| Message ID | 1489562353-10313-1-git-send-email-zyw@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 15, 2017 at 03:19:12PM +0800, Chris Zhong wrote: > The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and > connected to DSI using four lanes. > > Signed-off-by: Chris Zhong <zyw@rock-chips.com> > --- > > Changes in v2: None You added documentation for the 'reg' property :) Looks OK to me. Reviewed-by: Brian Norris <briannorris@chromium.org> > > .../bindings/display/panel/innolux,p079zca.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt > new file mode 100644 > index 0000000..5c70a83 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt > @@ -0,0 +1,23 @@ > +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel > + > +Required properties: > +- compatible: should be "innolux,p079zca" > +- reg: DSI virtual channel of the peripheral > +- power-supply: phandle of the regulator that provides the supply voltage > +- enable-gpios: panel enable gpio > + > +Optional properties: > +- backlight: phandle of the backlight device attached to the panel > + > +Example: > + > + &mipi_dsi { > + panel { > + compatible = "innolux,p079zca"; > + reg = <0>; > + power-supply = <...>; > + backlight = <&backlight>; > + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + }; > + }; > -- > 2.6.3
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt new file mode 100644 index 0000000..5c70a83 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -0,0 +1,23 @@ +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + +Required properties: +- compatible: should be "innolux,p079zca" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel { + compatible = "innolux,p079zca"; + reg = <0>; + power-supply = <...>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + };
The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and connected to DSI using four lanes. Signed-off-by: Chris Zhong <zyw@rock-chips.com> --- Changes in v2: None .../bindings/display/panel/innolux,p079zca.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt