mbox series

[v2,0/4] drm/vc4: Support HDMI QHD or higher output

Message ID 20200901040759.29992-1-hoegeun.kwon@samsung.com (mailing list archive)
Headers show
Series drm/vc4: Support HDMI QHD or higher output | expand

Message

Hoegeun Kwon Sept. 1, 2020, 4:07 a.m. UTC 
Hi everyone,

There is a problem that the output does not work at a resolution
exceeding FHD. To solve this, we need to adjust the bvb clock at a
resolution exceeding FHD.

Rebased on top of next-20200708 and [1].

[1] : [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline (Maxime's patchset)

Changes from v1:
  - Added dt-bindings documents
  - Change patch order, first fix driver and then device tree

Hoegeun Kwon (4):
  clk: bcm: rpi: Add register to control pixel bvb clk
  drm/vc4: hdmi: Add pixel bvb clock control
  dt-bindings: display: vc4: hdmi: Add bvb clock-names property
  ARM: dts: bcm2711: Add bvb clock for hdmi-pixel

 .../bindings/display/brcm,bcm2711-hdmi.yaml   | 12 ++++++---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts         |  6 +++--
 drivers/clk/bcm/clk-raspberrypi.c             |  1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c                | 25 +++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi.h                |  1 +
 5 files changed, 39 insertions(+), 6 deletions(-)

Comments

Nicolas Saenz Julienne Sept. 8, 2020, 4:11 p.m. UTC | #1 
On Tue, 2020-09-01 at 13:07 +0900, Hoegeun Kwon wrote:
> Hi everyone,
> 
> There is a problem that the output does not work at a resolution
> exceeding FHD. To solve this, we need to adjust the bvb clock at a
> resolution exceeding FHD.
> 
> Rebased on top of next-20200708 and [1].
> 
> [1] : [PATCH v4 00/78] drm/vc4: Support BCM2711 Display Pipeline (Maxime's patchset)
> 
> Changes from v1:
>   - Added dt-bindings documents
>   - Change patch order, first fix driver and then device tree
> 
> Hoegeun Kwon (4):
>   clk: bcm: rpi: Add register to control pixel bvb clk
>   drm/vc4: hdmi: Add pixel bvb clock control
>   dt-bindings: display: vc4: hdmi: Add bvb clock-names property
>   ARM: dts: bcm2711: Add bvb clock for hdmi-pixel
> 
>  .../bindings/display/brcm,bcm2711-hdmi.yaml   | 12 ++++++---
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts         |  6 +++--
>  drivers/clk/bcm/clk-raspberrypi.c             |  1 +
>  drivers/gpu/drm/vc4/vc4_hdmi.c                | 25 +++++++++++++++++++
>  drivers/gpu/drm/vc4/vc4_hdmi.h                |  1 +
>  5 files changed, 39 insertions(+), 6 deletions(-)

Small note to anyone reviewing this, patches 3 & 4 where squashed into this
series: https://lkml.org/lkml/2020/9/3/219

Regards,
Nicolas