diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index d244e03658cc..449acc2517c7 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -110,6 +110,15 @@ Display Modes Function Reference
 .. kernel-doc:: drivers/gpu/drm/drm_modes.c
    :export:
 
+Connector Display Sink Abstraction
+==================================
+
+.. kernel-doc:: include/drm/drm_connector.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :export:
+
 KMS Initialization and Cleanup
 ==============================
 
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index c71ec42ce511..2eff1a33ab63 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -13,7 +13,7 @@ drm-y       :=	drm_auth.o drm_bufs.o drm_cache.o \
 		drm_trace_points.o drm_global.o drm_prime.o \
 		drm_rect.o drm_vma_manager.o drm_flip_work.o \
 		drm_modeset_lock.o drm_atomic.o drm_bridge.o \
-		drm_framebuffer.o
+		drm_framebuffer.o drm_connector.o
 
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
new file mode 100644
index 000000000000..99ece6758061
--- /dev/null
+++ b/drivers/gpu/drm/drm_connector.c
@@ -0,0 +1,1058 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+
+#include "drm_crtc_internal.h"
+#include "drm_internal.h"
+
+struct drm_conn_prop_enum_list {
+	int type;
+	const char *name;
+	struct ida ida;
+};
+
+/*
+ * Connector and encoder types.
+ */
+static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
+	{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
+	{ DRM_MODE_CONNECTOR_VGA, "VGA" },
+	{ DRM_MODE_CONNECTOR_DVII, "DVI-I" },
+	{ DRM_MODE_CONNECTOR_DVID, "DVI-D" },
+	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
+	{ DRM_MODE_CONNECTOR_Composite, "Composite" },
+	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
+	{ DRM_MODE_CONNECTOR_LVDS, "LVDS" },
+	{ DRM_MODE_CONNECTOR_Component, "Component" },
+	{ DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
+	{ DRM_MODE_CONNECTOR_DisplayPort, "DP" },
+	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
+	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
+	{ DRM_MODE_CONNECTOR_TV, "TV" },
+	{ DRM_MODE_CONNECTOR_eDP, "eDP" },
+	{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
+	{ DRM_MODE_CONNECTOR_DSI, "DSI" },
+	{ DRM_MODE_CONNECTOR_DPI, "DPI" },
+};
+
+void drm_connector_ida_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+		ida_init(&drm_connector_enum_list[i].ida);
+}
+
+void drm_connector_ida_destroy(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+		ida_destroy(&drm_connector_enum_list[i].ida);
+}
+
+/**
+ * drm_connector_get_cmdline_mode - reads the user's cmdline mode
+ * @connector: connector to quwery
+ *
+ * The kernel supports per-connector configration of its consoles through
+ * use of the video= parameter. This function parses that option and
+ * extracts the user's specified mode (or enable/disable status) for a
+ * particular connector. This is typically only used during the early fbdev
+ * setup.
+ */
+static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
+{
+	struct drm_cmdline_mode *mode = &connector->cmdline_mode;
+	char *option = NULL;
+
+	if (fb_get_options(connector->name, &option))
+		return;
+
+	if (!drm_mode_parse_command_line_for_connector(option,
+						       connector,
+						       mode))
+		return;
+
+	if (mode->force) {
+		const char *s;
+
+		switch (mode->force) {
+		case DRM_FORCE_OFF:
+			s = "OFF";
+			break;
+		case DRM_FORCE_ON_DIGITAL:
+			s = "ON - dig";
+			break;
+		default:
+		case DRM_FORCE_ON:
+			s = "ON";
+			break;
+		}
+
+		DRM_INFO("forcing %s connector %s\n", connector->name, s);
+		connector->force = mode->force;
+	}
+
+	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+		      connector->name,
+		      mode->xres, mode->yres,
+		      mode->refresh_specified ? mode->refresh : 60,
+		      mode->rb ? " reduced blanking" : "",
+		      mode->margins ? " with margins" : "",
+		      mode->interlace ?  " interlaced" : "");
+}
+
+static void drm_connector_free(struct kref *kref)
+{
+	struct drm_connector *connector =
+		container_of(kref, struct drm_connector, base.refcount);
+	struct drm_device *dev = connector->dev;
+
+	drm_mode_object_unregister(dev, &connector->base);
+	connector->funcs->destroy(connector);
+}
+
+/**
+ * drm_connector_init - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_init(struct drm_device *dev,
+		       struct drm_connector *connector,
+		       const struct drm_connector_funcs *funcs,
+		       int connector_type)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	int ret;
+	struct ida *connector_ida =
+		&drm_connector_enum_list[connector_type].ida;
+
+	drm_modeset_lock_all(dev);
+
+	ret = drm_mode_object_get_reg(dev, &connector->base,
+				      DRM_MODE_OBJECT_CONNECTOR,
+				      false, drm_connector_free);
+	if (ret)
+		goto out_unlock;
+
+	connector->base.properties = &connector->properties;
+	connector->dev = dev;
+	connector->funcs = funcs;
+
+	ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
+	if (ret < 0)
+		goto out_put;
+	connector->index = ret;
+	ret = 0;
+
+	connector->connector_type = connector_type;
+	connector->connector_type_id =
+		ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
+	if (connector->connector_type_id < 0) {
+		ret = connector->connector_type_id;
+		goto out_put_id;
+	}
+	connector->name =
+		kasprintf(GFP_KERNEL, "%s-%d",
+			  drm_connector_enum_list[connector_type].name,
+			  connector->connector_type_id);
+	if (!connector->name) {
+		ret = -ENOMEM;
+		goto out_put_type_id;
+	}
+
+	INIT_LIST_HEAD(&connector->probed_modes);
+	INIT_LIST_HEAD(&connector->modes);
+	connector->edid_blob_ptr = NULL;
+	connector->status = connector_status_unknown;
+
+	drm_connector_get_cmdline_mode(connector);
+
+	/* We should add connectors at the end to avoid upsetting the connector
+	 * index too much. */
+	list_add_tail(&connector->head, &config->connector_list);
+	config->num_connector++;
+
+	if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+		drm_object_attach_property(&connector->base,
+					      config->edid_property,
+					      0);
+
+	drm_object_attach_property(&connector->base,
+				      config->dpms_property, 0);
+
+	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
+	}
+
+	connector->debugfs_entry = NULL;
+out_put_type_id:
+	if (ret)
+		ida_remove(connector_ida, connector->connector_type_id);
+out_put_id:
+	if (ret)
+		ida_remove(&config->connector_ida, connector->index);
+out_put:
+	if (ret)
+		drm_mode_object_unregister(dev, &connector->base);
+
+out_unlock:
+	drm_modeset_unlock_all(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_init);
+
+/**
+ * drm_mode_connector_attach_encoder - attach a connector to an encoder
+ * @connector: connector to attach
+ * @encoder: encoder to attach @connector to
+ *
+ * This function links up a connector to an encoder. Note that the routing
+ * restrictions between encoders and crtcs are exposed to userspace through the
+ * possible_clones and possible_crtcs bitmasks.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+				      struct drm_encoder *encoder)
+{
+	int i;
+
+	/*
+	 * In the past, drivers have attempted to model the static association
+	 * of connector to encoder in simple connector/encoder devices using a
+	 * direct assignment of connector->encoder = encoder. This connection
+	 * is a logical one and the responsibility of the core, so drivers are
+	 * expected not to mess with this.
+	 *
+	 * Note that the error return should've been enough here, but a large
+	 * majority of drivers ignores the return value, so add in a big WARN
+	 * to get people's attention.
+	 */
+	if (WARN_ON(connector->encoder))
+		return -EINVAL;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == 0) {
+			connector->encoder_ids[i] = encoder->base.id;
+			return 0;
+		}
+	}
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
+
+static void drm_mode_remove(struct drm_connector *connector,
+			    struct drm_display_mode *mode)
+{
+	list_del(&mode->head);
+	drm_mode_destroy(connector->dev, mode);
+}
+
+/**
+ * drm_connector_cleanup - cleans up an initialised connector
+ * @connector: connector to cleanup
+ *
+ * Cleans up the connector but doesn't free the object.
+ */
+void drm_connector_cleanup(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+
+	/* The connector should have been removed from userspace long before
+	 * it is finally destroyed.
+	 */
+	if (WARN_ON(connector->registered))
+		drm_connector_unregister(connector);
+
+	if (connector->tile_group) {
+		drm_mode_put_tile_group(dev, connector->tile_group);
+		connector->tile_group = NULL;
+	}
+
+	list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		drm_mode_remove(connector, mode);
+
+	ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
+		   connector->connector_type_id);
+
+	ida_remove(&dev->mode_config.connector_ida,
+		   connector->index);
+
+	kfree(connector->display_info.bus_formats);
+	drm_mode_object_unregister(dev, &connector->base);
+	kfree(connector->name);
+	connector->name = NULL;
+	list_del(&connector->head);
+	dev->mode_config.num_connector--;
+
+	WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
+	if (connector->state && connector->funcs->atomic_destroy_state)
+		connector->funcs->atomic_destroy_state(connector,
+						       connector->state);
+
+	memset(connector, 0, sizeof(*connector));
+}
+EXPORT_SYMBOL(drm_connector_cleanup);
+
+/**
+ * drm_connector_register - register a connector
+ * @connector: the connector to register
+ *
+ * Register userspace interfaces for a connector
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_register(struct drm_connector *connector)
+{
+	int ret;
+
+	if (connector->registered)
+		return 0;
+
+	ret = drm_sysfs_connector_add(connector);
+	if (ret)
+		return ret;
+
+	ret = drm_debugfs_connector_add(connector);
+	if (ret) {
+		goto err_sysfs;
+	}
+
+	if (connector->funcs->late_register) {
+		ret = connector->funcs->late_register(connector);
+		if (ret)
+			goto err_debugfs;
+	}
+
+	drm_mode_object_register(connector->dev, &connector->base);
+
+	connector->registered = true;
+	return 0;
+
+err_debugfs:
+	drm_debugfs_connector_remove(connector);
+err_sysfs:
+	drm_sysfs_connector_remove(connector);
+	return ret;
+}
+EXPORT_SYMBOL(drm_connector_register);
+
+/**
+ * drm_connector_unregister - unregister a connector
+ * @connector: the connector to unregister
+ *
+ * Unregister userspace interfaces for a connector
+ */
+void drm_connector_unregister(struct drm_connector *connector)
+{
+	if (!connector->registered)
+		return;
+
+	if (connector->funcs->early_unregister)
+		connector->funcs->early_unregister(connector);
+
+	drm_sysfs_connector_remove(connector);
+	drm_debugfs_connector_remove(connector);
+
+	connector->registered = false;
+}
+EXPORT_SYMBOL(drm_connector_unregister);
+
+void drm_connector_unregister_all(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+
+	/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		drm_connector_unregister(connector);
+}
+
+int drm_connector_register_all(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	int ret;
+
+	/* FIXME: taking the mode config mutex ends up in a clash with
+	 * fbcon/backlight registration */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		ret = drm_connector_register(connector);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	mutex_unlock(&dev->mode_config.mutex);
+	drm_connector_unregister_all(dev);
+	return ret;
+}
+
+/**
+ * drm_get_connector_status_name - return a string for connector status
+ * @status: connector status to compute name of
+ *
+ * In contrast to the other drm_get_*_name functions this one here returns a
+ * const pointer and hence is threadsafe.
+ */
+const char *drm_get_connector_status_name(enum drm_connector_status status)
+{
+	if (status == connector_status_connected)
+		return "connected";
+	else if (status == connector_status_disconnected)
+		return "disconnected";
+	else
+		return "unknown";
+}
+EXPORT_SYMBOL(drm_get_connector_status_name);
+
+static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
+	{ SubPixelUnknown, "Unknown" },
+	{ SubPixelHorizontalRGB, "Horizontal RGB" },
+	{ SubPixelHorizontalBGR, "Horizontal BGR" },
+	{ SubPixelVerticalRGB, "Vertical RGB" },
+	{ SubPixelVerticalBGR, "Vertical BGR" },
+	{ SubPixelNone, "None" },
+};
+
+/**
+ * drm_get_subpixel_order_name - return a string for a given subpixel enum
+ * @order: enum of subpixel_order
+ *
+ * Note you could abuse this and return something out of bounds, but that
+ * would be a caller error.  No unscrubbed user data should make it here.
+ */
+const char *drm_get_subpixel_order_name(enum subpixel_order order)
+{
+	return drm_subpixel_enum_list[order].name;
+}
+EXPORT_SYMBOL(drm_get_subpixel_order_name);
+
+static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
+	{ DRM_MODE_DPMS_ON, "On" },
+	{ DRM_MODE_DPMS_STANDBY, "Standby" },
+	{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
+	{ DRM_MODE_DPMS_OFF, "Off" }
+};
+DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
+
+/* Optional connector properties. */
+static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
+	{ DRM_MODE_SCALE_NONE, "None" },
+	{ DRM_MODE_SCALE_FULLSCREEN, "Full" },
+	{ DRM_MODE_SCALE_CENTER, "Center" },
+	{ DRM_MODE_SCALE_ASPECT, "Full aspect" },
+};
+
+static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
+	{ DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
+	{ DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
+	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
+};
+
+static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
+
+static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
+		 drm_dvi_i_subconnector_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
+		 drm_tv_subconnector_enum_list)
+
+int drm_connector_create_standard_properties(struct drm_device *dev)
+{
+	struct drm_property *prop;
+
+	prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "EDID", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.edid_property = prop;
+
+	prop = drm_property_create_enum(dev, 0,
+				   "DPMS", drm_dpms_enum_list,
+				   ARRAY_SIZE(drm_dpms_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.dpms_property = prop;
+
+	prop = drm_property_create(dev,
+				   DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "PATH", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.path_property = prop;
+
+	prop = drm_property_create(dev,
+				   DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "TILE", 0);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.tile_property = prop;
+
+	return 0;
+}
+
+/**
+ * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
+ * @dev: DRM device
+ *
+ * Called by a driver the first time a DVI-I connector is made.
+ */
+int drm_mode_create_dvi_i_properties(struct drm_device *dev)
+{
+	struct drm_property *dvi_i_selector;
+	struct drm_property *dvi_i_subconnector;
+
+	if (dev->mode_config.dvi_i_select_subconnector_property)
+		return 0;
+
+	dvi_i_selector =
+		drm_property_create_enum(dev, 0,
+				    "select subconnector",
+				    drm_dvi_i_select_enum_list,
+				    ARRAY_SIZE(drm_dvi_i_select_enum_list));
+	dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
+
+	dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    drm_dvi_i_subconnector_enum_list,
+				    ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
+	dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
+
+/**
+ * drm_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @num_modes: number of different TV formats (modes) supported
+ * @modes: array of pointers to strings containing name of each format
+ *
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.  Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int num_modes,
+				  const char * const modes[])
+{
+	struct drm_property *tv_selector;
+	struct drm_property *tv_subconnector;
+	unsigned int i;
+
+	if (dev->mode_config.tv_select_subconnector_property)
+		return 0;
+
+	/*
+	 * Basic connector properties
+	 */
+	tv_selector = drm_property_create_enum(dev, 0,
+					  "select subconnector",
+					  drm_tv_select_enum_list,
+					  ARRAY_SIZE(drm_tv_select_enum_list));
+	if (!tv_selector)
+		goto nomem;
+
+	dev->mode_config.tv_select_subconnector_property = tv_selector;
+
+	tv_subconnector =
+		drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    drm_tv_subconnector_enum_list,
+				    ARRAY_SIZE(drm_tv_subconnector_enum_list));
+	if (!tv_subconnector)
+		goto nomem;
+	dev->mode_config.tv_subconnector_property = tv_subconnector;
+
+	/*
+	 * Other, TV specific properties: margins & TV modes.
+	 */
+	dev->mode_config.tv_left_margin_property =
+		drm_property_create_range(dev, 0, "left margin", 0, 100);
+	if (!dev->mode_config.tv_left_margin_property)
+		goto nomem;
+
+	dev->mode_config.tv_right_margin_property =
+		drm_property_create_range(dev, 0, "right margin", 0, 100);
+	if (!dev->mode_config.tv_right_margin_property)
+		goto nomem;
+
+	dev->mode_config.tv_top_margin_property =
+		drm_property_create_range(dev, 0, "top margin", 0, 100);
+	if (!dev->mode_config.tv_top_margin_property)
+		goto nomem;
+
+	dev->mode_config.tv_bottom_margin_property =
+		drm_property_create_range(dev, 0, "bottom margin", 0, 100);
+	if (!dev->mode_config.tv_bottom_margin_property)
+		goto nomem;
+
+	dev->mode_config.tv_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "mode", num_modes);
+	if (!dev->mode_config.tv_mode_property)
+		goto nomem;
+
+	for (i = 0; i < num_modes; i++)
+		drm_property_add_enum(dev->mode_config.tv_mode_property, i,
+				      i, modes[i]);
+
+	dev->mode_config.tv_brightness_property =
+		drm_property_create_range(dev, 0, "brightness", 0, 100);
+	if (!dev->mode_config.tv_brightness_property)
+		goto nomem;
+
+	dev->mode_config.tv_contrast_property =
+		drm_property_create_range(dev, 0, "contrast", 0, 100);
+	if (!dev->mode_config.tv_contrast_property)
+		goto nomem;
+
+	dev->mode_config.tv_flicker_reduction_property =
+		drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
+	if (!dev->mode_config.tv_flicker_reduction_property)
+		goto nomem;
+
+	dev->mode_config.tv_overscan_property =
+		drm_property_create_range(dev, 0, "overscan", 0, 100);
+	if (!dev->mode_config.tv_overscan_property)
+		goto nomem;
+
+	dev->mode_config.tv_saturation_property =
+		drm_property_create_range(dev, 0, "saturation", 0, 100);
+	if (!dev->mode_config.tv_saturation_property)
+		goto nomem;
+
+	dev->mode_config.tv_hue_property =
+		drm_property_create_range(dev, 0, "hue", 0, 100);
+	if (!dev->mode_config.tv_hue_property)
+		goto nomem;
+
+	return 0;
+nomem:
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
+/**
+ * drm_mode_create_scaling_mode_property - create scaling mode property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_scaling_mode_property(struct drm_device *dev)
+{
+	struct drm_property *scaling_mode;
+
+	if (dev->mode_config.scaling_mode_property)
+		return 0;
+
+	scaling_mode =
+		drm_property_create_enum(dev, 0, "scaling mode",
+				drm_scaling_mode_enum_list,
+				    ARRAY_SIZE(drm_scaling_mode_enum_list));
+
+	dev->mode_config.scaling_mode_property = scaling_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
+
+/**
+ * drm_mode_create_aspect_ratio_property - create aspect ratio property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
+{
+	if (dev->mode_config.aspect_ratio_property)
+		return 0;
+
+	dev->mode_config.aspect_ratio_property =
+		drm_property_create_enum(dev, 0, "aspect ratio",
+				drm_aspect_ratio_enum_list,
+				ARRAY_SIZE(drm_aspect_ratio_enum_list));
+
+	if (dev->mode_config.aspect_ratio_property == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
+
+/**
+ * drm_mode_create_suggested_offset_properties - create suggests offset properties
+ * @dev: DRM device
+ *
+ * Create the the suggested x/y offset property for connectors.
+ */
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
+{
+	if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
+		return 0;
+
+	dev->mode_config.suggested_x_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
+
+	dev->mode_config.suggested_y_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
+
+	if (dev->mode_config.suggested_x_property == NULL ||
+	    dev->mode_config.suggested_y_property == NULL)
+		return -ENOMEM;
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
+
+/**
+ * drm_mode_connector_set_path_property - set tile property on connector
+ * @connector: connector to set property on.
+ * @path: path to use for property; must not be NULL.
+ *
+ * This creates a property to expose to userspace to specify a
+ * connector path. This is mainly used for DisplayPort MST where
+ * connectors have a topology and we want to allow userspace to give
+ * them more meaningful names.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_set_path_property(struct drm_connector *connector,
+					 const char *path)
+{
+	struct drm_device *dev = connector->dev;
+	int ret;
+
+	ret = drm_property_replace_global_blob(dev,
+	                                       &connector->path_blob_ptr,
+	                                       strlen(path) + 1,
+	                                       path,
+	                                       &connector->base,
+	                                       dev->mode_config.path_property);
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_set_path_property);
+
+/**
+ * drm_mode_connector_set_tile_property - set tile property on connector
+ * @connector: connector to set property on.
+ *
+ * This looks up the tile information for a connector, and creates a
+ * property for userspace to parse if it exists. The property is of
+ * the form of 8 integers using ':' as a separator.
+ *
+ * Returns:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_connector_set_tile_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	char tile[256];
+	int ret;
+
+	if (!connector->has_tile) {
+		ret  = drm_property_replace_global_blob(dev,
+		                                        &connector->tile_blob_ptr,
+		                                        0,
+		                                        NULL,
+		                                        &connector->base,
+		                                        dev->mode_config.tile_property);
+		return ret;
+	}
+
+	snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
+		 connector->tile_group->id, connector->tile_is_single_monitor,
+		 connector->num_h_tile, connector->num_v_tile,
+		 connector->tile_h_loc, connector->tile_v_loc,
+		 connector->tile_h_size, connector->tile_v_size);
+
+	ret = drm_property_replace_global_blob(dev,
+	                                       &connector->tile_blob_ptr,
+	                                       strlen(tile) + 1,
+	                                       tile,
+	                                       &connector->base,
+	                                       dev->mode_config.tile_property);
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
+
+/**
+ * drm_mode_connector_update_edid_property - update the edid property of a connector
+ * @connector: drm connector
+ * @edid: new value of the edid property
+ *
+ * This function creates a new blob modeset object and assigns its id to the
+ * connector's edid property.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+					    const struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	size_t size = 0;
+	int ret;
+
+	/* ignore requests to set edid when overridden */
+	if (connector->override_edid)
+		return 0;
+
+	if (edid)
+		size = EDID_LENGTH * (1 + edid->extensions);
+
+	ret = drm_property_replace_global_blob(dev,
+					       &connector->edid_blob_ptr,
+	                                       size,
+	                                       edid,
+	                                       &connector->base,
+	                                       dev->mode_config.edid_property);
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
+
+int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+				    struct drm_property *property,
+				    uint64_t value)
+{
+	int ret = -EINVAL;
+	struct drm_connector *connector = obj_to_connector(obj);
+
+	/* Do DPMS ourselves */
+	if (property == connector->dev->mode_config.dpms_property) {
+		ret = (*connector->funcs->dpms)(connector, (int)value);
+	} else if (connector->funcs->set_property)
+		ret = connector->funcs->set_property(connector, property, value);
+
+	/* store the property value if successful */
+	if (!ret)
+		drm_object_property_set_value(&connector->base, property, value);
+	return ret;
+}
+
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+				       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_connector_set_property *conn_set_prop = data;
+	struct drm_mode_obj_set_property obj_set_prop = {
+		.value = conn_set_prop->value,
+		.prop_id = conn_set_prop->prop_id,
+		.obj_id = conn_set_prop->connector_id,
+		.obj_type = DRM_MODE_OBJECT_CONNECTOR
+	};
+
+	/* It does all the locking and checking we need */
+	return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
+}
+
+static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
+{
+	/* For atomic drivers only state objects are synchronously updated and
+	 * protected by modeset locks, so check those first. */
+	if (connector->state)
+		return connector->state->best_encoder;
+	return connector->encoder;
+}
+
+static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
+					 const struct drm_file *file_priv)
+{
+	/*
+	 * If user-space hasn't configured the driver to expose the stereo 3D
+	 * modes, don't expose them.
+	 */
+	if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
+		return false;
+
+	return true;
+}
+
+int drm_mode_getconnector(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_get_connector *out_resp = data;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *mode;
+	int mode_count = 0;
+	int encoders_count = 0;
+	int ret = 0;
+	int copied = 0;
+	int i;
+	struct drm_mode_modeinfo u_mode;
+	struct drm_mode_modeinfo __user *mode_ptr;
+	uint32_t __user *encoder_ptr;
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		return -EINVAL;
+
+	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	connector = drm_connector_lookup(dev, out_resp->connector_id);
+	if (!connector) {
+		ret = -ENOENT;
+		goto out_unlock;
+	}
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
+		if (connector->encoder_ids[i] != 0)
+			encoders_count++;
+
+	if (out_resp->count_modes == 0) {
+		connector->funcs->fill_modes(connector,
+					     dev->mode_config.max_width,
+					     dev->mode_config.max_height);
+	}
+
+	/* delayed so we get modes regardless of pre-fill_modes state */
+	list_for_each_entry(mode, &connector->modes, head)
+		if (drm_mode_expose_to_userspace(mode, file_priv))
+			mode_count++;
+
+	out_resp->connector_id = connector->base.id;
+	out_resp->connector_type = connector->connector_type;
+	out_resp->connector_type_id = connector->connector_type_id;
+	out_resp->mm_width = connector->display_info.width_mm;
+	out_resp->mm_height = connector->display_info.height_mm;
+	out_resp->subpixel = connector->display_info.subpixel_order;
+	out_resp->connection = connector->status;
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+	encoder = drm_connector_get_encoder(connector);
+	if (encoder)
+		out_resp->encoder_id = encoder->base.id;
+	else
+		out_resp->encoder_id = 0;
+
+	/*
+	 * This ioctl is called twice, once to determine how much space is
+	 * needed, and the 2nd time to fill it.
+	 */
+	if ((out_resp->count_modes >= mode_count) && mode_count) {
+		copied = 0;
+		mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
+		list_for_each_entry(mode, &connector->modes, head) {
+			if (!drm_mode_expose_to_userspace(mode, file_priv))
+				continue;
+
+			drm_mode_convert_to_umode(&u_mode, mode);
+			if (copy_to_user(mode_ptr + copied,
+					 &u_mode, sizeof(u_mode))) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	out_resp->count_modes = mode_count;
+
+	ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
+			(uint32_t __user *)(unsigned long)(out_resp->props_ptr),
+			(uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
+			&out_resp->count_props);
+	if (ret)
+		goto out;
+
+	if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
+		copied = 0;
+		encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
+		for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+			if (connector->encoder_ids[i] != 0) {
+				if (put_user(connector->encoder_ids[i],
+					     encoder_ptr + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	out_resp->count_encoders = encoders_count;
+
+out:
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+	drm_connector_unreference(connector);
+out_unlock:
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return ret;
+}
+
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 1f79f629de52..07eba82a9998 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -45,123 +45,15 @@
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
 
-/* Avoid boilerplate.  I'm tired of typing. */
-#define DRM_ENUM_NAME_FN(fnname, list)				\
-	const char *fnname(int val)				\
-	{							\
-		int i;						\
-		for (i = 0; i < ARRAY_SIZE(list); i++) {	\
-			if (list[i].type == val)		\
-				return list[i].name;		\
-		}						\
-		return "(unknown)";				\
-	}
-
 /*
  * Global properties
  */
-static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
-	{ DRM_MODE_DPMS_ON, "On" },
-	{ DRM_MODE_DPMS_STANDBY, "Standby" },
-	{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
-	{ DRM_MODE_DPMS_OFF, "Off" }
-};
-
-DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
-
 static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
 	{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
 	{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
 	{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
 };
 
-/*
- * Optional properties
- */
-static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
-	{ DRM_MODE_SCALE_NONE, "None" },
-	{ DRM_MODE_SCALE_FULLSCREEN, "Full" },
-	{ DRM_MODE_SCALE_CENTER, "Center" },
-	{ DRM_MODE_SCALE_ASPECT, "Full aspect" },
-};
-
-static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
-	{ DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
-	{ DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
-	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
-};
-
-/*
- * Non-global properties, but "required" for certain connectors.
- */
-static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
-	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
-	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
-	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
-};
-
-DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
-
-static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
-	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
-	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
-	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
-};
-
-DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
-		 drm_dvi_i_subconnector_enum_list)
-
-static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
-	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
-	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
-};
-
-DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
-
-static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
-	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
-	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
-	{ DRM_MODE_SUBCONNECTOR_SCART,     "SCART"     }, /* TV-out */
-};
-
-DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
-		 drm_tv_subconnector_enum_list)
-
-struct drm_conn_prop_enum_list {
-	int type;
-	const char *name;
-	struct ida ida;
-};
-
-/*
- * Connector and encoder types.
- */
-static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
-	{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
-	{ DRM_MODE_CONNECTOR_VGA, "VGA" },
-	{ DRM_MODE_CONNECTOR_DVII, "DVI-I" },
-	{ DRM_MODE_CONNECTOR_DVID, "DVI-D" },
-	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
-	{ DRM_MODE_CONNECTOR_Composite, "Composite" },
-	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
-	{ DRM_MODE_CONNECTOR_LVDS, "LVDS" },
-	{ DRM_MODE_CONNECTOR_Component, "Component" },
-	{ DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
-	{ DRM_MODE_CONNECTOR_DisplayPort, "DP" },
-	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
-	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
-	{ DRM_MODE_CONNECTOR_TV, "TV" },
-	{ DRM_MODE_CONNECTOR_eDP, "eDP" },
-	{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
-	{ DRM_MODE_CONNECTOR_DSI, "DSI" },
-	{ DRM_MODE_CONNECTOR_DPI, "DPI" },
-};
-
 static const struct drm_prop_enum_list drm_encoder_enum_list[] = {
 	{ DRM_MODE_ENCODER_NONE, "None" },
 	{ DRM_MODE_ENCODER_DAC, "DAC" },
@@ -174,62 +66,9 @@ static const struct drm_prop_enum_list drm_encoder_enum_list[] = {
 	{ DRM_MODE_ENCODER_DPI, "DPI" },
 };
 
-static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
-	{ SubPixelUnknown, "Unknown" },
-	{ SubPixelHorizontalRGB, "Horizontal RGB" },
-	{ SubPixelHorizontalBGR, "Horizontal BGR" },
-	{ SubPixelVerticalRGB, "Vertical RGB" },
-	{ SubPixelVerticalBGR, "Vertical BGR" },
-	{ SubPixelNone, "None" },
-};
-
-void drm_connector_ida_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
-		ida_init(&drm_connector_enum_list[i].ida);
-}
-
-void drm_connector_ida_destroy(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
-		ida_destroy(&drm_connector_enum_list[i].ida);
-}
-
-/**
- * drm_get_connector_status_name - return a string for connector status
- * @status: connector status to compute name of
- *
- * In contrast to the other drm_get_*_name functions this one here returns a
- * const pointer and hence is threadsafe.
- */
-const char *drm_get_connector_status_name(enum drm_connector_status status)
-{
-	if (status == connector_status_connected)
-		return "connected";
-	else if (status == connector_status_disconnected)
-		return "disconnected";
-	else
-		return "unknown";
-}
-EXPORT_SYMBOL(drm_get_connector_status_name);
-
-/**
- * drm_get_subpixel_order_name - return a string for a given subpixel enum
- * @order: enum of subpixel_order
- *
- * Note you could abuse this and return something out of bounds, but that
- * would be a caller error.  No unscrubbed user data should make it here.
+/*
+ * Optional properties
  */
-const char *drm_get_subpixel_order_name(enum subpixel_order order)
-{
-	return drm_subpixel_enum_list[order].name;
-}
-EXPORT_SYMBOL(drm_get_subpixel_order_name);
-
 /*
  * Internal function to assign a slot in the object idr and optionally
  * register the object into the idr.
@@ -580,20 +419,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc)
 }
 EXPORT_SYMBOL(drm_crtc_cleanup);
 
-/*
- * drm_mode_remove - remove and free a mode
- * @connector: connector list to modify
- * @mode: mode to remove
- *
- * Remove @mode from @connector's mode list, then free it.
- */
-static void drm_mode_remove(struct drm_connector *connector,
-			    struct drm_display_mode *mode)
-{
-	list_del(&mode->head);
-	drm_mode_destroy(connector->dev, mode);
-}
-
 /**
  * drm_display_info_set_bus_formats - set the supported bus formats
  * @info: display info to store bus formats in
@@ -628,312 +453,6 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
 }
 EXPORT_SYMBOL(drm_display_info_set_bus_formats);
 
-/**
- * drm_connector_get_cmdline_mode - reads the user's cmdline mode
- * @connector: connector to quwery
- *
- * The kernel supports per-connector configration of its consoles through
- * use of the video= parameter. This function parses that option and
- * extracts the user's specified mode (or enable/disable status) for a
- * particular connector. This is typically only used during the early fbdev
- * setup.
- */
-static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
-{
-	struct drm_cmdline_mode *mode = &connector->cmdline_mode;
-	char *option = NULL;
-
-	if (fb_get_options(connector->name, &option))
-		return;
-
-	if (!drm_mode_parse_command_line_for_connector(option,
-						       connector,
-						       mode))
-		return;
-
-	if (mode->force) {
-		const char *s;
-
-		switch (mode->force) {
-		case DRM_FORCE_OFF:
-			s = "OFF";
-			break;
-		case DRM_FORCE_ON_DIGITAL:
-			s = "ON - dig";
-			break;
-		default:
-		case DRM_FORCE_ON:
-			s = "ON";
-			break;
-		}
-
-		DRM_INFO("forcing %s connector %s\n", connector->name, s);
-		connector->force = mode->force;
-	}
-
-	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
-		      connector->name,
-		      mode->xres, mode->yres,
-		      mode->refresh_specified ? mode->refresh : 60,
-		      mode->rb ? " reduced blanking" : "",
-		      mode->margins ? " with margins" : "",
-		      mode->interlace ?  " interlaced" : "");
-}
-
-static void drm_connector_free(struct kref *kref)
-{
-	struct drm_connector *connector =
-		container_of(kref, struct drm_connector, base.refcount);
-	struct drm_device *dev = connector->dev;
-
-	drm_mode_object_unregister(dev, &connector->base);
-	connector->funcs->destroy(connector);
-}
-
-/**
- * drm_connector_init - Init a preallocated connector
- * @dev: DRM device
- * @connector: the connector to init
- * @funcs: callbacks for this connector
- * @connector_type: user visible type of the connector
- *
- * Initialises a preallocated connector. Connectors should be
- * subclassed as part of driver connector objects.
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_connector_init(struct drm_device *dev,
-		       struct drm_connector *connector,
-		       const struct drm_connector_funcs *funcs,
-		       int connector_type)
-{
-	struct drm_mode_config *config = &dev->mode_config;
-	int ret;
-	struct ida *connector_ida =
-		&drm_connector_enum_list[connector_type].ida;
-
-	drm_modeset_lock_all(dev);
-
-	ret = drm_mode_object_get_reg(dev, &connector->base,
-				      DRM_MODE_OBJECT_CONNECTOR,
-				      false, drm_connector_free);
-	if (ret)
-		goto out_unlock;
-
-	connector->base.properties = &connector->properties;
-	connector->dev = dev;
-	connector->funcs = funcs;
-
-	ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
-	if (ret < 0)
-		goto out_put;
-	connector->index = ret;
-	ret = 0;
-
-	connector->connector_type = connector_type;
-	connector->connector_type_id =
-		ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
-	if (connector->connector_type_id < 0) {
-		ret = connector->connector_type_id;
-		goto out_put_id;
-	}
-	connector->name =
-		kasprintf(GFP_KERNEL, "%s-%d",
-			  drm_connector_enum_list[connector_type].name,
-			  connector->connector_type_id);
-	if (!connector->name) {
-		ret = -ENOMEM;
-		goto out_put_type_id;
-	}
-
-	INIT_LIST_HEAD(&connector->probed_modes);
-	INIT_LIST_HEAD(&connector->modes);
-	connector->edid_blob_ptr = NULL;
-	connector->status = connector_status_unknown;
-
-	drm_connector_get_cmdline_mode(connector);
-
-	/* We should add connectors at the end to avoid upsetting the connector
-	 * index too much. */
-	list_add_tail(&connector->head, &config->connector_list);
-	config->num_connector++;
-
-	if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
-		drm_object_attach_property(&connector->base,
-					      config->edid_property,
-					      0);
-
-	drm_object_attach_property(&connector->base,
-				      config->dpms_property, 0);
-
-	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
-		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
-	}
-
-	connector->debugfs_entry = NULL;
-out_put_type_id:
-	if (ret)
-		ida_remove(connector_ida, connector->connector_type_id);
-out_put_id:
-	if (ret)
-		ida_remove(&config->connector_ida, connector->index);
-out_put:
-	if (ret)
-		drm_mode_object_unregister(dev, &connector->base);
-
-out_unlock:
-	drm_modeset_unlock_all(dev);
-
-	return ret;
-}
-EXPORT_SYMBOL(drm_connector_init);
-
-/**
- * drm_connector_cleanup - cleans up an initialised connector
- * @connector: connector to cleanup
- *
- * Cleans up the connector but doesn't free the object.
- */
-void drm_connector_cleanup(struct drm_connector *connector)
-{
-	struct drm_device *dev = connector->dev;
-	struct drm_display_mode *mode, *t;
-
-	/* The connector should have been removed from userspace long before
-	 * it is finally destroyed.
-	 */
-	if (WARN_ON(connector->registered))
-		drm_connector_unregister(connector);
-
-	if (connector->tile_group) {
-		drm_mode_put_tile_group(dev, connector->tile_group);
-		connector->tile_group = NULL;
-	}
-
-	list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
-		drm_mode_remove(connector, mode);
-
-	list_for_each_entry_safe(mode, t, &connector->modes, head)
-		drm_mode_remove(connector, mode);
-
-	ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
-		   connector->connector_type_id);
-
-	ida_remove(&dev->mode_config.connector_ida,
-		   connector->index);
-
-	kfree(connector->display_info.bus_formats);
-	drm_mode_object_unregister(dev, &connector->base);
-	kfree(connector->name);
-	connector->name = NULL;
-	list_del(&connector->head);
-	dev->mode_config.num_connector--;
-
-	WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
-	if (connector->state && connector->funcs->atomic_destroy_state)
-		connector->funcs->atomic_destroy_state(connector,
-						       connector->state);
-
-	memset(connector, 0, sizeof(*connector));
-}
-EXPORT_SYMBOL(drm_connector_cleanup);
-
-/**
- * drm_connector_register - register a connector
- * @connector: the connector to register
- *
- * Register userspace interfaces for a connector
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_connector_register(struct drm_connector *connector)
-{
-	int ret;
-
-	if (connector->registered)
-		return 0;
-
-	ret = drm_sysfs_connector_add(connector);
-	if (ret)
-		return ret;
-
-	ret = drm_debugfs_connector_add(connector);
-	if (ret) {
-		goto err_sysfs;
-	}
-
-	if (connector->funcs->late_register) {
-		ret = connector->funcs->late_register(connector);
-		if (ret)
-			goto err_debugfs;
-	}
-
-	drm_mode_object_register(connector->dev, &connector->base);
-
-	connector->registered = true;
-	return 0;
-
-err_debugfs:
-	drm_debugfs_connector_remove(connector);
-err_sysfs:
-	drm_sysfs_connector_remove(connector);
-	return ret;
-}
-EXPORT_SYMBOL(drm_connector_register);
-
-/**
- * drm_connector_unregister - unregister a connector
- * @connector: the connector to unregister
- *
- * Unregister userspace interfaces for a connector
- */
-void drm_connector_unregister(struct drm_connector *connector)
-{
-	if (!connector->registered)
-		return;
-
-	if (connector->funcs->early_unregister)
-		connector->funcs->early_unregister(connector);
-
-	drm_sysfs_connector_remove(connector);
-	drm_debugfs_connector_remove(connector);
-
-	connector->registered = false;
-}
-EXPORT_SYMBOL(drm_connector_unregister);
-
-static void drm_connector_unregister_all(struct drm_device *dev)
-{
-	struct drm_connector *connector;
-
-	/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
-		drm_connector_unregister(connector);
-}
-
-static int drm_connector_register_all(struct drm_device *dev)
-{
-	struct drm_connector *connector;
-	int ret;
-
-	/* FIXME: taking the mode config mutex ends up in a clash with
-	 * fbcon/backlight registration */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		ret = drm_connector_register(connector);
-		if (ret)
-			goto err;
-	}
-
-	return 0;
-
-err:
-	mutex_unlock(&dev->mode_config.mutex);
-	drm_connector_unregister_all(dev);
-	return ret;
-}
-
 static int drm_encoder_register_all(struct drm_device *dev)
 {
 	struct drm_encoder *encoder;
@@ -1337,39 +856,11 @@ void drm_modeset_unregister_all(struct drm_device *dev)
 static int drm_mode_create_standard_properties(struct drm_device *dev)
 {
 	struct drm_property *prop;
+	int ret;
 
-	/*
-	 * Standard properties (apply to all connectors)
-	 */
-	prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
-				   DRM_MODE_PROP_IMMUTABLE,
-				   "EDID", 0);
-	if (!prop)
-		return -ENOMEM;
-	dev->mode_config.edid_property = prop;
-
-	prop = drm_property_create_enum(dev, 0,
-				   "DPMS", drm_dpms_enum_list,
-				   ARRAY_SIZE(drm_dpms_enum_list));
-	if (!prop)
-		return -ENOMEM;
-	dev->mode_config.dpms_property = prop;
-
-	prop = drm_property_create(dev,
-				   DRM_MODE_PROP_BLOB |
-				   DRM_MODE_PROP_IMMUTABLE,
-				   "PATH", 0);
-	if (!prop)
-		return -ENOMEM;
-	dev->mode_config.path_property = prop;
-
-	prop = drm_property_create(dev,
-				   DRM_MODE_PROP_BLOB |
-				   DRM_MODE_PROP_IMMUTABLE,
-				   "TILE", 0);
-	if (!prop)
-		return -ENOMEM;
-	dev->mode_config.tile_property = prop;
+	ret = drm_connector_create_standard_properties(dev);
+	if (ret)
+		return ret;
 
 	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
 					"type", drm_plane_type_enum_list,
@@ -1490,225 +981,6 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 }
 
 /**
- * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
- * @dev: DRM device
- *
- * Called by a driver the first time a DVI-I connector is made.
- */
-int drm_mode_create_dvi_i_properties(struct drm_device *dev)
-{
-	struct drm_property *dvi_i_selector;
-	struct drm_property *dvi_i_subconnector;
-
-	if (dev->mode_config.dvi_i_select_subconnector_property)
-		return 0;
-
-	dvi_i_selector =
-		drm_property_create_enum(dev, 0,
-				    "select subconnector",
-				    drm_dvi_i_select_enum_list,
-				    ARRAY_SIZE(drm_dvi_i_select_enum_list));
-	dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
-
-	dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				    "subconnector",
-				    drm_dvi_i_subconnector_enum_list,
-				    ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
-	dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
-
-/**
- * drm_create_tv_properties - create TV specific connector properties
- * @dev: DRM device
- * @num_modes: number of different TV formats (modes) supported
- * @modes: array of pointers to strings containing name of each format
- *
- * Called by a driver's TV initialization routine, this function creates
- * the TV specific connector properties for a given device.  Caller is
- * responsible for allocating a list of format names and passing them to
- * this routine.
- */
-int drm_mode_create_tv_properties(struct drm_device *dev,
-				  unsigned int num_modes,
-				  const char * const modes[])
-{
-	struct drm_property *tv_selector;
-	struct drm_property *tv_subconnector;
-	unsigned int i;
-
-	if (dev->mode_config.tv_select_subconnector_property)
-		return 0;
-
-	/*
-	 * Basic connector properties
-	 */
-	tv_selector = drm_property_create_enum(dev, 0,
-					  "select subconnector",
-					  drm_tv_select_enum_list,
-					  ARRAY_SIZE(drm_tv_select_enum_list));
-	if (!tv_selector)
-		goto nomem;
-
-	dev->mode_config.tv_select_subconnector_property = tv_selector;
-
-	tv_subconnector =
-		drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				    "subconnector",
-				    drm_tv_subconnector_enum_list,
-				    ARRAY_SIZE(drm_tv_subconnector_enum_list));
-	if (!tv_subconnector)
-		goto nomem;
-	dev->mode_config.tv_subconnector_property = tv_subconnector;
-
-	/*
-	 * Other, TV specific properties: margins & TV modes.
-	 */
-	dev->mode_config.tv_left_margin_property =
-		drm_property_create_range(dev, 0, "left margin", 0, 100);
-	if (!dev->mode_config.tv_left_margin_property)
-		goto nomem;
-
-	dev->mode_config.tv_right_margin_property =
-		drm_property_create_range(dev, 0, "right margin", 0, 100);
-	if (!dev->mode_config.tv_right_margin_property)
-		goto nomem;
-
-	dev->mode_config.tv_top_margin_property =
-		drm_property_create_range(dev, 0, "top margin", 0, 100);
-	if (!dev->mode_config.tv_top_margin_property)
-		goto nomem;
-
-	dev->mode_config.tv_bottom_margin_property =
-		drm_property_create_range(dev, 0, "bottom margin", 0, 100);
-	if (!dev->mode_config.tv_bottom_margin_property)
-		goto nomem;
-
-	dev->mode_config.tv_mode_property =
-		drm_property_create(dev, DRM_MODE_PROP_ENUM,
-				    "mode", num_modes);
-	if (!dev->mode_config.tv_mode_property)
-		goto nomem;
-
-	for (i = 0; i < num_modes; i++)
-		drm_property_add_enum(dev->mode_config.tv_mode_property, i,
-				      i, modes[i]);
-
-	dev->mode_config.tv_brightness_property =
-		drm_property_create_range(dev, 0, "brightness", 0, 100);
-	if (!dev->mode_config.tv_brightness_property)
-		goto nomem;
-
-	dev->mode_config.tv_contrast_property =
-		drm_property_create_range(dev, 0, "contrast", 0, 100);
-	if (!dev->mode_config.tv_contrast_property)
-		goto nomem;
-
-	dev->mode_config.tv_flicker_reduction_property =
-		drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
-	if (!dev->mode_config.tv_flicker_reduction_property)
-		goto nomem;
-
-	dev->mode_config.tv_overscan_property =
-		drm_property_create_range(dev, 0, "overscan", 0, 100);
-	if (!dev->mode_config.tv_overscan_property)
-		goto nomem;
-
-	dev->mode_config.tv_saturation_property =
-		drm_property_create_range(dev, 0, "saturation", 0, 100);
-	if (!dev->mode_config.tv_saturation_property)
-		goto nomem;
-
-	dev->mode_config.tv_hue_property =
-		drm_property_create_range(dev, 0, "hue", 0, 100);
-	if (!dev->mode_config.tv_hue_property)
-		goto nomem;
-
-	return 0;
-nomem:
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
-
-/**
- * drm_mode_create_scaling_mode_property - create scaling mode property
- * @dev: DRM device
- *
- * Called by a driver the first time it's needed, must be attached to desired
- * connectors.
- */
-int drm_mode_create_scaling_mode_property(struct drm_device *dev)
-{
-	struct drm_property *scaling_mode;
-
-	if (dev->mode_config.scaling_mode_property)
-		return 0;
-
-	scaling_mode =
-		drm_property_create_enum(dev, 0, "scaling mode",
-				drm_scaling_mode_enum_list,
-				    ARRAY_SIZE(drm_scaling_mode_enum_list));
-
-	dev->mode_config.scaling_mode_property = scaling_mode;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
-
-/**
- * drm_mode_create_aspect_ratio_property - create aspect ratio property
- * @dev: DRM device
- *
- * Called by a driver the first time it's needed, must be attached to desired
- * connectors.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
-{
-	if (dev->mode_config.aspect_ratio_property)
-		return 0;
-
-	dev->mode_config.aspect_ratio_property =
-		drm_property_create_enum(dev, 0, "aspect ratio",
-				drm_aspect_ratio_enum_list,
-				ARRAY_SIZE(drm_aspect_ratio_enum_list));
-
-	if (dev->mode_config.aspect_ratio_property == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
-
-/**
- * drm_mode_create_suggested_offset_properties - create suggests offset properties
- * @dev: DRM device
- *
- * Create the the suggested x/y offset property for connectors.
- */
-int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
-{
-	if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
-		return 0;
-
-	dev->mode_config.suggested_x_property =
-		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
-
-	dev->mode_config.suggested_y_property =
-		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
-
-	if (dev->mode_config.suggested_x_property == NULL ||
-	    dev->mode_config.suggested_y_property == NULL)
-		return -ENOMEM;
-	return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
-
-/**
  * drm_mode_getresources - get graphics configuration
  * @dev: drm device for the ioctl
  * @data: data pointer for the ioctl
@@ -1890,32 +1162,11 @@ int drm_mode_getcrtc(struct drm_device *dev,
 	return 0;
 }
 
-static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
-					 const struct drm_file *file_priv)
-{
-	/*
-	 * If user-space hasn't configured the driver to expose the stereo 3D
-	 * modes, don't expose them.
-	 */
-	if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
-		return false;
-
-	return true;
-}
-
-static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
-{
-	/* For atomic drivers only state objects are synchronously updated and
-	 * protected by modeset locks, so check those first. */
-	if (connector->state)
-		return connector->state->best_encoder;
-	return connector->encoder;
-}
-
 /* helper for getconnector and getproperties ioctls */
-static int get_properties(struct drm_mode_object *obj, bool atomic,
-		uint32_t __user *prop_ptr, uint64_t __user *prop_values,
-		uint32_t *arg_count_props)
+int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
+				   uint32_t __user *prop_ptr,
+				   uint64_t __user *prop_values,
+				   uint32_t *arg_count_props)
 {
 	int props_count;
 	int i, ret, copied;
@@ -1950,133 +1201,6 @@ static int get_properties(struct drm_mode_object *obj, bool atomic,
 	return 0;
 }
 
-/**
- * drm_mode_getconnector - get connector configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Construct a connector configuration structure to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_getconnector(struct drm_device *dev, void *data,
-			  struct drm_file *file_priv)
-{
-	struct drm_mode_get_connector *out_resp = data;
-	struct drm_connector *connector;
-	struct drm_encoder *encoder;
-	struct drm_display_mode *mode;
-	int mode_count = 0;
-	int encoders_count = 0;
-	int ret = 0;
-	int copied = 0;
-	int i;
-	struct drm_mode_modeinfo u_mode;
-	struct drm_mode_modeinfo __user *mode_ptr;
-	uint32_t __user *encoder_ptr;
-
-	if (!drm_core_check_feature(dev, DRIVER_MODESET))
-		return -EINVAL;
-
-	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
-
-	mutex_lock(&dev->mode_config.mutex);
-
-	connector = drm_connector_lookup(dev, out_resp->connector_id);
-	if (!connector) {
-		ret = -ENOENT;
-		goto out_unlock;
-	}
-
-	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
-		if (connector->encoder_ids[i] != 0)
-			encoders_count++;
-
-	if (out_resp->count_modes == 0) {
-		connector->funcs->fill_modes(connector,
-					     dev->mode_config.max_width,
-					     dev->mode_config.max_height);
-	}
-
-	/* delayed so we get modes regardless of pre-fill_modes state */
-	list_for_each_entry(mode, &connector->modes, head)
-		if (drm_mode_expose_to_userspace(mode, file_priv))
-			mode_count++;
-
-	out_resp->connector_id = connector->base.id;
-	out_resp->connector_type = connector->connector_type;
-	out_resp->connector_type_id = connector->connector_type_id;
-	out_resp->mm_width = connector->display_info.width_mm;
-	out_resp->mm_height = connector->display_info.height_mm;
-	out_resp->subpixel = connector->display_info.subpixel_order;
-	out_resp->connection = connector->status;
-
-	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
-	encoder = drm_connector_get_encoder(connector);
-	if (encoder)
-		out_resp->encoder_id = encoder->base.id;
-	else
-		out_resp->encoder_id = 0;
-
-	/*
-	 * This ioctl is called twice, once to determine how much space is
-	 * needed, and the 2nd time to fill it.
-	 */
-	if ((out_resp->count_modes >= mode_count) && mode_count) {
-		copied = 0;
-		mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
-		list_for_each_entry(mode, &connector->modes, head) {
-			if (!drm_mode_expose_to_userspace(mode, file_priv))
-				continue;
-
-			drm_mode_convert_to_umode(&u_mode, mode);
-			if (copy_to_user(mode_ptr + copied,
-					 &u_mode, sizeof(u_mode))) {
-				ret = -EFAULT;
-				goto out;
-			}
-			copied++;
-		}
-	}
-	out_resp->count_modes = mode_count;
-
-	ret = get_properties(&connector->base, file_priv->atomic,
-			(uint32_t __user *)(unsigned long)(out_resp->props_ptr),
-			(uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
-			&out_resp->count_props);
-	if (ret)
-		goto out;
-
-	if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
-		copied = 0;
-		encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
-		for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
-			if (connector->encoder_ids[i] != 0) {
-				if (put_user(connector->encoder_ids[i],
-					     encoder_ptr + copied)) {
-					ret = -EFAULT;
-					goto out;
-				}
-				copied++;
-			}
-		}
-	}
-	out_resp->count_encoders = encoders_count;
-
-out:
-	drm_modeset_unlock(&dev->mode_config.connection_mutex);
-
-	drm_connector_unreference(connector);
-out_unlock:
-	mutex_unlock(&dev->mode_config.mutex);
-
-	return ret;
-}
-
 static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder)
 {
 	struct drm_connector *connector;
@@ -3954,113 +3078,6 @@ err:
 	return ret;
 }
 
-/**
- * drm_mode_connector_set_path_property - set tile property on connector
- * @connector: connector to set property on.
- * @path: path to use for property; must not be NULL.
- *
- * This creates a property to expose to userspace to specify a
- * connector path. This is mainly used for DisplayPort MST where
- * connectors have a topology and we want to allow userspace to give
- * them more meaningful names.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_set_path_property(struct drm_connector *connector,
-					 const char *path)
-{
-	struct drm_device *dev = connector->dev;
-	int ret;
-
-	ret = drm_property_replace_global_blob(dev,
-	                                       &connector->path_blob_ptr,
-	                                       strlen(path) + 1,
-	                                       path,
-	                                       &connector->base,
-	                                       dev->mode_config.path_property);
-	return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_set_path_property);
-
-/**
- * drm_mode_connector_set_tile_property - set tile property on connector
- * @connector: connector to set property on.
- *
- * This looks up the tile information for a connector, and creates a
- * property for userspace to parse if it exists. The property is of
- * the form of 8 integers using ':' as a separator.
- *
- * Returns:
- * Zero on success, errno on failure.
- */
-int drm_mode_connector_set_tile_property(struct drm_connector *connector)
-{
-	struct drm_device *dev = connector->dev;
-	char tile[256];
-	int ret;
-
-	if (!connector->has_tile) {
-		ret  = drm_property_replace_global_blob(dev,
-		                                        &connector->tile_blob_ptr,
-		                                        0,
-		                                        NULL,
-		                                        &connector->base,
-		                                        dev->mode_config.tile_property);
-		return ret;
-	}
-
-	snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
-		 connector->tile_group->id, connector->tile_is_single_monitor,
-		 connector->num_h_tile, connector->num_v_tile,
-		 connector->tile_h_loc, connector->tile_v_loc,
-		 connector->tile_h_size, connector->tile_v_size);
-
-	ret = drm_property_replace_global_blob(dev,
-	                                       &connector->tile_blob_ptr,
-	                                       strlen(tile) + 1,
-	                                       tile,
-	                                       &connector->base,
-	                                       dev->mode_config.tile_property);
-	return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
-
-/**
- * drm_mode_connector_update_edid_property - update the edid property of a connector
- * @connector: drm connector
- * @edid: new value of the edid property
- *
- * This function creates a new blob modeset object and assigns its id to the
- * connector's edid property.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_update_edid_property(struct drm_connector *connector,
-					    const struct edid *edid)
-{
-	struct drm_device *dev = connector->dev;
-	size_t size = 0;
-	int ret;
-
-	/* ignore requests to set edid when overridden */
-	if (connector->override_edid)
-		return 0;
-
-	if (edid)
-		size = EDID_LENGTH * (1 + edid->extensions);
-
-	ret = drm_property_replace_global_blob(dev,
-					       &connector->edid_blob_ptr,
-	                                       size,
-	                                       edid,
-	                                       &connector->base,
-	                                       dev->mode_config.edid_property);
-	return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
-
 /* Some properties could refer to dynamic refcnt'd objects, or things that
  * need special locking to handle lifetime issues (ie. to ensure the prop
  * value doesn't become invalid part way through the property update due to
@@ -4137,54 +3154,6 @@ void drm_property_change_valid_put(struct drm_property *property,
 		drm_property_unreference_blob(obj_to_blob(ref));
 }
 
-/**
- * drm_mode_connector_property_set_ioctl - set the current value of a connector property
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This function sets the current value for a connectors's property. It also
- * calls into a driver's ->set_property callback to update the hardware state
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
-				       void *data, struct drm_file *file_priv)
-{
-	struct drm_mode_connector_set_property *conn_set_prop = data;
-	struct drm_mode_obj_set_property obj_set_prop = {
-		.value = conn_set_prop->value,
-		.prop_id = conn_set_prop->prop_id,
-		.obj_id = conn_set_prop->connector_id,
-		.obj_type = DRM_MODE_OBJECT_CONNECTOR
-	};
-
-	/* It does all the locking and checking we need */
-	return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
-}
-
-static int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
-					   struct drm_property *property,
-					   uint64_t value)
-{
-	int ret = -EINVAL;
-	struct drm_connector *connector = obj_to_connector(obj);
-
-	/* Do DPMS ourselves */
-	if (property == connector->dev->mode_config.dpms_property) {
-		ret = (*connector->funcs->dpms)(connector, (int)value);
-	} else if (connector->funcs->set_property)
-		ret = connector->funcs->set_property(connector, property, value);
-
-	/* store the property value if successful */
-	if (!ret)
-		drm_object_property_set_value(&connector->base, property, value);
-	return ret;
-}
-
 static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
 				      struct drm_property *property,
 				      uint64_t value)
@@ -4266,7 +3235,7 @@ int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
 		goto out_unref;
 	}
 
-	ret = get_properties(obj, file_priv->atomic,
+	ret = drm_mode_object_get_properties(obj, file_priv->atomic,
 			(uint32_t __user *)(unsigned long)(arg->props_ptr),
 			(uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
 			&arg->count_props);
@@ -4278,22 +3247,6 @@ out:
 	return ret;
 }
 
-/**
- * drm_mode_obj_set_property_ioctl - set the current value of an object's property
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This function sets the current value for an object's property. It also calls
- * into a driver's ->set_property callback to update the hardware state.
- * Compared to the connector specific ioctl this one is extended to also work on
- * crtc and plane objects.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
 int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 				    struct drm_file *file_priv)
 {
@@ -4359,47 +3312,6 @@ out:
 }
 
 /**
- * drm_mode_connector_attach_encoder - attach a connector to an encoder
- * @connector: connector to attach
- * @encoder: encoder to attach @connector to
- *
- * This function links up a connector to an encoder. Note that the routing
- * restrictions between encoders and crtcs are exposed to userspace through the
- * possible_clones and possible_crtcs bitmasks.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_attach_encoder(struct drm_connector *connector,
-				      struct drm_encoder *encoder)
-{
-	int i;
-
-	/*
-	 * In the past, drivers have attempted to model the static association
-	 * of connector to encoder in simple connector/encoder devices using a
-	 * direct assignment of connector->encoder = encoder. This connection
-	 * is a logical one and the responsibility of the core, so drivers are
-	 * expected not to mess with this.
-	 *
-	 * Note that the error return should've been enough here, but a large
-	 * majority of drivers ignores the return value, so add in a big WARN
-	 * to get people's attention.
-	 */
-	if (WARN_ON(connector->encoder))
-		return -EINVAL;
-
-	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
-		if (connector->encoder_ids[i] == 0) {
-			connector->encoder_ids[i] = encoder->base.id;
-			return 0;
-		}
-	}
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
-
-/**
  * drm_mode_crtc_set_gamma_size - set the gamma table size
  * @crtc: CRTC to set the gamma table size for
  * @gamma_size: size of the gamma table
diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
index 5f1e9ff71ae4..7725d0fa7877 100644
--- a/drivers/gpu/drm/drm_crtc_internal.h
+++ b/drivers/gpu/drm/drm_crtc_internal.h
@@ -33,8 +33,6 @@
 
 
 /* drm_crtc.c */
-void drm_connector_ida_init(void);
-void drm_connector_ida_destroy(void);
 int drm_mode_object_get_reg(struct drm_device *dev,
 			    struct drm_mode_object *obj,
 			    uint32_t obj_type,
@@ -48,6 +46,10 @@ struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev,
 					       uint32_t id, uint32_t type);
 void drm_mode_object_unregister(struct drm_device *dev,
 				struct drm_mode_object *object);
+int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
+				   uint32_t __user *prop_ptr,
+				   uint64_t __user *prop_values,
+				   uint32_t *arg_count_props);
 bool drm_property_change_valid_get(struct drm_property *property,
 				   uint64_t value,
 				   struct drm_mode_object **ref);
@@ -85,8 +87,6 @@ int drm_mode_getplane_res(struct drm_device *dev, void *data,
 			  struct drm_file *file_priv);
 int drm_mode_getcrtc(struct drm_device *dev,
 		     void *data, struct drm_file *file_priv);
-int drm_mode_getconnector(struct drm_device *dev,
-			  void *data, struct drm_file *file_priv);
 int drm_mode_setcrtc(struct drm_device *dev,
 		     void *data, struct drm_file *file_priv);
 int drm_mode_getplane(struct drm_device *dev,
@@ -105,8 +105,6 @@ int drm_mode_createblob_ioctl(struct drm_device *dev,
 			      void *data, struct drm_file *file_priv);
 int drm_mode_destroyblob_ioctl(struct drm_device *dev,
 			       void *data, struct drm_file *file_priv);
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
-					  void *data, struct drm_file *file_priv);
 int drm_mode_getencoder(struct drm_device *dev,
 			void *data, struct drm_file *file_priv);
 int drm_mode_gamma_get_ioctl(struct drm_device *dev,
@@ -117,6 +115,22 @@ int drm_mode_gamma_set_ioctl(struct drm_device *dev,
 int drm_mode_page_flip_ioctl(struct drm_device *dev,
 			     void *data, struct drm_file *file_priv);
 
+/* drm_connector.c */
+void drm_connector_ida_init(void);
+void drm_connector_ida_destroy(void);
+void drm_connector_unregister_all(struct drm_device *dev);
+int drm_connector_register_all(struct drm_device *dev);
+int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+				    struct drm_property *property,
+				    uint64_t value);
+int drm_connector_create_standard_properties(struct drm_device *dev);
+
+/* IOCTL */
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+					  void *data, struct drm_file *file_priv);
+int drm_mode_getconnector(struct drm_device *dev,
+			  void *data, struct drm_file *file_priv);
+
 /* drm_framebuffer.c */
 struct drm_framebuffer *
 drm_internal_framebuffer_create(struct drm_device *dev,
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
new file mode 100644
index 000000000000..ec2bea0b1b38
--- /dev/null
+++ b/include/drm/drm_connector.h
@@ -0,0 +1,644 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_CONNECTOR_H__
+#define __DRM_CONNECTOR_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_modeset.h>
+
+struct drm_connector_helper_funcs;
+struct drm_device;
+struct drm_crtc;
+struct drm_encoder;
+struct drm_property;
+struct drm_property_blob;
+struct edid;
+
+enum drm_connector_force {
+	DRM_FORCE_UNSPECIFIED,
+	DRM_FORCE_OFF,
+	DRM_FORCE_ON,         /* force on analog part normally */
+	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
+enum drm_connector_status {
+	connector_status_connected = 1,
+	connector_status_disconnected = 2,
+	connector_status_unknown = 3,
+};
+
+enum subpixel_order {
+	SubPixelUnknown = 0,
+	SubPixelHorizontalRGB,
+	SubPixelHorizontalBGR,
+	SubPixelVerticalRGB,
+	SubPixelVerticalBGR,
+	SubPixelNone,
+};
+
+/*
+ * Describes a given display (e.g. CRT or flat panel) and its limitations.
+ */
+struct drm_display_info {
+	char name[DRM_DISPLAY_INFO_LEN];
+
+	/* Physical size */
+        unsigned int width_mm;
+	unsigned int height_mm;
+
+	/* Clock limits FIXME: storage format */
+	unsigned int min_vfreq, max_vfreq;
+	unsigned int min_hfreq, max_hfreq;
+	unsigned int pixel_clock;
+	unsigned int bpc;
+
+	enum subpixel_order subpixel_order;
+
+#define DRM_COLOR_FORMAT_RGB444		(1<<0)
+#define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
+#define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
+
+	u32 color_formats;
+
+	const u32 *bus_formats;
+	unsigned int num_bus_formats;
+
+#define DRM_BUS_FLAG_DE_LOW		(1<<0)
+#define DRM_BUS_FLAG_DE_HIGH		(1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE	(1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE	(1<<3)
+
+	u32 bus_flags;
+
+	/* Mask of supported hdmi deep color modes */
+	u8 edid_hdmi_dc_modes;
+
+	u8 cea_rev;
+};
+
+/**
+ * struct drm_connector_state - mutable connector state
+ * @connector: backpointer to the connector
+ * @crtc: CRTC to connect connector to, NULL if disabled
+ * @best_encoder: can be used by helpers and drivers to select the encoder
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_connector_state {
+	struct drm_connector *connector;
+
+	struct drm_crtc *crtc;  /* do not write directly, use drm_atomic_set_crtc_for_connector() */
+
+	struct drm_encoder *best_encoder;
+
+	struct drm_atomic_state *state;
+};
+
+/**
+ * struct drm_connector_funcs - control connectors on a given device
+ *
+ * Each CRTC may have one or more connectors attached to it.  The functions
+ * below allow the core DRM code to control connectors, enumerate available modes,
+ * etc.
+ */
+struct drm_connector_funcs {
+	/**
+	 * @dpms:
+	 *
+	 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
+	 * is exposed as a standard property on the connector, but diverted to
+	 * this callback in the drm core. Note that atomic drivers don't
+	 * implement the 4 level DPMS support on the connector any more, but
+	 * instead only have an on/off "ACTIVE" property on the CRTC object.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_connector_dpms() to implement this hook.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
+	int (*dpms)(struct drm_connector *connector, int mode);
+
+	/**
+	 * @reset:
+	 *
+	 * Reset connector hardware and software state to off. This function isn't
+	 * called by the core directly, only through drm_mode_config_reset().
+	 * It's not a helper hook only for historical reasons.
+	 *
+	 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
+	 * atomic state using this hook.
+	 */
+	void (*reset)(struct drm_connector *connector);
+
+	/**
+	 * @detect:
+	 *
+	 * Check to see if anything is attached to the connector. The parameter
+	 * force is set to false whilst polling, true when checking the
+	 * connector due to a user request. force can be used by the driver to
+	 * avoid expensive, destructive operations during automated probing.
+	 *
+	 * FIXME:
+	 *
+	 * Note that this hook is only called by the probe helper. It's not in
+	 * the helper library vtable purely for historical reasons. The only DRM
+	 * core	entry point to probe connector state is @fill_modes.
+	 *
+	 * RETURNS:
+	 *
+	 * drm_connector_status indicating the connector's status.
+	 */
+	enum drm_connector_status (*detect)(struct drm_connector *connector,
+					    bool force);
+
+	/**
+	 * @force:
+	 *
+	 * This function is called to update internal encoder state when the
+	 * connector is forced to a certain state by userspace, either through
+	 * the sysfs interfaces or on the kernel cmdline. In that case the
+	 * @detect callback isn't called.
+	 *
+	 * FIXME:
+	 *
+	 * Note that this hook is only called by the probe helper. It's not in
+	 * the helper library vtable purely for historical reasons. The only DRM
+	 * core	entry point to probe connector state is @fill_modes.
+	 */
+	void (*force)(struct drm_connector *connector);
+
+	/**
+	 * @fill_modes:
+	 *
+	 * Entry point for output detection and basic mode validation. The
+	 * driver should reprobe the output if needed (e.g. when hotplug
+	 * handling is unreliable), add all detected modes to connector->modes
+	 * and filter out any the device can't support in any configuration. It
+	 * also needs to filter out any modes wider or higher than the
+	 * parameters max_width and max_height indicate.
+	 *
+	 * The drivers must also prune any modes no longer valid from
+	 * connector->modes. Furthermore it must update connector->status and
+	 * connector->edid.  If no EDID has been received for this output
+	 * connector->edid must be NULL.
+	 *
+	 * Drivers using the probe helpers should use
+	 * drm_helper_probe_single_connector_modes() or
+	 * drm_helper_probe_single_connector_modes_nomerge() to implement this
+	 * function.
+	 *
+	 * RETURNS:
+	 *
+	 * The number of modes detected and filled into connector->modes.
+	 */
+	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+
+	/**
+	 * @set_property:
+	 *
+	 * This is the legacy entry point to update a property attached to the
+	 * connector.
+	 *
+	 * Drivers implementing atomic modeset should use
+	 * drm_atomic_helper_connector_set_property() to implement this hook.
+	 *
+	 * This callback is optional if the driver does not support any legacy
+	 * driver-private properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success or a negative error code on failure.
+	 */
+	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
+			     uint64_t val);
+
+	/**
+	 * @late_register:
+	 *
+	 * This optional hook can be used to register additional userspace
+	 * interfaces attached to the connector, light backlight control, i2c,
+	 * DP aux or similar interfaces. It is called late in the driver load
+	 * sequence from drm_connector_register() when registering all the
+	 * core drm connector interfaces. Everything added from this callback
+	 * should be unregistered in the early_unregister callback.
+	 *
+	 * Returns:
+	 *
+	 * 0 on success, or a negative error code on failure.
+	 */
+	int (*late_register)(struct drm_connector *connector);
+
+	/**
+	 * @early_unregister:
+	 *
+	 * This optional hook should be used to unregister the additional
+	 * userspace interfaces attached to the connector from
+	 * late_unregister(). It is called from drm_connector_unregister(),
+	 * early in the driver unload sequence to disable userspace access
+	 * before data structures are torndown.
+	 */
+	void (*early_unregister)(struct drm_connector *connector);
+
+	/**
+	 * @destroy:
+	 *
+	 * Clean up connector resources. This is called at driver unload time
+	 * through drm_mode_config_cleanup(). It can also be called at runtime
+	 * when a connector is being hot-unplugged for drivers that support
+	 * connector hotplugging (e.g. DisplayPort MST).
+	 */
+	void (*destroy)(struct drm_connector *connector);
+
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current atomic state for this connector and return it.
+	 * The core and helpers gurantee that any atomic state duplicated with
+	 * this hook and still owned by the caller (i.e. not transferred to the
+	 * driver by calling ->atomic_commit() from struct
+	 * &drm_mode_config_funcs) will be cleaned up by calling the
+	 * @atomic_destroy_state hook in this structure.
+	 *
+	 * Atomic drivers which don't subclass struct &drm_connector_state should use
+	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
+	 * state structure to extend it with driver-private state should use
+	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
+	 * duplicated in a consistent fashion across drivers.
+	 *
+	 * It is an error to call this hook before connector->state has been
+	 * initialized correctly.
+	 *
+	 * NOTE:
+	 *
+	 * If the duplicate state references refcounted resources this hook must
+	 * acquire a reference for each of them. The driver must release these
+	 * references again in @atomic_destroy_state.
+	 *
+	 * RETURNS:
+	 *
+	 * Duplicated atomic state or NULL when the allocation failed.
+	 */
+	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Destroy a state duplicated with @atomic_duplicate_state and release
+	 * or unreference all resources it references
+	 */
+	void (*atomic_destroy_state)(struct drm_connector *connector,
+				     struct drm_connector_state *state);
+
+	/**
+	 * @atomic_set_property:
+	 *
+	 * Decode a driver-private property value and store the decoded value
+	 * into the passed-in state structure. Since the atomic core decodes all
+	 * standardized properties (even for extensions beyond the core set of
+	 * properties which might not be implemented by all drivers) this
+	 * requires drivers to subclass the state structure.
+	 *
+	 * Such driver-private properties should really only be implemented for
+	 * truly hardware/vendor specific state. Instead it is preferred to
+	 * standardize atomic extension and decode the properties used to expose
+	 * such an extension in the core.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_connector_set_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * NOTE:
+	 *
+	 * This function is called in the state assembly phase of atomic
+	 * modesets, which can be aborted for any reason (including on
+	 * userspace's request to just check whether a configuration would be
+	 * possible). Drivers MUST NOT touch any persistent state (hardware or
+	 * software) or data structures except the passed in @state parameter.
+	 *
+	 * Also since userspace controls in which order properties are set this
+	 * function must not do any input validation (since the state update is
+	 * incomplete and hence likely inconsistent). Instead any such input
+	 * validation must be done in the various atomic_check callbacks.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 if the property has been found, -EINVAL if the property isn't
+	 * implemented by the driver (which shouldn't ever happen, the core only
+	 * asks for properties attached to this connector). No other validation
+	 * is allowed by the driver. The core already checks that the property
+	 * value is within the range (integer, valid enum value, ...) the driver
+	 * set when registering the property.
+	 */
+	int (*atomic_set_property)(struct drm_connector *connector,
+				   struct drm_connector_state *state,
+				   struct drm_property *property,
+				   uint64_t val);
+
+	/**
+	 * @atomic_get_property:
+	 *
+	 * Reads out the decoded driver-private property. This is used to
+	 * implement the GETCONNECTOR IOCTL.
+	 *
+	 * Do not call this function directly, use
+	 * drm_atomic_connector_get_property() instead.
+	 *
+	 * This callback is optional if the driver does not support any
+	 * driver-private atomic properties.
+	 *
+	 * RETURNS:
+	 *
+	 * 0 on success, -EINVAL if the property isn't implemented by the
+	 * driver (which shouldn't ever happen, the core only asks for
+	 * properties attached to this connector).
+	 */
+	int (*atomic_get_property)(struct drm_connector *connector,
+				   const struct drm_connector_state *state,
+				   struct drm_property *property,
+				   uint64_t *val);
+};
+
+/* mode specified on the command line */
+struct drm_cmdline_mode {
+	bool specified;
+	bool refresh_specified;
+	bool bpp_specified;
+	int xres, yres;
+	int bpp;
+	int refresh;
+	bool rb;
+	bool interlace;
+	bool cvt;
+	bool margins;
+	enum drm_connector_force force;
+};
+
+/**
+ * struct drm_connector - central DRM connector control structure
+ * @dev: parent DRM device
+ * @kdev: kernel device for sysfs attributes
+ * @attr: sysfs attributes
+ * @head: list management
+ * @base: base KMS object
+ * @name: human readable name, can be overwritten by the driver
+ * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
+ * @connector_type_id: index into connector type enum
+ * @interlace_allowed: can this connector handle interlaced modes?
+ * @doublescan_allowed: can this connector handle doublescan?
+ * @stereo_allowed: can this connector handle stereo modes?
+ * @registered: is this connector exposed (registered) with userspace?
+ * @modes: modes available on this connector (from fill_modes() + user)
+ * @status: one of the drm_connector_status enums (connected, not, or unknown)
+ * @probed_modes: list of modes derived directly from the display
+ * @display_info: information about attached display (e.g. from EDID)
+ * @funcs: connector control functions
+ * @edid_blob_ptr: DRM property containing EDID if present
+ * @properties: property tracking for this connector
+ * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
+ * @dpms: current dpms state
+ * @helper_private: mid-layer private data
+ * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
+ * @force: a DRM_FORCE_<foo> state for forced mode sets
+ * @override_edid: has the EDID been overwritten through debugfs for testing?
+ * @encoder_ids: valid encoders for this connector
+ * @encoder: encoder driving this connector, if any
+ * @eld: EDID-like data, if present
+ * @dvi_dual: dual link DVI, if found
+ * @max_tmds_clock: max clock rate, if found
+ * @latency_present: AV delay info from ELD, if found
+ * @video_latency: video latency info from ELD, if found
+ * @audio_latency: audio latency info from ELD, if found
+ * @null_edid_counter: track sinks that give us all zeros for the EDID
+ * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
+ * @edid_corrupt: indicates whether the last read EDID was corrupt
+ * @debugfs_entry: debugfs directory for this connector
+ * @state: current atomic state for this connector
+ * @has_tile: is this connector connected to a tiled monitor
+ * @tile_group: tile group for the connected monitor
+ * @tile_is_single_monitor: whether the tile is one monitor housing
+ * @num_h_tile: number of horizontal tiles in the tile group
+ * @num_v_tile: number of vertical tiles in the tile group
+ * @tile_h_loc: horizontal location of this tile
+ * @tile_v_loc: vertical location of this tile
+ * @tile_h_size: horizontal size of this tile.
+ * @tile_v_size: vertical size of this tile.
+ *
+ * Each connector may be connected to one or more CRTCs, or may be clonable by
+ * another connector if they can share a CRTC.  Each connector also has a specific
+ * position in the broader display (referred to as a 'screen' though it could
+ * span multiple monitors).
+ */
+struct drm_connector {
+	struct drm_device *dev;
+	struct device *kdev;
+	struct device_attribute *attr;
+	struct list_head head;
+
+	struct drm_mode_object base;
+
+	char *name;
+
+	/**
+	 * @index: Compacted connector index, which matches the position inside
+	 * the mode_config.list for drivers not supporting hot-add/removing. Can
+	 * be used as an array index. It is invariant over the lifetime of the
+	 * connector.
+	 */
+	unsigned index;
+
+	int connector_type;
+	int connector_type_id;
+	bool interlace_allowed;
+	bool doublescan_allowed;
+	bool stereo_allowed;
+	bool registered;
+	struct list_head modes; /* list of modes on this connector */
+
+	enum drm_connector_status status;
+
+	/* these are modes added by probing with DDC or the BIOS */
+	struct list_head probed_modes;
+
+	struct drm_display_info display_info;
+	const struct drm_connector_funcs *funcs;
+
+	struct drm_property_blob *edid_blob_ptr;
+	struct drm_object_properties properties;
+
+	/**
+	 * @path_blob_ptr:
+	 *
+	 * DRM blob property data for the DP MST path property.
+	 */
+	struct drm_property_blob *path_blob_ptr;
+
+	/**
+	 * @tile_blob_ptr:
+	 *
+	 * DRM blob property data for the tile property (used mostly by DP MST).
+	 * This is meant for screens which are driven through separate display
+	 * pipelines represented by &drm_crtc, which might not be running with
+	 * genlocked clocks. For tiled panels which are genlocked, like
+	 * dual-link LVDS or dual-link DSI, the driver should try to not expose
+	 * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
+	 */
+	struct drm_property_blob *tile_blob_ptr;
+
+/* should we poll this connector for connects and disconnects */
+/* hot plug detectable */
+#define DRM_CONNECTOR_POLL_HPD (1 << 0)
+/* poll for connections */
+#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
+/* can cleanly poll for disconnections without flickering the screen */
+/* DACs should rarely do this without a lot of testing */
+#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+
+	uint8_t polled; /* DRM_CONNECTOR_POLL_* */
+
+	/* requested DPMS state */
+	int dpms;
+
+	const struct drm_connector_helper_funcs *helper_private;
+
+	/* forced on connector */
+	struct drm_cmdline_mode cmdline_mode;
+	enum drm_connector_force force;
+	bool override_edid;
+
+#define DRM_CONNECTOR_MAX_ENCODER 3
+	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
+	struct drm_encoder *encoder; /* currently active encoder */
+
+#define MAX_ELD_BYTES	128
+	/* EDID bits */
+	uint8_t eld[MAX_ELD_BYTES];
+	bool dvi_dual;
+	int max_tmds_clock;	/* in MHz */
+	bool latency_present[2];
+	int video_latency[2];	/* [0]: progressive, [1]: interlaced */
+	int audio_latency[2];
+	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
+	unsigned bad_edid_counter;
+
+	/* Flag for raw EDID header corruption - used in Displayport
+	 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
+	 */
+	bool edid_corrupt;
+
+	struct dentry *debugfs_entry;
+
+	struct drm_connector_state *state;
+
+	/* DisplayID bits */
+	bool has_tile;
+	struct drm_tile_group *tile_group;
+	bool tile_is_single_monitor;
+
+	uint8_t num_h_tile, num_v_tile;
+	uint8_t tile_h_loc, tile_v_loc;
+	uint16_t tile_h_size, tile_v_size;
+};
+
+#define obj_to_connector(x) container_of(x, struct drm_connector, base)
+
+int drm_connector_init(struct drm_device *dev,
+		       struct drm_connector *connector,
+		       const struct drm_connector_funcs *funcs,
+		       int connector_type);
+int drm_connector_register(struct drm_connector *connector);
+void drm_connector_unregister(struct drm_connector *connector);
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+				      struct drm_encoder *encoder);
+
+void drm_connector_cleanup(struct drm_connector *connector);
+static inline unsigned drm_connector_index(struct drm_connector *connector)
+{
+	return connector->index;
+}
+
+/**
+ * drm_connector_lookup - lookup connector object
+ * @dev: DRM device
+ * @id: connector object id
+ *
+ * This function looks up the connector object specified by id
+ * add takes a reference to it.
+ */
+static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
+		uint32_t id)
+{
+	struct drm_mode_object *mo;
+	mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
+	return mo ? obj_to_connector(mo) : NULL;
+}
+
+/**
+ * drm_connector_reference - incr the connector refcnt
+ * @connector: connector
+ *
+ * This function increments the connector's refcount.
+ */
+static inline void drm_connector_reference(struct drm_connector *connector)
+{
+	drm_mode_object_reference(&connector->base);
+}
+
+/**
+ * drm_connector_unreference - unref a connector
+ * @connector: connector to unref
+ *
+ * This function decrements the connector's refcount and frees it if it drops to zero.
+ */
+static inline void drm_connector_unreference(struct drm_connector *connector)
+{
+	drm_mode_object_unreference(&connector->base);
+}
+
+const char *drm_get_connector_status_name(enum drm_connector_status status);
+const char *drm_get_subpixel_order_name(enum subpixel_order order);
+const char *drm_get_dpms_name(int val);
+const char *drm_get_dvi_i_subconnector_name(int val);
+const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_subconnector_name(int val);
+const char *drm_get_tv_select_name(int val);
+
+int drm_mode_create_dvi_i_properties(struct drm_device *dev);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+				  unsigned int num_modes,
+				  const char * const modes[]);
+int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
+
+int drm_mode_connector_set_path_property(struct drm_connector *connector,
+					 const char *path);
+int drm_mode_connector_set_tile_property(struct drm_connector *connector);
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+					    const struct edid *edid);
+#endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index f4d041800551..e30ea0be6417 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -39,31 +39,16 @@
 #include <drm/drm_modeset.h>
 #include <drm/drm_framebuffer.h>
 #include <drm/drm_modes.h>
+#include <drm/drm_connector.h>
 
 struct drm_device;
 struct drm_mode_set;
-struct drm_object_properties;
 struct drm_file;
 struct drm_clip_rect;
 struct device_node;
 struct fence;
 struct edid;
 
-#define DRM_OBJECT_MAX_PROPERTY 24
-struct drm_object_properties {
-	int count, atomic_count;
-	/* NOTE: if we ever start dynamically destroying properties (ie.
-	 * not at drm_mode_config_cleanup() time), then we'd have to do
-	 * a better job of detaching property from mode objects to avoid
-	 * dangling property pointers:
-	 */
-	struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
-	/* do not read/write values directly, but use drm_object_property_get_value()
-	 * and drm_object_property_set_value():
-	 */
-	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
-};
-
 static inline int64_t U642I64(uint64_t val)
 {
 	return (int64_t)*((int64_t *)&val);
@@ -88,61 +73,6 @@ static inline uint64_t I642U64(int64_t val)
 #define DRM_REFLECT_Y	BIT(5)
 #define DRM_REFLECT_MASK (DRM_REFLECT_X | DRM_REFLECT_Y)
 
-enum drm_connector_status {
-	connector_status_connected = 1,
-	connector_status_disconnected = 2,
-	connector_status_unknown = 3,
-};
-
-enum subpixel_order {
-	SubPixelUnknown = 0,
-	SubPixelHorizontalRGB,
-	SubPixelHorizontalBGR,
-	SubPixelVerticalRGB,
-	SubPixelVerticalBGR,
-	SubPixelNone,
-};
-
-#define DRM_COLOR_FORMAT_RGB444		(1<<0)
-#define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
-#define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
-
-#define DRM_BUS_FLAG_DE_LOW		(1<<0)
-#define DRM_BUS_FLAG_DE_HIGH		(1<<1)
-/* drive data on pos. edge */
-#define DRM_BUS_FLAG_PIXDATA_POSEDGE	(1<<2)
-/* drive data on neg. edge */
-#define DRM_BUS_FLAG_PIXDATA_NEGEDGE	(1<<3)
-
-/*
- * Describes a given display (e.g. CRT or flat panel) and its limitations.
- */
-struct drm_display_info {
-	char name[DRM_DISPLAY_INFO_LEN];
-
-	/* Physical size */
-        unsigned int width_mm;
-	unsigned int height_mm;
-
-	/* Clock limits FIXME: storage format */
-	unsigned int min_vfreq, max_vfreq;
-	unsigned int min_hfreq, max_hfreq;
-	unsigned int pixel_clock;
-	unsigned int bpc;
-
-	enum subpixel_order subpixel_order;
-	u32 color_formats;
-
-	const u32 *bus_formats;
-	unsigned int num_bus_formats;
-	u32 bus_flags;
-
-	/* Mask of supported hdmi deep color modes */
-	u8 edid_hdmi_dc_modes;
-
-	u8 cea_rev;
-};
-
 /* data corresponds to displayid vend/prod/serial */
 struct drm_tile_group {
 	struct kref refcount;
@@ -179,7 +109,6 @@ struct drm_property {
 };
 
 struct drm_crtc;
-struct drm_connector;
 struct drm_encoder;
 struct drm_pending_vblank_event;
 struct drm_plane;
@@ -188,7 +117,6 @@ struct drm_atomic_state;
 
 struct drm_crtc_helper_funcs;
 struct drm_encoder_helper_funcs;
-struct drm_connector_helper_funcs;
 struct drm_plane_helper_funcs;
 
 /**
@@ -734,291 +662,6 @@ struct drm_crtc {
 };
 
 /**
- * struct drm_connector_state - mutable connector state
- * @connector: backpointer to the connector
- * @crtc: CRTC to connect connector to, NULL if disabled
- * @best_encoder: can be used by helpers and drivers to select the encoder
- * @state: backpointer to global drm_atomic_state
- */
-struct drm_connector_state {
-	struct drm_connector *connector;
-
-	struct drm_crtc *crtc;  /* do not write directly, use drm_atomic_set_crtc_for_connector() */
-
-	struct drm_encoder *best_encoder;
-
-	struct drm_atomic_state *state;
-};
-
-/**
- * struct drm_connector_funcs - control connectors on a given device
- *
- * Each CRTC may have one or more connectors attached to it.  The functions
- * below allow the core DRM code to control connectors, enumerate available modes,
- * etc.
- */
-struct drm_connector_funcs {
-	/**
-	 * @dpms:
-	 *
-	 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
-	 * is exposed as a standard property on the connector, but diverted to
-	 * this callback in the drm core. Note that atomic drivers don't
-	 * implement the 4 level DPMS support on the connector any more, but
-	 * instead only have an on/off "ACTIVE" property on the CRTC object.
-	 *
-	 * Drivers implementing atomic modeset should use
-	 * drm_atomic_helper_connector_dpms() to implement this hook.
-	 *
-	 * RETURNS:
-	 *
-	 * 0 on success or a negative error code on failure.
-	 */
-	int (*dpms)(struct drm_connector *connector, int mode);
-
-	/**
-	 * @reset:
-	 *
-	 * Reset connector hardware and software state to off. This function isn't
-	 * called by the core directly, only through drm_mode_config_reset().
-	 * It's not a helper hook only for historical reasons.
-	 *
-	 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
-	 * atomic state using this hook.
-	 */
-	void (*reset)(struct drm_connector *connector);
-
-	/**
-	 * @detect:
-	 *
-	 * Check to see if anything is attached to the connector. The parameter
-	 * force is set to false whilst polling, true when checking the
-	 * connector due to a user request. force can be used by the driver to
-	 * avoid expensive, destructive operations during automated probing.
-	 *
-	 * FIXME:
-	 *
-	 * Note that this hook is only called by the probe helper. It's not in
-	 * the helper library vtable purely for historical reasons. The only DRM
-	 * core	entry point to probe connector state is @fill_modes.
-	 *
-	 * RETURNS:
-	 *
-	 * drm_connector_status indicating the connector's status.
-	 */
-	enum drm_connector_status (*detect)(struct drm_connector *connector,
-					    bool force);
-
-	/**
-	 * @force:
-	 *
-	 * This function is called to update internal encoder state when the
-	 * connector is forced to a certain state by userspace, either through
-	 * the sysfs interfaces or on the kernel cmdline. In that case the
-	 * @detect callback isn't called.
-	 *
-	 * FIXME:
-	 *
-	 * Note that this hook is only called by the probe helper. It's not in
-	 * the helper library vtable purely for historical reasons. The only DRM
-	 * core	entry point to probe connector state is @fill_modes.
-	 */
-	void (*force)(struct drm_connector *connector);
-
-	/**
-	 * @fill_modes:
-	 *
-	 * Entry point for output detection and basic mode validation. The
-	 * driver should reprobe the output if needed (e.g. when hotplug
-	 * handling is unreliable), add all detected modes to connector->modes
-	 * and filter out any the device can't support in any configuration. It
-	 * also needs to filter out any modes wider or higher than the
-	 * parameters max_width and max_height indicate.
-	 *
-	 * The drivers must also prune any modes no longer valid from
-	 * connector->modes. Furthermore it must update connector->status and
-	 * connector->edid.  If no EDID has been received for this output
-	 * connector->edid must be NULL.
-	 *
-	 * Drivers using the probe helpers should use
-	 * drm_helper_probe_single_connector_modes() or
-	 * drm_helper_probe_single_connector_modes_nomerge() to implement this
-	 * function.
-	 *
-	 * RETURNS:
-	 *
-	 * The number of modes detected and filled into connector->modes.
-	 */
-	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
-
-	/**
-	 * @set_property:
-	 *
-	 * This is the legacy entry point to update a property attached to the
-	 * connector.
-	 *
-	 * Drivers implementing atomic modeset should use
-	 * drm_atomic_helper_connector_set_property() to implement this hook.
-	 *
-	 * This callback is optional if the driver does not support any legacy
-	 * driver-private properties.
-	 *
-	 * RETURNS:
-	 *
-	 * 0 on success or a negative error code on failure.
-	 */
-	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
-			     uint64_t val);
-
-	/**
-	 * @late_register:
-	 *
-	 * This optional hook can be used to register additional userspace
-	 * interfaces attached to the connector, light backlight control, i2c,
-	 * DP aux or similar interfaces. It is called late in the driver load
-	 * sequence from drm_connector_register() when registering all the
-	 * core drm connector interfaces. Everything added from this callback
-	 * should be unregistered in the early_unregister callback.
-	 *
-	 * Returns:
-	 *
-	 * 0 on success, or a negative error code on failure.
-	 */
-	int (*late_register)(struct drm_connector *connector);
-
-	/**
-	 * @early_unregister:
-	 *
-	 * This optional hook should be used to unregister the additional
-	 * userspace interfaces attached to the connector from
-	 * late_unregister(). It is called from drm_connector_unregister(),
-	 * early in the driver unload sequence to disable userspace access
-	 * before data structures are torndown.
-	 */
-	void (*early_unregister)(struct drm_connector *connector);
-
-	/**
-	 * @destroy:
-	 *
-	 * Clean up connector resources. This is called at driver unload time
-	 * through drm_mode_config_cleanup(). It can also be called at runtime
-	 * when a connector is being hot-unplugged for drivers that support
-	 * connector hotplugging (e.g. DisplayPort MST).
-	 */
-	void (*destroy)(struct drm_connector *connector);
-
-	/**
-	 * @atomic_duplicate_state:
-	 *
-	 * Duplicate the current atomic state for this connector and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
-	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
-	 *
-	 * Atomic drivers which don't subclass struct &drm_connector_state should use
-	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
-	 * state structure to extend it with driver-private state should use
-	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
-	 * duplicated in a consistent fashion across drivers.
-	 *
-	 * It is an error to call this hook before connector->state has been
-	 * initialized correctly.
-	 *
-	 * NOTE:
-	 *
-	 * If the duplicate state references refcounted resources this hook must
-	 * acquire a reference for each of them. The driver must release these
-	 * references again in @atomic_destroy_state.
-	 *
-	 * RETURNS:
-	 *
-	 * Duplicated atomic state or NULL when the allocation failed.
-	 */
-	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
-
-	/**
-	 * @atomic_destroy_state:
-	 *
-	 * Destroy a state duplicated with @atomic_duplicate_state and release
-	 * or unreference all resources it references
-	 */
-	void (*atomic_destroy_state)(struct drm_connector *connector,
-				     struct drm_connector_state *state);
-
-	/**
-	 * @atomic_set_property:
-	 *
-	 * Decode a driver-private property value and store the decoded value
-	 * into the passed-in state structure. Since the atomic core decodes all
-	 * standardized properties (even for extensions beyond the core set of
-	 * properties which might not be implemented by all drivers) this
-	 * requires drivers to subclass the state structure.
-	 *
-	 * Such driver-private properties should really only be implemented for
-	 * truly hardware/vendor specific state. Instead it is preferred to
-	 * standardize atomic extension and decode the properties used to expose
-	 * such an extension in the core.
-	 *
-	 * Do not call this function directly, use
-	 * drm_atomic_connector_set_property() instead.
-	 *
-	 * This callback is optional if the driver does not support any
-	 * driver-private atomic properties.
-	 *
-	 * NOTE:
-	 *
-	 * This function is called in the state assembly phase of atomic
-	 * modesets, which can be aborted for any reason (including on
-	 * userspace's request to just check whether a configuration would be
-	 * possible). Drivers MUST NOT touch any persistent state (hardware or
-	 * software) or data structures except the passed in @state parameter.
-	 *
-	 * Also since userspace controls in which order properties are set this
-	 * function must not do any input validation (since the state update is
-	 * incomplete and hence likely inconsistent). Instead any such input
-	 * validation must be done in the various atomic_check callbacks.
-	 *
-	 * RETURNS:
-	 *
-	 * 0 if the property has been found, -EINVAL if the property isn't
-	 * implemented by the driver (which shouldn't ever happen, the core only
-	 * asks for properties attached to this connector). No other validation
-	 * is allowed by the driver. The core already checks that the property
-	 * value is within the range (integer, valid enum value, ...) the driver
-	 * set when registering the property.
-	 */
-	int (*atomic_set_property)(struct drm_connector *connector,
-				   struct drm_connector_state *state,
-				   struct drm_property *property,
-				   uint64_t val);
-
-	/**
-	 * @atomic_get_property:
-	 *
-	 * Reads out the decoded driver-private property. This is used to
-	 * implement the GETCONNECTOR IOCTL.
-	 *
-	 * Do not call this function directly, use
-	 * drm_atomic_connector_get_property() instead.
-	 *
-	 * This callback is optional if the driver does not support any
-	 * driver-private atomic properties.
-	 *
-	 * RETURNS:
-	 *
-	 * 0 on success, -EINVAL if the property isn't implemented by the
-	 * driver (which shouldn't ever happen, the core only asks for
-	 * properties attached to this connector).
-	 */
-	int (*atomic_get_property)(struct drm_connector *connector,
-				   const struct drm_connector_state *state,
-				   struct drm_property *property,
-				   uint64_t *val);
-};
-
-/**
  * struct drm_encoder_funcs - encoder controls
  *
  * Encoders sit between CRTCs and connectors.
@@ -1069,8 +712,6 @@ struct drm_encoder_funcs {
 	void (*early_unregister)(struct drm_encoder *encoder);
 };
 
-#define DRM_CONNECTOR_MAX_ENCODER 3
-
 /**
  * struct drm_encoder - central DRM encoder structure
  * @dev: parent DRM device
@@ -1111,171 +752,6 @@ struct drm_encoder {
 	const struct drm_encoder_helper_funcs *helper_private;
 };
 
-/* should we poll this connector for connects and disconnects */
-/* hot plug detectable */
-#define DRM_CONNECTOR_POLL_HPD (1 << 0)
-/* poll for connections */
-#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
-/* can cleanly poll for disconnections without flickering the screen */
-/* DACs should rarely do this without a lot of testing */
-#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
-
-#define MAX_ELD_BYTES	128
-
-/**
- * struct drm_connector - central DRM connector control structure
- * @dev: parent DRM device
- * @kdev: kernel device for sysfs attributes
- * @attr: sysfs attributes
- * @head: list management
- * @base: base KMS object
- * @name: human readable name, can be overwritten by the driver
- * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
- * @connector_type_id: index into connector type enum
- * @interlace_allowed: can this connector handle interlaced modes?
- * @doublescan_allowed: can this connector handle doublescan?
- * @stereo_allowed: can this connector handle stereo modes?
- * @registered: is this connector exposed (registered) with userspace?
- * @modes: modes available on this connector (from fill_modes() + user)
- * @status: one of the drm_connector_status enums (connected, not, or unknown)
- * @probed_modes: list of modes derived directly from the display
- * @display_info: information about attached display (e.g. from EDID)
- * @funcs: connector control functions
- * @edid_blob_ptr: DRM property containing EDID if present
- * @properties: property tracking for this connector
- * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
- * @dpms: current dpms state
- * @helper_private: mid-layer private data
- * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
- * @force: a DRM_FORCE_<foo> state for forced mode sets
- * @override_edid: has the EDID been overwritten through debugfs for testing?
- * @encoder_ids: valid encoders for this connector
- * @encoder: encoder driving this connector, if any
- * @eld: EDID-like data, if present
- * @dvi_dual: dual link DVI, if found
- * @max_tmds_clock: max clock rate, if found
- * @latency_present: AV delay info from ELD, if found
- * @video_latency: video latency info from ELD, if found
- * @audio_latency: audio latency info from ELD, if found
- * @null_edid_counter: track sinks that give us all zeros for the EDID
- * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
- * @edid_corrupt: indicates whether the last read EDID was corrupt
- * @debugfs_entry: debugfs directory for this connector
- * @state: current atomic state for this connector
- * @has_tile: is this connector connected to a tiled monitor
- * @tile_group: tile group for the connected monitor
- * @tile_is_single_monitor: whether the tile is one monitor housing
- * @num_h_tile: number of horizontal tiles in the tile group
- * @num_v_tile: number of vertical tiles in the tile group
- * @tile_h_loc: horizontal location of this tile
- * @tile_v_loc: vertical location of this tile
- * @tile_h_size: horizontal size of this tile.
- * @tile_v_size: vertical size of this tile.
- *
- * Each connector may be connected to one or more CRTCs, or may be clonable by
- * another connector if they can share a CRTC.  Each connector also has a specific
- * position in the broader display (referred to as a 'screen' though it could
- * span multiple monitors).
- */
-struct drm_connector {
-	struct drm_device *dev;
-	struct device *kdev;
-	struct device_attribute *attr;
-	struct list_head head;
-
-	struct drm_mode_object base;
-
-	char *name;
-
-	/**
-	 * @index: Compacted connector index, which matches the position inside
-	 * the mode_config.list for drivers not supporting hot-add/removing. Can
-	 * be used as an array index. It is invariant over the lifetime of the
-	 * connector.
-	 */
-	unsigned index;
-
-	int connector_type;
-	int connector_type_id;
-	bool interlace_allowed;
-	bool doublescan_allowed;
-	bool stereo_allowed;
-	bool registered;
-	struct list_head modes; /* list of modes on this connector */
-
-	enum drm_connector_status status;
-
-	/* these are modes added by probing with DDC or the BIOS */
-	struct list_head probed_modes;
-
-	struct drm_display_info display_info;
-	const struct drm_connector_funcs *funcs;
-
-	struct drm_property_blob *edid_blob_ptr;
-	struct drm_object_properties properties;
-
-	/**
-	 * @path_blob_ptr:
-	 *
-	 * DRM blob property data for the DP MST path property.
-	 */
-	struct drm_property_blob *path_blob_ptr;
-
-	/**
-	 * @tile_blob_ptr:
-	 *
-	 * DRM blob property data for the tile property (used mostly by DP MST).
-	 * This is meant for screens which are driven through separate display
-	 * pipelines represented by &drm_crtc, which might not be running with
-	 * genlocked clocks. For tiled panels which are genlocked, like
-	 * dual-link LVDS or dual-link DSI, the driver should try to not expose
-	 * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
-	 */
-	struct drm_property_blob *tile_blob_ptr;
-
-	uint8_t polled; /* DRM_CONNECTOR_POLL_* */
-
-	/* requested DPMS state */
-	int dpms;
-
-	const struct drm_connector_helper_funcs *helper_private;
-
-	/* forced on connector */
-	struct drm_cmdline_mode cmdline_mode;
-	enum drm_connector_force force;
-	bool override_edid;
-	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
-	struct drm_encoder *encoder; /* currently active encoder */
-
-	/* EDID bits */
-	uint8_t eld[MAX_ELD_BYTES];
-	bool dvi_dual;
-	int max_tmds_clock;	/* in MHz */
-	bool latency_present[2];
-	int video_latency[2];	/* [0]: progressive, [1]: interlaced */
-	int audio_latency[2];
-	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
-	unsigned bad_edid_counter;
-
-	/* Flag for raw EDID header corruption - used in Displayport
-	 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
-	 */
-	bool edid_corrupt;
-
-	struct dentry *debugfs_entry;
-
-	struct drm_connector_state *state;
-
-	/* DisplayID bits */
-	bool has_tile;
-	struct drm_tile_group *tile_group;
-	bool tile_is_single_monitor;
-
-	uint8_t num_h_tile, num_v_tile;
-	uint8_t tile_h_loc, tile_v_loc;
-	uint16_t tile_h_size, tile_v_size;
-};
-
 /**
  * struct drm_plane_state - mutable plane state
  * @plane: backpointer to the plane
@@ -2615,7 +2091,6 @@ struct drm_mode_config {
 		for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
 
 #define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
-#define obj_to_connector(x) container_of(x, struct drm_connector, base)
 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
 #define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
 #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
@@ -2661,19 +2136,6 @@ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc)
 	return 1 << drm_crtc_index(crtc);
 }
 
-int drm_connector_init(struct drm_device *dev,
-		       struct drm_connector *connector,
-		       const struct drm_connector_funcs *funcs,
-		       int connector_type);
-int drm_connector_register(struct drm_connector *connector);
-void drm_connector_unregister(struct drm_connector *connector);
-
-extern void drm_connector_cleanup(struct drm_connector *connector);
-static inline unsigned drm_connector_index(struct drm_connector *connector)
-{
-	return connector->index;
-}
-
 extern __printf(5, 6)
 int drm_encoder_init(struct drm_device *dev,
 		     struct drm_encoder *encoder,
@@ -2742,23 +2204,10 @@ extern int drm_crtc_force_disable_all(struct drm_device *dev);
 
 extern void drm_encoder_cleanup(struct drm_encoder *encoder);
 
-extern const char *drm_get_connector_status_name(enum drm_connector_status status);
-extern const char *drm_get_subpixel_order_name(enum subpixel_order order);
-extern const char *drm_get_dpms_name(int val);
-extern const char *drm_get_dvi_i_subconnector_name(int val);
-extern const char *drm_get_dvi_i_select_name(int val);
-extern const char *drm_get_tv_subconnector_name(int val);
-extern const char *drm_get_tv_select_name(int val);
 extern void drm_mode_config_init(struct drm_device *dev);
 extern void drm_mode_config_reset(struct drm_device *dev);
 extern void drm_mode_config_cleanup(struct drm_device *dev);
 
-extern int drm_mode_connector_set_path_property(struct drm_connector *connector,
-						const char *path);
-int drm_mode_connector_set_tile_property(struct drm_connector *connector);
-extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
-						   const struct edid *edid);
-
 extern int drm_display_info_set_bus_formats(struct drm_display_info *info,
 					    const u32 *formats,
 					    unsigned int num_formats);
@@ -2819,16 +2268,6 @@ void drm_property_unreference_blob(struct drm_property_blob *blob);
 extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
 extern int drm_property_add_enum(struct drm_property *property, int index,
 				 uint64_t value, const char *name);
-extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
-extern int drm_mode_create_tv_properties(struct drm_device *dev,
-					 unsigned int num_modes,
-					 const char * const modes[]);
-extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
-extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
-extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
-
-extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
-					     struct drm_encoder *encoder);
 extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 					 int gamma_size);
 
@@ -2888,22 +2327,6 @@ static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
 	return mo ? obj_to_encoder(mo) : NULL;
 }
 
-/**
- * drm_connector_lookup - lookup connector object
- * @dev: DRM device
- * @id: connector object id
- *
- * This function looks up the connector object specified by id
- * add takes a reference to it.
- */
-static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
-		uint32_t id)
-{
-	struct drm_mode_object *mo;
-	mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
-	return mo ? obj_to_connector(mo) : NULL;
-}
-
 static inline struct drm_property *drm_property_find(struct drm_device *dev,
 		uint32_t id)
 {
@@ -2931,28 +2354,6 @@ static inline uint32_t drm_color_lut_extract(uint32_t user_input,
 	return clamp_val(val, 0, max);
 }
 
-/**
- * drm_connector_reference - incr the connector refcnt
- * @connector: connector
- *
- * This function increments the connector's refcount.
- */
-static inline void drm_connector_reference(struct drm_connector *connector)
-{
-	drm_mode_object_reference(&connector->base);
-}
-
-/**
- * drm_connector_unreference - unref a connector
- * @connector: connector to unref
- *
- * This function decrements the connector's refcount and frees it if it drops to zero.
- */
-static inline void drm_connector_unreference(struct drm_connector *connector)
-{
-	drm_mode_object_unreference(&connector->base);
-}
-
 /* Plane list iterator for legacy (overlay only) planes. */
 #define drm_for_each_legacy_plane(plane, dev) \
 	list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index f0af1edcbefe..efd291200a2b 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -28,6 +28,7 @@
 #define __DRM_MODES_H__
 
 #include <drm/drm_modeset.h>
+#include <drm/drm_connector.h>
 
 /*
  * Note on terminology:  here, for brevity and convenience, we refer to connector
@@ -402,21 +403,6 @@ struct drm_display_mode {
 	enum hdmi_picture_aspect picture_aspect_ratio;
 };
 
-/* mode specified on the command line */
-struct drm_cmdline_mode {
-	bool specified;
-	bool refresh_specified;
-	bool bpp_specified;
-	int xres, yres;
-	int bpp;
-	int refresh;
-	bool rb;
-	bool interlace;
-	bool cvt;
-	bool margins;
-	enum drm_connector_force force;
-};
-
 /**
  * drm_mode_is_stereo - check for stereo mode flags
  * @mode: drm_display_mode to check
diff --git a/include/drm/drm_modeset.h b/include/drm/drm_modeset.h
index 0c2b0f3c5f34..fe910d5efe12 100644
--- a/include/drm/drm_modeset.h
+++ b/include/drm/drm_modeset.h
@@ -25,6 +25,7 @@
 
 #include <linux/kref.h>
 struct drm_object_properties;
+struct drm_property;
 
 struct drm_mode_object {
 	uint32_t id;
@@ -34,17 +35,36 @@ struct drm_mode_object {
 	void (*free_cb)(struct kref *kref);
 };
 
+#define DRM_OBJECT_MAX_PROPERTY 24
+struct drm_object_properties {
+	int count, atomic_count;
+	/* NOTE: if we ever start dynamically destroying properties (ie.
+	 * not at drm_mode_config_cleanup() time), then we'd have to do
+	 * a better job of detaching property from mode objects to avoid
+	 * dangling property pointers:
+	 */
+	struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
+	/* do not read/write values directly, but use drm_object_property_get_value()
+	 * and drm_object_property_set_value():
+	 */
+	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
+};
+
+/* Avoid boilerplate.  I'm tired of typing. */
+#define DRM_ENUM_NAME_FN(fnname, list)				\
+	const char *fnname(int val)				\
+	{							\
+		int i;						\
+		for (i = 0; i < ARRAY_SIZE(list); i++) {	\
+			if (list[i].type == val)		\
+				return list[i].name;		\
+		}						\
+		return "(unknown)";				\
+	}
+
 struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
 					     uint32_t id, uint32_t type);
 void drm_mode_object_reference(struct drm_mode_object *obj);
 void drm_mode_object_unreference(struct drm_mode_object *obj);
 
-/* FIXME: This is temporary until we have a drm_connector.h */
-enum drm_connector_force {
-	DRM_FORCE_UNSPECIFIED,
-	DRM_FORCE_OFF,
-	DRM_FORCE_ON,         /* force on analog part normally */
-	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
-};
-
 #endif
