| Message ID | 1446244470-8517-1-git-send-email-bjorn.andersson@sonymobile.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On Fri, Oct 30, 2015 at 5:34 PM, Bjorn Andersson <bjorn.andersson@sonymobile.com> wrote: > From: Werner Johansson <werner.johansson@sonymobile.com> > > Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com> > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Rob Herring <robh@kernel.org> > --- > > Change since v1: > - Dropped -vid suffix from compatible > > .../bindings/display/panel/sharp,ls043t1le01.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt > new file mode 100644 > index 000000000000..b3d4e073930a > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt > @@ -0,0 +1,22 @@ > +Sharp Microelectronics 4.3" qHD TFT LCD panel > + > +Required properties: > +- compatible: should be "sharp,ls043t1le01-qhd" > +- reg: DSI virtual channel of the peripheral > +- power-supply: phandle of the regulator that provides the supply voltage > + > +Optional properties: > +- backlight: phandle of the backlight device attached to the panel > +- reset-gpios: a GPIO spec for the reset pin > + > +Example: > + > + mdss_dsi@fd922800 { > + panel@0 { > + compatible = "sharp,ls043t1le01-qhd"; > + reg = <0>; > + avdd-supply = <&pm8941_l22>; > + backlight = <&pm8941_wled>; > + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; > + }; > + }; > -- > 2.4.2 >
On Fri, Oct 30, 2015 at 03:34:29PM -0700, Bjorn Andersson wrote: > From: Werner Johansson <werner.johansson@sonymobile.com> > > Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com> > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> > --- > > Change since v1: > - Dropped -vid suffix from compatible > > .../bindings/display/panel/sharp,ls043t1le01.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt Applied, thanks. Thierry
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt new file mode 100644 index 000000000000..b3d4e073930a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt @@ -0,0 +1,22 @@ +Sharp Microelectronics 4.3" qHD TFT LCD panel + +Required properties: +- compatible: should be "sharp,ls043t1le01-qhd" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: +- backlight: phandle of the backlight device attached to the panel +- reset-gpios: a GPIO spec for the reset pin + +Example: + + mdss_dsi@fd922800 { + panel@0 { + compatible = "sharp,ls043t1le01-qhd"; + reg = <0>; + avdd-supply = <&pm8941_l22>; + backlight = <&pm8941_wled>; + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>; + }; + };