mbox series

[v3,00/13] drm/msm: Add Display Stream Compression Support

Message ID 20211116062256.2417186-1-vkoul@kernel.org (mailing list archive)
Headers show
Series drm/msm: Add Display Stream Compression Support | expand

Message

Vinod Koul Nov. 16, 2021, 6:22 a.m. UTC
Display Stream Compression (DSC) compresses the display stream in host which
is later decoded by panel. This series enables this for Qualcomm msm driver.
This was tested on Google Pixel3 phone which use LGE SW43408 panel.
 
The changes include DSC data and hardware block enabling for DPU1 then
support in encoder. We also add support in DSI and introduce required
topology changes.
 
In order for panel to set the DSC parameters we add dsc in drm_panel and set
it from the msm driver.

We still have dsc as a globabl entity. I think while doing DP + DSC we
should be able to update it, right now comprehending the requirements are
bit difficult.
 
Complete changes which enable this for Pixel3 along with panel driver (not
part of this series) and DT changes can be found at:
git.linaro.org/people/vinod.koul/kernel.git pixel/dsc_v3
 
Comments welcome!

Changes since v2:
 - Fix comments by Dimitry except the dsc being global.
 - Move RM patch later for dependency on topology now
 - Add patch for mode valid callback for dsi_mgr
 - Add missing structure documentation patch
 - Fix errors in mode_3d changes
 - Rebase on v5.16-rc1 and test

Changes since v1:
 - Fix various issues spotted by kbuildbot
 - Rebase to v5.15-rc3
 - Remove unused fields and duplicate defines
 - Enable DSC blocks only when DSC is enabled
 - remove sdm845 feature mask, use 0
 - Check for DSC in hw_ctl

Changes since RFC:
 - Drop the DT binding patch as we derive the configuration from panel
 - Drop the drm api patch as we no longer need it (use pps drm api)
 - Fix comments raised by Dimitry
 - Add dsc parameters calculation from downstream

Vinod Koul (13):
  drm/msm/dsi: add support for dsc data
  drm/msm/disp/dpu1: Add support for DSC
  drm/msm/disp/dpu1: Add support for DSC in pingpong block
  drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog
  drm/msm/disp/dpu1: Don't use DSC with mode_3d
  drm/msm/disp/dpu1: Add DSC support in hw_ctl
  drm/msm/disp/dpu1: Add support for DSC in encoder
  drm/msm: Add missing structure documentation
  drm/msm/disp/dpu1: Add support for DSC in topology
  drm/msm/disp/dpu1: Add DSC support in RM
  drm/msm/dsi: add mode valid callback for dsi_mgr
  drm/msm/dsi: Add support for DSC configuration
  drm/msm/dsi: Pass DSC params to drm_panel

 drivers/gpu/drm/msm/Makefile                  |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c   | 158 +++++++++-
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h  |  11 +
 .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  |   2 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |  20 ++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  13 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c    |  14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h    |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 210 +++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |  77 +++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |  13 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   |  32 ++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   |  14 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        |  66 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h        |   1 +
 drivers/gpu/drm/msm/dsi/dsi.h                 |   2 +
 drivers/gpu/drm/msm/dsi/dsi.xml.h             |  10 +
 drivers/gpu/drm/msm/dsi/dsi_host.c            | 285 +++++++++++++++++-
 drivers/gpu/drm/msm/dsi/dsi_manager.c         |  12 +
 drivers/gpu/drm/msm/msm_drv.h                 |  23 ++
 include/drm/drm_panel.h                       |   7 +
 22 files changed, 970 insertions(+), 4 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h