diff mbox series

[v10,2/7] fs: crypto: invoke crypto API for ESSIV handling

Message ID 20190812145324.27090-3-ard.biesheuvel@linaro.org (mailing list archive)
State Superseded, archived
Delegated to: Mike Snitzer
Headers show
Series crypto: switch to crypto API for ESSIV generation | expand

Commit Message

Ard Biesheuvel Aug. 12, 2019, 2:53 p.m. UTC
Instead of open coding the calculations for ESSIV handling, use a
ESSIV skcipher which does all of this under the hood.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 fs/crypto/Kconfig           |  1 +
 fs/crypto/crypto.c          |  5 --
 fs/crypto/fscrypt_private.h |  9 --
 fs/crypto/keyinfo.c         | 92 +-------------------
 4 files changed, 4 insertions(+), 103 deletions(-)

Comments

Eric Biggers Aug. 12, 2019, 7:47 p.m. UTC | #1
On Mon, Aug 12, 2019 at 05:53:19PM +0300, Ard Biesheuvel wrote:
> Instead of open coding the calculations for ESSIV handling, use a
> ESSIV skcipher which does all of this under the hood.
> 
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

This looks fine (except for one comment below), but this heavily conflicts with
the fscrypt patches planned for v5.4.  So I suggest moving this to the end of
the series and having Herbert take only 1-6, and I'll apply this one to the
fscrypt tree later.

Thanks!

> ---
>  fs/crypto/Kconfig           |  1 +
>  fs/crypto/crypto.c          |  5 --
>  fs/crypto/fscrypt_private.h |  9 --
>  fs/crypto/keyinfo.c         | 92 +-------------------
>  4 files changed, 4 insertions(+), 103 deletions(-)
> 
> diff --git a/fs/crypto/Kconfig b/fs/crypto/Kconfig
> index 5fdf24877c17..6f3d59b880b7 100644
> --- a/fs/crypto/Kconfig
> +++ b/fs/crypto/Kconfig
> @@ -5,6 +5,7 @@ config FS_ENCRYPTION
>  	select CRYPTO_AES
>  	select CRYPTO_CBC
>  	select CRYPTO_ECB
> +	select CRYPTO_ESSIV
>  	select CRYPTO_XTS
>  	select CRYPTO_CTS
>  	select KEYS

In v5.3 I removed the 'select CRYPTO_SHA256', so now ESSIV shouldn't be selected
here either.  Instead we should just update the documentation:

diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst
index 82efa41b0e6c02..a1e2ab12a99943 100644
--- a/Documentation/filesystems/fscrypt.rst
+++ b/Documentation/filesystems/fscrypt.rst
@@ -193,7 +193,8 @@ If unsure, you should use the (AES-256-XTS, AES-256-CTS-CBC) pair.
 AES-128-CBC was added only for low-powered embedded devices with
 crypto accelerators such as CAAM or CESA that do not support XTS.  To
 use AES-128-CBC, CONFIG_CRYPTO_SHA256 (or another SHA-256
-implementation) must be enabled so that ESSIV can be used.
+implementation) and CONFIG_CRYPTO_ESSIV must be enabled so that ESSIV
+can be used.
 
 Adiantum is a (primarily) stream cipher-based mode that is fast even
 on CPUs without dedicated crypto instructions.  It's also a true

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
Ard Biesheuvel Aug. 13, 2019, 5:09 a.m. UTC | #2
On Mon, 12 Aug 2019 at 22:47, Eric Biggers <ebiggers@kernel.org> wrote:
>
> On Mon, Aug 12, 2019 at 05:53:19PM +0300, Ard Biesheuvel wrote:
> > Instead of open coding the calculations for ESSIV handling, use a
> > ESSIV skcipher which does all of this under the hood.
> >
> > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>
> This looks fine (except for one comment below), but this heavily conflicts with
> the fscrypt patches planned for v5.4.  So I suggest moving this to the end of
> the series and having Herbert take only 1-6, and I'll apply this one to the
> fscrypt tree later.
>

I think the same applies to dm-crypt: at least patch #7 cannot be
applied until my eboiv patch is applied there as well, but [Milan
should confirm] I'd expect them to prefer taking those patches via the
dm tree anyway.

Herbert, what would you prefer:
- taking a pull request from a [signed] tag based on v4.3-rc1 that
contains patches #1, #4, #5 and #6, allowing Eric and Milan/Mike to
merge it as well, and apply the respective fscrypt and dm-crypt
changes on top
- just take patches #1, #4, #5 and #6 as usual, and let the fscrypt
and dm-crypt changes be reposted to the respective lists during the
next cycle


>
> > ---
> >  fs/crypto/Kconfig           |  1 +
> >  fs/crypto/crypto.c          |  5 --
> >  fs/crypto/fscrypt_private.h |  9 --
> >  fs/crypto/keyinfo.c         | 92 +-------------------
> >  4 files changed, 4 insertions(+), 103 deletions(-)
> >
> > diff --git a/fs/crypto/Kconfig b/fs/crypto/Kconfig
> > index 5fdf24877c17..6f3d59b880b7 100644
> > --- a/fs/crypto/Kconfig
> > +++ b/fs/crypto/Kconfig
> > @@ -5,6 +5,7 @@ config FS_ENCRYPTION
> >       select CRYPTO_AES
> >       select CRYPTO_CBC
> >       select CRYPTO_ECB
> > +     select CRYPTO_ESSIV
> >       select CRYPTO_XTS
> >       select CRYPTO_CTS
> >       select KEYS
>
> In v5.3 I removed the 'select CRYPTO_SHA256', so now ESSIV shouldn't be selected
> here either.  Instead we should just update the documentation:
>
> diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst
> index 82efa41b0e6c02..a1e2ab12a99943 100644
> --- a/Documentation/filesystems/fscrypt.rst
> +++ b/Documentation/filesystems/fscrypt.rst
> @@ -193,7 +193,8 @@ If unsure, you should use the (AES-256-XTS, AES-256-CTS-CBC) pair.
>  AES-128-CBC was added only for low-powered embedded devices with
>  crypto accelerators such as CAAM or CESA that do not support XTS.  To
>  use AES-128-CBC, CONFIG_CRYPTO_SHA256 (or another SHA-256
> -implementation) must be enabled so that ESSIV can be used.
> +implementation) and CONFIG_CRYPTO_ESSIV must be enabled so that ESSIV
> +can be used.
>
>  Adiantum is a (primarily) stream cipher-based mode that is fast even
>  on CPUs without dedicated crypto instructions.  It's also a true

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
Eric Biggers Aug. 13, 2019, 6 p.m. UTC | #3
On Tue, Aug 13, 2019 at 08:09:41AM +0300, Ard Biesheuvel wrote:
> On Mon, 12 Aug 2019 at 22:47, Eric Biggers <ebiggers@kernel.org> wrote:
> >
> > On Mon, Aug 12, 2019 at 05:53:19PM +0300, Ard Biesheuvel wrote:
> > > Instead of open coding the calculations for ESSIV handling, use a
> > > ESSIV skcipher which does all of this under the hood.
> > >
> > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >
> > This looks fine (except for one comment below), but this heavily conflicts with
> > the fscrypt patches planned for v5.4.  So I suggest moving this to the end of
> > the series and having Herbert take only 1-6, and I'll apply this one to the
> > fscrypt tree later.
> >
> 
> I think the same applies to dm-crypt: at least patch #7 cannot be
> applied until my eboiv patch is applied there as well, but [Milan
> should confirm] I'd expect them to prefer taking those patches via the
> dm tree anyway.
> 
> Herbert, what would you prefer:
> - taking a pull request from a [signed] tag based on v4.3-rc1 that
> contains patches #1, #4, #5 and #6, allowing Eric and Milan/Mike to
> merge it as well, and apply the respective fscrypt and dm-crypt
> changes on top
> - just take patches #1, #4, #5 and #6 as usual, and let the fscrypt
> and dm-crypt changes be reposted to the respective lists during the
> next cycle
> 

FWIW I'd much prefer the second option, to minimize the number of special things
that Linus will have to consider or deal with.  (There's also going to be a
conflict between the fscrypt and keyrings trees.)  I'd be glad to take the
fscrypt patch for 5.5, if the essiv template is added in 5.4.

- Eric

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
Ard Biesheuvel Aug. 13, 2019, 6:16 p.m. UTC | #4
On Tue, 13 Aug 2019 at 21:00, Eric Biggers <ebiggers@kernel.org> wrote:
>
> On Tue, Aug 13, 2019 at 08:09:41AM +0300, Ard Biesheuvel wrote:
> > On Mon, 12 Aug 2019 at 22:47, Eric Biggers <ebiggers@kernel.org> wrote:
> > >
> > > On Mon, Aug 12, 2019 at 05:53:19PM +0300, Ard Biesheuvel wrote:
> > > > Instead of open coding the calculations for ESSIV handling, use a
> > > > ESSIV skcipher which does all of this under the hood.
> > > >
> > > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > >
> > > This looks fine (except for one comment below), but this heavily conflicts with
> > > the fscrypt patches planned for v5.4.  So I suggest moving this to the end of
> > > the series and having Herbert take only 1-6, and I'll apply this one to the
> > > fscrypt tree later.
> > >
> >
> > I think the same applies to dm-crypt: at least patch #7 cannot be
> > applied until my eboiv patch is applied there as well, but [Milan
> > should confirm] I'd expect them to prefer taking those patches via the
> > dm tree anyway.
> >
> > Herbert, what would you prefer:
> > - taking a pull request from a [signed] tag based on v4.3-rc1 that
> > contains patches #1, #4, #5 and #6, allowing Eric and Milan/Mike to
> > merge it as well, and apply the respective fscrypt and dm-crypt
> > changes on top
> > - just take patches #1, #4, #5 and #6 as usual, and let the fscrypt
> > and dm-crypt changes be reposted to the respective lists during the
> > next cycle
> >
>
> FWIW I'd much prefer the second option, to minimize the number of special things
> that Linus will have to consider or deal with.  (There's also going to be a
> conflict between the fscrypt and keyrings trees.)  I'd be glad to take the
> fscrypt patch for 5.5, if the essiv template is added in 5.4.
>

Works for me. I'll respin with the dm-crypt and fscrypt patches
omitted (and the minor fixes you suggested applied).

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
diff mbox series

Patch

diff --git a/fs/crypto/Kconfig b/fs/crypto/Kconfig
index 5fdf24877c17..6f3d59b880b7 100644
--- a/fs/crypto/Kconfig
+++ b/fs/crypto/Kconfig
@@ -5,6 +5,7 @@  config FS_ENCRYPTION
 	select CRYPTO_AES
 	select CRYPTO_CBC
 	select CRYPTO_ECB
+	select CRYPTO_ESSIV
 	select CRYPTO_XTS
 	select CRYPTO_CTS
 	select KEYS
diff --git a/fs/crypto/crypto.c b/fs/crypto/crypto.c
index 45c3d0427fb2..fd13231c5ff6 100644
--- a/fs/crypto/crypto.c
+++ b/fs/crypto/crypto.c
@@ -143,9 +143,6 @@  void fscrypt_generate_iv(union fscrypt_iv *iv, u64 lblk_num,
 
 	if (ci->ci_flags & FS_POLICY_FLAG_DIRECT_KEY)
 		memcpy(iv->nonce, ci->ci_nonce, FS_KEY_DERIVATION_NONCE_SIZE);
-
-	if (ci->ci_essiv_tfm != NULL)
-		crypto_cipher_encrypt_one(ci->ci_essiv_tfm, iv->raw, iv->raw);
 }
 
 /* Encrypt or decrypt a single filesystem block of file contents */
@@ -523,8 +520,6 @@  static void __exit fscrypt_exit(void)
 		destroy_workqueue(fscrypt_read_workqueue);
 	kmem_cache_destroy(fscrypt_ctx_cachep);
 	kmem_cache_destroy(fscrypt_info_cachep);
-
-	fscrypt_essiv_cleanup();
 }
 module_exit(fscrypt_exit);
 
diff --git a/fs/crypto/fscrypt_private.h b/fs/crypto/fscrypt_private.h
index 8978eec9d766..2fc6f0bd2d13 100644
--- a/fs/crypto/fscrypt_private.h
+++ b/fs/crypto/fscrypt_private.h
@@ -61,12 +61,6 @@  struct fscrypt_info {
 	/* The actual crypto transform used for encryption and decryption */
 	struct crypto_skcipher *ci_ctfm;
 
-	/*
-	 * Cipher for ESSIV IV generation.  Only set for CBC contents
-	 * encryption, otherwise is NULL.
-	 */
-	struct crypto_cipher *ci_essiv_tfm;
-
 	/*
 	 * Encryption mode used for this inode.  It corresponds to either
 	 * ci_data_mode or ci_filename_mode, depending on the inode type.
@@ -163,9 +157,6 @@  struct fscrypt_mode {
 	int keysize;
 	int ivsize;
 	bool logged_impl_name;
-	bool needs_essiv;
 };
 
-extern void __exit fscrypt_essiv_cleanup(void);
-
 #endif /* _FSCRYPT_PRIVATE_H */
diff --git a/fs/crypto/keyinfo.c b/fs/crypto/keyinfo.c
index 207ebed918c1..80924a0f72ca 100644
--- a/fs/crypto/keyinfo.c
+++ b/fs/crypto/keyinfo.c
@@ -14,12 +14,9 @@ 
 #include <linux/scatterlist.h>
 #include <crypto/aes.h>
 #include <crypto/algapi.h>
-#include <crypto/sha.h>
 #include <crypto/skcipher.h>
 #include "fscrypt_private.h"
 
-static struct crypto_shash *essiv_hash_tfm;
-
 /* Table of keys referenced by FS_POLICY_FLAG_DIRECT_KEY policies */
 static DEFINE_HASHTABLE(fscrypt_master_keys, 6); /* 6 bits = 64 buckets */
 static DEFINE_SPINLOCK(fscrypt_master_keys_lock);
@@ -143,10 +140,9 @@  static struct fscrypt_mode available_modes[] = {
 	},
 	[FS_ENCRYPTION_MODE_AES_128_CBC] = {
 		.friendly_name = "AES-128-CBC",
-		.cipher_str = "cbc(aes)",
+		.cipher_str = "essiv(cbc(aes),sha256)",
 		.keysize = 16,
 		.ivsize = 16,
-		.needs_essiv = true,
 	},
 	[FS_ENCRYPTION_MODE_AES_128_CTS] = {
 		.friendly_name = "AES-128-CTS-CBC",
@@ -376,72 +372,6 @@  fscrypt_get_master_key(const struct fscrypt_info *ci, struct fscrypt_mode *mode,
 	return ERR_PTR(err);
 }
 
-static int derive_essiv_salt(const u8 *key, int keysize, u8 *salt)
-{
-	struct crypto_shash *tfm = READ_ONCE(essiv_hash_tfm);
-
-	/* init hash transform on demand */
-	if (unlikely(!tfm)) {
-		struct crypto_shash *prev_tfm;
-
-		tfm = crypto_alloc_shash("sha256", 0, 0);
-		if (IS_ERR(tfm)) {
-			fscrypt_warn(NULL,
-				     "error allocating SHA-256 transform: %ld",
-				     PTR_ERR(tfm));
-			return PTR_ERR(tfm);
-		}
-		prev_tfm = cmpxchg(&essiv_hash_tfm, NULL, tfm);
-		if (prev_tfm) {
-			crypto_free_shash(tfm);
-			tfm = prev_tfm;
-		}
-	}
-
-	{
-		SHASH_DESC_ON_STACK(desc, tfm);
-		desc->tfm = tfm;
-
-		return crypto_shash_digest(desc, key, keysize, salt);
-	}
-}
-
-static int init_essiv_generator(struct fscrypt_info *ci, const u8 *raw_key,
-				int keysize)
-{
-	int err;
-	struct crypto_cipher *essiv_tfm;
-	u8 salt[SHA256_DIGEST_SIZE];
-
-	essiv_tfm = crypto_alloc_cipher("aes", 0, 0);
-	if (IS_ERR(essiv_tfm))
-		return PTR_ERR(essiv_tfm);
-
-	ci->ci_essiv_tfm = essiv_tfm;
-
-	err = derive_essiv_salt(raw_key, keysize, salt);
-	if (err)
-		goto out;
-
-	/*
-	 * Using SHA256 to derive the salt/key will result in AES-256 being
-	 * used for IV generation. File contents encryption will still use the
-	 * configured keysize (AES-128) nevertheless.
-	 */
-	err = crypto_cipher_setkey(essiv_tfm, salt, sizeof(salt));
-	if (err)
-		goto out;
-
-out:
-	memzero_explicit(salt, sizeof(salt));
-	return err;
-}
-
-void __exit fscrypt_essiv_cleanup(void)
-{
-	crypto_free_shash(essiv_hash_tfm);
-}
-
 /*
  * Given the encryption mode and key (normally the derived key, but for
  * FS_POLICY_FLAG_DIRECT_KEY mode it's the master key), set up the inode's
@@ -453,7 +383,6 @@  static int setup_crypto_transform(struct fscrypt_info *ci,
 {
 	struct fscrypt_master_key *mk;
 	struct crypto_skcipher *ctfm;
-	int err;
 
 	if (ci->ci_flags & FS_POLICY_FLAG_DIRECT_KEY) {
 		mk = fscrypt_get_master_key(ci, mode, raw_key, inode);
@@ -469,19 +398,6 @@  static int setup_crypto_transform(struct fscrypt_info *ci,
 	ci->ci_master_key = mk;
 	ci->ci_ctfm = ctfm;
 
-	if (mode->needs_essiv) {
-		/* ESSIV implies 16-byte IVs which implies !DIRECT_KEY */
-		WARN_ON(mode->ivsize != AES_BLOCK_SIZE);
-		WARN_ON(ci->ci_flags & FS_POLICY_FLAG_DIRECT_KEY);
-
-		err = init_essiv_generator(ci, raw_key, mode->keysize);
-		if (err) {
-			fscrypt_warn(inode->i_sb,
-				     "error initializing ESSIV generator for inode %lu: %d",
-				     inode->i_ino, err);
-			return err;
-		}
-	}
 	return 0;
 }
 
@@ -490,12 +406,10 @@  static void put_crypt_info(struct fscrypt_info *ci)
 	if (!ci)
 		return;
 
-	if (ci->ci_master_key) {
+	if (ci->ci_master_key)
 		put_master_key(ci->ci_master_key);
-	} else {
+	else
 		crypto_free_skcipher(ci->ci_ctfm);
-		crypto_free_cipher(ci->ci_essiv_tfm);
-	}
 	kmem_cache_free(fscrypt_info_cachep, ci);
 }