diff mbox

[RFC,3/5,v3] drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection

Message ID 1481576441-23529-4-git-send-email-john.stultz@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

John Stultz Dec. 12, 2016, 9 p.m. UTC 
From: Archit Taneja <architt@codeaurora.org>

On some adv7511 implementations, we can get some spurious
disconnect signals which can cause monitor probing to fail.

This patch enables HPD (hot plug detect) interrupt support
which allows the monitor to be properly re-initialized when
the spurious disconnect signal goes away.

This also enables proper hotplug support.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Originally-by: Archit Taneja <architt@codeaurora.org>
[jstultz: Added proper commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index d93d66f..4b90975 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -338,7 +338,7 @@  static void adv7511_power_on(struct adv7511 *adv7511)
 		 * Still, let's be safe and stick to the documentation.
 		 */
 		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-			     ADV7511_INT0_EDID_READY);
+			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
 		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
 			     ADV7511_INT1_DDC_ERROR);
 	}
@@ -846,6 +846,10 @@  static int adv7511_bridge_attach(struct drm_bridge *bridge)
 	if (adv->type == ADV7533)
 		ret = adv7533_attach_dsi(adv);
 
+	if (adv->i2c_main->irq)
+		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
+				ADV7511_INT0_HPD);
+
 	return ret;
 }