@@ -27,12 +27,36 @@
#ifndef _I915_DRM_H_
#define _I915_DRM_H_
-#include "drm.h"
+#include <drm.h>
/* Please note that modifications to all structs defined here are
* subject to backwards-compatibility constraints.
*/
+/**
+ * DOC: uevents generated by i915 on it's device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ * event from the gpu l3 cache. Additional information supplied is ROW,
+ * BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep
+ * track of these events and if a specific cache-line seems to have a
+ * persistent error remap it with the l3 remapping tool supplied in
+ * intel-gpu-tools. The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ * hangcheck. The error detection event is a good indicator of when things
+ * began to go badly. The value supplied with the event is a 1 upon error
+ * detection, and a 0 upon reset completion, signifying no more error
+ * exists. NOTE: Disabling hangcheck or reset via module parameter will
+ * cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ * the GPU. The value supplied with the event is always 1. NOTE: Disable
+ * reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT "L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT "ERROR"
+#define I915_RESET_UEVENT "RESET"
/* Each region is a minimum of 16k, and there are at most 255 of them.
*/
@@ -195,8 +219,8 @@ typedef struct _drm_i915_sarea {
#define DRM_I915_GEM_WAIT 0x2c
#define DRM_I915_GEM_CONTEXT_CREATE 0x2d
#define DRM_I915_GEM_CONTEXT_DESTROY 0x2e
-#define DRM_I915_GEM_SET_CACHEING 0x2f
-#define DRM_I915_GEM_GET_CACHEING 0x30
+#define DRM_I915_GEM_SET_CACHING 0x2f
+#define DRM_I915_GEM_GET_CACHING 0x30
#define DRM_I915_REG_READ 0x31
#define DRM_I915_GET_RESET_STATS 0x32
@@ -223,8 +247,8 @@ typedef struct _drm_i915_sarea {
#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
-#define DRM_IOCTL_I915_GEM_SET_CACHEING DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHEING, struct drm_i915_gem_cacheing)
-#define DRM_IOCTL_I915_GEM_GET_CACHEING DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHEING, struct drm_i915_gem_cacheing)
+#define DRM_IOCTL_I915_GEM_SET_CACHING DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_GET_CACHING DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching)
#define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
@@ -305,7 +329,14 @@ typedef struct drm_i915_irq_wait {
#define I915_PARAM_HAS_LLC 17
#define I915_PARAM_HAS_ALIASING_PPGTT 18
#define I915_PARAM_HAS_WAIT_TIMEOUT 19
-#define I915_PARAM_HAS_VEBOX 22
+#define I915_PARAM_HAS_SEMAPHORES 20
+#define I915_PARAM_HAS_PRIME_VMAP_FLUSH 21
+#define I915_PARAM_HAS_VEBOX 22
+#define I915_PARAM_HAS_SECURE_BATCHES 23
+#define I915_PARAM_HAS_PINNED_BATCHES 24
+#define I915_PARAM_HAS_EXEC_NO_RELOC 25
+#define I915_PARAM_HAS_EXEC_HANDLE_LUT 26
+#define I915_PARAM_HAS_WT 27
typedef struct drm_i915_getparam {
int param;
@@ -626,7 +657,11 @@ struct drm_i915_gem_exec_object2 {
__u64 offset;
#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+#define EXEC_OBJECT_NEEDS_GTT (1<<1)
+#define EXEC_OBJECT_WRITE (1<<2)
+#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_WRITE<<1)
__u64 flags;
+
__u64 rsvd1;
__u64 rsvd2;
};
@@ -672,6 +707,34 @@ struct drm_i915_gem_execbuffer2 {
/** Resets the SO write offset registers for transform feedback on gen7. */
#define I915_EXEC_GEN7_SOL_RESET (1<<8)
+/** Request a privileged ("secure") batch buffer. Note only available for
+ * DRM_ROOT_ONLY | DRM_MASTER processes.
+ */
+#define I915_EXEC_SECURE (1<<9)
+
+/** Inform the kernel that the batch is and will always be pinned. This
+ * negates the requirement for a workaround to be performed to avoid
+ * an incoherent CS (such as can be found on 830/845). If this flag is
+ * not passed, the kernel will endeavour to make sure the batch is
+ * coherent with the CS before execution. If this flag is passed,
+ * userspace assumes the responsibility for ensuring the same.
+ */
+#define I915_EXEC_IS_PINNED (1<<10)
+
+/** Provide a hint to the kernel that the command stream and auxilliary
+ * state buffers already holds the correct presumed addresses and so the
+ * relocation process may be skipped if no buffers need to be moved in
+ * preparation for the execbuffer.
+ */
+#define I915_EXEC_NO_RELOC (1<<11)
+
+/** Use the reloc.handle as an index into the exec object array rather
+ * than as the per-file handle.
+ */
+#define I915_EXEC_HANDLE_LUT (1<<12)
+
+#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_HANDLE_LUT<<1)
+
#define I915_EXEC_CONTEXT_ID_MASK (0xffffffff)
#define i915_execbuffer2_set_context_id(eb2, context) \
(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK
@@ -708,21 +771,45 @@ struct drm_i915_gem_busy {
__u32 busy;
};
-#define I915_CACHEING_NONE 0
-#define I915_CACHEING_CACHED 1
+/**
+ * I915_CACHING_NONE
+ *
+ * GPU access is not coherent with cpu caches. Default for machines without an
+ * LLC.
+ */
+#define I915_CACHING_NONE 0
+/**
+ * I915_CACHING_CACHED
+ *
+ * GPU access is coherent with cpu caches and furthermore the data is cached in
+ * last-level caches shared between cpu cores and the gpu GT. Default on
+ * machines with HAS_LLC.
+ */
+#define I915_CACHING_CACHED 1
+/**
+ * I915_CACHING_DISPLAY
+ *
+ * Special GPU caching mode which is coherent with the scanout engines.
+ * Transparently falls back to I915_CACHING_NONE on platforms where no special
+ * cache mode (like write-through or gfdt flushing) is available. The kernel
+ * automatically sets this mode when using a buffer as a scanout target.
+ * Userspace can manually set this mode to avoid a costly stall and clflush in
+ * the hotpath of drawing the first frame.
+ */
+#define I915_CACHING_DISPLAY 2
-struct drm_i915_gem_cacheing {
+struct drm_i915_gem_caching {
/**
- * Handle of the buffer to set/get the cacheing level of. */
+ * Handle of the buffer to set/get the caching level of. */
__u32 handle;
/**
* Cacheing level to apply or return value
*
- * bits0-15 are for generic cacheing control (i.e. the above defined
+ * bits0-15 are for generic caching control (i.e. the above defined
* values). bits16-31 are reserved for platform-specific variations
* (e.g. l3$ caching on gen7). */
- __u32 cacheing;
+ __u32 caching;
};
#define I915_TILING_NONE 0
@@ -962,4 +1049,4 @@ struct drm_i915_reset_stats {
__u32 pad;
};
-#endif /* _I915_DRM_H_ */
+#endif /* _I915_DRM_H_ */
This was not done as a straight copy because reset_stats IOCTL landed in libdrm before upstream kernel. (We'll do a similar thing for full PPGTT anyway, so there isn't really a point in syncing exactly). Signed-off-by: Ben Widawsky <ben@bwidawsk.net> --- include/drm/i915_drm.h | 113 +++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 100 insertions(+), 13 deletions(-)