[v9,06/10] block: Add atomic write support for statx

Commit Message

John Garry June 20, 2024, 12:53 p.m. UTC

From: Prasad Singamsetty <[e-mail]>

Extend statx system call to return additional info for atomic write support
support if the specified file is a block device.

Reviewed-by: Martin K. Petersen <[e-mail]>
Signed-off-by: Prasad Singamsetty <[e-mail]>
Signed-off-by: John Garry <[e-mail]>
---
 block/bdev.c           | 36 ++++++++++++++++++++++++++----------
 fs/stat.c              | 16 +++++++++-------
 include/linux/blkdev.h |  6 ++++--
 3 files changed, 39 insertions(+), 19 deletions(-)

Comments

Keith Busch June 20, 2024, 7:46 p.m. UTC | #1

On Thu, Jun 20, 2024 at 12:53:55PM +0000, John Garry wrote:
> From: Prasad Singamsetty <[e-mail]>
> 
> Extend statx system call to return additional info for atomic write support
> support if the specified file is a block device.

Looks good.

Reviewed-by: Keith Busch <[e-mail]>

Hannes Reinecke June 21, 2024, 6:10 a.m. UTC | #2

On 6/20/24 14:53, John Garry wrote:
> From: Prasad Singamsetty <[e-mail]>
> 
> Extend statx system call to return additional info for atomic write support
> support if the specified file is a block device.
> 
> Reviewed-by: Martin K. Petersen <[e-mail]>
> Signed-off-by: Prasad Singamsetty <[e-mail]>
> Signed-off-by: John Garry <[e-mail]>
> ---
>   block/bdev.c           | 36 ++++++++++++++++++++++++++----------
>   fs/stat.c              | 16 +++++++++-------
>   include/linux/blkdev.h |  6 ++++--
>   3 files changed, 39 insertions(+), 19 deletions(-)
> 
Reviewed-by: Hannes Reinecke <[e-mail]>

Cheers,

Hannes

Patch

diff --git a/block/bdev.c b/block/bdev.c
index 353677ac49b3..3976a652fcc7 100644
--- a/block/bdev.c
+++ b/block/bdev.c
@@ -1260,23 +1260,39 @@  void sync_bdevs(bool wait)
 }
 
 /*
- * Handle STATX_DIOALIGN for block devices.
- *
- * Note that the inode passed to this is the inode of a block device node file,
- * not the block device's internal inode.  Therefore it is *not* valid to use
- * I_BDEV() here; the block device has to be looked up by i_rdev instead.
+ * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices.
  */
-void bdev_statx_dioalign(struct inode *inode, struct kstat *stat)
+void bdev_statx(struct inode *backing_inode, struct kstat *stat,
+		u32 request_mask)
 {
 	struct block_device *bdev;
 
-	bdev = blkdev_get_no_open(inode->i_rdev);
+	if (!(request_mask & (STATX_DIOALIGN | STATX_WRITE_ATOMIC)))
+		return;
+
+	/*
+	 * Note that backing_inode is the inode of a block device node file,
+	 * not the block device's internal inode.  Therefore it is *not* valid
+	 * to use I_BDEV() here; the block device has to be looked up by i_rdev
+	 * instead.
+	 */
+	bdev = blkdev_get_no_open(backing_inode->i_rdev);
 	if (!bdev)
 		return;
 
-	stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
-	stat->dio_offset_align = bdev_logical_block_size(bdev);
-	stat->result_mask |= STATX_DIOALIGN;
+	if (request_mask & STATX_DIOALIGN) {
+		stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
+		stat->dio_offset_align = bdev_logical_block_size(bdev);
+		stat->result_mask |= STATX_DIOALIGN;
+	}
+
+	if (request_mask & STATX_WRITE_ATOMIC && bdev_can_atomic_write(bdev)) {
+		struct request_queue *bd_queue = bdev->bd_queue;
+
+		generic_fill_statx_atomic_writes(stat,
+			queue_atomic_write_unit_min_bytes(bd_queue),
+			queue_atomic_write_unit_max_bytes(bd_queue));
+	}
 
 	blkdev_put_no_open(bdev);
 }
diff --git a/fs/stat.c b/fs/stat.c
index 72d0e6357b91..bd0698dfd7b3 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -265,6 +265,7 @@  static int vfs_statx(int dfd, struct filename *filename, int flags,
 {
 	struct path path;
 	unsigned int lookup_flags = getname_statx_lookup_flags(flags);
+	struct inode *backing_inode;
 	int error;
 
 	if (flags & ~(AT_SYMLINK_NOFOLLOW | AT_NO_AUTOMOUNT | AT_EMPTY_PATH |
@@ -290,13 +291,14 @@  static int vfs_statx(int dfd, struct filename *filename, int flags,
 		stat->attributes |= STATX_ATTR_MOUNT_ROOT;
 	stat->attributes_mask |= STATX_ATTR_MOUNT_ROOT;
 
-	/* Handle STATX_DIOALIGN for block devices. */
-	if (request_mask & STATX_DIOALIGN) {
-		struct inode *inode = d_backing_inode(path.dentry);
-
-		if (S_ISBLK(inode->i_mode))
-			bdev_statx_dioalign(inode, stat);
-	}
+	/*
+	 * If this is a block device inode, override the filesystem
+	 * attributes with the block device specific parameters that need to be
+	 * obtained from the bdev backing inode.
+	 */
+	backing_inode = d_backing_inode(path.dentry);
+	if (S_ISBLK(backing_inode->i_mode))
+		bdev_statx(backing_inode, stat, request_mask);
 
 	path_put(&path);
 	if (retry_estale(error, lookup_flags)) {
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index c0a5a061f8b9..5e024b2b1311 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1644,7 +1644,8 @@  int sync_blockdev(struct block_device *bdev);
 int sync_blockdev_range(struct block_device *bdev, loff_t lstart, loff_t lend);
 int sync_blockdev_nowait(struct block_device *bdev);
 void sync_bdevs(bool wait);
-void bdev_statx_dioalign(struct inode *inode, struct kstat *stat);
+void bdev_statx(struct inode *backing_inode, struct kstat *stat,
+		u32 request_mask);
 void printk_all_partitions(void);
 int __init early_lookup_bdev(const char *pathname, dev_t *dev);
 #else
@@ -1662,7 +1663,8 @@  static inline int sync_blockdev_nowait(struct block_device *bdev)
 static inline void sync_bdevs(bool wait)
 {
 }
-static inline void bdev_statx_dioalign(struct inode *inode, struct kstat *stat)
+static inline void bdev_statx(struct inode *backing_inode, struct kstat *stat,
+				u32 request_mask)
 {
 }
 static inline void printk_all_partitions(void)