| Message ID | 1490109950-21421-10-git-send-email-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/21/2017 04:25 PM, Neil Armstrong wrote: > Add HDMI output and connector nodes. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 ++++++++++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 32 ++++++++++++++++++ > .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 23 +++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 23 +++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 12 +++++++ > .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 23 +++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 13 ++++++++ > .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 23 +++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 3 ++ > 9 files changed, 191 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > index 7a078be..a84e276 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi > @@ -98,6 +98,27 @@ > clocks = <&wifi32k>; > clock-names = "ext_clock"; > }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > }; > > /* This UART is brought out to the DB9 connector */ > @@ -188,3 +209,21 @@ > ðmac { > status = "okay"; > }; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > index 94c6f95..0dda058 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi > @@ -465,6 +465,38 @@ > cvbs_vdac_port: port@0 { > reg = <0>; > }; > + > + /* HDMI-TX output port */ > + hdmi_tx_port: port@1 { > + reg = <1>; > + > + hdmi_tx_out: endpoint { > + remote-endpoint = <&hdmi_tx_in>; > + }; > + }; > + }; > + > + hdmi_tx: hdmi-tx@c883a000 { > + compatible = "amlogic,meson-gx-dw-hdmi"; > + reg = <0x0 0xc883a000 0x0 0x1c>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + > + /* VPU VENC Input */ > + hdmi_tx_venc_port: port@0 { > + reg = <0>; > + > + hdmi_tx_in: endpoint { > + remote-endpoint = <&hdmi_tx_out>; > + }; > + }; > + > + /* TMDS Output */ > + hdmi_tx_tmds_port: port@1 { > + reg = <1>; > + }; > }; > }; > }; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > index 4cbd626..a2c999f 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts > @@ -152,6 +152,17 @@ > }; > }; > }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > }; > > &uart_AO { > @@ -245,3 +256,15 @@ > remote-endpoint = <&cvbs_connector_in>; > }; > }; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > index 4a96e0f..1c96fc8 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi > @@ -135,6 +135,17 @@ > }; > }; > }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > }; > > /* This UART is brought out to the DB9 connector */ > @@ -250,3 +261,15 @@ > remote-endpoint = <&cvbs_connector_in>; > }; > }; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > index 04b3324..9716e65 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi > @@ -524,3 +524,15 @@ > &vpu { > compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; > }; > + > +&hdmi_tx { > + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; > + resets = <&reset RESET_HDMITX_CAPB3>, > + <&reset RESET_HDMI_SYSTEM_RESET>, > + <&reset RESET_HDMI_TX>; > + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; > + clocks = <&clkc CLKID_HDMI_PCLK>, > + <&clkc CLKID_CLK81>, > + <&clkc CLKID_GCLK_VENCI_INT0>; > + clock-names = "isfr", "iahb", "venci"; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts > index cea4a3e..8873c05 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts > @@ -127,6 +127,17 @@ > }; > }; > }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > }; > > &uart_AO { > @@ -219,3 +230,15 @@ > remote-endpoint = <&cvbs_connector_in>; > }; > }; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > index fe11b5f..9dcac25 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi > @@ -44,6 +44,7 @@ > #include "meson-gx.dtsi" > #include <dt-bindings/clock/gxbb-clkc.h> > #include <dt-bindings/gpio/meson-gxl-gpio.h> > +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> > > / { > compatible = "amlogic,meson-gxl"; > @@ -381,3 +382,15 @@ > &vpu { > compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; > }; > + > +&hdmi_tx { > + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; > + resets = <&reset RESET_HDMITX_CAPB3>, > + <&reset RESET_HDMI_SYSTEM_RESET>, > + <&reset RESET_HDMI_TX>; > + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; > + clocks = <&clkc CLKID_HDMI_PCLK>, > + <&clkc CLKID_CLK81>, > + <&clkc CLKID_GCLK_VENCI_INT0>; > + clock-names = "isfr", "iahb", "venci"; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > index 5a337d3..0e68c62e 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts > @@ -100,6 +100,17 @@ > }; > }; > }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > }; > > /* This UART is brought out to the DB9 connector */ > @@ -183,3 +194,15 @@ > remote-endpoint = <&cvbs_connector_in>; > }; > }; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > index ddea730..fe451cc 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi > @@ -130,3 +130,6 @@ > compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; > }; > > +&hdmi_tx { > + compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; > +}; > Hi Kevin, Please take this one for the amlogic arm-soc DT tree. It may need a rebase, please tell me then I'll repost this one rebased on your 4.12/dt64 branch. Thanks, Neil
Neil Armstrong <narmstrong@baylibre.com> writes: > On 03/21/2017 04:25 PM, Neil Armstrong wrote: >> Add HDMI output and connector nodes. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [...] > > Hi Kevin, > > Please take this one for the amlogic arm-soc DT tree. > Applied to v4.12/dt64, Kevin
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 7a078be..a84e276 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -98,6 +98,27 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -188,3 +209,21 @@ ðmac { status = "okay"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 94c6f95..0dda058 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -465,6 +465,38 @@ cvbs_vdac_port: port@0 { reg = <0>; }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + hdmi_tx: hdmi-tx@c883a000 { + compatible = "amlogic,meson-gx-dw-hdmi"; + reg = <0x0 0xc883a000 0x0 0x1c>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cbd626..a2c999f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -152,6 +152,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -245,3 +256,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 4a96e0f..1c96fc8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -135,6 +135,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -250,3 +261,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 04b3324..9716e65 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -524,3 +524,15 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index cea4a3e..8873c05 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -127,6 +127,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -219,3 +230,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fe11b5f..9dcac25 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -44,6 +44,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> #include <dt-bindings/gpio/meson-gxl-gpio.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxl"; @@ -381,3 +382,15 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 5a337d3..0e68c62e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -100,6 +100,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -183,3 +194,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index ddea730..fe451cc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -130,3 +130,6 @@ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; }; +&hdmi_tx { + compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; +};
Add HDMI output and connector nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 ++++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 32 ++++++++++++++++++ .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 23 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 23 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 12 +++++++ .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 23 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 13 ++++++++ .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 23 +++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 3 ++ 9 files changed, 191 insertions(+)