mbox series

[0/9] arm64: dts: qcom: sm8150-hdk: enable display output

Message ID 20231209232132.3580045-1-dmitry.baryshkov@linaro.org (mailing list archive)
Headers show
Series arm64: dts: qcom: sm8150-hdk: enable display output | expand

Message

Dmitry Baryshkov Dec. 9, 2023, 11:21 p.m. UTC 
Enable display output on the SM8150 HDK device. This includes HDMI
output through the onboard DSI-HDMI bridge and DP output on the USB-C
port.

Dmitry Baryshkov (9):
  dt-bindings: display: msm: dp: declare compatible string for sm8150
  arm64: dts: qcom: sm8150: use SoC-specific compat for RPMh stats
  arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
  arm64: dts: qcom: sm8150-hdk: enable HDMI output
  arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
  arm64: dts: qcom: sm8150: add DisplayPort controller
  arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
  arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
  arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode

 .../bindings/display/msm/dp-controller.yaml   |   1 +
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts       | 264 +++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 132 ++++++++-
 3 files changed, 386 insertions(+), 11 deletions(-)

Comments

Dmitry Baryshkov Dec. 13, 2023, 12:37 a.m. UTC | #1 
On Sun, 10 Dec 2023 02:21:23 +0300, Dmitry Baryshkov wrote:
> Enable display output on the SM8150 HDK device. This includes HDMI
> output through the onboard DSI-HDMI bridge and DP output on the USB-C
> port.
> 
> Dmitry Baryshkov (9):
>   dt-bindings: display: msm: dp: declare compatible string for sm8150
>   arm64: dts: qcom: sm8150: use SoC-specific compat for RPMh stats
>   arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
>   arm64: dts: qcom: sm8150-hdk: enable HDMI output
>   arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
>   arm64: dts: qcom: sm8150: add DisplayPort controller
>   arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
>   arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
>   arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
> 
> [...]

Applied, thanks!

[1/9] dt-bindings: display: msm: dp: declare compatible string for sm8150
      https://gitlab.freedesktop.org/lumag/msm/-/commit/0d196633771c

Best regards,