mbox series

[v2,0/6] fixes for atmel-hlcdc

Message ID 1576249496-4849-1-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
Headers show
Series fixes for atmel-hlcdc | expand

Message

Claudiu Beznea Dec. 13, 2019, 3:04 p.m. UTC
Hi,

I have few fixes for atmel-hlcdc driver in this series as well
as two reverts.
Revert "drm: atmel-hlcdc: enable sys_clk during initalization." is
due to the fix in in patch 2/5.

Thank you,
Claudiu Beznea

Changes in v2:
- introduce patch 3/6
- use dev_err() inpatch 4/6
- introduce patch 5/6 instead of reverting commit f6f7ad323461
  ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")

Claudiu Beznea (5):
  drm: atmel-hlcdc: use double rate for pixel clock only if supported
  drm: atmel-hlcdc: enable clock before configuring timing engine
  mfd: atmel-hlcdc: add struct device member to struct
    atmel_hlcdc_regmap
  mfd: atmel-hlcdc: return in case of error
  Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

Peter Rosin (1):
  drm: atmel-hlcdc: prefer a lower pixel-clock than requested

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 18 ++++++++++++------
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c   | 19 +------------------
 drivers/mfd/atmel-hlcdc.c                      | 18 ++++++++++++++----
 3 files changed, 27 insertions(+), 28 deletions(-)