diff mbox series

[v7,05/27] cxl/hdm: Use guard() in cxl_dpa_set_mode()

Message ID 20241107-dcd-type2-upstream-v7-5-56a84e66bc36@intel.com
State Accepted
Commit 27fcfb416827b9e549d821317a9bd21d1abe6821
Headers show
Series DCD: Add support for Dynamic Capacity Devices (DCD) | expand

Commit Message

Ira Weiny Nov. 7, 2024, 8:58 p.m. UTC
Additional DCD functionality is being added to this call which will be
simplified by the use of guard() with the cxl_dpa_rwsem.

Convert the function to use guard() prior to adding DCD functionality.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---
 drivers/cxl/core/hdm.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 3df10517a3278f228c7535fcbdb607d7b75bc879..463ba2669cea55194e2be2c26d02af75dde8d145 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -424,7 +424,6 @@  int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
 	struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct device *dev = &cxled->cxld.dev;
-	int rc;
 
 	switch (mode) {
 	case CXL_DECODER_RAM:
@@ -435,11 +434,9 @@  int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
 		return -EINVAL;
 	}
 
-	down_write(&cxl_dpa_rwsem);
-	if (cxled->cxld.flags & CXL_DECODER_F_ENABLE) {
-		rc = -EBUSY;
-		goto out;
-	}
+	guard(rwsem_write)(&cxl_dpa_rwsem);
+	if (cxled->cxld.flags & CXL_DECODER_F_ENABLE)
+		return -EBUSY;
 
 	/*
 	 * Only allow modes that are supported by the current partition
@@ -447,21 +444,15 @@  int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
 	 */
 	if (mode == CXL_DECODER_PMEM && !resource_size(&cxlds->pmem_res)) {
 		dev_dbg(dev, "no available pmem capacity\n");
-		rc = -ENXIO;
-		goto out;
+		return -ENXIO;
 	}
 	if (mode == CXL_DECODER_RAM && !resource_size(&cxlds->ram_res)) {
 		dev_dbg(dev, "no available ram capacity\n");
-		rc = -ENXIO;
-		goto out;
+		return -ENXIO;
 	}
 
 	cxled->mode = mode;
-	rc = 0;
-out:
-	up_write(&cxl_dpa_rwsem);
-
-	return rc;
+	return 0;
 }
 
 int cxl_dpa_alloc(struct cxl_endpoint_decoder *cxled, unsigned long long size)