diff mbox

[2/2] block: blk_set_default_limits sets 0 to max_sectors

Message ID 4AB3A4DA.90309@ce.jp.nec.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Junichi Nomura Sept. 18, 2009, 3:18 p.m. UTC 
max_sectors and max_hw_sectors of dm device are set to smaller values
than those of underlying devices.  E.g:
    # cat /sys/block/sdj/queue/max_sectors_kb
    512
    # cat /sys/block/sdj/queue/max_hw_sectors_kb
    32767
    # echo "0 10 linear /dev/sdj 0" | dmsetup create test
    # cat /sys/block/dm-0/queue/max_sectors_kb
    127
    # cat /sys/block/dm-0/queue/max_hw_sectors_kb
    127
This prevents the I/O size of struct request from becoming large,
and causes undesired request fragmentation in request-based dm.

This is caused by the queue_limits stacking.
In dm_calculate_queue_limits(), the block-layer's safe default value
(SAFE_MAX_SECTORS, 255) is included in the merging process of target's
queue_limits. So underlying queue_limits is not propagated correctly.

Initialize default values of all max_sectors to '0'
in blk_set_default_limits() so that the values propagate properly
from underlying devices.

Check this thread for further background:
https://www.redhat.com/archives/dm-devel/2009-September/msg00176.html

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Reported-by: David Strand <dpstrand@gmail.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-settings.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
diff mbox

Patch

Index: linux-2.6.31.work/block/blk-settings.c
===================================================================
--- linux-2.6.31.work.orig/block/blk-settings.c
+++ linux-2.6.31.work/block/blk-settings.c
@@ -111,7 +111,7 @@  void blk_set_default_limits(struct queue
 	lim->max_hw_segments = MAX_HW_SEGMENTS;
 	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
 	lim->max_segment_size = MAX_SEGMENT_SIZE;
-	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+	lim->max_sectors = lim->max_hw_sectors = 0;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
 	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
@@ -164,6 +164,7 @@  void blk_queue_make_request(struct reque
 	q->unplug_timer.data = (unsigned long)q;

 	blk_set_default_limits(&q->limits);
+	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);

 	/*
 	 * If the caller didn't supply a lock, fall back to our embedded