@@ -74,6 +74,13 @@ struct omap_crtc {
struct work_struct page_flip_work;
};
+uint32_t pipe2vbl(struct drm_crtc *crtc)
+{
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+ return dispc_mgr_get_vsync_irq(omap_crtc->channel);
+}
+
/*
* Manager-ops, callbacks from output when they need to configure
* the upstream part of the video pipe.
@@ -613,7 +620,13 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
omap_crtc->apply.pre_apply = omap_crtc_pre_apply;
omap_crtc->apply.post_apply = omap_crtc_post_apply;
- omap_crtc->apply_irq.irqmask = pipe2vbl(id);
+ omap_crtc->channel = channel;
+ omap_crtc->plane = plane;
+ omap_crtc->plane->crtc = crtc;
+ omap_crtc->name = channel_names[channel];
+ omap_crtc->pipe = id;
+
+ omap_crtc->apply_irq.irqmask = pipe2vbl(crtc);
omap_crtc->apply_irq.irq = omap_crtc_apply_irq;
omap_crtc->error_irq.irqmask =
@@ -621,12 +634,6 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
omap_crtc->error_irq.irq = omap_crtc_error_irq;
omap_irq_register(dev, &omap_crtc->error_irq);
- omap_crtc->channel = channel;
- omap_crtc->plane = plane;
- omap_crtc->plane->crtc = crtc;
- omap_crtc->name = channel_names[channel];
- omap_crtc->pipe = id;
-
/* temporary: */
omap_crtc->mgr.id = channel;
@@ -74,49 +74,48 @@ static int get_connector_type(struct omap_dss_device *dssdev)
}
}
+static bool channel_used(struct drm_device *dev, enum omap_channel channel)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ int i;
+
+ for (i = 0; i < priv->num_crtcs; i++) {
+ struct drm_crtc *crtc = priv->crtcs[i];
+
+ if (omap_crtc_channel(crtc) == channel)
+ return true;
+ }
+
+ return false;
+}
+
static int omap_modeset_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
struct omap_dss_device *dssdev = NULL;
int num_ovls = dss_feat_get_num_ovls();
- int id;
+ int num_mgrs = dss_feat_get_num_mgrs();
+ int num_crtcs;
+ int i, id = 0;
drm_mode_config_init(dev);
omap_drm_irq_install(dev);
/*
- * Create private planes and CRTCs for the last NUM_CRTCs overlay
- * plus manager:
- */
- for (id = 0; id < min(num_crtc, num_ovls); id++) {
- struct drm_plane *plane;
- struct drm_crtc *crtc;
-
- plane = omap_plane_init(dev, id, true);
- crtc = omap_crtc_init(dev, plane, pipe2chan(id), id);
-
- BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
- priv->crtcs[id] = crtc;
- priv->num_crtcs++;
-
- priv->planes[id] = plane;
- priv->num_planes++;
- }
-
- /*
- * Create normal planes for the remaining overlays:
+ * We usually don't want to create a CRTC for each manager, at least
+ * not until we have a way to expose private planes to userspace.
+ * Otherwise there would not be enough video pipes left for drm planes.
+ * We use the num_crtc argument to limit the number of crtcs we create.
*/
- for (; id < num_ovls; id++) {
- struct drm_plane *plane = omap_plane_init(dev, id, false);
+ num_crtcs = min3(num_crtc, num_mgrs, num_ovls);
- BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
- priv->planes[priv->num_planes++] = plane;
- }
+ dssdev = NULL;
for_each_dss_dev(dssdev) {
struct drm_connector *connector;
struct drm_encoder *encoder;
+ enum omap_channel channel;
if (!dssdev->driver) {
dev_warn(dev->dev, "%s has no driver.. skipping it\n",
@@ -157,16 +156,118 @@ static int omap_modeset_init(struct drm_device *dev)
drm_mode_connector_attach_encoder(connector, encoder);
+ /*
+ * if we have reached the limit of the crtcs we are allowed to
+ * create, let's not try to look for a crtc for this
+ * panel/encoder and onwards, we will, of course, populate the
+ * the possible_crtcs field for all the encoders with the final
+ * set of crtcs we create
+ */
+ if (id == num_crtcs)
+ continue;
+
+ /*
+ * get the recommended DISPC channel for this encoder. For now,
+ * we only try to get create a crtc out of the recommended, the
+ * other possible channels to which the encoder can connect are
+ * not considered.
+ */
+ channel = dssdev->output->dispc_channel;
+
+ /*
+ * if this channel hasn't already been taken by a previously
+ * allocated crtc, we create a new crtc for it
+ */
+ if (!channel_used(dev, channel)) {
+ struct drm_plane *plane;
+ struct drm_crtc *crtc;
+
+ plane = omap_plane_init(dev, id, true);
+ crtc = omap_crtc_init(dev, plane, channel, id);
+
+ BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
+ priv->crtcs[id] = crtc;
+ priv->num_crtcs++;
+
+ priv->planes[id] = plane;
+ priv->num_planes++;
+
+ id++;
+ }
+ }
+
+ /*
+ * we have allocated crtcs according to the need of the panels/encoders,
+ * adding more crtcs here if needed
+ */
+ for (; id < num_crtcs; id++) {
+
+ /* find a free manager for this crtc */
+ for (i = 0; i < num_mgrs; i++) {
+ if (!channel_used(dev, i)) {
+ struct drm_plane *plane;
+ struct drm_crtc *crtc;
+
+ plane = omap_plane_init(dev, id, true);
+ crtc = omap_crtc_init(dev, plane, i, id);
+
+ BUG_ON(priv->num_crtcs >=
+ ARRAY_SIZE(priv->crtcs));
+
+ priv->crtcs[id] = crtc;
+ priv->num_crtcs++;
+
+ priv->planes[id] = plane;
+ priv->num_planes++;
+
+ break;
+ } else {
+ continue;
+ }
+ }
+
+ if (i == num_mgrs) {
+ /* this shouldn't really happen */
+ dev_err(dev->dev, "no managers left for crtc\n");
+ return -ENOMEM;
+ }
+ }
+
+ /*
+ * Create normal planes for the remaining overlays:
+ */
+ for (; id < num_ovls; id++) {
+ struct drm_plane *plane = omap_plane_init(dev, id, false);
+
+ BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+ priv->planes[priv->num_planes++] = plane;
+ }
+
+ for (i = 0; i < priv->num_encoders; i++) {
+ struct drm_encoder *encoder = priv->encoders[i];
+ struct omap_dss_device *dssdev =
+ omap_encoder_get_dssdev(encoder);
+
/* figure out which crtc's we can connect the encoder to: */
encoder->possible_crtcs = 0;
for (id = 0; id < priv->num_crtcs; id++) {
- enum omap_dss_output_id supported_outputs =
- dss_feat_get_supported_outputs(pipe2chan(id));
+ struct drm_crtc *crtc = priv->crtcs[id];
+ enum omap_channel crtc_channel;
+ enum omap_dss_output_id supported_outputs;
+
+ crtc_channel = omap_crtc_channel(crtc);
+ supported_outputs =
+ dss_feat_get_supported_outputs(crtc_channel);
+
if (supported_outputs & dssdev->output->id)
encoder->possible_crtcs |= (1 << id);
}
}
+ DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n",
+ priv->num_planes, priv->num_crtcs, priv->num_encoders,
+ priv->num_connectors);
+
dev->mode_config.min_width = 32;
dev->mode_config.min_height = 32;
@@ -139,8 +139,8 @@ void omap_gem_describe_objects(struct list_head *list, struct seq_file *m);
int omap_gem_resume(struct device *dev);
#endif
-int omap_irq_enable_vblank(struct drm_device *dev, int crtc);
-void omap_irq_disable_vblank(struct drm_device *dev, int crtc);
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc_id);
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc_id);
irqreturn_t omap_irq_handler(DRM_IRQ_ARGS);
void omap_irq_preinstall(struct drm_device *dev);
int omap_irq_postinstall(struct drm_device *dev);
@@ -271,39 +271,9 @@ static inline int align_pitch(int pitch, int width, int bpp)
return ALIGN(pitch, 8 * bytespp);
}
-static inline enum omap_channel pipe2chan(int pipe)
-{
- int num_mgrs = dss_feat_get_num_mgrs();
-
- /*
- * We usually don't want to create a CRTC for each manager,
- * at least not until we have a way to expose private planes
- * to userspace. Otherwise there would not be enough video
- * pipes left for drm planes. The higher #'d managers tend
- * to have more features so start in reverse order.
- */
- return num_mgrs - pipe - 1;
-}
-
/* map crtc to vblank mask */
-static inline uint32_t pipe2vbl(int crtc)
-{
- enum omap_channel channel = pipe2chan(crtc);
- return dispc_mgr_get_vsync_irq(channel);
-}
-
-static inline int crtc2pipe(struct drm_device *dev, struct drm_crtc *crtc)
-{
- struct omap_drm_private *priv = dev->dev_private;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(priv->crtcs); i++)
- if (priv->crtcs[i] == crtc)
- return i;
-
- BUG(); /* bogus CRTC ptr */
- return -1;
-}
+uint32_t pipe2vbl(struct drm_crtc *crtc);
+struct omap_dss_device *omap_encoder_get_dssdev(struct drm_encoder *encoder);
/* should these be made into common util helpers?
*/
@@ -41,6 +41,13 @@ struct omap_encoder {
struct omap_dss_device *dssdev;
};
+struct omap_dss_device *omap_encoder_get_dssdev(struct drm_encoder *encoder)
+{
+ struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+
+ return omap_encoder->dssdev;
+}
+
static void omap_encoder_destroy(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
@@ -130,12 +130,13 @@ int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait,
* Zero on success, appropriate errno if the given @crtc's vblank
* interrupt cannot be enabled.
*/
-int omap_irq_enable_vblank(struct drm_device *dev, int crtc)
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc_id)
{
struct omap_drm_private *priv = dev->dev_private;
+ struct drm_crtc *crtc = priv->crtcs[crtc_id];
unsigned long flags;
- DBG("dev=%p, crtc=%d", dev, crtc);
+ DBG("dev=%p, crtc=%d", dev, crtc_id);
dispc_runtime_get();
spin_lock_irqsave(&list_lock, flags);
@@ -156,12 +157,13 @@ int omap_irq_enable_vblank(struct drm_device *dev, int crtc)
* a hardware vblank counter, this routine should be a no-op, since
* interrupts will have to stay on to keep the count accurate.
*/
-void omap_irq_disable_vblank(struct drm_device *dev, int crtc)
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc_id)
{
struct omap_drm_private *priv = dev->dev_private;
+ struct drm_crtc *crtc = priv->crtcs[crtc_id];
unsigned long flags;
- DBG("dev=%p, crtc=%d", dev, crtc);
+ DBG("dev=%p, crtc=%d", dev, crtc_id);
dispc_runtime_get();
spin_lock_irqsave(&list_lock, flags);
@@ -186,9 +188,12 @@ irqreturn_t omap_irq_handler(DRM_IRQ_ARGS)
VERB("irqs: %08x", irqstatus);
- for (id = 0; id < priv->num_crtcs; id++)
- if (irqstatus & pipe2vbl(id))
+ for (id = 0; id < priv->num_crtcs; id++) {
+ struct drm_crtc *crtc = priv->crtcs[id];
+
+ if (irqstatus & pipe2vbl(crtc))
drm_handle_vblank(dev, id);
+ }
spin_lock_irqsave(&list_lock, flags);
list_for_each_entry_safe(handler, n, &priv->irq_list, node) {
The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/gpu/drm/omapdrm/omap_crtc.c | 21 +++-- drivers/gpu/drm/omapdrm/omap_drv.c | 157 ++++++++++++++++++++++++++------ drivers/gpu/drm/omapdrm/omap_drv.h | 38 +------- drivers/gpu/drm/omapdrm/omap_encoder.c | 7 ++ drivers/gpu/drm/omapdrm/omap_irq.c | 17 ++-- 5 files changed, 165 insertions(+), 75 deletions(-)