@@ -32,6 +32,11 @@ Required properties:
- port: A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+Optional properties in encoder nodes:
+- rockchip,rgb-bridge: if a separate controller is regulating access
+ to the rgb output interface it should be referenced
+ in the encoder node.
+
Example:
SoC specific DT entry:
vopb: vopb@ff930000 {
@@ -56,3 +61,14 @@ SoC specific DT entry:
};
};
};
+
+Additional entries when a rgb-bridge is used:
+
+ lvds: lvds@ff96c000 {
+ ...
+ };
+
+ external-encoder {
+ ...
+ rockchip,rgb-bridge = <&lvds>;
+ };
@@ -130,6 +130,7 @@ static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
struct dma_iommu_mapping *mapping;
struct device *dev = drm_dev->dev;
struct drm_connector *connector;
+ struct drm_encoder *encoder;
int ret;
private = devm_kzalloc(drm_dev->dev, sizeof(*private), GFP_KERNEL);
@@ -173,6 +174,37 @@ static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
goto err_detach_device;
/*
+ * Attach rgb bridge to encoders needing it.
+ */
+ list_for_each_entry(encoder, &drm_dev->mode_config.encoder_list, head) {
+ struct device_node *rgb_node;
+
+ if (!encoder->of_node)
+ continue;
+
+ rgb_node = of_parse_phandle(encoder->of_node,
+ "rockchip,rgb-bridge", 0);
+ if (rgb_node) {
+ struct drm_bridge *bridge;
+
+ bridge = of_drm_find_bridge(rgb_node);
+ of_node_put(rgb_node);
+ if (!bridge) {
+ ret = -EPROBE_DEFER;
+ goto err_unbind;
+ }
+
+ encoder->bridge = bridge;
+ bridge->encoder = encoder;
+ ret = drm_bridge_attach(encoder->dev, bridge);
+ if (ret) {
+ DRM_ERROR("Failed to attach bridge to drm\n");
+ goto err_unbind;
+ }
+ }
+ }
+
+ /*
* All components are now added, we can publish the connector sysfs
* entries to userspace. This will generate hotplug events and so
* userspace will expect to be able to access DRM at this point.
On SoCs like the rk3288 the lvds controller needs to be configured even for just providing rgb data to an attached encoder. As internals of the rockchip drm driver should not leak into the implementation of generic i2c encoders etc, go through the list of encoders and attach any necessary rgb bridges when building the drm device in the load callback. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- .../devicetree/bindings/video/rockchip-vop.txt | 16 +++++++++++ drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 32 ++++++++++++++++++++++ 2 files changed, 48 insertions(+)