mbox series

[v2,0/3] Correct WL-355608-A8 panel compatible

Message ID 20240703103710.31169-1-ryan@testtoast.com (mailing list archive)
Headers show
Series Correct WL-355608-A8 panel compatible | expand

Message

Ryan Walklin July 3, 2024, 10:31 a.m. UTC
Hi All,

V2 of this patch for this LCD panel used in Anbernic handheld devices, with updated compatible string as agreed, in the format <device vendor>,<component serial>.

Original blurb below:

The previous patch adding support for this panel [1] referred to previously by its serial number only. As discussed after the patch was committed, the preference is to use the integrating device vendor and name in this circumstance.

This series corrects the panel compatible to reflect the vendor (Anbernic, already in the vendor prefix table), updates the NV3052C panel driver with the new compatible, and lastly adds num-chipselects and sck-gpios to the DT binding example, identified by make dt_bindings_check as required for bit-banged SPI over GPIO lines.

Ryan Walklin (3):
  dt-bindings: display: panel: Rename WL-355608-A8 panel
  drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
  dt-bindings: display: panel: correct Anbernic RG35XX panel example

 .../{wl-355608-a8.yaml => anbernic,wl-355608-a8.yaml} | 11 +++++++----
 drivers/gpu/drm/panel/panel-newvision-nv3052c.c       |  2 +-
 2 files changed, 8 insertions(+), 5 deletions(-)
 rename Documentation/devicetree/bindings/display/panel/{wl-355608-a8.yaml => anbernic,wl-355608-a8.yaml} (76%)