@@ -37,6 +37,20 @@
#define MAX_FB_BUFFER 4
#define DEFAULT_ZPOS -1
+#define _wait_for(COND, MS) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ } \
+ ret__; \
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS)
+
struct drm_device;
struct exynos_drm_overlay;
struct drm_connector;
@@ -61,6 +75,8 @@ enum exynos_drm_output_type {
* @commit: apply hardware specific overlay data to registers.
* @enable: enable hardware specific overlay.
* @disable: disable hardware specific overlay.
+ * @wait_for_vblank: wait for vblank interrupt to make sure that
+ * hardware overlay is disabled.
*/
struct exynos_drm_overlay_ops {
void (*mode_set)(struct device *subdrv_dev,
@@ -68,6 +84,7 @@ struct exynos_drm_overlay_ops {
void (*commit)(struct device *subdrv_dev, int zpos);
void (*enable)(struct device *subdrv_dev, int zpos);
void (*disable)(struct device *subdrv_dev, int zpos);
+ void (*wait_for_vblank)(struct device *subdrv_dev);
};
/*
@@ -430,4 +430,14 @@ void exynos_drm_encoder_plane_disable(struct drm_encoder *encoder, void *data)
if (overlay_ops && overlay_ops->disable)
overlay_ops->disable(manager->dev, zpos);
+
+ /*
+ * wait for vblank interrupt
+ * - this makes sure that hardware overlay is disabled to avoid
+ * for the dma accesses to memory after gem buffer was released
+ * because the setting for disabling the overlay will be updated
+ * at vsync.
+ */
+ if (overlay_ops->wait_for_vblank)
+ overlay_ops->wait_for_vblank(manager->dev);
}