@@ -64,7 +64,8 @@
#define LEVEL_DMT 0
#define LEVEL_GTF 1
-#define LEVEL_CVT 2
+#define LEVEL_GTF2 2
+#define LEVEL_CVT 3
static struct edid_quirk {
char *vendor;
@@ -716,6 +717,71 @@ drm_monitor_supports_rb(struct edid *edid)
return ((edid->input & DRM_EDID_INPUT_DIGITAL) != 0);
}
+static void
+find_gtf2(struct detailed_timing *t, void *data)
+{
+ u8 *r = (u8 *)t;
+ if (r[3] == EDID_DETAIL_MONITOR_RANGE && r[10] == 0x02)
+ *(u8 **)data = r;
+}
+
+/* Secondary GTF curve kicks in above some break frequency */
+static int
+drm_gtf2_hbreak(struct edid *edid)
+{
+ u8 *r = NULL;
+ drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+ return r ? (r[12] * 2) : 0;
+}
+
+static int
+drm_gtf2_2c(struct edid *edid)
+{
+ u8 *r = NULL;
+ drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+ return r ? r[13] : 0;
+}
+
+static int
+drm_gtf2_m(struct edid *edid)
+{
+ u8 *r = NULL;
+ drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+ return r ? (r[15] << 8) + r[14] : 0;
+}
+
+static int
+drm_gtf2_k(struct edid *edid)
+{
+ u8 *r = NULL;
+ drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+ return r ? r[16] : 0;
+}
+
+static int
+drm_gtf2_2j(struct edid *edid)
+{
+ u8 *r = NULL;
+ drm_for_each_detailed_block((u8 *)edid, find_gtf2, &r);
+ return r ? r[17] : 0;
+}
+
+/**
+ * standard_timing_level - get std. timing level(CVT/GTF/DMT)
+ * @edid: EDID block to scan
+ */
+static int standard_timing_level(struct edid *edid)
+{
+ if (edid->revision >= 2) {
+ if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
+ return LEVEL_CVT;
+ if (drm_gtf2_hbreak(edid))
+ return LEVEL_GTF2;
+ return LEVEL_GTF;
+ }
+ return LEVEL_DMT;
+}
+
/*
* 0 is reserved. The spec says 0x01 fill for unused timings. Some old
* monitors fill with ascii space (0x20) instead.
@@ -737,8 +803,8 @@ bad_std_timing(u8 a, u8 b)
* and convert them into a real mode using CVT/GTF/DMT.
*/
static struct drm_display_mode *
-drm_mode_std(struct drm_connector *connector, struct std_timing *t,
- int revision, int timing_level)
+drm_mode_std(struct drm_connector *connector, struct edid *edid,
+ struct std_timing *t, int revision)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *m, *mode = NULL;
@@ -748,6 +814,7 @@ drm_mode_std(struct drm_connector *connector, struct std_timing *t,
>> EDID_TIMING_ASPECT_SHIFT;
unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
>> EDID_TIMING_VFREQ_SHIFT;
+ int timing_level = standard_timing_level(edid);
if (bad_std_timing(t->hsize, t->vfreq_aspect))
return NULL;
@@ -809,6 +876,23 @@ drm_mode_std(struct drm_connector *connector, struct std_timing *t,
case LEVEL_GTF:
mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
break;
+ case LEVEL_GTF2:
+ /*
+ * This is potentially wrong if there's ever a monitor with
+ * more than one ranges section, each claiming a different
+ * secondary GTF curve. Please don't do that.
+ */
+ mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+ if (drm_mode_hsync(mode) > drm_gtf2_hbreak(edid)) {
+ kfree(mode);
+ mode = drm_gtf_mode_complex(dev, hsize, vsize,
+ vrefresh_rate, 0, 0,
+ drm_gtf2_m(edid),
+ drm_gtf2_2c(edid),
+ drm_gtf2_k(edid),
+ drm_gtf2_2j(edid));
+ }
+ break;
case LEVEL_CVT:
mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
false);
@@ -1054,19 +1138,6 @@ static int add_established_modes(struct drm_connector *connector, struct edid *e
return modes;
}
-/**
- * stanard_timing_level - get std. timing level(CVT/GTF/DMT)
- * @edid: EDID block to scan
- */
-static int standard_timing_level(struct edid *edid)
-{
- if (edid->revision >= 2) {
- if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
- return LEVEL_CVT;
- return LEVEL_GTF;
- }
- return LEVEL_DMT;
-}
/**
* add_standard_modes - get std. modes from EDID and add them
@@ -1078,15 +1149,13 @@ static int standard_timing_level(struct edid *edid)
static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
{
int i, modes = 0;
- int timing_level;
-
- timing_level = standard_timing_level(edid);
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct drm_display_mode *newmode;
- newmode = drm_mode_std(connector, &edid->standard_timings[i],
- edid->revision, timing_level);
+ newmode = drm_mode_std(connector, edid,
+ &edid->standard_timings[i],
+ edid->revision);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
@@ -1152,9 +1221,6 @@ range_pixel_clock(struct edid *edid, u8 *t)
return t[9] * 10000 + 5001;
}
-/*
- * XXX fix this for GTF secondary curve formula
- */
static bool
mode_in_range(struct drm_display_mode *mode, struct edid *edid,
struct detailed_timing *timing)
@@ -1351,7 +1417,6 @@ static int add_detailed_modes(struct drm_connector *connector,
{
int i, modes = 0;
struct detailed_non_pixel *data = &timing->data.other_data;
- int timing_level = standard_timing_level(edid);
int gtf = (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF);
struct drm_display_mode *newmode;
struct drm_device *dev = connector->dev;
@@ -1382,8 +1447,8 @@ static int add_detailed_modes(struct drm_connector *connector,
struct drm_display_mode *newmode;
std = &data->data.timings[i];
- newmode = drm_mode_std(connector, std, edid->revision,
- timing_level);
+ newmode = drm_mode_std(connector, edid, std,
+ edid->revision);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
@@ -276,35 +276,29 @@ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
EXPORT_SYMBOL(drm_cvt_mode);
/**
- * drm_gtf_mode - create the modeline based on GTF algorithm
+ * drm_gtf_mode_complex - create the modeline based on full GTF algorithm
*
* @dev :drm device
* @hdisplay :hdisplay size
* @vdisplay :vdisplay size
* @vrefresh :vrefresh rate.
* @interlaced :whether the interlace is supported
- * @margins :whether the margin is supported
+ * @margins :desired margin size
+ * @GTF_[MCKJ] :extended GTF formula parameters
*
* LOCKING.
* none.
*
- * return the modeline based on GTF algorithm
- *
- * This function is to create the modeline based on the GTF algorithm.
- * Generalized Timing Formula is derived from:
- * GTF Spreadsheet by Andy Morrish (1/5/97)
- * available at http://www.vesa.org
+ * return the modeline based on full GTF algorithm.
*
- * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
- * What I have done is to translate it by using integer calculation.
- * I also refer to the function of fb_get_mode in the file of
- * drivers/video/fbmon.c
+ * GTF feature blocks specify C and J in multiples of 0.5, so we pass them
+ * in here multiplied by two. For a C of 40, pass in 80.
*/
-struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
- int vdisplay, int vrefresh,
- bool interlaced, int margins)
-{
- /* 1) top/bottom margin size (% of height) - default: 1.8, */
+struct drm_display_mode *
+drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay,
+ int vrefresh, bool interlaced, int margins,
+ int GTF_M, int GTF_2C, int GTF_K, int GTF_2J)
+{ /* 1) top/bottom margin size (% of height) - default: 1.8, */
#define GTF_MARGIN_PERCENTAGE 18
/* 2) character cell horizontal granularity (pixels) - default 8 */
#define GTF_CELL_GRAN 8
@@ -316,17 +310,9 @@ struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
#define H_SYNC_PERCENT 8
/* min time of vsync + back porch (microsec) */
#define MIN_VSYNC_PLUS_BP 550
- /* blanking formula gradient */
-#define GTF_M 600
- /* blanking formula offset */
-#define GTF_C 40
- /* blanking formula scaling factor */
-#define GTF_K 128
- /* blanking formula scaling factor */
-#define GTF_J 20
/* C' and M' are part of the Blanking Duty Cycle computation */
-#define GTF_C_PRIME (((GTF_C - GTF_J) * GTF_K / 256) + GTF_J)
-#define GTF_M_PRIME (GTF_K * GTF_M / 256)
+#define GTF_C_PRIME ((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2)
+#define GTF_M_PRIME (GTF_K * GTF_M / 256)
struct drm_display_mode *drm_mode;
unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd;
int top_margin, bottom_margin;
@@ -470,7 +456,48 @@ struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, int hdisplay,
return drm_mode;
}
+EXPORT_SYMBOL(drm_gtf_mode_complex);
+
+/**
+ * drm_gtf_mode - create the modeline based on GTF algorithm
+ *
+ * @dev :drm device
+ * @hdisplay :hdisplay size
+ * @vdisplay :vdisplay size
+ * @vrefresh :vrefresh rate.
+ * @interlaced :whether the interlace is supported
+ * @margins :whether the margin is supported
+ *
+ * LOCKING.
+ * none.
+ *
+ * return the modeline based on GTF algorithm
+ *
+ * This function is to create the modeline based on the GTF algorithm.
+ * Generalized Timing Formula is derived from:
+ * GTF Spreadsheet by Andy Morrish (1/5/97)
+ * available at http://www.vesa.org
+ *
+ * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c.
+ * What I have done is to translate it by using integer calculation.
+ * I also refer to the function of fb_get_mode in the file of
+ * drivers/video/fbmon.c
+ *
+ * Standard GTF parameters:
+ * M = 600
+ * C = 40
+ * K = 128
+ * J = 20
+ */
+struct drm_display_mode *
+drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
+ bool lace, int margins)
+{
+ return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, lace,
+ margins, 600, 40 * 2, 128, 20 * 2);
+}
EXPORT_SYMBOL(drm_gtf_mode);
+
/**
* drm_mode_set_name - set the name on a mode
* @mode: name will be set in this mode
@@ -797,6 +797,10 @@ extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool interlaced, int margins);
+extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
+ int hdisplay, int vdisplay, int vrefresh,
+ bool interlaced, int margins, int GTF_M,
+ int GTF_2C, int GTF_K, int GTF_2J);
extern int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay);