is_internal_error(info) && handles_cxl_errors(dev)) >> + cxl_handle_error(dev, info); >> + else >> + pci_aer_handle_error(dev, info); > Whilst not calling this for the CXL cases probably makes sense and > given new code needs to be the case to avoid a double clear I think, > I would call that change out more explicitly in the patch description. >> + >> pci_dev_put(dev); >> } >>
On 10/25/24 2:02 PM, Terry Bowman wrote: > The AER service driver doesn't currently handle CXL protocol errors > reported by CXL root ports, CXL upstream switch ports, and CXL downstream > switch ports. Consequently, RAS protocol errors from CXL PCIe port devices > are not properly logged or handled. > > These errors are reported to the OS via the root port's AER correctable > and uncorrectable internal error fields. While the AER driver supports > handling downstream port protocol errors in restricted CXL host (RCH) mode > also known as CXL1.1, it lacks the same functionality for CXL PCIe ports > operating in virtual hierarchy (VH) mode. > > To address this gap, update the AER driver to handle CXL PCIe port device > protocol correctable errors (CE). > > Make this update alongside the existing downstream port RCH error handling > logic, extending support to CXL PCIe ports in VH mode. > > is_internal_error() is currently limited by CONFIG_PCIEAER_CXL kernel > config. Update is_internal_error()'s function declaration such that it is > always available regardless if CONFIG_PCIEAER_CXL kernel config is enabled > or disabled. > > The uncorrectable error (UCE) handling will be added in a future patch. > > [1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and > Upstream Switch Ports > > Signed-off-by: Terry Bowman <terry.bowman@amd.com> With the commit log update from what Jonathan suggested, Reviewed-by: Dave Jiang <dave.jiang@intel.com> > --- > drivers/pci/pcie/aer.c | 59 ++++++++++++++++++++++++++++-------------- > 1 file changed, 39 insertions(+), 20 deletions(-) > > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c > index 53e9a11f6c0f..1d3e5b929661 100644 > --- a/drivers/pci/pcie/aer.c > +++ b/drivers/pci/pcie/aer.c > @@ -941,8 +941,15 @@ static bool find_source_device(struct pci_dev *parent, > return true; > } > > -#ifdef CONFIG_PCIEAER_CXL > +static bool is_internal_error(struct aer_err_info *info) > +{ > + if (info->severity == AER_CORRECTABLE) > + return info->status & PCI_ERR_COR_INTERNAL; > > + return info->status & PCI_ERR_UNC_INTN; > +} > + > +#ifdef CONFIG_PCIEAER_CXL > /** > * pci_aer_unmask_internal_errors - unmask internal errors > * @dev: pointer to the pcie_dev data structure > @@ -994,14 +1001,6 @@ static bool cxl_error_is_native(struct pci_dev *dev) > return (pcie_ports_native || host->native_aer); > } > > -static bool is_internal_error(struct aer_err_info *info) > -{ > - if (info->severity == AER_CORRECTABLE) > - return info->status & PCI_ERR_COR_INTERNAL; > - > - return info->status & PCI_ERR_UNC_INTN; > -} > - > static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data) > { > struct aer_err_info *info = (struct aer_err_info *)data; > @@ -1033,14 +1032,23 @@ static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data) > > static void cxl_handle_error(struct pci_dev *dev, struct aer_err_info *info) > { > - /* > - * Internal errors of an RCEC indicate an AER error in an > - * RCH's downstream port. Check and handle them in the CXL.mem > - * device driver. > - */ > - if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC && > - is_internal_error(info)) > + if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) > pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info); > + > + if (info->severity == AER_CORRECTABLE) { > + struct pci_driver *pdrv = dev->driver; > + int aer = dev->aer_cap; > + > + if (aer) > + pci_write_config_dword(dev, aer + PCI_ERR_COR_STATUS, > + info->status); > + > + if (pdrv && pdrv->cxl_err_handler && > + pdrv->cxl_err_handler->cor_error_detected) > + pdrv->cxl_err_handler->cor_error_detected(dev); > + > + pcie_clear_device_status(dev); > + } > } > > static int handles_cxl_error_iter(struct pci_dev *dev, void *data) > @@ -1058,9 +1066,13 @@ static bool handles_cxl_errors(struct pci_dev *dev) > { > bool handles_cxl = false; > > - if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC && > - pcie_aer_is_native(dev)) > + if (!pcie_aer_is_native(dev)) > + return false; > + > + if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) > pcie_walk_rcec(dev, handles_cxl_error_iter, &handles_cxl); > + else > + handles_cxl = pcie_is_cxl_port(dev); > > return handles_cxl; > } > @@ -1078,6 +1090,10 @@ static void cxl_enable_internal_errors(struct pci_dev *dev) > static inline void cxl_enable_internal_errors(struct pci_dev *dev) { } > static inline void cxl_handle_error(struct pci_dev *dev, > struct aer_err_info *info) { } > +static bool handles_cxl_errors(struct pci_dev *dev) > +{ > + return false; > +} > #endif > > /** > @@ -1115,8 +1131,11 @@ static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info) > > static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info) > { > - cxl_handle_error(dev, info); > - pci_aer_handle_error(dev, info); > + if (is_internal_error(info) && handles_cxl_errors(dev)) > + cxl_handle_error(dev, info); > + else > + pci_aer_handle_error(dev, info); > + > pci_dev_put(dev); > } >
Jonathan Cameron wrote: > On Fri, 25 Oct 2024 16:02:56 -0500 > Terry Bowman <terry.bowman@amd.com> wrote: [..] > Anyhow, I think it is fine but I would call out that this changes > things so that the PCI error handlers are no longer called for CXL ports > if it's an internal error. > > With a sentence on that: > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > I'm not 100% convinced the path of separate handlers is the way to go > but we can always change things again if that doesn't work out. Hmm, if that part is not clear there should at least be more documentation as to the "why". For me it is the fact that CXL potentially promotes endpoint errors to region scope recovery actions, and that PCIe native AER has no concept of AER triggering unrecoverable system fatal reponse. To date panic on AER error has only been logic that ACPI APEI can deploy, and the kernel has no chance to evaluate the error. So, CXL error handlers is a reflection that these errors are outside of the PCIe AER error model.
On 11/4/2024 3:50 PM, Dan Williams wrote: > Jonathan Cameron wrote: >> On Fri, 25 Oct 2024 16:02:56 -0500 >> Terry Bowman <terry.bowman@amd.com> wrote: > [..] >> Anyhow, I think it is fine but I would call out that this changes >> things so that the PCI error handlers are no longer called for CXL ports >> if it's an internal error. >> >> With a sentence on that: >> >> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> >> >> I'm not 100% convinced the path of separate handlers is the way to go >> but we can always change things again if that doesn't work out. > Hmm, if that part is not clear there should at least be more > documentation as to the "why". For me it is the fact that CXL > potentially promotes endpoint errors to region scope recovery actions, > and that PCIe native AER has no concept of AER triggering unrecoverable > system fatal reponse. > > To date panic on AER error has only been logic that ACPI APEI can > deploy, and the kernel has no chance to evaluate the error. So, CXL > error handlers is a reflection that these errors are outside of the PCIe > AER error model. Hi Dan, I'll elaborate more and touch on what you mentioned. Regards, Terry
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 53e9a11f6c0f..1d3e5b929661 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -941,8 +941,15 @@ static bool find_source_device(struct pci_dev *parent, return true; } -#ifdef CONFIG_PCIEAER_CXL +static bool is_internal_error(struct aer_err_info *info) +{ + if (info->severity == AER_CORRECTABLE) + return info->status & PCI_ERR_COR_INTERNAL; + return info->status & PCI_ERR_UNC_INTN; +} + +#ifdef CONFIG_PCIEAER_CXL /** * pci_aer_unmask_internal_errors - unmask internal errors * @dev: pointer to the pcie_dev data structure @@ -994,14 +1001,6 @@ static bool cxl_error_is_native(struct pci_dev *dev) return (pcie_ports_native || host->native_aer); } -static bool is_internal_error(struct aer_err_info *info) -{ - if (info->severity == AER_CORRECTABLE) - return info->status & PCI_ERR_COR_INTERNAL; - - return info->status & PCI_ERR_UNC_INTN; -} - static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data) { struct aer_err_info *info = (struct aer_err_info *)data; @@ -1033,14 +1032,23 @@ static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data) static void cxl_handle_error(struct pci_dev *dev, struct aer_err_info *info) { - /* - * Internal errors of an RCEC indicate an AER error in an - * RCH's downstream port. Check and handle them in the CXL.mem - * device driver. - */ - if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC && - is_internal_error(info)) + if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info); + + if (info->severity == AER_CORRECTABLE) { + struct pci_driver *pdrv = dev->driver; + int aer = dev->aer_cap; + + if (aer) + pci_write_config_dword(dev, aer + PCI_ERR_COR_STATUS, + info->status); + + if (pdrv && pdrv->cxl_err_handler && + pdrv->cxl_err_handler->cor_error_detected) + pdrv->cxl_err_handler->cor_error_detected(dev); + + pcie_clear_device_status(dev); + } } static int handles_cxl_error_iter(struct pci_dev *dev, void *data) @@ -1058,9 +1066,13 @@ static bool handles_cxl_errors(struct pci_dev *dev) { bool handles_cxl = false; - if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC && - pcie_aer_is_native(dev)) + if (!pcie_aer_is_native(dev)) + return false; + + if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) pcie_walk_rcec(dev, handles_cxl_error_iter, &handles_cxl); + else + handles_cxl = pcie_is_cxl_port(dev); return handles_cxl; } @@ -1078,6 +1090,10 @@ static void cxl_enable_internal_errors(struct pci_dev *dev) static inline void cxl_enable_internal_errors(struct pci_dev *dev) { } static inline void cxl_handle_error(struct pci_dev *dev, struct aer_err_info *info) { } +static bool handles_cxl_errors(struct pci_dev *dev) +{ + return false; +} #endif /** @@ -1115,8 +1131,11 @@ static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info) static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info) { - cxl_handle_error(dev, info); - pci_aer_handle_error(dev, info); + if (is_internal_error(info) && handles_cxl_errors(dev)) + cxl_handle_error(dev, info); + else + pci_aer_handle_error(dev, info); + pci_dev_put(dev); }
The AER service driver doesn't currently handle CXL protocol errors reported by CXL root ports, CXL upstream switch ports, and CXL downstream switch ports. Consequently, RAS protocol errors from CXL PCIe port devices are not properly logged or handled. These errors are reported to the OS via the root port's AER correctable and uncorrectable internal error fields. While the AER driver supports handling downstream port protocol errors in restricted CXL host (RCH) mode also known as CXL1.1, it lacks the same functionality for CXL PCIe ports operating in virtual hierarchy (VH) mode. To address this gap, update the AER driver to handle CXL PCIe port device protocol correctable errors (CE). Make this update alongside the existing downstream port RCH error handling logic, extending support to CXL PCIe ports in VH mode. is_internal_error() is currently limited by CONFIG_PCIEAER_CXL kernel config. Update is_internal_error()'s function declaration such that it is always available regardless if CONFIG_PCIEAER_CXL kernel config is enabled or disabled. The uncorrectable error (UCE) handling will be added in a future patch. [1] CXL 3.1 Spec, 12.2.2 CXL Root Ports, Downstream Switch Ports, and Upstream Switch Ports Signed-off-by: Terry Bowman <terry.bowman@amd.com> --- drivers/pci/pcie/aer.c | 59 ++++++++++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 20 deletions(-)