diff mbox

[v1,5/5] ARM: dts: rockchip: add the panel power supply for rk3288-evb board with rk808 pmu

Message ID 1467089484-18756-1-git-send-email-ykk@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yakir Yang June 28, 2016, 4:51 a.m. UTC
Panel regulator is controller by a normal GPIO, so we need to
write a regulator-fixed node for it.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
 arch/arm/boot/dts/rk3288-evb-rk808.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Heiko Stübner July 7, 2016, 10:35 p.m. UTC | #1
Am Dienstag, 28. Juni 2016, 12:51:24 schrieb Yakir Yang:
> Panel regulator is controller by a normal GPIO, so we need to
> write a regulator-fixed node for it.
> 
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>

applied after rewording the commit message a bit.
On the rk808-evb vcc_lcd comes from the rk808 directly and not through some 
gpio regulator :-) .


Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 736b08b..44ebc6e 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -233,3 +233,7 @@ 
 		};
 	};
 };
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};