@@ -160,7 +160,7 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file)
if (mdp5_crtc->ctl && !crtc->state->enable) {
/* set STAGE_UNUSED for all layers */
- mdp5_ctl_blend(mdp5_crtc->ctl, mdp5_crtc->lm, 0x00000000);
+ mdp5_ctl_blend(mdp5_crtc->ctl, mdp5_crtc->lm, NULL, 0, 0);
mdp5_ctl_release(mdp5_crtc->ctl);
mdp5_crtc->ctl = NULL;
}
@@ -196,13 +196,9 @@ static bool mdp5_crtc_mode_fixup(struct drm_crtc *crtc,
/*
* blend_setup() - blend all the planes of a CRTC
*
- * When border is enabled, the border color will ALWAYS be the base layer.
- * Therefore, the first plane (private RGB pipe) will start at STAGE0.
- * If disabled, the first plane starts at STAGE_BASE.
- *
- * Note:
- * Border is not enabled here because the private plane is exactly
- * the CRTC resolution.
+ * If no base layer is available, border will be enabled as the base layer.
+ * Otherwise all layers will be blended based on their stage calculated
+ * in mdp5_crtc_atomic_check.
*/
static void blend_setup(struct drm_crtc *crtc)
{
@@ -210,9 +206,14 @@ static void blend_setup(struct drm_crtc *crtc)
struct mdp5_kms *mdp5_kms = get_kms(crtc);
struct drm_plane *plane;
const struct mdp5_cfg_hw *hw_cfg;
- uint32_t lm = mdp5_crtc->lm, blend_cfg = 0;
+ struct mdp5_plane_state *pstate, *pstates[STAGE_MAX + 1] = {NULL};
+ const struct mdp_format *format;
+ uint32_t lm = mdp5_crtc->lm;
+ uint32_t blend_op, fg_alpha, bg_alpha, ctl_blend_flags = 0;
unsigned long flags;
-#define blender(stage) ((stage) - STAGE_BASE)
+ uint8_t stage[STAGE_MAX + 1];
+ int i, plane_cnt = 0;
+#define blender(stage) ((stage) - STAGE0)
hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
@@ -222,33 +223,73 @@ static void blend_setup(struct drm_crtc *crtc)
if (!mdp5_crtc->ctl)
goto out;
+ /* Collect all plane information */
drm_atomic_crtc_for_each_plane(plane, crtc) {
- enum mdp_mixer_stage_id stage =
- to_mdp5_plane_state(plane->state)->stage;
+ pstate = to_mdp5_plane_state(plane->state);
+ pstates[pstate->stage] = pstate;
+ stage[pstate->stage] = mdp5_plane_pipe(plane);
+ plane_cnt++;
+ }
- /*
- * Note: This cannot happen with current implementation but
- * we need to check this condition once z property is added
- */
- BUG_ON(stage > hw_cfg->lm.nb_stages);
+ /*
+ * If there is no base layer, enable border color.
+ * Although it's not possbile in current blend logic,
+ * put it here as a reminder.
+ */
+ if (!pstates[STAGE_BASE] && plane_cnt) {
+ ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT;
+ DBG("Border Color is enabled");
+ }
- /* LM */
- mdp5_write(mdp5_kms,
- REG_MDP5_LM_BLEND_OP_MODE(lm, blender(stage)),
- MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) |
- MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST));
+ /* The reset for blending */
+ for (i = STAGE0; i <= STAGE_MAX; i++) {
+ if (!pstates[i])
+ continue;
+
+ format = to_mdp_format(
+ msm_framebuffer_format(pstates[i]->base.fb));
+ plane = pstates[i]->base.plane;
+ blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) |
+ MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST);
+ fg_alpha = pstates[i]->alpha;
+ bg_alpha = 0xFF - pstates[i]->alpha;
+ DBG("Stage %d fg_alpha %x bg_alpha %x", i, fg_alpha, bg_alpha);
+
+ if (format->alpha_enable && pstates[i]->premultiplied) {
+ blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) |
+ MDP5_LM_BLEND_OP_MODE_BG_ALPHA(FG_PIXEL);
+ if (fg_alpha != 0xff) {
+ bg_alpha = fg_alpha;
+ blend_op |=
+ MDP5_LM_BLEND_OP_MODE_BG_MOD_ALPHA |
+ MDP5_LM_BLEND_OP_MODE_BG_INV_MOD_ALPHA;
+ } else {
+ blend_op |= MDP5_LM_BLEND_OP_MODE_BG_INV_ALPHA;
+ }
+ } else if (format->alpha_enable) {
+ blend_op = MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_PIXEL) |
+ MDP5_LM_BLEND_OP_MODE_BG_ALPHA(FG_PIXEL);
+ if (fg_alpha != 0xff) {
+ bg_alpha = fg_alpha;
+ blend_op |=
+ MDP5_LM_BLEND_OP_MODE_FG_MOD_ALPHA |
+ MDP5_LM_BLEND_OP_MODE_FG_INV_MOD_ALPHA |
+ MDP5_LM_BLEND_OP_MODE_BG_MOD_ALPHA |
+ MDP5_LM_BLEND_OP_MODE_BG_INV_MOD_ALPHA;
+ } else {
+ blend_op |= MDP5_LM_BLEND_OP_MODE_BG_INV_ALPHA;
+ }
+ }
+
+ mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_OP_MODE(lm,
+ blender(i)), blend_op);
mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_FG_ALPHA(lm,
- blender(stage)), 0xff);
+ blender(i)), fg_alpha);
mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_BG_ALPHA(lm,
- blender(stage)), 0x00);
- /* CTL */
- blend_cfg |= mdp_ctl_blend_mask(mdp5_plane_pipe(plane), stage);
- DBG("%s: blending pipe %s on stage=%d", mdp5_crtc->name,
- pipe2name(mdp5_plane_pipe(plane)), stage);
+ blender(i)), bg_alpha);
}
- DBG("%s: lm%d: blend config = 0x%08x", mdp5_crtc->name, lm, blend_cfg);
- mdp5_ctl_blend(mdp5_crtc->ctl, lm, blend_cfg);
+ mdp5_ctl_blend(mdp5_crtc->ctl, lm, stage, plane_cnt, ctl_blend_flags);
out:
spin_unlock_irqrestore(&mdp5_crtc->lm_lock, flags);
@@ -339,7 +380,8 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
struct mdp5_kms *mdp5_kms = get_kms(crtc);
struct drm_plane *plane;
struct drm_device *dev = crtc->dev;
- struct plane_state pstates[STAGE3 + 1];
+ struct plane_state pstates[STAGE_MAX + 1];
+ const struct mdp5_cfg_hw *hw_cfg;
int cnt = 0, i;
DBG("%s: check", mdp5_crtc->name);
@@ -354,10 +396,10 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
/* verify that there are not too many planes attached to crtc
* and that we don't have conflicting mixer stages:
*/
+ hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
drm_atomic_crtc_state_for_each_plane(plane, state) {
struct drm_plane_state *pstate;
-
- if (cnt >= ARRAY_SIZE(pstates)) {
+ if (cnt >= (hw_cfg->lm.nb_stages)) {
dev_err(dev->dev, "too many planes!\n");
return -EINVAL;
}
@@ -369,13 +411,13 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
*/
if (!pstate)
pstate = plane->state;
-
pstates[cnt].plane = plane;
pstates[cnt].state = to_mdp5_plane_state(pstate);
cnt++;
}
+ /* assign a stage based on sorted zpos property */
sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL);
for (i = 0; i < cnt; i++) {
@@ -287,30 +287,86 @@ int mdp5_ctl_set_cursor(struct mdp5_ctl *ctl, int cursor_id, bool enable)
blend_cfg &= ~MDP5_CTL_LAYER_REG_CURSOR_OUT;
ctl_write(ctl, REG_MDP5_CTL_LAYER_REG(ctl->id, lm), blend_cfg);
+ ctl->cursor_on = enable;
spin_unlock_irqrestore(&ctl->hw_lock, flags);
ctl->pending_ctl_trigger = mdp_ctl_flush_mask_cursor(cursor_id);
- ctl->cursor_on = enable;
return 0;
}
-int mdp5_ctl_blend(struct mdp5_ctl *ctl, u32 lm, u32 blend_cfg)
+static u32 mdp_ctl_blend_mask(enum mdp5_pipe pipe,
+ enum mdp_mixer_stage_id stage)
+{
+ switch (pipe) {
+ case SSPP_VIG0: return MDP5_CTL_LAYER_REG_VIG0(stage);
+ case SSPP_VIG1: return MDP5_CTL_LAYER_REG_VIG1(stage);
+ case SSPP_VIG2: return MDP5_CTL_LAYER_REG_VIG2(stage);
+ case SSPP_RGB0: return MDP5_CTL_LAYER_REG_RGB0(stage);
+ case SSPP_RGB1: return MDP5_CTL_LAYER_REG_RGB1(stage);
+ case SSPP_RGB2: return MDP5_CTL_LAYER_REG_RGB2(stage);
+ case SSPP_DMA0: return MDP5_CTL_LAYER_REG_DMA0(stage);
+ case SSPP_DMA1: return MDP5_CTL_LAYER_REG_DMA1(stage);
+ case SSPP_VIG3: return MDP5_CTL_LAYER_REG_VIG3(stage);
+ case SSPP_RGB3: return MDP5_CTL_LAYER_REG_RGB3(stage);
+ default: return 0;
+ }
+}
+
+static u32 mdp_ctl_blend_ext_mask(enum mdp5_pipe pipe,
+ enum mdp_mixer_stage_id stage)
+{
+ if (stage < STAGE6)
+ return 0;
+
+ switch (pipe) {
+ case SSPP_VIG0: return MDP5_CTL_LAYER_EXT_REG_VIG0_BIT3;
+ case SSPP_VIG1: return MDP5_CTL_LAYER_EXT_REG_VIG1_BIT3;
+ case SSPP_VIG2: return MDP5_CTL_LAYER_EXT_REG_VIG2_BIT3;
+ case SSPP_RGB0: return MDP5_CTL_LAYER_EXT_REG_RGB0_BIT3;
+ case SSPP_RGB1: return MDP5_CTL_LAYER_EXT_REG_RGB1_BIT3;
+ case SSPP_RGB2: return MDP5_CTL_LAYER_EXT_REG_RGB2_BIT3;
+ case SSPP_DMA0: return MDP5_CTL_LAYER_EXT_REG_DMA0_BIT3;
+ case SSPP_DMA1: return MDP5_CTL_LAYER_EXT_REG_DMA1_BIT3;
+ case SSPP_VIG3: return MDP5_CTL_LAYER_EXT_REG_VIG3_BIT3;
+ case SSPP_RGB3: return MDP5_CTL_LAYER_EXT_REG_RGB3_BIT3;
+ default: return 0;
+ }
+}
+
+int mdp5_ctl_blend(struct mdp5_ctl *ctl, u32 lm, u8 *stage, u32 stage_cnt,
+ u32 ctl_blend_op_flags)
{
unsigned long flags;
+ u32 blend_cfg = 0, blend_ext_cfg = 0;
+ int i, start_stage;
+
+ if (ctl_blend_op_flags & MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT) {
+ start_stage = STAGE0;
+ blend_cfg |= MDP5_CTL_LAYER_REG_BORDER_COLOR;
+ } else {
+ start_stage = STAGE_BASE;
+ }
+
+ for (i = start_stage; i < start_stage + stage_cnt; i++) {
+ blend_cfg |= mdp_ctl_blend_mask(stage[i], i);
+ blend_ext_cfg |= mdp_ctl_blend_ext_mask(stage[i], i);
+ }
+ spin_lock_irqsave(&ctl->hw_lock, flags);
if (ctl->cursor_on)
blend_cfg |= MDP5_CTL_LAYER_REG_CURSOR_OUT;
- else
- blend_cfg &= ~MDP5_CTL_LAYER_REG_CURSOR_OUT;
- spin_lock_irqsave(&ctl->hw_lock, flags);
ctl_write(ctl, REG_MDP5_CTL_LAYER_REG(ctl->id, lm), blend_cfg);
+ ctl_write(ctl, REG_MDP5_CTL_LAYER_EXT_REG(ctl->id, lm), blend_ext_cfg);
spin_unlock_irqrestore(&ctl->hw_lock, flags);
ctl->pending_ctl_trigger = mdp_ctl_flush_mask_lm(lm);
+ DBG("lm%d: blend config = 0x%08x. ext_cfg = 0x%08x", lm,
+ blend_cfg, blend_ext_cfg);
+
return 0;
}
@@ -42,39 +42,19 @@ int mdp5_ctl_set_encoder_state(struct mdp5_ctl *ctl, bool enabled);
int mdp5_ctl_set_cursor(struct mdp5_ctl *ctl, int cursor_id, bool enable);
/*
- * blend_cfg (LM blender config):
- *
- * The function below allows the caller of mdp5_ctl_blend() to specify how pipes
- * are being blended according to their stage (z-order), through @blend_cfg arg.
- */
-static inline u32 mdp_ctl_blend_mask(enum mdp5_pipe pipe,
- enum mdp_mixer_stage_id stage)
-{
- switch (pipe) {
- case SSPP_VIG0: return MDP5_CTL_LAYER_REG_VIG0(stage);
- case SSPP_VIG1: return MDP5_CTL_LAYER_REG_VIG1(stage);
- case SSPP_VIG2: return MDP5_CTL_LAYER_REG_VIG2(stage);
- case SSPP_RGB0: return MDP5_CTL_LAYER_REG_RGB0(stage);
- case SSPP_RGB1: return MDP5_CTL_LAYER_REG_RGB1(stage);
- case SSPP_RGB2: return MDP5_CTL_LAYER_REG_RGB2(stage);
- case SSPP_DMA0: return MDP5_CTL_LAYER_REG_DMA0(stage);
- case SSPP_DMA1: return MDP5_CTL_LAYER_REG_DMA1(stage);
- case SSPP_VIG3: return MDP5_CTL_LAYER_REG_VIG3(stage);
- case SSPP_RGB3: return MDP5_CTL_LAYER_REG_RGB3(stage);
- default: return 0;
- }
-}
-
-/*
* mdp5_ctl_blend() - Blend multiple layers on a Layer Mixer (LM)
*
- * @blend_cfg: see LM blender config definition below
+ * @stage: array to contain the pipe num for each stage
+ * @stage_cnt: valid stage number in stage array
+ * @ctl_blend_op_flags: blender operation mode flags
*
* Note:
* CTL registers need to be flushed after calling this function
* (call mdp5_ctl_commit() with mdp_ctl_flush_mask_ctl() mask)
*/
-int mdp5_ctl_blend(struct mdp5_ctl *ctl, u32 lm, u32 blend_cfg);
+#define MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT BIT(0)
+int mdp5_ctl_blend(struct mdp5_ctl *ctl, u32 lm, u8 *stage, u32 stage_cnt,
+ u32 ctl_blend_op_flags);
/**
* mdp_ctl_flush_mask...() - Register FLUSH masks
@@ -70,18 +70,12 @@ struct mdp5_kms {
struct mdp5_plane_state {
struct drm_plane_state base;
- /* "virtual" zpos.. we calculate actual mixer-stage at runtime
- * by sorting the attached planes by zpos and then assigning
- * mixer stage lowest to highest. Private planes get default
- * zpos of zero, and public planes a unique value that is
- * greater than zero. This way, things work out if a naive
- * userspace assigns planes to a crtc without setting zpos.
- */
- int zpos;
+ /* aligned with property */
+ uint8_t premultiplied;
+ uint8_t zpos;
+ uint8_t alpha;
- /* the actual mixer stage, calculated in crtc->atomic_check()
- * NOTE: this should move to mdp5_crtc_state, when that exists
- */
+ /* assigned by crtc blender */
enum mdp_mixer_stage_id stage;
/* some additional transactional status to help us know in the
@@ -86,14 +86,97 @@ static void mdp5_plane_destroy(struct drm_plane *plane)
void mdp5_plane_install_properties(struct drm_plane *plane,
struct drm_mode_object *obj)
{
- // XXX
+ struct drm_device *dev = plane->dev;
+ struct msm_drm_private *dev_priv = dev->dev_private;
+ struct drm_property *prop;
+
+#define INSTALL_PROPERTY(name, NAME, min, max, init_val) do { \
+ prop = dev_priv->plane_property[PLANE_PROP_##NAME]; \
+ if (!prop) { \
+ prop = drm_property_create_range(dev, 0, #name, \
+ min, max); \
+ if (!prop) { \
+ dev_warn(dev->dev, \
+ "Create property %s failed\n", \
+ #name); \
+ return; \
+ } \
+ dev_priv->plane_property[PLANE_PROP_##NAME] = prop; \
+ } \
+ drm_object_attach_property(&plane->base, prop, init_val); \
+ } while (0)
+
+ INSTALL_PROPERTY(zpos, ZPOS, 1, 255, 1);
+ INSTALL_PROPERTY(alpha, ALPHA, 0, 255, 255);
+ INSTALL_PROPERTY(premultiplied, PREMULTIPLIED, 0, 1, 0);
+#undef INSTALL_PROPERTY
}
-int mdp5_plane_set_property(struct drm_plane *plane,
+static int mdp5_plane_atomic_set_property(struct drm_plane *plane,
+ struct drm_plane_state *state, struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = plane->dev;
+ struct mdp5_plane_state *pstate;
+ struct msm_drm_private *dev_priv = dev->dev_private;
+ int ret = 0;
+
+ pstate = to_mdp5_plane_state(state);
+
+#define SET_PROPERTY(name, NAME, type) do { \
+ if (dev_priv->plane_property[PLANE_PROP_##NAME] == property) { \
+ pstate->name = (type)val; \
+ DBG("Set property %s %d", #name, (type)val); \
+ goto done; \
+ } \
+ } while (0)
+
+ SET_PROPERTY(zpos, ZPOS, uint8_t);
+ SET_PROPERTY(alpha, ALPHA, uint8_t);
+ SET_PROPERTY(premultiplied, PREMULTIPLIED, uint8_t);
+
+ dev_err(dev->dev, "Invalid property\n");
+ ret = -EINVAL;
+done:
+ return ret;
+#undef SET_PROPERTY
+}
+
+static int mdp5_plane_set_property(struct drm_plane *plane,
struct drm_property *property, uint64_t val)
{
- // XXX
- return -EINVAL;
+ return mdp5_plane_atomic_set_property(plane, plane->state, property,
+ val);
+}
+
+static int mdp5_plane_atomic_get_property(struct drm_plane *plane,
+ const struct drm_plane_state *state,
+ struct drm_property *property, uint64_t *val)
+{
+ struct drm_device *dev = plane->dev;
+ struct mdp5_plane_state *pstate;
+ struct msm_drm_private *dev_priv = dev->dev_private;
+ int ret = 0;
+
+ pstate = to_mdp5_plane_state(state);
+
+#define GET_PROPERTY(name, NAME, type) do { \
+ if (dev_priv->plane_property[PLANE_PROP_##NAME] == property) { \
+ *val = pstate->name; \
+ DBG("Get property %s %lld", #name, *val); \
+ goto done; \
+ } \
+ } while (0)
+
+ GET_PROPERTY(zpos, ZPOS, uint8_t);
+ GET_PROPERTY(alpha, ALPHA, uint8_t);
+ GET_PROPERTY(premultiplied, PREMULTIPLIED, uint8_t);
+
+ dev_err(dev->dev, "Invalid property\n");
+ ret = -EINVAL;
+done:
+ return ret;
+#undef SET_PROPERTY
}
static void mdp5_plane_reset(struct drm_plane *plane)
@@ -106,11 +189,15 @@ static void mdp5_plane_reset(struct drm_plane *plane)
kfree(to_mdp5_plane_state(plane->state));
mdp5_state = kzalloc(sizeof(*mdp5_state), GFP_KERNEL);
- if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
- mdp5_state->zpos = 0;
- } else {
- mdp5_state->zpos = 1 + drm_plane_index(plane);
- }
+ /* assign default blend parameters */
+ mdp5_state->alpha = 255;
+ mdp5_state->premultiplied = 0;
+
+ if (plane->type == DRM_PLANE_TYPE_PRIMARY)
+ mdp5_state->zpos = STAGE_BASE;
+ else
+ mdp5_state->zpos = STAGE0 + drm_plane_index(plane);
+
mdp5_state->base.plane = plane;
plane->state = &mdp5_state->base;
@@ -150,6 +237,8 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = mdp5_plane_destroy,
.set_property = mdp5_plane_set_property,
+ .atomic_set_property = mdp5_plane_atomic_set_property,
+ .atomic_get_property = mdp5_plane_atomic_get_property,
.reset = mdp5_plane_reset,
.atomic_duplicate_state = mdp5_plane_duplicate_state,
.atomic_destroy_state = mdp5_plane_destroy_state,
@@ -64,6 +64,13 @@ struct msm_file_private {
int dummy;
};
+enum msm_mdp_plane_property {
+ PLANE_PROP_ZPOS,
+ PLANE_PROP_ALPHA,
+ PLANE_PROP_PREMULTIPLIED,
+ PLANE_PROP_MAX_NUM
+};
+
struct msm_drm_private {
struct msm_kms *kms;
@@ -128,6 +135,9 @@ struct msm_drm_private {
unsigned int num_connectors;
struct drm_connector *connectors[8];
+ /* Properties */
+ struct drm_property *plane_property[PLANE_PROP_MAX_NUM];
+
/* VRAM carveout, used when no IOMMU: */
struct {
unsigned long size;
This change is to add properties alpha/zpos/premultiplied to mdp5 plane for alpha blending operation to generate the blended output. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 110 +++++++++++++++++++++--------- drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.c | 66 ++++++++++++++++-- drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.h | 32 ++------- drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h | 16 ++--- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 107 ++++++++++++++++++++++++++--- drivers/gpu/drm/msm/msm_drv.h | 10 +++ 6 files changed, 256 insertions(+), 85 deletions(-)