new file mode 100644
@@ -0,0 +1,35 @@
+* Rockchip rk3399 dmc device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dmc".
+- devfreq-events: Node to get ddr loading, Refer to
+ Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+- clocks: Phandles for clock specified in "clock-names" property
+- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
+- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
+ for details.
+- center-supply: Dmc supply node.
+- status: Marks the node enabled/disabled.
+
+Optional properties:
+- ddr_timing: ddr timing need to pass to arm trust firmware
+- upthreshold: the upthreshold to simpleondeamnd policy
+- downdifferential: The downdifferential to simpleondeamnd policy
+
+Example:
+ dmc: dmc {
+ compatible = "rockchip,rk3399-dmc";
+ devfreq-events = <&dfi>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DDRCLK>;
+ clock-names = "dmc_clk";
+ ddr_timing = <&ddr_timing>;
+ operating-points-v2 = <&dmc_opp_table>;
+ center-supply = <&ppvar_centerlogic>;
+ upthreshold = <15>;
+ downdifferential = <10>;
+ status = "disabled";
+ };
+
This patch adds the documentation for rockchip rk3399 dmc driver. Signed-off-by: Lin Huang <hl@rock-chips.com> --- Changes in v5: -None Changes in v4: -None Changes in v3: -None Changes in v2: -None Changes in v1: -None .../devicetree/bindings/devfreq/rk3399_dmc.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt