diff mbox

[v2,5/5] ARM: dts: da850-lcdk: add tilcdc panel node

Message ID 1477925138-23457-6-git-send-email-bgolaszewski@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartosz Golaszewski Oct. 31, 2016, 2:45 p.m. UTC
The tilcdc driver is not yet ready for working together with the
dumb-vga-dac drm bridge. While the work on enabling drm_bridge
support in tilcdc continues, enable the VGA connector on da850-lcdk
with the following workaround: use the tilcdc-panel driver with
a set of common (and tested) resolutions.

Once the drm bridge support is complete, we'll remove the node added
by this patch and use the correct solution. This change will be
transparent for the user.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 63 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

Comments

Sekhar Nori Nov. 1, 2016, 10:26 a.m. UTC | #1
On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote:
> The tilcdc driver is not yet ready for working together with the
> dumb-vga-dac drm bridge. While the work on enabling drm_bridge
> support in tilcdc continues, enable the VGA connector on da850-lcdk
> with the following workaround: use the tilcdc-panel driver with
> a set of common (and tested) resolutions.
> 
> Once the drm bridge support is complete, we'll remove the node added
> by this patch and use the correct solution. This change will be
> transparent for the user.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

I dont think this can be applied. If this goes in v4.10, then the DT
blob becomes an ABI and driver will have to support tilcdc-panel driver
for DA850 forever.

Its probably better to wait for the proper driver support to arrive.

Thanks,
Sekhar
Tomi Valkeinen Nov. 1, 2016, 10:38 a.m. UTC | #2
On 01/11/16 12:26, Sekhar Nori wrote:
> On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote:
>> The tilcdc driver is not yet ready for working together with the
>> dumb-vga-dac drm bridge. While the work on enabling drm_bridge
>> support in tilcdc continues, enable the VGA connector on da850-lcdk
>> with the following workaround: use the tilcdc-panel driver with
>> a set of common (and tested) resolutions.
>>
>> Once the drm bridge support is complete, we'll remove the node added
>> by this patch and use the correct solution. This change will be
>> transparent for the user.
>>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> I dont think this can be applied. If this goes in v4.10, then the DT
> blob becomes an ABI and driver will have to support tilcdc-panel driver
> for DA850 forever.
> 
> Its probably better to wait for the proper driver support to arrive.

Agreed, NAK for this.

 Tomi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index b39796e..df582c6 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -62,6 +62,65 @@ 
 		regulator-max-microvolt = <5000000>;
 	};
 
+	/*
+	 * Remove this node once the tilcdc driver gets support for
+	 * drm bridge modules.
+	 */
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		status = "okay";
+
+		panel-info {
+			ac-bias = <0>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <255>;
+			sync-edge = <0>;
+			sync-ctrl = <0>;
+			raster-order = <0>;
+			fifo-th = <5>;
+		};
+
+		display-timings {
+			native-mode = <&svga_timings>;
+			vga_timings: 640x480@60 {
+				clock-frequency = <27500000>;
+				hactive = <640>;
+				hback-porch = <90>;
+				hfront-porch = <40>;
+				hsync-len = <128>;
+				vactive = <480>;
+				vback-porch = <23>;
+				vfront-porch = <1>;
+				vsync-len = <4>;
+			};
+			vga_timings_hf: 640x480@75 {
+				clock-frequency = <34000000>;
+				hactive = <640>;
+				hback-porch = <90>;
+				hfront-porch = <40>;
+				hsync-len = <128>;
+				vactive = <480>;
+				vback-porch = <23>;
+				vfront-porch = <1>;
+				vsync-len = <4>;
+			};
+			svga_timings: 800x600@56 {
+				clock-frequency = <37500000>;
+				hactive = <800>;
+				hback-porch = <140>;
+				hfront-porch = <40>;
+				hsync-len = <128>;
+				vactive = <600>;
+				vback-porch = <23>;
+				vfront-porch = <1>;
+				vsync-len = <4>;
+			};
+		};
+	};
 };
 
 &pmx_core {
@@ -251,3 +310,7 @@ 
 &ddrctl {
 	status = "okay";
 };
+
+&display {
+	status = "okay";
+};