mbox series

[PATCHv3,00/23] drm/bridge: tc358767: DP support

Message ID 20190503122949.12266-1-tomi.valkeinen@ti.com (mailing list archive)
Headers show
Series drm/bridge: tc358767: DP support | expand

Message

Tomi Valkeinen May 3, 2019, 12:29 p.m. UTC
Hi,

tc358767 bridge was originally implemented for eDP use with an embedded
panel. I've been working to add DP and HPD support, and this series is
the result. I did have a lot of issues with link training, but with
these, it's been working reliably with my devices.

Changes in v2
* Drop "implement naive HPD handling", and implement HPD interrupt handling.

Changes in v3
* Various small comment, description and formatting changes
* 'hpd-num' DT property renamed to 'toshiba,hpd-pin'
* Check DP0CTL == 0 at the beginning of tc_main_link_enable
* Disable only the video stream in tc_stream_disable()
* Fix tc_connector_detect for eDP panels

 Tomi

Tomi Valkeinen (23):
  drm/bridge: tc358767: fix tc_aux_get_status error handling
  drm/bridge: tc358767: reset voltage-swing & pre-emphasis
  drm/bridge: tc358767: fix ansi 8b10b use
  drm/bridge: tc358767: cleanup spread & scrambler_dis
  drm/bridge: tc358767: remove unused swing & preemp
  drm/bridge: tc358767: cleanup aux_link_setup
  drm/bridge: tc358767: move video stream setup to tc_main_link_stream
  drm/bridge: tc358767: split stream enable/disable
  drm/bridge: tc358767: move PXL PLL enable/disable to stream
    enable/disable
  drm/bridge: tc358767: add link disable function
  drm/bridge: tc358767: disable only video stream in tc_stream_disable
  drm/bridge: tc358767: ensure DP is disabled before LT
  drm/bridge: tc358767: remove unnecessary msleep
  drm/bridge: tc358767: use more reliable seq when finishing LT
  drm/bridge: tc358767: cleanup LT result check
  drm/bridge: tc358767: clean-up link training
  drm/bridge: tc358767: remove check for video mode in link enable
  drm/bridge: tc358767: use bridge mode_valid
  drm/bridge: tc358767: remove tc_connector_best_encoder
  drm/bridge: tc358767: copy the mode data, instead of storing the
    pointer
  drm/bridge: tc358767: add GPIO & interrupt registers
  drm/bridge: tc358767: add IRQ and HPD support
  dt-bindings: tc358767: add HPD support

 .../display/bridge/toshiba,tc358767.txt       |   1 +
 drivers/gpu/drm/bridge/tc358767.c             | 589 +++++++++++-------
 2 files changed, 378 insertions(+), 212 deletions(-)