diff mbox

[3/5] ARM: tegra: add GK20A GPU to Tegra124 DT

Message ID 1400491450-19223-4-git-send-email-acourbot@nvidia.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alexandre Courbot May 19, 2014, 9:24 a.m. UTC 
From: Thierry Reding <treding@nvidia.com>

Add the GK20A device node to Tegra124's device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Stephen Warren May 19, 2014, 9:16 p.m. UTC | #1 
On 05/19/2014 03:24 AM, Alexandre Courbot wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Add the GK20A device node to Tegra124's device tree.

At a quick glance, patches 3-5 look fine too. I'll hold off on applying
them until patches 1-2 have been applied to the DRM/... tree.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 6e6bc4e8185c..0bccd6af81d6 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -102,6 +102,21 @@ 
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	gpu@0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pll";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
 	timer@0,60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;