@@ -38,6 +38,14 @@
#include "drm_edid.h"
#include "drm_fourcc.h"
+static int drm_mode_set_obj_prop(struct drm_mode_object *obj,
+ void *state, struct drm_property *property, uint64_t value);
+
+static inline bool dev_supports_atomic(struct drm_device *dev)
+{
+ return !!dev->driver->atomic_begin;
+}
+
/* Avoid boilerplate. I'm tired of typing. */
#define DRM_ENUM_NAME_FN(fnname, list) \
char *fnname(int val) \
@@ -376,8 +384,10 @@ EXPORT_SYMBOL(drm_framebuffer_cleanup);
*
* Scans all the CRTCs and planes in @dev's mode_config. If they're
* using @fb, removes it, setting it to NULL.
+ *
+ * Legacy version.. remove when all drivers converted to 'atomic' API
*/
-void drm_framebuffer_remove(struct drm_framebuffer *fb)
+static void drm_framebuffer_remove_legacy(struct drm_framebuffer *fb)
{
struct drm_device *dev = fb->dev;
struct drm_crtc *crtc;
@@ -414,6 +424,71 @@ void drm_framebuffer_remove(struct drm_framebuffer *fb)
drm_framebuffer_unreference(fb);
}
+
+/**
+ * drm_framebuffer_remove - remove and unreference a framebuffer object
+ * @fb: framebuffer to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Scans all the CRTCs and planes in @dev's mode_config. If they're
+ * using @fb, removes it, setting it to NULL.
+ */
+void drm_framebuffer_remove(struct drm_framebuffer *fb)
+{
+ struct drm_device *dev = fb->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_crtc *crtc;
+ struct drm_plane *plane;
+ struct drm_mode_set set;
+ void *state;
+ int ret;
+
+ if (!dev_supports_atomic(dev)) {
+ drm_framebuffer_remove_legacy(fb);
+ return;
+ }
+
+ state = dev->driver->atomic_begin(dev, NULL);
+ if (IS_ERR(state)) {
+ DRM_ERROR("failed to disable crtc and/or plane when fb was deleted\n");
+ return;
+ }
+
+ /* remove from any CRTC */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ if (crtc->fb == fb) {
+ /* should turn off the crtc */
+ memset(&set, 0, sizeof(struct drm_mode_set));
+ set.crtc = crtc;
+ set.fb = NULL;
+ ret = crtc->funcs->set_config(&set);
+ if (ret)
+ DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
+ }
+ }
+
+ list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
+ if (plane->fb == fb) {
+ /* should turn off the crtc */
+ drm_mode_plane_set_obj_prop(plane, state, config->prop_crtc_id, 0);
+ drm_mode_plane_set_obj_prop(plane, state, config->prop_fb_id, 0);
+ }
+ }
+
+ /* just disabling stuff shouldn't fail, hopefully: */
+ if(dev->driver->atomic_check(dev, state))
+ DRM_ERROR("failed to disable crtc and/or plane when fb was deleted\n");
+ else
+ dev->driver->atomic_commit(dev, state, NULL);
+
+ dev->driver->atomic_end(dev, state);
+
+ list_del(&fb->filp_head);
+
+ drm_framebuffer_unreference(fb);
+}
EXPORT_SYMBOL(drm_framebuffer_remove);
/**
@@ -663,6 +738,7 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
const uint32_t *formats, uint32_t format_count,
bool priv)
{
+ struct drm_mode_config *config = &dev->mode_config;
int ret;
mutex_lock(&dev->mode_config.mutex);
@@ -699,6 +775,20 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
INIT_LIST_HEAD(&plane->head);
}
+ if (!dev_supports_atomic(dev))
+ goto out;
+
+ drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_h, 0);
+
out:
mutex_unlock(&dev->mode_config.mutex);
@@ -772,23 +862,91 @@ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode)
}
EXPORT_SYMBOL(drm_mode_destroy);
-static int drm_mode_create_standard_connector_properties(struct drm_device *dev)
+static int drm_mode_create_standard_properties(struct drm_device *dev)
{
- struct drm_property *edid;
- struct drm_property *dpms;
+ struct drm_property *prop;
/*
* Standard properties (apply to all connectors)
*/
- edid = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+ prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_IMMUTABLE,
"EDID", 0);
- dev->mode_config.edid_property = edid;
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.edid_property = prop;
- dpms = drm_property_create_enum(dev, 0,
+ prop = drm_property_create_enum(dev, 0,
"DPMS", drm_dpms_enum_list,
ARRAY_SIZE(drm_dpms_enum_list));
- dev->mode_config.dpms_property = dpms;
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.dpms_property = prop;
+
+
+ /* TODO we need the driver to control which of these are dynamic
+ * and which are not.. or maybe we should just set all to zero
+ * and let the individual drivers frob the prop->flags for the
+ * properties they can support dynamic changes on..
+ */
+
+ prop = drm_property_create_range(dev, DRM_MODE_PROP_DYNAMIC,
+ "src_x", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_x = prop;
+
+ prop = drm_property_create_range(dev, DRM_MODE_PROP_DYNAMIC,
+ "src_y", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_y = prop;
+
+ prop = drm_property_create_range(dev, 0, "src_w", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_w = prop;
+
+ prop = drm_property_create_range(dev, 0, "src_h", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_src_h = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_DYNAMIC | DRM_MODE_PROP_SIGNED,
+ "crtc_x", I642U64(INT_MIN), I642U64(INT_MAX));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_x = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_DYNAMIC | DRM_MODE_PROP_SIGNED,
+ "crtc_y", I642U64(INT_MIN), I642U64(INT_MAX));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_y = prop;
+
+ prop = drm_property_create_range(dev, 0, "crtc_w", 0, INT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_w = prop;
+
+ prop = drm_property_create_range(dev, 0, "crtc_h", 0, INT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_h = prop;
+
+ prop = drm_property_create_object(dev, DRM_MODE_PROP_DYNAMIC,
+ "fb", DRM_MODE_OBJECT_FB);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_fb_id = prop;
+
+ prop = drm_property_create_object(dev, 0,
+ "crtc", DRM_MODE_OBJECT_CRTC);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.prop_crtc_id = prop;
return 0;
}
@@ -1003,7 +1161,7 @@ void drm_mode_config_init(struct drm_device *dev)
idr_init(&dev->mode_config.crtc_idr);
mutex_lock(&dev->mode_config.mutex);
- drm_mode_create_standard_connector_properties(dev);
+ drm_mode_create_standard_properties(dev);
mutex_unlock(&dev->mode_config.mutex);
/* Just to be sure */
@@ -1745,8 +1903,10 @@ out:
*
* Set plane info, including placement, fb, scaling, and other factors.
* Or pass a NULL fb to disable.
+ *
+ * Legacy version.. remove when all drivers converted to 'atomic' API
*/
-int drm_mode_setplane(struct drm_device *dev, void *data,
+static int drm_mode_setplane_legacy(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_set_plane *plane_req = data;
@@ -1866,6 +2026,95 @@ out:
}
/**
+ * drm_mode_setplane - set up or tear down an plane
+ * @dev: DRM device
+ * @data: ioctl data*
+ * @file_prive: DRM file info
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Set plane info, including placement, fb, scaling, and other factors.
+ * Or pass a NULL fb to disable.
+ */
+int drm_mode_setplane(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_set_plane *plane_req = data;
+ struct drm_mode_config *config = &dev->mode_config;
+ struct drm_mode_object *obj;
+ void *state;
+ int ret = 0;
+
+ if (!dev_supports_atomic(dev))
+ return drm_mode_setplane_legacy(dev, data, file_priv);
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ obj = drm_mode_object_find(dev, plane_req->crtc_id,
+ DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_DEBUG_KMS("Unknown CRTC ID %d\n",
+ plane_req->crtc_id);
+ ret = -ENOENT;
+ goto out_unlock;
+ }
+
+ state = dev->driver->atomic_begin(dev, obj_to_crtc(obj));
+ if (IS_ERR(state)) {
+ ret = PTR_ERR(state);
+ goto out_unlock;
+ }
+
+ obj = drm_mode_object_find(dev, plane_req->plane_id,
+ DRM_MODE_OBJECT_PLANE);
+ if (!obj) {
+ DRM_DEBUG_KMS("Unknown plane ID %d\n",
+ plane_req->plane_id);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ ret =
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_id, plane_req->crtc_id) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_fb_id, plane_req->fb_id) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_x, I642U64(plane_req->crtc_x)) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_y, I642U64(plane_req->crtc_y)) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_w, plane_req->crtc_w) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_crtc_h, plane_req->crtc_h) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_w, plane_req->src_w) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_h, plane_req->src_h) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_x, plane_req->src_x) ||
+ drm_mode_set_obj_prop(obj, state,
+ config->prop_src_y, plane_req->src_y) ||
+ dev->driver->atomic_check(dev, state);
+
+ if (ret)
+ goto out;
+
+ ret = dev->driver->atomic_commit(dev, state, NULL);
+
+out:
+ dev->driver->atomic_end(dev, state);
+out_unlock:
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return ret;
+}
+
+/**
* drm_mode_setcrtc - set CRTC configuration
* @inode: inode from the ioctl
* @filp: file * from the ioctl
@@ -3245,7 +3494,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
}
-static int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
+int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3266,8 +3515,9 @@ static int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
return ret;
}
+EXPORT_SYMBOL(drm_mode_connector_set_obj_prop);
-static int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
+int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3281,8 +3531,9 @@ static int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
return ret;
}
+EXPORT_SYMBOL(drm_mode_crtc_set_obj_prop);
-static int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
void *state, struct drm_property *property,
uint64_t value)
{
@@ -3296,6 +3547,7 @@ static int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
return ret;
}
+EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
static int drm_mode_set_obj_prop(struct drm_mode_object *obj,
void *state, struct drm_property *property, uint64_t value)
@@ -810,8 +810,20 @@ struct drm_mode_config {
bool poll_enabled;
struct delayed_work output_poll_work;
- /* pointers to standard properties */
+ /* just so blob properties can always be in a list: */
struct list_head property_blob_list;
+
+ /* pointers to standard properties */
+ struct drm_property *prop_src_x;
+ struct drm_property *prop_src_y;
+ struct drm_property *prop_src_w;
+ struct drm_property *prop_src_h;
+ struct drm_property *prop_crtc_x;
+ struct drm_property *prop_crtc_y;
+ struct drm_property *prop_crtc_w;
+ struct drm_property *prop_crtc_h;
+ struct drm_property *prop_fb_id;
+ struct drm_property *prop_crtc_id;
struct drm_property *edid_property;
struct drm_property *dpms_property;
@@ -941,6 +953,17 @@ extern int drm_object_property_set_value(struct drm_mode_object *obj,
extern int drm_object_property_get_value(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t *value);
+
+int drm_mode_connector_set_obj_prop(struct drm_connector *connector,
+ void *state, struct drm_property *property,
+ uint64_t value);
+int drm_mode_crtc_set_obj_prop(struct drm_crtc *crtc,
+ void *state, struct drm_property *property,
+ uint64_t value);
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+ void *state, struct drm_property *property,
+ uint64_t value);
+
extern int drm_framebuffer_init(struct drm_device *dev,
struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs);
From: Rob Clark <rob@ti.com> Use atomic properties mechanism to set plane attributes. This by itself doesn't accomplish anything, but it avoids having multiple code paths to do the same thing when nuclear-pageflip and atomic- modeset are introduced. --- drivers/gpu/drm/drm_crtc.c | 278 +++++++++++++++++++++++++++++++++++++++++--- include/drm/drm_crtc.h | 25 +++- 2 files changed, 289 insertions(+), 14 deletions(-)