@@ -1467,10 +1467,10 @@ void viafb_set_vclock(u32 clk, int set_iga)
via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
}
-struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+struct via_display_timing var_to_timing(const struct fb_var_screeninfo *var,
u16 cxres, u16 cyres)
{
- struct display_timing timing;
+ struct via_display_timing timing;
u16 dx = (var->xres - cxres) / 2, dy = (var->yres - cyres) / 2;
timing.hor_addr = cxres;
@@ -1491,7 +1491,7 @@ struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
u16 cxres, u16 cyres, int iga)
{
- struct display_timing crt_reg = var_to_timing(var,
+ struct via_display_timing crt_reg = var_to_timing(var,
cxres ? cxres : var->xres, cyres ? cyres : var->yres);
if (iga == IGA1)
@@ -637,7 +637,7 @@ extern int viafb_LCD_ON;
extern int viafb_DVI_ON;
extern int viafb_hotplug;
-struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+struct via_display_timing var_to_timing(const struct fb_var_screeninfo *var,
u16 cxres, u16 cyres);
void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
u16 cxres, u16 cyres, int iga);
@@ -549,7 +549,7 @@ void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
int panel_hres = plvds_setting_info->lcd_panel_hres;
int panel_vres = plvds_setting_info->lcd_panel_vres;
u32 clock;
- struct display_timing timing;
+ struct via_display_timing timing;
struct fb_var_screeninfo panel_var;
const struct fb_videomode *mode_crt_table, *panel_crt_table;
@@ -319,7 +319,7 @@ struct crt_mode_table {
int refresh_rate;
int h_sync_polarity;
int v_sync_polarity;
- struct display_timing crtc;
+ struct via_display_timing crtc;
};
struct io_reg {
@@ -30,9 +30,9 @@
#include "debug.h"
-void via_set_primary_timing(const struct display_timing *timing)
+void via_set_primary_timing(const struct via_display_timing *timing)
{
- struct display_timing raw;
+ struct via_display_timing raw;
raw.hor_total = timing->hor_total / 8 - 5;
raw.hor_addr = timing->hor_addr / 8 - 1;
@@ -88,9 +88,9 @@ void via_set_primary_timing(const struct display_timing *timing)
via_write_reg_mask(VIACR, 0x17, 0x80, 0x80);
}
-void via_set_secondary_timing(const struct display_timing *timing)
+void via_set_secondary_timing(const struct via_display_timing *timing)
{
- struct display_timing raw;
+ struct via_display_timing raw;
raw.hor_total = timing->hor_total - 1;
raw.hor_addr = timing->hor_addr - 1;
@@ -33,7 +33,7 @@
#define VIA_PITCH_MAX 0x3FF8
-struct display_timing {
+struct via_display_timing {
u16 hor_total;
u16 hor_addr;
u16 hor_blank_start;
@@ -49,8 +49,8 @@ struct display_timing {
};
-void via_set_primary_timing(const struct display_timing *timing);
-void via_set_secondary_timing(const struct display_timing *timing);
+void via_set_primary_timing(const struct via_display_timing *timing);
+void via_set_secondary_timing(const struct via_display_timing *timing);
void via_set_primary_address(u32 addr);
void via_set_secondary_address(u32 addr);
void via_set_primary_pitch(u32 pitch);
The struct display_timing is specific to the via subsystem. The naming leads to collisions with the new struct display_timing, which is supposed to be a shared struct between different subsystems. To clean this up, prepend the existing struct with the subsystem it is specific to. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> --- drivers/video/via/hw.c | 6 +++--- drivers/video/via/hw.h | 2 +- drivers/video/via/lcd.c | 2 +- drivers/video/via/share.h | 2 +- drivers/video/via/via_modesetting.c | 8 ++++---- drivers/video/via/via_modesetting.h | 6 +++--- 6 files changed, 13 insertions(+), 13 deletions(-)