[v6,0/9] Enable ili9341 and l3gd20 on stm32f429-disco

Message

Dillon Min May 27, 2020, 7:27 a.m. UTC

From: dillon min <[e-mail]>

V6:
1 separate '[PATCH v5 5/8]' patchs to two, each one has a Fixes tags according
  to Stephen Boyd's suggestion
2 fix panel-ilitek-ili9341 compile warning 'warning: Function parameter or
  member xxx not described in xxx' with W=1

V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
for SPI_SIMPLEX_RX mode on stm32 spi controller.

V5:
1 instead of add send dummy data out under SIMPLEX_RX mode,
  add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
  'SPI_3WIRE' mode

V4:
  According to alexandre torgue's suggestion, combine ili9341 and
  l3gd20's modification on stm32f429-disco board to one patchset.

Changes:

ili9341:

1 update ili9341 panel driver according to Linus's suggestion
2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
3 merge l3gd20's change to this patchset

V3:
1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
  to support serial spi & parallel rgb interface in one driver.
2 update ilitek,ili9341.yaml dts binding documentation.
3 update stm32f429-disco dts binding

V2:
1 verify ilitek,ili9341.yaml with make O=../linux-stm32
  dt_binding_check
  DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
  ilitek,ili9341.yaml

V1:
1 add ili9341 drm panel driver
2 add ltdc, spi5 controller for stm32f429-disco
3 add ltdc, spi5 pin map for stm32f429-disco
4 add docs about ili9341
5 fix ltdc driver loading hang in clk set rate bug


L3gd20:

V3:
1 merge stm32f429-disco dtbs binding with ili9341 part

V2:
1 insert blank line at stm32f420-disco.dts line 143
2 add more description for l3gd20 in commit message

V1:
1 enable spi5 controller on stm32f429-disco (dts)
2 add spi5 pinmap for stm32f429-disco  (dts)
3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4


dillon min (9):
  ARM: dts: stm32: Add dma config for spi5
  ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
  ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on    
    stm32429-disco board
  dt-bindings: display: panel: Add ilitek ili9341 panel bindings
  clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after
    kernel     startup
  drm/panel: Add ilitek ili9341 panel driver
  spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
  spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
    be     coexit with 'SPI_3WIRE' mode

 .../bindings/display/panel/ilitek,ili9341.yaml     |   69 ++
 arch/arm/boot/dts/stm32f4-pinctrl.dtsi             |   67 +
 arch/arm/boot/dts/stm32f429-disco.dts              |   48 +
 arch/arm/boot/dts/stm32f429.dtsi                   |    3 +
 drivers/clk/clk-stm32f4.c                          |    7 +-
 drivers/gpu/drm/panel/Kconfig                      |   12 +
 drivers/gpu/drm/panel/Makefile                     |    1 +
 drivers/gpu/drm/panel/panel-ilitek-ili9341.c       | 1288 ++++++++++++++++++++
 drivers/spi/spi-stm32.c                            |   19 +-
 drivers/spi/spi.c                                  |    3 +-
 10 files changed, 1508 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c

Comments

Alexandre TORGUE June 15, 2020, 8:49 a.m. UTC | #1

Hi Dillon,

On 5/27/20 9:27 AM, [e-mail] wrote:
> From: dillon min <[e-mail]>

...

> dillon min (9):
>    ARM: dts: stm32: Add dma config for spi5
>    ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
>    ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
>      stm32429-disco board
>    dt-bindings: display: panel: Add ilitek ili9341 panel bindings
>    clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
>    clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after
>      kernel     startup
>    drm/panel: Add ilitek ili9341 panel driver
>    spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
>    spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
>      be     coexit with 'SPI_3WIRE' mode
> 
>   .../bindings/display/panel/ilitek,ili9341.yaml     |   69 ++
>   arch/arm/boot/dts/stm32f4-pinctrl.dtsi             |   67 +
>   arch/arm/boot/dts/stm32f429-disco.dts              |   48 +
>   arch/arm/boot/dts/stm32f429.dtsi                   |    3 +
>   drivers/clk/clk-stm32f4.c                          |    7 +-
>   drivers/gpu/drm/panel/Kconfig                      |   12 +
>   drivers/gpu/drm/panel/Makefile                     |    1 +
>   drivers/gpu/drm/panel/panel-ilitek-ili9341.c       | 1288 ++++++++++++++++++++
>   drivers/spi/spi-stm32.c                            |   19 +-
>   drivers/spi/spi.c                                  |    3 +-
>   10 files changed, 1508 insertions(+), 9 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
>   create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> 

DT patches (patch 1 to 3) applied on stm32-next. I assume that binding 
one will go with drm/panel driver patch.

Thanks
Alex