diff mbox

[3/4] drm/tilcdc: add encoder slave

Message ID 1358894185-21617-4-git-send-email-robdclark@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rob Clark Jan. 22, 2013, 10:36 p.m. UTC
Add output panel driver for i2c encoder slaves.

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/gpu/drm/tilcdc/Kconfig        |  12 ++
 drivers/gpu/drm/tilcdc/Makefile       |   1 +
 drivers/gpu/drm/tilcdc/tilcdc_drv.c   |   5 +-
 drivers/gpu/drm/tilcdc/tilcdc_slave.c | 380 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/tilcdc/tilcdc_slave.h |  26 +++
 5 files changed, 423 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_slave.c
 create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_slave.h

Comments

Daniel Vetter Jan. 24, 2013, 12:43 p.m. UTC | #1
On Tue, Jan 22, 2013 at 04:36:24PM -0600, Rob Clark wrote:
> Add output panel driver for i2c encoder slaves.
> 
> Signed-off-by: Rob Clark <robdclark@gmail.com>

A few questions below, otherwise

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
>  drivers/gpu/drm/tilcdc/Kconfig        |  12 ++
>  drivers/gpu/drm/tilcdc/Makefile       |   1 +
>  drivers/gpu/drm/tilcdc/tilcdc_drv.c   |   5 +-
>  drivers/gpu/drm/tilcdc/tilcdc_slave.c | 380 ++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/tilcdc/tilcdc_slave.h |  26 +++
>  5 files changed, 423 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_slave.c
>  create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_slave.h
> 
> diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
> index ee9b592..99beca2 100644
> --- a/drivers/gpu/drm/tilcdc/Kconfig
> +++ b/drivers/gpu/drm/tilcdc/Kconfig
> @@ -8,3 +8,15 @@ config DRM_TILCDC
>  	  Choose this option if you have an TI SoC with LCDC display
>  	  controller, for example AM33xx in beagle-bone, DA8xx, or
>  	  OMAP-L1xx.  This driver replaces the FB_DA8XX fbdev driver.
> +
> +menu "I2C encoder or helper chips"
> +	depends on DRM && DRM_KMS_HELPER && I2C
> +
> +config DRM_I2C_NXP_TDA998X
> +	tristate "NXP Semiconductors TDA998X HDMI encoder"
> +	default m if DRM_TILCDC
> +	help
> +	  Support for NXP Semiconductors TDA998X HDMI encoders.
> +
> +endmenu
> +

Shouldn't that hunk be in patch 2?

> diff --git a/drivers/gpu/drm/tilcdc/Makefile b/drivers/gpu/drm/tilcdc/Makefile
> index 1359cc2..aa9097e 100644
> --- a/drivers/gpu/drm/tilcdc/Makefile
> +++ b/drivers/gpu/drm/tilcdc/Makefile
> @@ -3,6 +3,7 @@ ccflags-y := -Iinclude/drm -Werror
>  tilcdc-y := \
>  	tilcdc_crtc.o \
>  	tilcdc_tfp410.o \
> +	tilcdc_slave.o \
>  	tilcdc_drv.o
>  
>  obj-$(CONFIG_DRM_TILCDC)	+= tilcdc.o
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> index cf1fddc..ca76dbe 100644
> --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> @@ -20,6 +20,7 @@
>  #include "tilcdc_drv.h"
>  #include "tilcdc_regs.h"
>  #include "tilcdc_tfp410.h"
> +#include "tilcdc_slave.h"
>  
>  #include "drm_fb_helper.h"
>  
> @@ -587,6 +588,7 @@ static int __init tilcdc_drm_init(void)
>  {
>  	DBG("init");
>  	tilcdc_tfp410_init();
> +	tilcdc_slave_init();
>  	return platform_driver_register(&tilcdc_platform_driver);
>  }
>  
> @@ -594,10 +596,11 @@ static void __exit tilcdc_drm_fini(void)
>  {
>  	DBG("fini");
>  	tilcdc_tfp410_fini();
> +	tilcdc_slave_fini();
>  	platform_driver_unregister(&tilcdc_platform_driver);
>  }
>  
> -module_init(tilcdc_drm_init);
> +late_initcall(tilcdc_drm_init);
>  module_exit(tilcdc_drm_fini);
>  
>  MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
> new file mode 100644
> index 0000000..b6f3e63
> --- /dev/null
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
> @@ -0,0 +1,380 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments
> + * Author: Rob Clark <robdclark@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/of_i2c.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <drm/drm_encoder_slave.h>
> +
> +#include "tilcdc_drv.h"
> +
> +struct slave_module {
> +	struct tilcdc_module base;
> +	struct i2c_adapter *i2c;
> +};
> +#define to_slave_module(x) container_of(x, struct slave_module, base)
> +
> +static const struct tilcdc_panel_info slave_info = {
> +		.min_bpp                = 16,
> +		.max_bpp                = 16,
> +		.bpp                    = 16,
> +		.ac_bias                = 255,
> +		.ac_bias_intrpt         = 0,
> +		.dma_burst_sz           = 16,
> +		.fdd                    = 0x80,
> +		.tft_alt_mode           = 0,
> +		.stn_565_mode           = 0,
> +		.mono_8bit_mode         = 0,
> +		.sync_edge              = 0,
> +		.sync_ctrl              = 1,
> +		.raster_order           = 0,
> +};
> +
> +
> +/*
> + * Encoder:
> + */
> +
> +struct slave_encoder {
> +	struct drm_encoder_slave base;
> +	struct slave_module *mod;
> +};
> +#define to_slave_encoder(x) container_of(to_encoder_slave(x), struct slave_encoder, base)

Since you have a 1:1:1 relationship between module/drm_encoder, the
drm_encoder_slave and the connector I'd just smash this all into one
struct. Pure bikeshed though ;-)

> +
> +static inline struct drm_encoder_slave_funcs *
> +get_slave_funcs(struct drm_encoder *enc)
> +{
> +	return to_encoder_slave(enc)->slave_funcs;
> +}
> +
> +static void slave_encoder_destroy(struct drm_encoder *encoder)
> +{
> +	struct slave_encoder *slave_encoder = to_slave_encoder(encoder);
> +	if (get_slave_funcs(encoder))
> +		get_slave_funcs(encoder)->destroy(encoder);
> +	drm_encoder_cleanup(encoder);
> +	kfree(slave_encoder);
> +}
> +
> +static void slave_encoder_prepare(struct drm_encoder *encoder)
> +{
> +	drm_i2c_encoder_prepare(encoder);
> +	tilcdc_crtc_set_panel_info(encoder->crtc, &slave_info);
> +}
> +
> +static const struct drm_encoder_funcs slave_encoder_funcs = {
> +		.destroy        = slave_encoder_destroy,
> +};
> +
> +static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
> +		.dpms           = drm_i2c_encoder_dpms,
> +		.mode_fixup     = drm_i2c_encoder_mode_fixup,
> +		.prepare        = slave_encoder_prepare,
> +		.commit         = drm_i2c_encoder_commit,
> +		.mode_set       = drm_i2c_encoder_mode_set,
> +		.save           = drm_i2c_encoder_save,
> +		.restore        = drm_i2c_encoder_restore,
> +};
> +
> +static const struct i2c_board_info info = {
> +		I2C_BOARD_INFO("tda998x", 0x70)
> +};
> +
> +static struct drm_encoder *slave_encoder_create(struct drm_device *dev,
> +		struct slave_module *mod)
> +{
> +	struct slave_encoder *slave_encoder;
> +	struct drm_encoder *encoder;
> +	int ret;
> +
> +	slave_encoder = kzalloc(sizeof(*slave_encoder), GFP_KERNEL);
> +	if (!slave_encoder) {
> +		dev_err(dev->dev, "allocation failed\n");
> +		return NULL;
> +	}
> +
> +	slave_encoder->mod = mod;
> +
> +	encoder = &slave_encoder->base.base;
> +	encoder->possible_crtcs = 1;
> +
> +	ret = drm_encoder_init(dev, encoder, &slave_encoder_funcs,
> +			DRM_MODE_ENCODER_LVDS);

DRM_MODE_ENCODER_TMDS? Although I guess adding a new kind of
multi-function encoder type would make more sense and also useful in other
places. E.g. i915-sdvo/dvo just set meaningless types for multi-function
encoders (i.e. more than one connector on the same output), namely the
type which matches the connector last initalized.

> +	if (ret)
> +		goto fail;
> +
> +	drm_encoder_helper_add(encoder, &slave_encoder_helper_funcs);
> +
> +	ret = drm_i2c_encoder_init(dev, to_encoder_slave(encoder), mod->i2c, &info);
> +	if (ret)
> +		goto fail;
> +
> +	return encoder;
> +
> +fail:
> +	slave_encoder_destroy(encoder);
> +	return NULL;
> +}
> +
> +/*
> + * Connector:
> + */
> +
> +struct slave_connector {
> +	struct drm_connector base;
> +
> +	struct drm_encoder *encoder;  /* our connected encoder */
> +	struct slave_module *mod;
> +};
> +#define to_slave_connector(x) container_of(x, struct slave_connector, base)
> +
> +static void slave_connector_destroy(struct drm_connector *connector)
> +{
> +	struct slave_connector *slave_connector = to_slave_connector(connector);
> +	drm_connector_cleanup(connector);
> +	kfree(slave_connector);
> +}
> +
> +static enum drm_connector_status slave_connector_detect(
> +		struct drm_connector *connector,
> +		bool force)
> +{
> +	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
> +	return get_slave_funcs(encoder)->detect(encoder, connector);
> +}
> +
> +static int slave_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
> +	return get_slave_funcs(encoder)->get_modes(encoder, connector);
> +}
> +
> +static int slave_connector_mode_valid(struct drm_connector *connector,
> +		  struct drm_display_mode *mode)
> +{
> +	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
> +	struct tilcdc_drm_private *priv = connector->dev->dev_private;
> +	int ret;
> +
> +	ret = tilcdc_crtc_mode_valid(priv->crtc, mode);
> +	if (ret != MODE_OK)
> +		return ret;
> +
> +	return get_slave_funcs(encoder)->mode_valid(encoder, mode);
> +}
> +
> +static struct drm_encoder *slave_connector_best_encoder(
> +		struct drm_connector *connector)
> +{
> +	struct slave_connector *slave_connector = to_slave_connector(connector);
> +	return slave_connector->encoder;
> +}
> +
> +static int slave_connector_set_property(struct drm_connector *connector,
> +		struct drm_property *property, uint64_t value)
> +{
> +	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
> +	return get_slave_funcs(encoder)->set_property(encoder,
> +			connector, property, value);
> +}
> +
> +static const struct drm_connector_funcs slave_connector_funcs = {
> +	.destroy            = slave_connector_destroy,
> +	.dpms               = drm_helper_connector_dpms,
> +	.detect             = slave_connector_detect,
> +	.fill_modes         = drm_helper_probe_single_connector_modes,
> +	.set_property       = slave_connector_set_property,
> +};
> +
> +static const struct drm_connector_helper_funcs slave_connector_helper_funcs = {
> +	.get_modes          = slave_connector_get_modes,
> +	.mode_valid         = slave_connector_mode_valid,
> +	.best_encoder       = slave_connector_best_encoder,
> +};
> +
> +static struct drm_connector *slave_connector_create(struct drm_device *dev,
> +		struct slave_module *mod, struct drm_encoder *encoder)
> +{
> +	struct slave_connector *slave_connector;
> +	struct drm_connector *connector;
> +	int ret;
> +
> +	slave_connector = kzalloc(sizeof(*slave_connector), GFP_KERNEL);
> +	if (!slave_connector) {
> +		dev_err(dev->dev, "allocation failed\n");
> +		return NULL;
> +	}
> +
> +	slave_connector->encoder = encoder;
> +	slave_connector->mod = mod;
> +
> +	connector = &slave_connector->base;
> +
> +	drm_connector_init(dev, connector, &slave_connector_funcs,
> +			DRM_MODE_CONNECTOR_HDMIA);

Shouldn't we get the connector type from the drm_encoder_slave somehow?
Works here for now, so just food for thought for future encoder slave
refactorings and infrastructure work.

> +	drm_connector_helper_add(connector, &slave_connector_helper_funcs);
> +
> +	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
> +			DRM_CONNECTOR_POLL_DISCONNECT;
> +
> +	connector->interlace_allowed = 0;
> +	connector->doublescan_allowed = 0;
> +
> +	get_slave_funcs(encoder)->create_resources(encoder, connector);
> +
> +	ret = drm_mode_connector_attach_encoder(connector, encoder);
> +	if (ret)
> +		goto fail;
> +
> +	drm_sysfs_connector_add(connector);
> +
> +	return connector;
> +
> +fail:
> +	slave_connector_destroy(connector);
> +	return NULL;
> +}
> +
> +/*
> + * Module:
> + */
> +
> +static int slave_modeset_init(struct tilcdc_module *mod, struct drm_device *dev)
> +{
> +	struct slave_module *slave_mod = to_slave_module(mod);
> +	struct tilcdc_drm_private *priv = dev->dev_private;
> +	struct drm_encoder *encoder;
> +	struct drm_connector *connector;
> +
> +	encoder = slave_encoder_create(dev, slave_mod);
> +	if (!encoder)
> +		return -ENOMEM;
> +
> +	connector = slave_connector_create(dev, slave_mod, encoder);
> +	if (!connector)
> +		return -ENOMEM;
> +
> +	priv->encoders[priv->num_encoders++] = encoder;
> +	priv->connectors[priv->num_connectors++] = connector;
> +
> +	return 0;
> +}
> +
> +static void slave_destroy(struct tilcdc_module *mod)
> +{
> +	struct slave_module *slave_mod = to_slave_module(mod);
> +
> +	tilcdc_module_cleanup(mod);
> +	kfree(slave_mod);
> +}
> +
> +static const struct tilcdc_module_ops slave_module_ops = {
> +		.modeset_init = slave_modeset_init,
> +		.destroy = slave_destroy,
> +};
> +
> +/*
> + * Device:
> + */
> +
> +static struct of_device_id slave_of_match[];
> +
> +static int slave_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct device_node *i2c_node;
> +	struct slave_module *slave_mod;
> +	struct tilcdc_module *mod;
> +	struct pinctrl *pinctrl;
> +	uint32_t i2c_phandle;
> +	int ret = -EINVAL;
> +
> +	/* bail out early if no DT data: */
> +	if (!node) {
> +		dev_err(&pdev->dev, "device-tree data is missing\n");
> +		return -ENXIO;
> +	}
> +
> +	slave_mod = kzalloc(sizeof(*slave_mod), GFP_KERNEL);
> +	if (!slave_mod)
> +		return -ENOMEM;
> +
> +	mod = &slave_mod->base;
> +
> +	tilcdc_module_init(mod, "slave", &slave_module_ops);
> +
> +	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> +	if (IS_ERR(pinctrl))
> +		dev_warn(&pdev->dev, "pins are not configured\n");
> +
> +	if (of_property_read_u32(node, "i2c", &i2c_phandle)) {
> +		dev_err(&pdev->dev, "could not get i2c bus phandle\n");
> +		goto fail;
> +	}
> +
> +	i2c_node = of_find_node_by_phandle(i2c_phandle);
> +	if (!i2c_node) {
> +		dev_err(&pdev->dev, "could not get i2c bus node\n");
> +		goto fail;
> +	}
> +
> +	slave_mod->i2c = of_find_i2c_adapter_by_node(i2c_node);
> +	if (!slave_mod->i2c) {
> +		dev_err(&pdev->dev, "could not get i2c\n");
> +		goto fail;
> +	}
> +
> +	of_node_put(i2c_node);
> +
> +	return 0;
> +
> +fail:
> +	slave_destroy(mod);
> +	return ret;
> +}
> +
> +static int slave_remove(struct platform_device *pdev)
> +{
> +	return 0;
> +}
> +
> +static struct of_device_id slave_of_match[] = {
> +		{ .compatible = "tilcdc,slave", },
> +		{ },
> +};
> +MODULE_DEVICE_TABLE(of, slave_of_match);
> +
> +struct platform_driver slave_driver = {
> +	.probe = slave_probe,
> +	.remove = slave_remove,
> +	.driver = {
> +		.owner = THIS_MODULE,
> +		.name = "slave",
> +		.of_match_table = slave_of_match,
> +	},
> +};

No idea how this devicetree matching stuff is supposed to work, but I
guess this needs to be updated in the devictree docs like the base match.

> +
> +int __init tilcdc_slave_init(void)
> +{
> +	return platform_driver_register(&slave_driver);
> +}
> +
> +void __exit tilcdc_slave_fini(void)
> +{
> +	platform_driver_unregister(&slave_driver);
> +}
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.h b/drivers/gpu/drm/tilcdc/tilcdc_slave.h
> new file mode 100644
> index 0000000..2f85048
> --- /dev/null
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.h
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments
> + * Author: Rob Clark <robdclark@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __TILCDC_SLAVE_H__
> +#define __TILCDC_SLAVE_H__
> +
> +/* sub-module for i2c slave encoder output */
> +
> +int tilcdc_slave_init(void);
> +void tilcdc_slave_fini(void);
> +
> +#endif /* __TILCDC_SLAVE_H__ */
> -- 
> 1.8.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
Daniel Vetter Jan. 24, 2013, 1:01 p.m. UTC | #2
On Tue, Jan 22, 2013 at 04:36:24PM -0600, Rob Clark wrote:
> Add output panel driver for i2c encoder slaves.
> 
> Signed-off-by: Rob Clark <robdclark@gmail.com>

Found some more stuff ...

[cut]

> +static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
> +		.dpms           = drm_i2c_encoder_dpms,
> +		.mode_fixup     = drm_i2c_encoder_mode_fixup,
> +		.prepare        = slave_encoder_prepare,
> +		.commit         = drm_i2c_encoder_commit,
> +		.mode_set       = drm_i2c_encoder_mode_set,
> +		.save           = drm_i2c_encoder_save,
> +		.restore        = drm_i2c_encoder_restore,
> +};

I couldn't find these wrappers anywhere ...

> +
> +static const struct i2c_board_info info = {
> +		I2C_BOARD_INFO("tda998x", 0x70)
> +};

Shouldn't there be some of/devicetree thing to tell us which one to load?
-Daniel
Rob Clark Jan. 24, 2013, 2:26 p.m. UTC | #3
On Thu, Jan 24, 2013 at 6:43 AM, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Tue, Jan 22, 2013 at 04:36:24PM -0600, Rob Clark wrote:
>> Add output panel driver for i2c encoder slaves.
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
> A few questions below, otherwise
>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>> ---

[snip]

>> diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
>> index ee9b592..99beca2 100644
>> --- a/drivers/gpu/drm/tilcdc/Kconfig
>> +++ b/drivers/gpu/drm/tilcdc/Kconfig
>> @@ -8,3 +8,15 @@ config DRM_TILCDC
>>         Choose this option if you have an TI SoC with LCDC display
>>         controller, for example AM33xx in beagle-bone, DA8xx, or
>>         OMAP-L1xx.  This driver replaces the FB_DA8XX fbdev driver.
>> +
>> +menu "I2C encoder or helper chips"
>> +     depends on DRM && DRM_KMS_HELPER && I2C
>> +
>> +config DRM_I2C_NXP_TDA998X
>> +     tristate "NXP Semiconductors TDA998X HDMI encoder"
>> +     default m if DRM_TILCDC
>> +     help
>> +       Support for NXP Semiconductors TDA998X HDMI encoders.
>> +
>> +endmenu
>> +
>
> Shouldn't that hunk be in patch 2?

yeah, probably.. I just copied how it was done in nouveau, but I think
probably the Kconfig for the i2c encoder slaves should be moved into
drivers/gpu/drm/i2c

[snip]

>> +/*
>> + * Encoder:
>> + */
>> +
>> +struct slave_encoder {
>> +     struct drm_encoder_slave base;
>> +     struct slave_module *mod;
>> +};
>> +#define to_slave_encoder(x) container_of(to_encoder_slave(x), struct slave_encoder, base)
>
> Since you have a 1:1:1 relationship between module/drm_encoder, the
> drm_encoder_slave and the connector I'd just smash this all into one
> struct. Pure bikeshed though ;-)

yeah, but drm_encoder_slave is coming from drm core

[snip]

>> +static struct drm_encoder *slave_encoder_create(struct drm_device *dev,
>> +             struct slave_module *mod)
>> +{
>> +     struct slave_encoder *slave_encoder;
>> +     struct drm_encoder *encoder;
>> +     int ret;
>> +
>> +     slave_encoder = kzalloc(sizeof(*slave_encoder), GFP_KERNEL);
>> +     if (!slave_encoder) {
>> +             dev_err(dev->dev, "allocation failed\n");
>> +             return NULL;
>> +     }
>> +
>> +     slave_encoder->mod = mod;
>> +
>> +     encoder = &slave_encoder->base.base;
>> +     encoder->possible_crtcs = 1;
>> +
>> +     ret = drm_encoder_init(dev, encoder, &slave_encoder_funcs,
>> +                     DRM_MODE_ENCODER_LVDS);
>
> DRM_MODE_ENCODER_TMDS? Although I guess adding a new kind of
> multi-function encoder type would make more sense and also useful in other
> places. E.g. i915-sdvo/dvo just set meaningless types for multi-function
> encoders (i.e. more than one connector on the same output), namely the
> type which matches the connector last initalized.

I suppose TDMS makes more sense.. perhaps getting both this and
connector type from the encoder-slave would make the most sense, but I
can change it to TDMS for now

[snip]

>> +static struct drm_connector *slave_connector_create(struct drm_device *dev,
>> +             struct slave_module *mod, struct drm_encoder *encoder)
>> +{
>> +     struct slave_connector *slave_connector;
>> +     struct drm_connector *connector;
>> +     int ret;
>> +
>> +     slave_connector = kzalloc(sizeof(*slave_connector), GFP_KERNEL);
>> +     if (!slave_connector) {
>> +             dev_err(dev->dev, "allocation failed\n");
>> +             return NULL;
>> +     }
>> +
>> +     slave_connector->encoder = encoder;
>> +     slave_connector->mod = mod;
>> +
>> +     connector = &slave_connector->base;
>> +
>> +     drm_connector_init(dev, connector, &slave_connector_funcs,
>> +                     DRM_MODE_CONNECTOR_HDMIA);
>
> Shouldn't we get the connector type from the drm_encoder_slave somehow?
> Works here for now, so just food for thought for future encoder slave
> refactorings and infrastructure work.

yeah, getting it from the encoder slave makes the most sense

[snip]

>> +static struct of_device_id slave_of_match[] = {
>> +             { .compatible = "tilcdc,slave", },
>> +             { },
>> +};
>> +MODULE_DEVICE_TABLE(of, slave_of_match);
>> +
>> +struct platform_driver slave_driver = {
>> +     .probe = slave_probe,
>> +     .remove = slave_remove,
>> +     .driver = {
>> +             .owner = THIS_MODULE,
>> +             .name = "slave",
>> +             .of_match_table = slave_of_match,
>> +     },
>> +};
>
> No idea how this devicetree matching stuff is supposed to work, but I
> guess this needs to be updated in the devictree docs like the base match.

yeah, I didn't realize previously about the DT bindings docs, so I
need to look into that

BR,
-R
Rob Clark Jan. 24, 2013, 2:31 p.m. UTC | #4
On Thu, Jan 24, 2013 at 7:01 AM, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Tue, Jan 22, 2013 at 04:36:24PM -0600, Rob Clark wrote:
>> Add output panel driver for i2c encoder slaves.
>>
>> Signed-off-by: Rob Clark <robdclark@gmail.com>
>
> Found some more stuff ...
>
> [cut]
>
>> +static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
>> +             .dpms           = drm_i2c_encoder_dpms,
>> +             .mode_fixup     = drm_i2c_encoder_mode_fixup,
>> +             .prepare        = slave_encoder_prepare,
>> +             .commit         = drm_i2c_encoder_commit,
>> +             .mode_set       = drm_i2c_encoder_mode_set,
>> +             .save           = drm_i2c_encoder_save,
>> +             .restore        = drm_i2c_encoder_restore,
>> +};
>
> I couldn't find these wrappers anywhere ...

this is in one of the dependent patches (also on my tilcdc-next branch):

https://patchwork.kernel.org/patch/1950971/

I also cleaned up nouveau to use 'em:

https://patchwork.kernel.org/patch/1951051/

>> +
>> +static const struct i2c_board_info info = {
>> +             I2C_BOARD_INFO("tda998x", 0x70)
>> +};
>
> Shouldn't there be some of/devicetree thing to tell us which one to load?

There are limited options for the i2c addresses, and all the boards
I've seen which have this part are at 0x70 and 0x34 for CEC.  Probably
the CEC address needs to come from a config struct or maybe the i2c
encoder just gets passed a 'struct device_node *'.  I'm not really
sure the best way to handle that to share the encoder between DT and
non-DT platforms, and since I didn't really need the configurability
yet, I just left that for now and decided we could figure out how to
handle that as the need arose.

BR,
-R

> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
diff mbox

Patch

diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
index ee9b592..99beca2 100644
--- a/drivers/gpu/drm/tilcdc/Kconfig
+++ b/drivers/gpu/drm/tilcdc/Kconfig
@@ -8,3 +8,15 @@  config DRM_TILCDC
 	  Choose this option if you have an TI SoC with LCDC display
 	  controller, for example AM33xx in beagle-bone, DA8xx, or
 	  OMAP-L1xx.  This driver replaces the FB_DA8XX fbdev driver.
+
+menu "I2C encoder or helper chips"
+	depends on DRM && DRM_KMS_HELPER && I2C
+
+config DRM_I2C_NXP_TDA998X
+	tristate "NXP Semiconductors TDA998X HDMI encoder"
+	default m if DRM_TILCDC
+	help
+	  Support for NXP Semiconductors TDA998X HDMI encoders.
+
+endmenu
+
diff --git a/drivers/gpu/drm/tilcdc/Makefile b/drivers/gpu/drm/tilcdc/Makefile
index 1359cc2..aa9097e 100644
--- a/drivers/gpu/drm/tilcdc/Makefile
+++ b/drivers/gpu/drm/tilcdc/Makefile
@@ -3,6 +3,7 @@  ccflags-y := -Iinclude/drm -Werror
 tilcdc-y := \
 	tilcdc_crtc.o \
 	tilcdc_tfp410.o \
+	tilcdc_slave.o \
 	tilcdc_drv.o
 
 obj-$(CONFIG_DRM_TILCDC)	+= tilcdc.o
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index cf1fddc..ca76dbe 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -20,6 +20,7 @@ 
 #include "tilcdc_drv.h"
 #include "tilcdc_regs.h"
 #include "tilcdc_tfp410.h"
+#include "tilcdc_slave.h"
 
 #include "drm_fb_helper.h"
 
@@ -587,6 +588,7 @@  static int __init tilcdc_drm_init(void)
 {
 	DBG("init");
 	tilcdc_tfp410_init();
+	tilcdc_slave_init();
 	return platform_driver_register(&tilcdc_platform_driver);
 }
 
@@ -594,10 +596,11 @@  static void __exit tilcdc_drm_fini(void)
 {
 	DBG("fini");
 	tilcdc_tfp410_fini();
+	tilcdc_slave_fini();
 	platform_driver_unregister(&tilcdc_platform_driver);
 }
 
-module_init(tilcdc_drm_init);
+late_initcall(tilcdc_drm_init);
 module_exit(tilcdc_drm_fini);
 
 MODULE_AUTHOR("Rob Clark <robdclark@gmail.com");
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
new file mode 100644
index 0000000..b6f3e63
--- /dev/null
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -0,0 +1,380 @@ 
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/of_i2c.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <drm/drm_encoder_slave.h>
+
+#include "tilcdc_drv.h"
+
+struct slave_module {
+	struct tilcdc_module base;
+	struct i2c_adapter *i2c;
+};
+#define to_slave_module(x) container_of(x, struct slave_module, base)
+
+static const struct tilcdc_panel_info slave_info = {
+		.min_bpp                = 16,
+		.max_bpp                = 16,
+		.bpp                    = 16,
+		.ac_bias                = 255,
+		.ac_bias_intrpt         = 0,
+		.dma_burst_sz           = 16,
+		.fdd                    = 0x80,
+		.tft_alt_mode           = 0,
+		.stn_565_mode           = 0,
+		.mono_8bit_mode         = 0,
+		.sync_edge              = 0,
+		.sync_ctrl              = 1,
+		.raster_order           = 0,
+};
+
+
+/*
+ * Encoder:
+ */
+
+struct slave_encoder {
+	struct drm_encoder_slave base;
+	struct slave_module *mod;
+};
+#define to_slave_encoder(x) container_of(to_encoder_slave(x), struct slave_encoder, base)
+
+static inline struct drm_encoder_slave_funcs *
+get_slave_funcs(struct drm_encoder *enc)
+{
+	return to_encoder_slave(enc)->slave_funcs;
+}
+
+static void slave_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct slave_encoder *slave_encoder = to_slave_encoder(encoder);
+	if (get_slave_funcs(encoder))
+		get_slave_funcs(encoder)->destroy(encoder);
+	drm_encoder_cleanup(encoder);
+	kfree(slave_encoder);
+}
+
+static void slave_encoder_prepare(struct drm_encoder *encoder)
+{
+	drm_i2c_encoder_prepare(encoder);
+	tilcdc_crtc_set_panel_info(encoder->crtc, &slave_info);
+}
+
+static const struct drm_encoder_funcs slave_encoder_funcs = {
+		.destroy        = slave_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
+		.dpms           = drm_i2c_encoder_dpms,
+		.mode_fixup     = drm_i2c_encoder_mode_fixup,
+		.prepare        = slave_encoder_prepare,
+		.commit         = drm_i2c_encoder_commit,
+		.mode_set       = drm_i2c_encoder_mode_set,
+		.save           = drm_i2c_encoder_save,
+		.restore        = drm_i2c_encoder_restore,
+};
+
+static const struct i2c_board_info info = {
+		I2C_BOARD_INFO("tda998x", 0x70)
+};
+
+static struct drm_encoder *slave_encoder_create(struct drm_device *dev,
+		struct slave_module *mod)
+{
+	struct slave_encoder *slave_encoder;
+	struct drm_encoder *encoder;
+	int ret;
+
+	slave_encoder = kzalloc(sizeof(*slave_encoder), GFP_KERNEL);
+	if (!slave_encoder) {
+		dev_err(dev->dev, "allocation failed\n");
+		return NULL;
+	}
+
+	slave_encoder->mod = mod;
+
+	encoder = &slave_encoder->base.base;
+	encoder->possible_crtcs = 1;
+
+	ret = drm_encoder_init(dev, encoder, &slave_encoder_funcs,
+			DRM_MODE_ENCODER_LVDS);
+	if (ret)
+		goto fail;
+
+	drm_encoder_helper_add(encoder, &slave_encoder_helper_funcs);
+
+	ret = drm_i2c_encoder_init(dev, to_encoder_slave(encoder), mod->i2c, &info);
+	if (ret)
+		goto fail;
+
+	return encoder;
+
+fail:
+	slave_encoder_destroy(encoder);
+	return NULL;
+}
+
+/*
+ * Connector:
+ */
+
+struct slave_connector {
+	struct drm_connector base;
+
+	struct drm_encoder *encoder;  /* our connected encoder */
+	struct slave_module *mod;
+};
+#define to_slave_connector(x) container_of(x, struct slave_connector, base)
+
+static void slave_connector_destroy(struct drm_connector *connector)
+{
+	struct slave_connector *slave_connector = to_slave_connector(connector);
+	drm_connector_cleanup(connector);
+	kfree(slave_connector);
+}
+
+static enum drm_connector_status slave_connector_detect(
+		struct drm_connector *connector,
+		bool force)
+{
+	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
+	return get_slave_funcs(encoder)->detect(encoder, connector);
+}
+
+static int slave_connector_get_modes(struct drm_connector *connector)
+{
+	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
+	return get_slave_funcs(encoder)->get_modes(encoder, connector);
+}
+
+static int slave_connector_mode_valid(struct drm_connector *connector,
+		  struct drm_display_mode *mode)
+{
+	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
+	struct tilcdc_drm_private *priv = connector->dev->dev_private;
+	int ret;
+
+	ret = tilcdc_crtc_mode_valid(priv->crtc, mode);
+	if (ret != MODE_OK)
+		return ret;
+
+	return get_slave_funcs(encoder)->mode_valid(encoder, mode);
+}
+
+static struct drm_encoder *slave_connector_best_encoder(
+		struct drm_connector *connector)
+{
+	struct slave_connector *slave_connector = to_slave_connector(connector);
+	return slave_connector->encoder;
+}
+
+static int slave_connector_set_property(struct drm_connector *connector,
+		struct drm_property *property, uint64_t value)
+{
+	struct drm_encoder *encoder = to_slave_connector(connector)->encoder;
+	return get_slave_funcs(encoder)->set_property(encoder,
+			connector, property, value);
+}
+
+static const struct drm_connector_funcs slave_connector_funcs = {
+	.destroy            = slave_connector_destroy,
+	.dpms               = drm_helper_connector_dpms,
+	.detect             = slave_connector_detect,
+	.fill_modes         = drm_helper_probe_single_connector_modes,
+	.set_property       = slave_connector_set_property,
+};
+
+static const struct drm_connector_helper_funcs slave_connector_helper_funcs = {
+	.get_modes          = slave_connector_get_modes,
+	.mode_valid         = slave_connector_mode_valid,
+	.best_encoder       = slave_connector_best_encoder,
+};
+
+static struct drm_connector *slave_connector_create(struct drm_device *dev,
+		struct slave_module *mod, struct drm_encoder *encoder)
+{
+	struct slave_connector *slave_connector;
+	struct drm_connector *connector;
+	int ret;
+
+	slave_connector = kzalloc(sizeof(*slave_connector), GFP_KERNEL);
+	if (!slave_connector) {
+		dev_err(dev->dev, "allocation failed\n");
+		return NULL;
+	}
+
+	slave_connector->encoder = encoder;
+	slave_connector->mod = mod;
+
+	connector = &slave_connector->base;
+
+	drm_connector_init(dev, connector, &slave_connector_funcs,
+			DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_helper_add(connector, &slave_connector_helper_funcs);
+
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			DRM_CONNECTOR_POLL_DISCONNECT;
+
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	get_slave_funcs(encoder)->create_resources(encoder, connector);
+
+	ret = drm_mode_connector_attach_encoder(connector, encoder);
+	if (ret)
+		goto fail;
+
+	drm_sysfs_connector_add(connector);
+
+	return connector;
+
+fail:
+	slave_connector_destroy(connector);
+	return NULL;
+}
+
+/*
+ * Module:
+ */
+
+static int slave_modeset_init(struct tilcdc_module *mod, struct drm_device *dev)
+{
+	struct slave_module *slave_mod = to_slave_module(mod);
+	struct tilcdc_drm_private *priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+
+	encoder = slave_encoder_create(dev, slave_mod);
+	if (!encoder)
+		return -ENOMEM;
+
+	connector = slave_connector_create(dev, slave_mod, encoder);
+	if (!connector)
+		return -ENOMEM;
+
+	priv->encoders[priv->num_encoders++] = encoder;
+	priv->connectors[priv->num_connectors++] = connector;
+
+	return 0;
+}
+
+static void slave_destroy(struct tilcdc_module *mod)
+{
+	struct slave_module *slave_mod = to_slave_module(mod);
+
+	tilcdc_module_cleanup(mod);
+	kfree(slave_mod);
+}
+
+static const struct tilcdc_module_ops slave_module_ops = {
+		.modeset_init = slave_modeset_init,
+		.destroy = slave_destroy,
+};
+
+/*
+ * Device:
+ */
+
+static struct of_device_id slave_of_match[];
+
+static int slave_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *i2c_node;
+	struct slave_module *slave_mod;
+	struct tilcdc_module *mod;
+	struct pinctrl *pinctrl;
+	uint32_t i2c_phandle;
+	int ret = -EINVAL;
+
+	/* bail out early if no DT data: */
+	if (!node) {
+		dev_err(&pdev->dev, "device-tree data is missing\n");
+		return -ENXIO;
+	}
+
+	slave_mod = kzalloc(sizeof(*slave_mod), GFP_KERNEL);
+	if (!slave_mod)
+		return -ENOMEM;
+
+	mod = &slave_mod->base;
+
+	tilcdc_module_init(mod, "slave", &slave_module_ops);
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&pdev->dev, "pins are not configured\n");
+
+	if (of_property_read_u32(node, "i2c", &i2c_phandle)) {
+		dev_err(&pdev->dev, "could not get i2c bus phandle\n");
+		goto fail;
+	}
+
+	i2c_node = of_find_node_by_phandle(i2c_phandle);
+	if (!i2c_node) {
+		dev_err(&pdev->dev, "could not get i2c bus node\n");
+		goto fail;
+	}
+
+	slave_mod->i2c = of_find_i2c_adapter_by_node(i2c_node);
+	if (!slave_mod->i2c) {
+		dev_err(&pdev->dev, "could not get i2c\n");
+		goto fail;
+	}
+
+	of_node_put(i2c_node);
+
+	return 0;
+
+fail:
+	slave_destroy(mod);
+	return ret;
+}
+
+static int slave_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct of_device_id slave_of_match[] = {
+		{ .compatible = "tilcdc,slave", },
+		{ },
+};
+MODULE_DEVICE_TABLE(of, slave_of_match);
+
+struct platform_driver slave_driver = {
+	.probe = slave_probe,
+	.remove = slave_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "slave",
+		.of_match_table = slave_of_match,
+	},
+};
+
+int __init tilcdc_slave_init(void)
+{
+	return platform_driver_register(&slave_driver);
+}
+
+void __exit tilcdc_slave_fini(void)
+{
+	platform_driver_unregister(&slave_driver);
+}
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.h b/drivers/gpu/drm/tilcdc/tilcdc_slave.h
new file mode 100644
index 0000000..2f85048
--- /dev/null
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.h
@@ -0,0 +1,26 @@ 
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TILCDC_SLAVE_H__
+#define __TILCDC_SLAVE_H__
+
+/* sub-module for i2c slave encoder output */
+
+int tilcdc_slave_init(void);
+void tilcdc_slave_fini(void);
+
+#endif /* __TILCDC_SLAVE_H__ */