diff mbox series

[6/7] dm-zone: use generic helpers to calculate offset from zone start

Message ID 20230106083317.93938-7-p.raghav@samsung.com (mailing list archive)
State New, archived
Headers show
Series [1/7] block: remove superfluous check for request queue in bdev_is_zoned | expand

Commit Message

Pankaj Raghav Jan. 6, 2023, 8:33 a.m. UTC 
Use the bdev_offset_from_zone_start() helper function to calculate
the offset from zone start instead of open coding.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
---
 drivers/md/dm-zone.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

Comments

Christoph Hellwig Jan. 10, 2023, 6:57 a.m. UTC | #1 
On Fri, Jan 06, 2023 at 09:33:16AM +0100, Pankaj Raghav wrote:
> Use the bdev_offset_from_zone_start() helper function to calculate
> the offset from zone start instead of open coding.
> 
> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
> Reviewed-by: Mike Snitzer <snitzer@kernel.org>
> ---
>  drivers/md/dm-zone.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
> index 3dafc0e8b7a9..ac6fc1293d41 100644
> --- a/drivers/md/dm-zone.c
> +++ b/drivers/md/dm-zone.c
> @@ -390,7 +390,8 @@ static bool dm_zone_map_bio_begin(struct mapped_device *md,
>  	case REQ_OP_WRITE_ZEROES:
>  	case REQ_OP_WRITE:
>  		/* Writes must be aligned to the zone write pointer */
> -		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
> +		if (bdev_offset_from_zone_start(md->disk->part0,
> +						clone->bi_iter.bi_sector) != zwp_offset)

I can't see how this actually cleans antyhing up, while it does add an
overly long line.

>  		if (clone->bi_status == BLK_STS_OK &&
>  		    bio_op(clone) == REQ_OP_ZONE_APPEND) {
>  			orig_bio->bi_iter.bi_sector +=
> -				clone->bi_iter.bi_sector & mask;
> +				bdev_offset_from_zone_start(disk->part0, clone->bi_iter.bi_sector);

Same here.

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
Pankaj Raghav Jan. 10, 2023, 9:06 a.m. UTC | #2 
On 2023-01-10 07:57, Christoph Hellwig wrote:
> On Fri, Jan 06, 2023 at 09:33:16AM +0100, Pankaj Raghav wrote:
>> Use the bdev_offset_from_zone_start() helper function to calculate
>> the offset from zone start instead of open coding.
>>
>> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
>> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
>> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
>> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
>> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
>> Reviewed-by: Mike Snitzer <snitzer@kernel.org>
>> ---
>>  drivers/md/dm-zone.c | 8 +++-----
>>  1 file changed, 3 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
>> index 3dafc0e8b7a9..ac6fc1293d41 100644
>> --- a/drivers/md/dm-zone.c
>> +++ b/drivers/md/dm-zone.c
>> @@ -390,7 +390,8 @@ static bool dm_zone_map_bio_begin(struct mapped_device *md,
>>  	case REQ_OP_WRITE_ZEROES:
>>  	case REQ_OP_WRITE:
>>  		/* Writes must be aligned to the zone write pointer */
>> -		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
>> +		if (bdev_offset_from_zone_start(md->disk->part0,
>> +						clone->bi_iter.bi_sector) != zwp_offset)
> 
> I can't see how this actually cleans antyhing up, while it does add an
> overly long line.
>
While I do agree with the overly long line comment, I feel it makes the
intent more clear, as it is easy to overlook this math operation.

>>  		if (clone->bi_status == BLK_STS_OK &&
>>  		    bio_op(clone) == REQ_OP_ZONE_APPEND) {
>>  			orig_bio->bi_iter.bi_sector +=
>> -				clone->bi_iter.bi_sector & mask;
>> +				bdev_offset_from_zone_start(disk->part0, clone->bi_iter.bi_sector);
> 
> Same here.

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
diff mbox series

Patch

diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index 3dafc0e8b7a9..ac6fc1293d41 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -390,7 +390,8 @@  static bool dm_zone_map_bio_begin(struct mapped_device *md,
 	case REQ_OP_WRITE_ZEROES:
 	case REQ_OP_WRITE:
 		/* Writes must be aligned to the zone write pointer */
-		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
+		if (bdev_offset_from_zone_start(md->disk->part0,
+						clone->bi_iter.bi_sector) != zwp_offset)
 			return false;
 		break;
 	case REQ_OP_ZONE_APPEND:
@@ -602,11 +603,8 @@  void dm_zone_endio(struct dm_io *io, struct bio *clone)
 		 */
 		if (clone->bi_status == BLK_STS_OK &&
 		    bio_op(clone) == REQ_OP_ZONE_APPEND) {
-			sector_t mask =
-				(sector_t)bdev_zone_sectors(disk->part0) - 1;
-
 			orig_bio->bi_iter.bi_sector +=
-				clone->bi_iter.bi_sector & mask;
+				bdev_offset_from_zone_start(disk->part0, clone->bi_iter.bi_sector);
 		}
 
 		return;