@@ -40,13 +40,17 @@ _get_scsi_debug_dev()
logical=${2-512}
unaligned=${3-0}
size=${4-128}
+ test -n "$4" && shift
+ test -n "$3" && shift
+ test -n "$2" && shift
+ test -n "$1" && shift
phys_exp=0
while [ $logical -lt $physical ]; do
let physical=physical/2
let phys_exp=phys_exp+1
done
- opts="sector_size=$logical physblk_exp=$phys_exp lowest_aligned=$unaligned dev_size_mb=$size"
+ opts="sector_size=$logical physblk_exp=$phys_exp lowest_aligned=$unaligned dev_size_mb=$size $@"
echo "scsi_debug options $opts" >> $seqres.full
modprobe scsi_debug $opts
[ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
new file mode 100755
@@ -0,0 +1,89 @@
+#! /bin/bash
+# FS QA Test No. 705
+#
+# Test fallocate(ZERO_RANGE) on a block device, which should be able to
+# WRITE SAME (or equivalent) the range.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/scsi_debug
+
+# real QA test starts here
+_supported_os Linux
+_require_scsi_debug
+_require_xfs_io_command "fzero"
+
+echo "Create and format"
+dev=$(_get_scsi_debug_dev 512 512 0 4 "lbpws=1 lbpws10=1")
+_pwrite_byte 0x62 0 4m $dev >> $seqres.full
+
+echo "Zero range"
+$XFS_IO_PROG -c "fzero -k 512k 1m" $dev
+
+echo "Zero range without keep_size"
+$XFS_IO_PROG -c "fzero 384k 64k" $dev
+
+echo "Zero range past EOD"
+$XFS_IO_PROG -c "fzero -k 3m 4m" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Zero range to MAX_LFS_FILESIZE"
+# zod = MAX_LFS_FILESIZE
+case "$(getconf LONG_BIT)" in
+"32")
+ zod=$(( ($(getconf PAGE_SIZE) << ($(getconf LONG_BIT) - 1) ) - 1))
+ ;;
+"64")
+ zod=9223372036854775807
+ ;;
+*)
+ _fail "sizeof(long) == $(getconf LONG_BIT)?"
+ ;;
+esac
+$XFS_IO_PROG -c "fzero -k 0 $zod" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Destroy device"
+_put_scsi_debug_dev
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,11 @@
+QA output created by 705
+Create and format
+Zero range
+Zero range without keep_size
+Zero range past EOD
+Check contents
+f0cb9070c098aa347f664bead3a219d9 SCSI_DEBUG_DEV
+Zero range to MAX_LFS_FILESIZE
+Check contents
+b5cfa9d6c8febd618f91ac2843d50a1c SCSI_DEBUG_DEV
+Destroy device
new file mode 100755
@@ -0,0 +1,86 @@
+#! /bin/bash
+# FS QA Test No. 706
+#
+# Test fallocate(PUNCH_HOLE) on a block device, which should be able to
+# zero-TRIM (or equivalent) the range.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/scsi_debug
+
+# real QA test starts here
+_supported_os Linux
+_require_scsi_debug
+_require_xfs_io_command "fpunch"
+
+echo "Create and format"
+dev=$(_get_scsi_debug_dev 512 512 0 4 "lbpws=1 lbpws10=1")
+_pwrite_byte 0x62 0 4m $dev >> $seqres.full
+
+echo "Zero punch"
+$XFS_IO_PROG -c "fpunch 512k 1m" $dev
+
+echo "Punch range past EOD"
+$XFS_IO_PROG -c "fpunch 3m 4m" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Punch to MAX_LFS_FILESIZE"
+# zod = MAX_LFS_FILESIZE
+case "$(getconf LONG_BIT)" in
+"32")
+ zod=$(( ($(getconf PAGE_SIZE) << ($(getconf LONG_BIT) - 1) ) - 1))
+ ;;
+"64")
+ zod=9223372036854775807
+ ;;
+*)
+ _fail "sizeof(long) == $(getconf LONG_BIT)?"
+ ;;
+esac
+$XFS_IO_PROG -c "fpunch 0 $zod" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Destroy device"
+_put_scsi_debug_dev
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,10 @@
+QA output created by 706
+Create and format
+Zero punch
+Punch range past EOD
+Check contents
+8c6a3fd51601141b56eaebbab3746156 SCSI_DEBUG_DEV
+Punch to MAX_LFS_FILESIZE
+Check contents
+b5cfa9d6c8febd618f91ac2843d50a1c SCSI_DEBUG_DEV
+Destroy device
new file mode 100755
@@ -0,0 +1,130 @@
+#! /bin/bash
+# FS QA Test No. 707
+#
+# Test the unsupported fallocate flags on a block device. No collapse
+# or insert range, no regular fallocate, no forgetting keep-space on
+# zero range, no punching past EOD, no requests that aren't aligned
+# with the logicalsector size, and make sure the fallbacks work for
+# devices that don't support write_same or discard.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/scsi_debug
+
+# real QA test starts here
+_supported_os Linux
+_require_scsi_debug
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "finsert"
+_require_xfs_io_command "fcollapse"
+_require_xfs_io_command "fzero"
+_require_xfs_io_command "fpunch"
+
+
+echo "Create and format"
+dev=$(_get_scsi_debug_dev 4096 4096 0 4 "lbpws=1 lbpws10=1")
+_pwrite_byte 0x62 0 4m $dev >> $seqres.full
+$XFS_IO_PROG -c "fsync" $dev
+
+echo "Regular fallocate"
+$XFS_IO_PROG -c "falloc 64k 64k" $dev
+
+echo "Insert range"
+$XFS_IO_PROG -c "finsert 128k 64k" $dev
+
+echo "Collapse range"
+$XFS_IO_PROG -c "fcollapse 256k 64k" $dev
+
+echo "Unaligned zero range"
+$XFS_IO_PROG -c "fzero -k 512 512" $dev
+
+echo "Unaligned punch"
+$XFS_IO_PROG -c "fpunch 512 512" $dev
+
+echo "Zero range past MAX_LFS_FILESIZE keep size"
+# zod = MAX_LFS_FILESIZE
+case "$(getconf LONG_BIT)" in
+"32")
+ zod=$(( ($(getconf PAGE_SIZE) << ($(getconf LONG_BIT) - 1) ) - 1))
+ ;;
+"64")
+ zod=9223372036854775807
+ ;;
+*)
+ _fail "sizeof(long) == $(getconf LONG_BIT)?"
+ ;;
+esac
+$XFS_IO_PROG -c "fzero -k 512k $zod" $dev
+
+echo "Zero range past MAX_LFS_FILESIZE"
+$XFS_IO_PROG -c "fzero 512k $zod" $dev
+
+echo "Zero range to MAX_LFS_FILESIZE fail w/o keepsize"
+$XFS_IO_PROG -c "fzero 0 $zod" $dev
+
+echo "Zero range starts past EOD"
+$XFS_IO_PROG -c "fzero -k 900m 1m" $dev
+
+echo "Punch starts past EOD"
+$XFS_IO_PROG -c "fpunch 900m 1m" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Destroy device"
+_put_scsi_debug_dev
+
+echo "Create w/o unmap or writesame and format"
+dev=$(_get_scsi_debug_dev 512 512 0 4 "lbpws=0 lbpws10=0 lbpu=0 write_same_length=0 unmap_max_blocks=0")
+_pwrite_byte 0x62 0 4m $dev >> $seqres.full
+$XFS_IO_PROG -c "fsync" $dev
+
+echo "Zero punch, no fallback available"
+$XFS_IO_PROG -c "fpunch 512k 512k" $dev
+
+echo "Zero range, write fallback"
+$XFS_IO_PROG -c "fzero -k 1536k 512k" $dev
+
+echo "Check contents"
+md5sum $dev | sed -e "s|$dev|SCSI_DEBUG_DEV|g"
+
+echo "Destroy device"
+_put_scsi_debug_dev
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,32 @@
+QA output created by 707
+Create and format
+Regular fallocate
+fallocate: Operation not supported
+Insert range
+fallocate: Operation not supported
+Collapse range
+fallocate: Operation not supported
+Unaligned zero range
+fallocate: Invalid argument
+Unaligned punch
+fallocate: Invalid argument
+Zero range past MAX_LFS_FILESIZE keep size
+fallocate: File too large
+Zero range past MAX_LFS_FILESIZE
+fallocate: File too large
+Zero range to MAX_LFS_FILESIZE fail w/o keepsize
+fallocate: Invalid argument
+Zero range starts past EOD
+fallocate: Invalid argument
+Punch starts past EOD
+fallocate: Invalid argument
+Check contents
+b83f9394092e15bdcda585cd8e776dc6 SCSI_DEBUG_DEV
+Destroy device
+Create w/o unmap or writesame and format
+Zero punch, no fallback available
+fallocate: Operation not supported
+Zero range, write fallback
+Check contents
+0fc6bc93cd0cd97e3cde5ea39ea1185d SCSI_DEBUG_DEV
+Destroy device
@@ -345,3 +345,6 @@
340 auto
341 auto quick metadata
342 auto quick metadata
+705 blockdev quick rw
+706 blockdev quick rw
+707 blockdev quick rw
Now that we're wiring up fallocate's PUNCH_HOLE and ZERO_RANGE features for block devices, add some tests to make sure they work correctly. v2: Update tests to reflect EOD clamping suggested by Linus. Note that the VFS fallocate makes us play some weird games wrt MAX_LFS_FILESIZE. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- common/scsi_debug | 6 ++ tests/generic/705 | 89 ++++++++++++++++++++++++++++++++++ tests/generic/705.out | 11 ++++ tests/generic/706 | 86 ++++++++++++++++++++++++++++++++ tests/generic/706.out | 10 ++++ tests/generic/707 | 130 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/707.out | 32 ++++++++++++ tests/generic/group | 3 + 8 files changed, 366 insertions(+), 1 deletion(-) create mode 100755 tests/generic/705 create mode 100644 tests/generic/705.out create mode 100755 tests/generic/706 create mode 100644 tests/generic/706.out create mode 100755 tests/generic/707 create mode 100644 tests/generic/707.out -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel