@@ -523,17 +523,17 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
dmode->clock = vm->pixelclock / 1000;
dmode->flags = 0;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
dmode->flags |= DRM_MODE_FLAG_PHSYNC;
- else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW)
+ else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW)
dmode->flags |= DRM_MODE_FLAG_NHSYNC;
- if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
+ if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
dmode->flags |= DRM_MODE_FLAG_PVSYNC;
- else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW)
+ else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW)
dmode->flags |= DRM_MODE_FLAG_NVSYNC;
- if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+ if (vm->flags & DISPLAY_FLAGS_INTERLACED)
dmode->flags |= DRM_MODE_FLAG_INTERLACE;
- if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+ if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
drm_mode_set_name(dmode);
@@ -1398,13 +1398,13 @@ int fb_videomode_from_videomode(const struct videomode *vm,
fbmode->sync = 0;
fbmode->vmode = 0;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
- if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+ if (vm->flags & DISPLAY_FLAGS_INTERLACED)
fbmode->vmode |= FB_VMODE_INTERLACED;
- if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+ if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
fbmode->vmode |= FB_VMODE_DOUBLE;
fbmode->flag = 0;
@@ -79,25 +79,24 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
- dt->dmt_flags = 0;
- dt->data_flags = 0;
+ dt->flags = 0;
if (!of_property_read_u32(np, "vsync-active", &val))
- dt->dmt_flags |= val ? VESA_DMT_VSYNC_HIGH :
- VESA_DMT_VSYNC_LOW;
+ dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
+ DISPLAY_FLAGS_VSYNC_LOW;
if (!of_property_read_u32(np, "hsync-active", &val))
- dt->dmt_flags |= val ? VESA_DMT_HSYNC_HIGH :
- VESA_DMT_HSYNC_LOW;
+ dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
+ DISPLAY_FLAGS_HSYNC_LOW;
if (!of_property_read_u32(np, "de-active", &val))
- dt->data_flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+ dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
DISPLAY_FLAGS_DE_LOW;
if (!of_property_read_u32(np, "pixelclk-active", &val))
- dt->data_flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+ dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
DISPLAY_FLAGS_PIXDATA_NEGEDGE;
if (of_property_read_bool(np, "interlaced"))
- dt->data_flags |= DISPLAY_FLAGS_INTERLACED;
+ dt->flags |= DISPLAY_FLAGS_INTERLACED;
if (of_property_read_bool(np, "doublescan"))
- dt->data_flags |= DISPLAY_FLAGS_DOUBLESCAN;
+ dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
if (ret) {
pr_err("%s: error reading timing properties\n",
@@ -31,8 +31,7 @@ int videomode_from_timing(const struct display_timings *disp,
vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
- vm->dmt_flags = dt->dmt_flags;
- vm->data_flags = dt->data_flags;
+ vm->flags = dt->flags;
return 0;
}
@@ -12,19 +12,16 @@
#include <linux/bitops.h>
#include <linux/types.h>
-/* VESA display monitor timing parameters */
-#define VESA_DMT_HSYNC_LOW BIT(0)
-#define VESA_DMT_HSYNC_HIGH BIT(1)
-#define VESA_DMT_VSYNC_LOW BIT(2)
-#define VESA_DMT_VSYNC_HIGH BIT(3)
-
-/* display specific flags */
-#define DISPLAY_FLAGS_DE_LOW BIT(0) /* data enable flag */
-#define DISPLAY_FLAGS_DE_HIGH BIT(1)
-#define DISPLAY_FLAGS_PIXDATA_POSEDGE BIT(2) /* drive data on pos. edge */
-#define DISPLAY_FLAGS_PIXDATA_NEGEDGE BIT(3) /* drive data on neg. edge */
-#define DISPLAY_FLAGS_INTERLACED BIT(4)
-#define DISPLAY_FLAGS_DOUBLESCAN BIT(5)
+#define DISPLAY_FLAGS_HSYNC_LOW BIT(0)
+#define DISPLAY_FLAGS_HSYNC_HIGH BIT(1)
+#define DISPLAY_FLAGS_VSYNC_LOW BIT(2)
+#define DISPLAY_FLAGS_VSYNC_HIGH BIT(3)
+#define DISPLAY_FLAGS_DE_LOW BIT(4) /* data enable flag */
+#define DISPLAY_FLAGS_DE_HIGH BIT(5)
+#define DISPLAY_FLAGS_PIXDATA_POSEDGE BIT(6) /* drive data on pos. edge */
+#define DISPLAY_FLAGS_PIXDATA_NEGEDGE BIT(7) /* drive data on neg. edge */
+#define DISPLAY_FLAGS_INTERLACED BIT(8)
+#define DISPLAY_FLAGS_DOUBLESCAN BIT(9)
/*
* A single signal can be specified via a range of minimal and maximal values
@@ -72,8 +69,7 @@ struct display_timing {
struct timing_entry vback_porch; /* ver. back porch */
struct timing_entry vsync_len; /* ver. sync len */
- unsigned int dmt_flags; /* VESA DMT flags */
- unsigned int data_flags; /* video data flags */
+ unsigned int flags; /* display flags */
};
/*
@@ -29,8 +29,7 @@ struct videomode {
u32 vback_porch;
u32 vsync_len;
- unsigned int dmt_flags; /* VESA DMT flags */
- unsigned int data_flags; /* video data flags */
+ unsigned int flags; /* display flags */
};
/**
Both videomode and display_timing contain flags describing the modes. These are stored in dmt_flags and data_flags. There's no need to separate these flags, and having separate fields just makes the flags more difficult to use. This patch combines the fields and renames VESA_DMT_* flags to DISPLAY_FLAGS_*. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> --- drivers/gpu/drm/drm_modes.c | 12 ++++++------ drivers/video/fbmon.c | 8 ++++---- drivers/video/of_display_timing.c | 19 +++++++++---------- drivers/video/videomode.c | 3 +-- include/video/display_timing.h | 26 +++++++++++--------------- include/video/videomode.h | 3 +-- 6 files changed, 32 insertions(+), 39 deletions(-)