mbox series

[v8,00/14] Add some DRM bridge drivers support for i.MX8qm/qxp SoCs

Message ID 20220609064931.3068601-1-victor.liu@nxp.com (mailing list archive)
Headers show
Series Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand

Message

Liu Ying June 9, 2022, 6:49 a.m. UTC
Hi,

This is the v8 series to add some DRM bridge drivers support
for i.MX8qm/qxp SoCs.

The bridges may chain one by one to form display pipes to support
LVDS displays.  The relevant display controller is DPU embedded in
i.MX8qm/qxp SoCs.

The DPU KMS driver can be found at:
https://patchwork.kernel.org/project/dri-devel/list/?series=629908&state=%2A&archive=both

This series supports the following display pipes:
1) i.MX8qxp:
prefetch eng -> DPU -> pixel combiner -> pixel link ->
pixel link to DPI(PXL2DPI) -> LVDS display bridge(LDB)

2) i.MX8qm:
prefetch eng -> DPU -> pixel combiner -> pixel link -> LVDS display bridge(LDB)


Patch 1/14 and 2/14 add bus formats used by pixel combiner.

Patch 9/14 adds a helper for LDB bridge drivers.

Patch 3/14 ~ 8/14 and 10/14 ~ 12/14 add drm bridge drivers and
dt-bindings support for the bridges.

Patch 13/14 adds dt-binding for Control and Status Registers module(a syscon
used by PXL2DPI and LDB), which references the PXL2DPI and LDB schemas.

Patch 14/14 updates MAINTAINERS.


I've tested this series with a koe,tx26d202vm0bwa dual link LVDS panel and
a LVDS to HDMI bridge(with a downstream drm bridge driver).

Marcel Ziswiler has tested v6 with two LVDS panels(single link LT170410-2WHC
and dual link LP156WF1) on Toradex Colibri iMX8X.


Welcome comments, thanks.


v7->v8:
* Rebase upon v5.19-rc1.
* Use devm_drm_of_get_bridge() in patch 9/14 due to the rebase.
* Reorder the patch for adding dt-binding for Control and Status Registers
  module as patch 13/14, as it references PXL2DPI and LDB schemas in this
  series.

v6->v7:
* Fix complaints from 'checkpatch.pl --strict' on the LDB DRM bridge helper
  driver(patch 10/14) and some DRM bridge drivers(patch 9/14, 12/14 and 13/14).
  (Robert)
* Fix complaints from 'checkpatch --strict' on the rest DRM bridge
  drivers(patch 4/14 and 6/14).
* A trivial indentation fix for patch 9/14. (Robert)
* Add Robert's R-b tags on patch 9/14, 10/14, 12/14, 13/14 and 14/14.
* Add Marcel's T-b tags on all DRM bridge drivers.
* Add Rob's R-b tag on patch 7/14 for CSR module dt-binding.

v5->v6:
* Fix data organizations in documentation(patch 2/14) for
  MEDIA_BUS_FMT_RGB{666,888}_1X30-CPADLO. (Laurent)
* Add Laurent's R-b tags on patch 1/14 and 2/14.
* Drop 'select' schema from the CSR dt-binding documentation(patch 7/14). (Rob)
* Add Rob's R-b tag on patch 8/14.

v4->v5:
* Drop the patch 'phy: Add LVDS configuration options'. (Robert)
* Add Robert's R-b tags on patch 1/14, 2/14, 4/14 and 6/14.
* Drop the 'PC_BUF_PARA_REG' register definition from the pixel combiner bridge
  driver(patch 4/14). (Robert)
* Make a comment occupy a line in the pixel link bridge driver(patch 6/14).
  (Robert)
* Introduce a new patch(patch 7/14) to add dt-binding for Control and Status
  Registers module. (Rob)
* Make imx-ldb-helper be a pure object to be linked with i.MX8qxp LDB bridge
  driver and i.MX8qm LDB bridge driver, instead of a module.  Correspondingly,
  rename 'imx8{qm, qxp}-ldb.c' to 'imx8{qm, qxp}-ldb-drv.c'. (Robert)
* Move 'imx_ldb_helper.h' to 'drivers/gpu/drm/bridge/imx/imx-ldb-helper.h'.
  (Robert)
* s/__FSL_IMX_LDB__/__IMX_LDB_HELPER__/  for 'imx-ldb-helper.h'.

v3->v4:
* Use 'fsl,sc-resource' DT property to get the SCU resource ID associated with
  the PXL2DPI instance instead of using alias ID. (Rob)
* Add Rob's R-b tag on patch 11/14.

v2->v3:
* Drop 'fsl,syscon' DT properties from fsl,imx8qxp-ldb.yaml and
  fsl,imx8qxp-pxl2dpi.yaml. (Rob)
* Mention the CSR module controls LDB and PXL2DPI in fsl,imx8qxp-ldb.yaml and
  fsl,imx8qxp-pxl2dpi.yaml.
* Call syscon_node_to_regmap() to get regmaps from LDB bridge helper driver
  and PXL2DPI bridger driver instead of syscon_regmap_lookup_by_phandle().
* Drop two macros from pixel link bridge driver which help define functions
  and define them directly.
* Properly disable all pixel link controls to POR value by calling
  imx8qxp_pixel_link_disable_all_controls() from
  imx8qxp_pixel_link_bridge_probe().
* Add Rob's R-b tags on patch 4/14 and 6/14.

v1->v2:
* Rebase the series upon the latest drm-misc-next branch(5.11-rc2 based).
* Use graph schema in the dt-bindings of the bridges. (Laurent)
* Require all four pixel link output ports in fsl,imx8qxp-pixel-link.yaml.
  (Laurent)
* Side note i.MX8qm/qxp LDB official name 'pixel mapper' in fsl,imx8qxp-ldb.yaml.
  (Laurent)
* Mention pixel link is accessed via SCU firmware in fsl,imx8qxp-pixel-link.yaml.
  (Rob)
* Use enum instead of oneOf + const for the reg property of pixel combiner
  channels in fsl,imx8qxp-pixel-combiner.yaml. (Rob)
* Rewrite the function to find the next bridge in pixel link bridge driver
  by properly using OF APIs and dropping unnecessary DT validation. (Rob)
* Drop unnecessary port availability check in i.MX8qxp pixel link to DPI
  bridge driver.
* Drop unnecessary DT validation from i.MX8qxp LDB bridge driver.
* Use of_graph_get_endpoint_by_regs() and of_graph_get_remote_endpoint() to
  get the input remote endpoint in imx8qxp_ldb_set_di_id() of i.MX8qxp LDB
  bridge driver.
* Avoid using companion_port OF node after putting it in
  imx8qxp_ldb_parse_dt_companion() of i.MX8qxp LDB bridge driver.
* Drop unnecessary check for maximum available LDB channels from
  i.MX8qm LDB bridge driver.
* Mention i.MX8qm/qxp LDB official name 'pixel mapper' in i.MX8qm/qxp LDB
  bridge drivers and Kconfig help messages.

Liu Ying (14):
  media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
  media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
  dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding
  drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
  dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link
    binding
  drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
  dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding
  drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
  drm/bridge: imx: Add LDB driver helper support
  dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge
    binding
  drm/bridge: imx: Add LDB support for i.MX8qxp
  drm/bridge: imx: Add LDB support for i.MX8qm
  dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module
    binding
  MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs

 .../display/bridge/fsl,imx8qxp-ldb.yaml       | 173 +++++
 .../bridge/fsl,imx8qxp-pixel-combiner.yaml    | 144 ++++
 .../bridge/fsl,imx8qxp-pixel-link.yaml        | 106 +++
 .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml   | 108 +++
 .../bindings/mfd/fsl,imx8qxp-csr.yaml         | 192 +++++
 .../media/v4l/subdev-formats.rst              | 156 ++++
 MAINTAINERS                                   |  10 +
 drivers/gpu/drm/bridge/Kconfig                |   2 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/imx/Kconfig            |  42 +
 drivers/gpu/drm/bridge/imx/Makefile           |   9 +
 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c   | 220 ++++++
 drivers/gpu/drm/bridge/imx/imx-ldb-helper.h   |  96 +++
 drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c   | 587 ++++++++++++++
 drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c  | 722 ++++++++++++++++++
 .../drm/bridge/imx/imx8qxp-pixel-combiner.c   | 448 +++++++++++
 .../gpu/drm/bridge/imx/imx8qxp-pixel-link.c   | 429 +++++++++++
 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c  | 487 ++++++++++++
 include/uapi/linux/media-bus-format.h         |   6 +-
 19 files changed, 3937 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
 create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
 create mode 100644 drivers/gpu/drm/bridge/imx/Kconfig
 create mode 100644 drivers/gpu/drm/bridge/imx/Makefile
 create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.h
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c

Comments

Laurent Pinchart June 9, 2022, 9:32 a.m. UTC | #1
Hi Liu,

On Thu, Jun 09, 2022 at 02:49:17PM +0800, Liu Ying wrote:
> Hi,
> 
> This is the v8 series to add some DRM bridge drivers support
> for i.MX8qm/qxp SoCs.
> 
> The bridges may chain one by one to form display pipes to support
> LVDS displays.  The relevant display controller is DPU embedded in
> i.MX8qm/qxp SoCs.
> 
> The DPU KMS driver can be found at:
> https://patchwork.kernel.org/project/dri-devel/list/?series=629908&state=%2A&archive=both
> 
> This series supports the following display pipes:
> 1) i.MX8qxp:
> prefetch eng -> DPU -> pixel combiner -> pixel link ->
> pixel link to DPI(PXL2DPI) -> LVDS display bridge(LDB)
> 
> 2) i.MX8qm:
> prefetch eng -> DPU -> pixel combiner -> pixel link -> LVDS display bridge(LDB)
> 
> 
> Patch 1/14 and 2/14 add bus formats used by pixel combiner.
> 
> Patch 9/14 adds a helper for LDB bridge drivers.
> 
> Patch 3/14 ~ 8/14 and 10/14 ~ 12/14 add drm bridge drivers and
> dt-bindings support for the bridges.
> 
> Patch 13/14 adds dt-binding for Control and Status Registers module(a syscon
> used by PXL2DPI and LDB), which references the PXL2DPI and LDB schemas.
> 
> Patch 14/14 updates MAINTAINERS.
> 
> 
> I've tested this series with a koe,tx26d202vm0bwa dual link LVDS panel and
> a LVDS to HDMI bridge(with a downstream drm bridge driver).
> 
> Marcel Ziswiler has tested v6 with two LVDS panels(single link LT170410-2WHC
> and dual link LP156WF1) on Toradex Colibri iMX8X.
> 
> 
> Welcome comments, thanks.

I'm not sure if this comment will be welcome, but what's the reason to
handle the pixel combiner and pixel link (DPL) as bridges ? They seem
very tightly couple with the display controller, wouldn't it be better
to handle them in the display controller driver ?

> v7->v8:
> * Rebase upon v5.19-rc1.
> * Use devm_drm_of_get_bridge() in patch 9/14 due to the rebase.
> * Reorder the patch for adding dt-binding for Control and Status Registers
>   module as patch 13/14, as it references PXL2DPI and LDB schemas in this
>   series.
> 
> v6->v7:
> * Fix complaints from 'checkpatch.pl --strict' on the LDB DRM bridge helper
>   driver(patch 10/14) and some DRM bridge drivers(patch 9/14, 12/14 and 13/14).
>   (Robert)
> * Fix complaints from 'checkpatch --strict' on the rest DRM bridge
>   drivers(patch 4/14 and 6/14).
> * A trivial indentation fix for patch 9/14. (Robert)
> * Add Robert's R-b tags on patch 9/14, 10/14, 12/14, 13/14 and 14/14.
> * Add Marcel's T-b tags on all DRM bridge drivers.
> * Add Rob's R-b tag on patch 7/14 for CSR module dt-binding.
> 
> v5->v6:
> * Fix data organizations in documentation(patch 2/14) for
>   MEDIA_BUS_FMT_RGB{666,888}_1X30-CPADLO. (Laurent)
> * Add Laurent's R-b tags on patch 1/14 and 2/14.
> * Drop 'select' schema from the CSR dt-binding documentation(patch 7/14). (Rob)
> * Add Rob's R-b tag on patch 8/14.
> 
> v4->v5:
> * Drop the patch 'phy: Add LVDS configuration options'. (Robert)
> * Add Robert's R-b tags on patch 1/14, 2/14, 4/14 and 6/14.
> * Drop the 'PC_BUF_PARA_REG' register definition from the pixel combiner bridge
>   driver(patch 4/14). (Robert)
> * Make a comment occupy a line in the pixel link bridge driver(patch 6/14).
>   (Robert)
> * Introduce a new patch(patch 7/14) to add dt-binding for Control and Status
>   Registers module. (Rob)
> * Make imx-ldb-helper be a pure object to be linked with i.MX8qxp LDB bridge
>   driver and i.MX8qm LDB bridge driver, instead of a module.  Correspondingly,
>   rename 'imx8{qm, qxp}-ldb.c' to 'imx8{qm, qxp}-ldb-drv.c'. (Robert)
> * Move 'imx_ldb_helper.h' to 'drivers/gpu/drm/bridge/imx/imx-ldb-helper.h'.
>   (Robert)
> * s/__FSL_IMX_LDB__/__IMX_LDB_HELPER__/  for 'imx-ldb-helper.h'.
> 
> v3->v4:
> * Use 'fsl,sc-resource' DT property to get the SCU resource ID associated with
>   the PXL2DPI instance instead of using alias ID. (Rob)
> * Add Rob's R-b tag on patch 11/14.
> 
> v2->v3:
> * Drop 'fsl,syscon' DT properties from fsl,imx8qxp-ldb.yaml and
>   fsl,imx8qxp-pxl2dpi.yaml. (Rob)
> * Mention the CSR module controls LDB and PXL2DPI in fsl,imx8qxp-ldb.yaml and
>   fsl,imx8qxp-pxl2dpi.yaml.
> * Call syscon_node_to_regmap() to get regmaps from LDB bridge helper driver
>   and PXL2DPI bridger driver instead of syscon_regmap_lookup_by_phandle().
> * Drop two macros from pixel link bridge driver which help define functions
>   and define them directly.
> * Properly disable all pixel link controls to POR value by calling
>   imx8qxp_pixel_link_disable_all_controls() from
>   imx8qxp_pixel_link_bridge_probe().
> * Add Rob's R-b tags on patch 4/14 and 6/14.
> 
> v1->v2:
> * Rebase the series upon the latest drm-misc-next branch(5.11-rc2 based).
> * Use graph schema in the dt-bindings of the bridges. (Laurent)
> * Require all four pixel link output ports in fsl,imx8qxp-pixel-link.yaml.
>   (Laurent)
> * Side note i.MX8qm/qxp LDB official name 'pixel mapper' in fsl,imx8qxp-ldb.yaml.
>   (Laurent)
> * Mention pixel link is accessed via SCU firmware in fsl,imx8qxp-pixel-link.yaml.
>   (Rob)
> * Use enum instead of oneOf + const for the reg property of pixel combiner
>   channels in fsl,imx8qxp-pixel-combiner.yaml. (Rob)
> * Rewrite the function to find the next bridge in pixel link bridge driver
>   by properly using OF APIs and dropping unnecessary DT validation. (Rob)
> * Drop unnecessary port availability check in i.MX8qxp pixel link to DPI
>   bridge driver.
> * Drop unnecessary DT validation from i.MX8qxp LDB bridge driver.
> * Use of_graph_get_endpoint_by_regs() and of_graph_get_remote_endpoint() to
>   get the input remote endpoint in imx8qxp_ldb_set_di_id() of i.MX8qxp LDB
>   bridge driver.
> * Avoid using companion_port OF node after putting it in
>   imx8qxp_ldb_parse_dt_companion() of i.MX8qxp LDB bridge driver.
> * Drop unnecessary check for maximum available LDB channels from
>   i.MX8qm LDB bridge driver.
> * Mention i.MX8qm/qxp LDB official name 'pixel mapper' in i.MX8qm/qxp LDB
>   bridge drivers and Kconfig help messages.
> 
> Liu Ying (14):
>   media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
>   media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
>   dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding
>   drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
>   dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link
>     binding
>   drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
>   dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding
>   drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
>   drm/bridge: imx: Add LDB driver helper support
>   dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge
>     binding
>   drm/bridge: imx: Add LDB support for i.MX8qxp
>   drm/bridge: imx: Add LDB support for i.MX8qm
>   dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module
>     binding
>   MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs
> 
>  .../display/bridge/fsl,imx8qxp-ldb.yaml       | 173 +++++
>  .../bridge/fsl,imx8qxp-pixel-combiner.yaml    | 144 ++++
>  .../bridge/fsl,imx8qxp-pixel-link.yaml        | 106 +++
>  .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml   | 108 +++
>  .../bindings/mfd/fsl,imx8qxp-csr.yaml         | 192 +++++
>  .../media/v4l/subdev-formats.rst              | 156 ++++
>  MAINTAINERS                                   |  10 +
>  drivers/gpu/drm/bridge/Kconfig                |   2 +
>  drivers/gpu/drm/bridge/Makefile               |   1 +
>  drivers/gpu/drm/bridge/imx/Kconfig            |  42 +
>  drivers/gpu/drm/bridge/imx/Makefile           |   9 +
>  drivers/gpu/drm/bridge/imx/imx-ldb-helper.c   | 220 ++++++
>  drivers/gpu/drm/bridge/imx/imx-ldb-helper.h   |  96 +++
>  drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c   | 587 ++++++++++++++
>  drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c  | 722 ++++++++++++++++++
>  .../drm/bridge/imx/imx8qxp-pixel-combiner.c   | 448 +++++++++++
>  .../gpu/drm/bridge/imx/imx8qxp-pixel-link.c   | 429 +++++++++++
>  drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c  | 487 ++++++++++++
>  include/uapi/linux/media-bus-format.h         |   6 +-
>  19 files changed, 3937 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
>  create mode 100644 drivers/gpu/drm/bridge/imx/Kconfig
>  create mode 100644 drivers/gpu/drm/bridge/imx/Makefile
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.h
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c
>  create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c
Liu Ying June 10, 2022, 2:27 a.m. UTC | #2
Hi Laurent,

On Thu, 2022-06-09 at 12:32 +0300, Laurent Pinchart wrote:
> Hi Liu,
> 
> On Thu, Jun 09, 2022 at 02:49:17PM +0800, Liu Ying wrote:
> > Hi,
> > 
> > This is the v8 series to add some DRM bridge drivers support
> > for i.MX8qm/qxp SoCs.
> > 
> > The bridges may chain one by one to form display pipes to support
> > LVDS displays.  The relevant display controller is DPU embedded in
> > i.MX8qm/qxp SoCs.
> > 
> > The DPU KMS driver can be found at:
> > 
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fproject%2Fdri-devel%2Flist%2F%3Fseries%3D629908%26state%3D%252A%26archive%3Dboth&data=05%7C01%7Cvictor.liu%40nxp.com%7C52bc453b59654345591f08da49faf477%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637903639438033239%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=ciw5SX%2FdUHu5z6tVpY383LBxkWmEoFu03ljhrkKsj%2FQ%3D&reserved=0
> > 
> > This series supports the following display pipes:
> > 1) i.MX8qxp:
> > prefetch eng -> DPU -> pixel combiner -> pixel link ->
> > pixel link to DPI(PXL2DPI) -> LVDS display bridge(LDB)
> > 
> > 2) i.MX8qm:
> > prefetch eng -> DPU -> pixel combiner -> pixel link -> LVDS display
> > bridge(LDB)
> > 
> > 
> > Patch 1/14 and 2/14 add bus formats used by pixel combiner.
> > 
> > Patch 9/14 adds a helper for LDB bridge drivers.
> > 
> > Patch 3/14 ~ 8/14 and 10/14 ~ 12/14 add drm bridge drivers and
> > dt-bindings support for the bridges.
> > 
> > Patch 13/14 adds dt-binding for Control and Status Registers
> > module(a syscon
> > used by PXL2DPI and LDB), which references the PXL2DPI and LDB
> > schemas.
> > 
> > Patch 14/14 updates MAINTAINERS.
> > 
> > 
> > I've tested this series with a koe,tx26d202vm0bwa dual link LVDS
> > panel and
> > a LVDS to HDMI bridge(with a downstream drm bridge driver).
> > 
> > Marcel Ziswiler has tested v6 with two LVDS panels(single link
> > LT170410-2WHC
> > and dual link LP156WF1) on Toradex Colibri iMX8X.
> > 
> > 
> > Welcome comments, thanks.
> 
> I'm not sure if this comment will be welcome, but what's the reason
> to
> handle the pixel combiner and pixel link (DPL) as bridges ? They seem
> very tightly couple with the display controller, wouldn't it be
> better
> to handle them in the display controller driver ?

i.MX8qxp display controller, pixel combiner and pixel link are
standalone IPs. i.MX8qxp reference manual has separate chapters for
them.  Not sure if pixel combiner and/or pixel link will be used to
work with other display controllers in future SoCs. So, it looks
appropriate to take them as separate bridges. 

Regards,
Liu Ying