Message ID | 1381935530-6393-1-git-send-email-thomas.wood@intel.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On Wed, Oct 16, 2013 at 03:58:50PM +0100, Thomas Wood wrote: > Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor > Specific Data Block to expose more stereo 3D modes. > > v2: Use (1 << 0) for consistency. (Ville Syrjälä) > Skip adding any modes if 3D_MASK is indicated as being present but > the length only includes 3D_Structure_ALL. (Ville Syrjälä) > Check that the value of HDMI_3D_LEN is large enough to include > 3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä) > v3: Increment offset before the length checks. (Ville Syrjälä) > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > --- > drivers/gpu/drm/drm_edid.c | 103 +++++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 94 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index 9e81609..f1764ec 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -2652,6 +2652,50 @@ static int add_hdmi_mode(struct drm_connector *connector, u8 vic) > return 1; > } > > +static int add_3d_struct_modes(struct drm_connector *connector, u16 structure, > + const u8 *video_db, u8 video_len, u8 video_index) > +{ > + struct drm_device *dev = connector->dev; > + struct drm_display_mode *newmode; > + int modes = 0; > + u8 cea_mode; > + > + if (video_db == NULL || video_index > video_len) > + return 0; > + > + /* CEA modes are numbered 1..127 */ > + cea_mode = (video_db[video_index] & 127) - 1; > + if (cea_mode >= ARRAY_SIZE(edid_cea_modes)) > + return 0; > + > + if (structure & (1 << 0)) { > + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); > + if (newmode) { > + newmode->flags |= DRM_MODE_FLAG_3D_FRAME_PACKING; > + drm_mode_probed_add(connector, newmode); > + modes++; > + } > + } > + if (structure & (1 << 6)) { > + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); > + if (newmode) { > + newmode->flags |= DRM_MODE_FLAG_3D_TOP_AND_BOTTOM; > + drm_mode_probed_add(connector, newmode); > + modes++; > + } > + } > + if (structure & (1 << 8)) { > + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); > + if (newmode) { > + newmode->flags = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; > + drm_mode_probed_add(connector, newmode); > + modes++; > + } > + } > + > + return modes; > +} > + > /* > * do_hdmi_vsdb_modes - Parse the HDMI Vendor Specific data block > * @connector: connector corresponding to the HDMI sink > @@ -2662,10 +2706,13 @@ static int add_hdmi_mode(struct drm_connector *connector, u8 vic) > * also adds the stereo 3d modes when applicable. > */ > static int > -do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) > +do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len, > + const u8 *video_db, u8 video_len) > { > - int modes = 0, offset = 0, i; > - u8 vic_len; > + int modes = 0, offset = 0, i, multi_present = 0; > + u8 vic_len, hdmi_3d_len = 0; > + u16 mask; > + u16 structure_all; > > if (len < 8) > goto out; > @@ -2689,11 +2736,16 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) > > /* 3D_Present */ > offset++; > - if (db[8 + offset] & (1 << 7)) > + if (db[8 + offset] & (1 << 7)) { > modes += add_hdmi_mandatory_stereo_modes(connector); > > + /* 3D_Multi_present */ > + multi_present = (db[8 + offset] & 0x60) >> 5; > + } > + > offset++; > vic_len = db[8 + offset] >> 5; > + hdmi_3d_len = db[8 + offset] & 0x1f; > > for (i = 0; i < vic_len && len >= (9 + offset + i); i++) { > u8 vic; > @@ -2701,6 +2753,35 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) > vic = db[9 + offset + i]; > modes += add_hdmi_mode(connector, vic); > } > + offset += 1 + vic_len; > + > + if (!(multi_present == 1 || multi_present == 2)) > + goto out; > + > + if ((multi_present == 1 && len < (9 + offset)) || > + (multi_present == 2 && len < (11 + offset))) > + goto out; > + > + if ((multi_present == 1 && hdmi_3d_len < 2) || > + (multi_present == 2 && hdmi_3d_len < 4)) > + goto out; > + > + /* 3D_Structure_ALL */ > + structure_all = (db[8 + offset] << 8) | db[9 + offset]; > + > + /* check if 3D_MASK is present */ > + if (multi_present == 2) > + mask = (db[10 + offset] << 8) | db[11 + offset]; > + else > + mask = 0xffff; > + > + for (i = 0; i < 16; i++) { > + if (mask & (1 << i)) > + modes += add_3d_struct_modes(connector, > + structure_all, > + video_db, > + video_len, i); > + } > > out: > return modes; > @@ -2759,8 +2840,8 @@ static int > add_cea_modes(struct drm_connector *connector, struct edid *edid) > { > const u8 *cea = drm_find_cea_extension(edid); > - const u8 *db, *hdmi = NULL; > - u8 dbl, hdmi_len; > + const u8 *db, *hdmi = NULL, *video = NULL; > + u8 dbl, hdmi_len, video_len = 0; > int modes = 0; > > if (cea && cea_revision(cea) >= 3) { > @@ -2773,8 +2854,11 @@ add_cea_modes(struct drm_connector *connector, struct edid *edid) > db = &cea[i]; > dbl = cea_db_payload_len(db); > > - if (cea_db_tag(db) == VIDEO_BLOCK) > - modes += do_cea_modes(connector, db + 1, dbl); > + if (cea_db_tag(db) == VIDEO_BLOCK) { > + video = db + 1; > + video_len = dbl; > + modes += do_cea_modes(connector, video, dbl); > + } > else if (cea_db_is_hdmi_vsdb(db)) { > hdmi = db; > hdmi_len = dbl; > @@ -2787,7 +2871,8 @@ add_cea_modes(struct drm_connector *connector, struct edid *edid) > * be patching their flags when the sink supports stereo 3D. > */ > if (hdmi) > - modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len); > + modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len, video, > + video_len); > > return modes; > } > -- > 1.8.3.1
On Wed, Oct 16, 2013 at 06:07:30PM +0300, Ville Syrjälä wrote: > On Wed, Oct 16, 2013 at 03:58:50PM +0100, Thomas Wood wrote: > > Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor > > Specific Data Block to expose more stereo 3D modes. > > > > v2: Use (1 << 0) for consistency. (Ville Syrjälä) > > Skip adding any modes if 3D_MASK is indicated as being present but > > the length only includes 3D_Structure_ALL. (Ville Syrjälä) > > Check that the value of HDMI_3D_LEN is large enough to include > > 3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä) > > v3: Increment offset before the length checks. (Ville Syrjälä) > > > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> > > Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Queued for -next, thanks for the patch. -Daniel
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 9e81609..f1764ec 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2652,6 +2652,50 @@ static int add_hdmi_mode(struct drm_connector *connector, u8 vic) return 1; } +static int add_3d_struct_modes(struct drm_connector *connector, u16 structure, + const u8 *video_db, u8 video_len, u8 video_index) +{ + struct drm_device *dev = connector->dev; + struct drm_display_mode *newmode; + int modes = 0; + u8 cea_mode; + + if (video_db == NULL || video_index > video_len) + return 0; + + /* CEA modes are numbered 1..127 */ + cea_mode = (video_db[video_index] & 127) - 1; + if (cea_mode >= ARRAY_SIZE(edid_cea_modes)) + return 0; + + if (structure & (1 << 0)) { + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); + if (newmode) { + newmode->flags |= DRM_MODE_FLAG_3D_FRAME_PACKING; + drm_mode_probed_add(connector, newmode); + modes++; + } + } + if (structure & (1 << 6)) { + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); + if (newmode) { + newmode->flags |= DRM_MODE_FLAG_3D_TOP_AND_BOTTOM; + drm_mode_probed_add(connector, newmode); + modes++; + } + } + if (structure & (1 << 8)) { + newmode = drm_mode_duplicate(dev, &edid_cea_modes[cea_mode]); + if (newmode) { + newmode->flags = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; + drm_mode_probed_add(connector, newmode); + modes++; + } + } + + return modes; +} + /* * do_hdmi_vsdb_modes - Parse the HDMI Vendor Specific data block * @connector: connector corresponding to the HDMI sink @@ -2662,10 +2706,13 @@ static int add_hdmi_mode(struct drm_connector *connector, u8 vic) * also adds the stereo 3d modes when applicable. */ static int -do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) +do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len, + const u8 *video_db, u8 video_len) { - int modes = 0, offset = 0, i; - u8 vic_len; + int modes = 0, offset = 0, i, multi_present = 0; + u8 vic_len, hdmi_3d_len = 0; + u16 mask; + u16 structure_all; if (len < 8) goto out; @@ -2689,11 +2736,16 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) /* 3D_Present */ offset++; - if (db[8 + offset] & (1 << 7)) + if (db[8 + offset] & (1 << 7)) { modes += add_hdmi_mandatory_stereo_modes(connector); + /* 3D_Multi_present */ + multi_present = (db[8 + offset] & 0x60) >> 5; + } + offset++; vic_len = db[8 + offset] >> 5; + hdmi_3d_len = db[8 + offset] & 0x1f; for (i = 0; i < vic_len && len >= (9 + offset + i); i++) { u8 vic; @@ -2701,6 +2753,35 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) vic = db[9 + offset + i]; modes += add_hdmi_mode(connector, vic); } + offset += 1 + vic_len; + + if (!(multi_present == 1 || multi_present == 2)) + goto out; + + if ((multi_present == 1 && len < (9 + offset)) || + (multi_present == 2 && len < (11 + offset))) + goto out; + + if ((multi_present == 1 && hdmi_3d_len < 2) || + (multi_present == 2 && hdmi_3d_len < 4)) + goto out; + + /* 3D_Structure_ALL */ + structure_all = (db[8 + offset] << 8) | db[9 + offset]; + + /* check if 3D_MASK is present */ + if (multi_present == 2) + mask = (db[10 + offset] << 8) | db[11 + offset]; + else + mask = 0xffff; + + for (i = 0; i < 16; i++) { + if (mask & (1 << i)) + modes += add_3d_struct_modes(connector, + structure_all, + video_db, + video_len, i); + } out: return modes; @@ -2759,8 +2840,8 @@ static int add_cea_modes(struct drm_connector *connector, struct edid *edid) { const u8 *cea = drm_find_cea_extension(edid); - const u8 *db, *hdmi = NULL; - u8 dbl, hdmi_len; + const u8 *db, *hdmi = NULL, *video = NULL; + u8 dbl, hdmi_len, video_len = 0; int modes = 0; if (cea && cea_revision(cea) >= 3) { @@ -2773,8 +2854,11 @@ add_cea_modes(struct drm_connector *connector, struct edid *edid) db = &cea[i]; dbl = cea_db_payload_len(db); - if (cea_db_tag(db) == VIDEO_BLOCK) - modes += do_cea_modes(connector, db + 1, dbl); + if (cea_db_tag(db) == VIDEO_BLOCK) { + video = db + 1; + video_len = dbl; + modes += do_cea_modes(connector, video, dbl); + } else if (cea_db_is_hdmi_vsdb(db)) { hdmi = db; hdmi_len = dbl; @@ -2787,7 +2871,8 @@ add_cea_modes(struct drm_connector *connector, struct edid *edid) * be patching their flags when the sink supports stereo 3D. */ if (hdmi) - modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len); + modes += do_hdmi_vsdb_modes(connector, hdmi, hdmi_len, video, + video_len); return modes; }
Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor Specific Data Block to expose more stereo 3D modes. v2: Use (1 << 0) for consistency. (Ville Syrjälä) Skip adding any modes if 3D_MASK is indicated as being present but the length only includes 3D_Structure_ALL. (Ville Syrjälä) Check that the value of HDMI_3D_LEN is large enough to include 3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä) v3: Increment offset before the length checks. (Ville Syrjälä) Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- drivers/gpu/drm/drm_edid.c | 103 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 94 insertions(+), 9 deletions(-)