mbox series

[v3,0/3] add Aspeed udc driver for ast2600

Message ID 20220518062043.1075360-1-neal_liu@aspeedtech.com (mailing list archive)
Headers show
Series add Aspeed udc driver for ast2600 | expand

Message

Neal Liu May 18, 2022, 6:20 a.m. UTC
This patch series aim to add Aspeed USB 2.0 Device Controller (udc)
driver, including driver itself, device tree node and documentation.

Change since v2:
- Rename device tree nodes.
- Fix unusual indentation.

Change since v1:
- Fix build test warning reported by kernel test robot.
- Rename proper name for dt-bindings document.

*** BLURB HERE ***

Neal Liu (3):
  usb: gadget: add Aspeed ast2600 udc driver
  ARM: dts: aspeed: Add USB2.0 device controller node
  dt-bindings: usb: add documentation for aspeed udc

 .../bindings/usb/aspeed,ast2600-udc.yaml      |   52 +
 MAINTAINERS                                   |    7 +
 arch/arm/boot/dts/aspeed-g6.dtsi              |   10 +
 drivers/usb/gadget/udc/Kconfig                |   13 +
 drivers/usb/gadget/udc/Makefile               |    1 +
 drivers/usb/gadget/udc/aspeed_udc.c           | 1601 +++++++++++++++++
 6 files changed, 1684 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
 create mode 100644 drivers/usb/gadget/udc/aspeed_udc.c

Comments

Greg Kroah-Hartman May 19, 2022, 3:56 p.m. UTC | #1
On Wed, May 18, 2022 at 02:20:40PM +0800, Neal Liu wrote:
> This patch series aim to add Aspeed USB 2.0 Device Controller (udc)
> driver, including driver itself, device tree node and documentation.
> 
> Change since v2:
> - Rename device tree nodes.
> - Fix unusual indentation.
> 
> Change since v1:
> - Fix build test warning reported by kernel test robot.
> - Rename proper name for dt-bindings document.
> 
> *** BLURB HERE ***

No blurb?
Neal Liu May 20, 2022, 2:31 a.m. UTC | #2
> -----Original Message-----
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: Thursday, May 19, 2022 11:57 PM
> To: Neal Liu <neal_liu@aspeedtech.com>
> Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley <joel@jms.id.au>; Andrew
> Jeffery <andrew@aj.id.au>; Felipe Balbi <balbi@kernel.org>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian K├Ânig <christian.koenig@amd.com>;
> Geert Uytterhoeven <geert@linux-m68k.org>; Li Yang <leoyang.li@nxp.com>;
> linux-aspeed@lists.ozlabs.org; linux-usb@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH v3 0/3] add Aspeed udc driver for ast2600
> 
> On Wed, May 18, 2022 at 02:20:40PM +0800, Neal Liu wrote:
> > This patch series aim to add Aspeed USB 2.0 Device Controller (udc)
> > driver, including driver itself, device tree node and documentation.
> >
> > Change since v2:
> > - Rename device tree nodes.
> > - Fix unusual indentation.
> >
> > Change since v1:
> > - Fix build test warning reported by kernel test robot.
> > - Rename proper name for dt-bindings document.
> >
> > *** BLURB HERE ***
> 
> No blurb?

The blurb is above over this comment. I'll revise it as you suggested.