@@ -178,6 +178,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dtb \
+ imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dtb \
+ imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dtb \
imx53-ard.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
new file mode 100644
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx51-eukrea-mbimxsd51-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD51 with the CMO-QVGA Display";
+ compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
+
+ panel: panel {
+ compatible = "eukrea,mbimxsd51-cmo-qvga", "simple-panel";
+ power-supply = <®_lcd_3v3>;
+ };
+
+ reg_lcd_3v3: lcd-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&display {
+ status = "okay";
+ fsl,panel = <&panel>;
+};
new file mode 100644
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx51-eukrea-mbimxsd51-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD51 with the DVI-SVGA Display";
+ compatible = "eukrea,mbimxsd51-baseboard-dvi-svga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
+
+ panel: panel {
+ compatible = "eukrea,mbimxsd51-dvi-svga", "simple-panel";
+ };
+};
+
+&display {
+ status = "okay";
+ fsl,panel = <&panel>;
+};
new file mode 100644
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx51-eukrea-mbimxsd51-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD51 with the DVI-VGA Display";
+ compatible = "eukrea,mbimxsd51-baseboard-dvi-vga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
+
+ panel: panel {
+ compatible = "eukrea,mbimxsd51-dvi-vga", "simple-panel";
+ };
+};
+
+&display {
+ status = "okay";
+ fsl,panel = <&panel>;
+};
@@ -24,6 +24,20 @@
model = "Eukrea CPUIMX51";
compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
+ status = "disabled";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -146,6 +160,37 @@
>;
};
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
+ };
+
pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
fsl,pins = <
MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
@@ -154,6 +199,10 @@
};
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
&ssi2 {
codec-handle = <&tlv320aic23>;
fsl,mode = "i2s-slave";
The CMO-QVGA, DVI-SVGA and DVI-VGA are added. Signed-off-by: Denis Carikli <denis@eukrea.com> --- ChangeLog v10->v11: - Now uses the drm-panel instead of the display-timings. This is to get regulator support, which is lacking in the imx-drm driver when using the display-timings. ChangeLog v9->v10: - Rebased - Now enables the cmo-qvga regulator at boot. ChangeLog v8->v9: - Removed the Cc. They are now set in git-send-email directly. - updated pixelclk-active after the following patch: "imx-drm: Match ipu_di_signal_cfg's clk_pol with its description." ChangeLog v7->v8: - Rebased the patch: added the now required imx-drm node. - Adapted the svga clock-frequency value in order to still be able to display an image after the following commit: "imx-drm: ipu-v3: more inteligent DI clock selection" ChangeLog v6->v7: - Shrinked even more the Cc list. - Since the pingrp headers were removed, the references to it where replaced by the actual pins. - Added the targets to arch/arm/boot/dts/Makefile ChangeLog v5->v6: - Reordered the Cc list. ChangeLog v3->v5: - Updated to new GPIO defines. - Updated to new licenses checkpatch requirements. - one whitespace cleanup. ChangeLog v2->v3: - Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards. - This patch now only adds display support. - Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem. - rebased and reworked the dts displays addition. - Also rebased and reworked the fsl,pins usage. --- arch/arm/boot/dts/Makefile | 3 ++ .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts | 41 ++++++++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts | 28 +++++++++++ .../imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts | 28 +++++++++++ .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts | 49 ++++++++++++++++++++ 5 files changed, 149 insertions(+) create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts