| Message ID | 1511834125-7756-3-git-send-email-nickey.yang@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Nickey, Thanks for the quick version 2. You've fixed most of the the problems I pointed out, but you've missed at least one. On Tue, Nov 28, 2017 at 09:55:24AM +0800, Nickey Yang wrote: > Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare > MIPI DSI host controller bridge. > > Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> > --- I suppose you've included a changelog in the cover letter (thanks!), but sometimes it helps to go here too, to give an individual history of each patch. > drivers/gpu/drm/rockchip/Kconfig | 2 +- > drivers/gpu/drm/rockchip/Makefile | 2 +- > drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 ----------------------- > drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c | 756 +++++++++++++ > drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +- > drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +- > 6 files changed, 760 insertions(+), 1353 deletions(-) > delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c > create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > > diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > new file mode 100644 > index 0000000..c919d4f > --- /dev/null > +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > @@ -0,0 +1,756 @@ [...] > +static int dw_mipi_dsi_rockchip_bind(struct device *dev, > + struct device *master, > + void *data) > +{ > + const struct of_device_id *of_id = > + of_match_device(dw_mipi_dsi_rockchip_dt_ids, dev); > + const struct rockchip_dw_dsi_chip_data *cdata = of_id->data; > + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); Hmm, so I see 2 instances of 'dev_get_drvdata()' in this driver, and one of them is here. I never see a 'dev_set_drvdata()', so that can't possibly be useful. In this case...you've actually moved all the 'probe()' logic into bind(), so there's no driver data to carry over here. And instead, you just clobber this 'dsi = ...' assignment a few lines below: > + struct resource *res; > + struct platform_device *pdev = to_platform_device(dev); > + struct drm_device *drm_dev = data; > + struct device_node *np = dev->of_node; > + int ret; > + > + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); ^^^ See here. So if you don't actually need to stash anything in drvdata between probe() and bind(), then you might get away without my patch: [PATCH] drm/bridge/synopsis: stop clobbering drvdata https://patchwork.kernel.org/patch/10078493/ There's one other instance to review though: > + if (!dsi) > + return -ENOMEM; > + [...] > +static void dw_mipi_dsi_rockchip_unbind(struct device *dev, > + struct device *master, > + void *data) > +{ > + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); ^^ That's wrong. You either want to do your own 'dev_set_drvdata()' somewhere (and make sure the bridge driver doesn't clobber it, e.g., with my patch above), or else you need to convince the bridge driver to give us back something like its 'priv_data' pointer (dsi->plat_data->priv_data). Also, don't you need to call dw_mipi_dsi_unbind() here? > + clk_disable_unprepare(dsi->pllref_clk); > +} > + > +static const struct component_ops dw_mipi_dsi_rockchip_ops = { > + .bind = dw_mipi_dsi_rockchip_bind, > + .unbind = dw_mipi_dsi_rockchip_unbind, > +}; ... Brian
Hi, Thanks a lot for working on this. Some comments below. On 11/28/2017 07:25 AM, Nickey Yang wrote: > Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare > MIPI DSI host controller bridge. > > Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> > --- > drivers/gpu/drm/rockchip/Kconfig | 2 +- > drivers/gpu/drm/rockchip/Makefile | 2 +- > drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 ----------------------- > drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c | 756 +++++++++++++ > drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +- > drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +- > 6 files changed, 760 insertions(+), 1353 deletions(-) > delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c > create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > > diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig > index 0ccc762..9eb4795 100644 > --- a/drivers/gpu/drm/rockchip/Kconfig > +++ b/drivers/gpu/drm/rockchip/Kconfig > @@ -7,7 +7,7 @@ config DRM_ROCKCHIP > select VIDEOMODE_HELPERS > select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP > select DRM_DW_HDMI if ROCKCHIP_DW_HDMI > - select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI > + select DRM_DW_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI > select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC > help > Choose this option if you have a Rockchip soc chipset. > diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile > index a314e21..c05fe47 100644 > --- a/drivers/gpu/drm/rockchip/Makefile > +++ b/drivers/gpu/drm/rockchip/Makefile > @@ -11,7 +11,7 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o > rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o > rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o > rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o > -rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o > +rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi_rockchip.o > rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o > rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o > > diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c > deleted file mode 100644 > index b15755b..0000000 > --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c > +++ /dev/null > @@ -1,1349 +0,0 @@ > -/* > - * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License as published by > - * the Free Software Foundation; either version 2 of the License, or > - * (at your option) any later version. > - */ > -#include <linux/clk.h> > -#include <linux/component.h> > -#include <linux/iopoll.h> > -#include <linux/math64.h> > -#include <linux/module.h> > -#include <linux/of_device.h> > -#include <linux/pm_runtime.h> > -#include <linux/regmap.h> > -#include <linux/reset.h> > -#include <linux/mfd/syscon.h> > -#include <drm/drm_atomic_helper.h> > -#include <drm/drm_crtc.h> > -#include <drm/drm_crtc_helper.h> > -#include <drm/drm_mipi_dsi.h> > -#include <drm/drm_of.h> > -#include <drm/drm_panel.h> > -#include <drm/drmP.h> > -#include <video/mipi_display.h> > - > -#include "rockchip_drm_drv.h" > -#include "rockchip_drm_vop.h" > - > -#define DRIVER_NAME "dw-mipi-dsi" > - > -#define RK3288_GRF_SOC_CON6 0x025c > -#define RK3288_DSI0_SEL_VOP_LIT BIT(6) > -#define RK3288_DSI1_SEL_VOP_LIT BIT(9) > - > -#define RK3399_GRF_SOC_CON20 0x6250 > -#define RK3399_DSI0_SEL_VOP_LIT BIT(0) > -#define RK3399_DSI1_SEL_VOP_LIT BIT(4) > - > -/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ > -#define RK3399_GRF_SOC_CON22 0x6258 > -#define RK3399_GRF_DSI_MODE 0xffff0000 > - > -#define DSI_VERSION 0x00 > -#define DSI_PWR_UP 0x04 > -#define RESET 0 > -#define POWERUP BIT(0) > - > -#define DSI_CLKMGR_CFG 0x08 > -#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8) > -#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0) > - > -#define DSI_DPI_VCID 0x0c > -#define DPI_VID(vid) (((vid) & 0x3) << 0) > - > -#define DSI_DPI_COLOR_CODING 0x10 > -#define EN18_LOOSELY BIT(8) > -#define DPI_COLOR_CODING_16BIT_1 0x0 > -#define DPI_COLOR_CODING_16BIT_2 0x1 > -#define DPI_COLOR_CODING_16BIT_3 0x2 > -#define DPI_COLOR_CODING_18BIT_1 0x3 > -#define DPI_COLOR_CODING_18BIT_2 0x4 > -#define DPI_COLOR_CODING_24BIT 0x5 > - > -#define DSI_DPI_CFG_POL 0x14 > -#define COLORM_ACTIVE_LOW BIT(4) > -#define SHUTD_ACTIVE_LOW BIT(3) > -#define HSYNC_ACTIVE_LOW BIT(2) > -#define VSYNC_ACTIVE_LOW BIT(1) > -#define DATAEN_ACTIVE_LOW BIT(0) > - > -#define DSI_DPI_LP_CMD_TIM 0x18 > -#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16) > -#define INVACT_LPCMD_TIME(p) ((p) & 0xff) > - > -#define DSI_DBI_CFG 0x20 > -#define DSI_DBI_CMDSIZE 0x28 > - > -#define DSI_PCKHDL_CFG 0x2c > -#define EN_CRC_RX BIT(4) > -#define EN_ECC_RX BIT(3) > -#define EN_BTA BIT(2) > -#define EN_EOTP_RX BIT(1) > -#define EN_EOTP_TX BIT(0) > - > -#define DSI_MODE_CFG 0x34 > -#define ENABLE_VIDEO_MODE 0 > -#define ENABLE_CMD_MODE BIT(0) > - > -#define DSI_VID_MODE_CFG 0x38 > -#define FRAME_BTA_ACK BIT(14) > -#define ENABLE_LOW_POWER (0x3f << 8) > -#define ENABLE_LOW_POWER_MASK (0x3f << 8) > -#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES 0x0 > -#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1 > -#define VID_MODE_TYPE_BURST 0x2 > -#define VID_MODE_TYPE_MASK 0x3 > - > -#define DSI_VID_PKT_SIZE 0x3c > -#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0) > -#define VID_PKT_MAX_SIZE 0x3fff > - > -#define DSI_VID_HSA_TIME 0x48 > -#define DSI_VID_HBP_TIME 0x4c > -#define DSI_VID_HLINE_TIME 0x50 > -#define DSI_VID_VSA_LINES 0x54 > -#define DSI_VID_VBP_LINES 0x58 > -#define DSI_VID_VFP_LINES 0x5c > -#define DSI_VID_VACTIVE_LINES 0x60 > -#define DSI_CMD_MODE_CFG 0x68 > -#define MAX_RD_PKT_SIZE_LP BIT(24) > -#define DCS_LW_TX_LP BIT(19) > -#define DCS_SR_0P_TX_LP BIT(18) > -#define DCS_SW_1P_TX_LP BIT(17) > -#define DCS_SW_0P_TX_LP BIT(16) > -#define GEN_LW_TX_LP BIT(14) > -#define GEN_SR_2P_TX_LP BIT(13) > -#define GEN_SR_1P_TX_LP BIT(12) > -#define GEN_SR_0P_TX_LP BIT(11) > -#define GEN_SW_2P_TX_LP BIT(10) > -#define GEN_SW_1P_TX_LP BIT(9) > -#define GEN_SW_0P_TX_LP BIT(8) > -#define EN_ACK_RQST BIT(1) > -#define EN_TEAR_FX BIT(0) > - > -#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \ > - DCS_LW_TX_LP | \ > - DCS_SR_0P_TX_LP | \ > - DCS_SW_1P_TX_LP | \ > - DCS_SW_0P_TX_LP | \ > - GEN_LW_TX_LP | \ > - GEN_SR_2P_TX_LP | \ > - GEN_SR_1P_TX_LP | \ > - GEN_SR_0P_TX_LP | \ > - GEN_SW_2P_TX_LP | \ > - GEN_SW_1P_TX_LP | \ > - GEN_SW_0P_TX_LP) > - > -#define DSI_GEN_HDR 0x6c > -#define GEN_HDATA(data) (((data) & 0xffff) << 8) > -#define GEN_HDATA_MASK (0xffff << 8) > -#define GEN_HTYPE(type) (((type) & 0xff) << 0) > -#define GEN_HTYPE_MASK 0xff > - > -#define DSI_GEN_PLD_DATA 0x70 > - > -#define DSI_CMD_PKT_STATUS 0x74 > -#define GEN_CMD_EMPTY BIT(0) > -#define GEN_CMD_FULL BIT(1) > -#define GEN_PLD_W_EMPTY BIT(2) > -#define GEN_PLD_W_FULL BIT(3) > -#define GEN_PLD_R_EMPTY BIT(4) > -#define GEN_PLD_R_FULL BIT(5) > -#define GEN_RD_CMD_BUSY BIT(6) > - > -#define DSI_TO_CNT_CFG 0x78 > -#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16) > -#define LPRX_TO_CNT(p) ((p) & 0xffff) > - > -#define DSI_BTA_TO_CNT 0x8c > -#define DSI_LPCLK_CTRL 0x94 > -#define AUTO_CLKLANE_CTRL BIT(1) > -#define PHY_TXREQUESTCLKHS BIT(0) > - > -#define DSI_PHY_TMR_LPCLK_CFG 0x98 > -#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16) > -#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff) > - > -#define DSI_PHY_TMR_CFG 0x9c > -#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24) > -#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16) > -#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff) > - > -#define DSI_PHY_RSTZ 0xa0 > -#define PHY_DISFORCEPLL 0 > -#define PHY_ENFORCEPLL BIT(3) > -#define PHY_DISABLECLK 0 > -#define PHY_ENABLECLK BIT(2) > -#define PHY_RSTZ 0 > -#define PHY_UNRSTZ BIT(1) > -#define PHY_SHUTDOWNZ 0 > -#define PHY_UNSHUTDOWNZ BIT(0) > - > -#define DSI_PHY_IF_CFG 0xa4 > -#define N_LANES(n) ((((n) - 1) & 0x3) << 0) > -#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8) > - > -#define DSI_PHY_STATUS 0xb0 > -#define LOCK BIT(0) > -#define STOP_STATE_CLK_LANE BIT(2) > - > -#define DSI_PHY_TST_CTRL0 0xb4 > -#define PHY_TESTCLK BIT(1) > -#define PHY_UNTESTCLK 0 > -#define PHY_TESTCLR BIT(0) > -#define PHY_UNTESTCLR 0 > - > -#define DSI_PHY_TST_CTRL1 0xb8 > -#define PHY_TESTEN BIT(16) > -#define PHY_UNTESTEN 0 > -#define PHY_TESTDOUT(n) (((n) & 0xff) << 8) > -#define PHY_TESTDIN(n) (((n) & 0xff) << 0) > - > -#define DSI_INT_ST0 0xbc > -#define DSI_INT_ST1 0xc0 > -#define DSI_INT_MSK0 0xc4 > -#define DSI_INT_MSK1 0xc8 > - > -#define PHY_STATUS_TIMEOUT_US 10000 > -#define CMD_PKT_STATUS_TIMEOUT_US 20000 > - > -#define BYPASS_VCO_RANGE BIT(7) > -#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3) > -#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1) > -#define VCO_IN_CAP_CON_LOW (0x1 << 1) > -#define VCO_IN_CAP_CON_HIGH (0x2 << 1) > -#define REF_BIAS_CUR_SEL BIT(0) > - > -#define CP_CURRENT_3MA BIT(3) > -#define CP_PROGRAM_EN BIT(7) > -#define LPF_PROGRAM_EN BIT(6) > -#define LPF_RESISTORS_20_KOHM 0 > - > -#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1) > - > -#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f) > -#define LOW_PROGRAM_EN 0 > -#define HIGH_PROGRAM_EN BIT(7) > -#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f) > -#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0x1f) > -#define PLL_LOOP_DIV_EN BIT(5) > -#define PLL_INPUT_DIV_EN BIT(4) > - > -#define POWER_CONTROL BIT(6) > -#define INTERNAL_REG_CURRENT BIT(3) > -#define BIAS_BLOCK_ON BIT(2) > -#define BANDGAP_ON BIT(0) > - > -#define TER_RESISTOR_HIGH BIT(7) > -#define TER_RESISTOR_LOW 0 > -#define LEVEL_SHIFTERS_ON BIT(6) > -#define TER_CAL_DONE BIT(5) > -#define SETRD_MAX (0x7 << 2) > -#define POWER_MANAGE BIT(1) > -#define TER_RESISTORS_ON BIT(0) > - > -#define BIASEXTR_SEL(val) ((val) & 0x7) > -#define BANDGAP_SEL(val) ((val) & 0x7) > -#define TLP_PROGRAM_EN BIT(7) > -#define THS_PRE_PROGRAM_EN BIT(7) > -#define THS_ZERO_PROGRAM_EN BIT(6) > - > -#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0) > -#define DW_MIPI_NEEDS_GRF_CLK BIT(1) > - > -enum { > - BANDGAP_97_07, > - BANDGAP_98_05, > - BANDGAP_99_02, > - BANDGAP_100_00, > - BANDGAP_93_17, > - BANDGAP_94_15, > - BANDGAP_95_12, > - BANDGAP_96_10, > -}; > - > -enum { > - BIASEXTR_87_1, > - BIASEXTR_91_5, > - BIASEXTR_95_9, > - BIASEXTR_100, > - BIASEXTR_105_94, > - BIASEXTR_111_88, > - BIASEXTR_118_8, > - BIASEXTR_127_7, > -}; > - > -struct dw_mipi_dsi_plat_data { > - u32 dsi0_en_bit; > - u32 dsi1_en_bit; > - u32 grf_switch_reg; > - u32 grf_dsi0_mode; > - u32 grf_dsi0_mode_reg; > - unsigned int flags; > - unsigned int max_data_lanes; > -}; > - > -struct dw_mipi_dsi { > - struct drm_encoder encoder; > - struct drm_connector connector; > - struct mipi_dsi_host dsi_host; > - struct drm_panel *panel; > - struct device *dev; > - struct regmap *grf_regmap; > - void __iomem *base; > - > - struct clk *grf_clk; > - struct clk *pllref_clk; > - struct clk *pclk; > - struct clk *phy_cfg_clk; > - > - int dpms_mode; > - unsigned int lane_mbps; /* per lane */ > - u32 channel; > - u32 lanes; > - u32 format; > - u16 input_div; > - u16 feedback_div; > - unsigned long mode_flags; > - > - const struct dw_mipi_dsi_plat_data *pdata; > -}; > - > -enum dw_mipi_dsi_mode { > - DW_MIPI_DSI_CMD_MODE, > - DW_MIPI_DSI_VID_MODE, > -}; > - > -struct dphy_pll_testdin_map { > - unsigned int max_mbps; > - u8 testdin; > -}; > - > -/* The table is based on 27MHz DPHY pll reference clock. */ > -static const struct dphy_pll_testdin_map dptdin_map[] = { > - { 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01}, > - { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12}, > - { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23}, > - { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15}, > - { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07}, > - { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09}, > - { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a}, > - {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b}, > - {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c}, > - {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} > -}; > - > -static int max_mbps_to_testdin(unsigned int max_mbps) > -{ > - int i; > - > - for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) > - if (dptdin_map[i].max_mbps > max_mbps) > - return dptdin_map[i].testdin; > - > - return -EINVAL; > -} > - > -/* > - * The controller should generate 2 frames before > - * preparing the peripheral. > - */ > -static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode) > -{ > - int refresh, two_frames; > - > - refresh = drm_mode_vrefresh(mode); > - two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2; > - msleep(two_frames); > -} > - > -static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host) > -{ > - return container_of(host, struct dw_mipi_dsi, dsi_host); > -} > - > -static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con) > -{ > - return container_of(con, struct dw_mipi_dsi, connector); > -} > - > -static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder *encoder) > -{ > - return container_of(encoder, struct dw_mipi_dsi, encoder); > -} > - > -static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val) > -{ > - writel(val, dsi->base + reg); > -} > - > -static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg) > -{ > - return readl(dsi->base + reg); > -} > - > -static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code, > - u8 test_data) > -{ > - /* > - * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content > - * is latched internally as the current test code. Test data is > - * programmed internally by rising edge on TESTCLK. > - */ > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > - > - dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | > - PHY_TESTDIN(test_code)); > - > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); > - > - dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | > - PHY_TESTDIN(test_data)); > - > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > -} > - > -/** > - * ns2bc - Nanoseconds to byte clock cycles > - */ > -static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns) > -{ > - return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); > -} > - > -/** > - * ns2ui - Nanoseconds to UI time periods > - */ > -static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns) > -{ > - return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); > -} > - > -static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) > -{ > - int ret, testdin, vco, val; > - > - vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; > - > - testdin = max_mbps_to_testdin(dsi->lane_mbps); > - if (testdin < 0) { > - DRM_DEV_ERROR(dsi->dev, > - "failed to get testdin for %dmbps lane clock\n", > - dsi->lane_mbps); > - return testdin; > - } > - > - /* Start by clearing PHY state */ > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR); > - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); > - > - ret = clk_prepare_enable(dsi->phy_cfg_clk); > - if (ret) { > - DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); > - return ret; > - } > - > - dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE | > - VCO_RANGE_CON_SEL(vco) | > - VCO_IN_CAP_CON_LOW | > - REF_BIAS_CUR_SEL); > - > - dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA); > - dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN | > - LPF_RESISTORS_20_KOHM); > - > - dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin)); > - > - dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div)); > - dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) | > - LOW_PROGRAM_EN); > - dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) | > - HIGH_PROGRAM_EN); > - dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); > - > - dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN | > - BIASEXTR_SEL(BIASEXTR_127_7)); > - dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN | > - BANDGAP_SEL(BANDGAP_96_10)); > - > - dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT | > - BIAS_BLOCK_ON | BANDGAP_ON); > - > - dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE | > - SETRD_MAX | TER_RESISTORS_ON); > - dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON | > - SETRD_MAX | POWER_MANAGE | > - TER_RESISTORS_ON); > - > - dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500)); > - dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); > - dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); > - dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); > - dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100)); > - dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7)); > - > - dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500)); > - dw_mipi_dsi_phy_write(dsi, 0x71, > - THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5)); > - dw_mipi_dsi_phy_write(dsi, 0x72, > - THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); > - dw_mipi_dsi_phy_write(dsi, 0x73, > - THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); > - dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100)); > - > - dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK | > - PHY_UNRSTZ | PHY_UNSHUTDOWNZ); > - > - ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, > - val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US); > - if (ret < 0) { > - DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n"); > - goto phy_init_end; > - } > - > - ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, > - val, val & STOP_STATE_CLK_LANE, 1000, > - PHY_STATUS_TIMEOUT_US); > - if (ret < 0) > - DRM_DEV_ERROR(dsi->dev, > - "failed to wait for phy clk lane stop state\n"); > - > -phy_init_end: > - clk_disable_unprepare(dsi->phy_cfg_clk); > - > - return ret; > -} > - > -static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode) > -{ > - unsigned int i, pre; > - unsigned long mpclk, pllref, tmp; > - unsigned int m = 1, n = 1, target_mbps = 1000; > - unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps; > - int bpp; > - > - bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); > - if (bpp < 0) { > - DRM_DEV_ERROR(dsi->dev, > - "failed to get bpp for pixel format %d\n", > - dsi->format); > - return bpp; > - } > - > - mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); > - if (mpclk) { > - /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ > - tmp = mpclk * (bpp / dsi->lanes) * 10 / 8; > - if (tmp < max_mbps) > - target_mbps = tmp; > - else > - DRM_DEV_ERROR(dsi->dev, > - "DPHY clock frequency is out of range\n"); > - } > - > - pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC); > - tmp = pllref; > - > - /* > - * The limits on the PLL divisor are: > - * > - * 5MHz <= (pllref / n) <= 40MHz > - * > - * we walk over these values in descreasing order so that if we hit > - * an exact match for target_mbps it is more likely that "m" will be > - * even. > - * > - * TODO: ensure that "m" is even after this loop. > - */ > - for (i = pllref / 5; i > (pllref / 40); i--) { > - pre = pllref / i; > - if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) { > - tmp = target_mbps % pre; > - n = i; > - m = target_mbps / pre; > - } > - if (tmp == 0) > - break; > - } > - > - dsi->lane_mbps = pllref / n * m; > - dsi->input_div = n; > - dsi->feedback_div = m; > - > - return 0; > -} > - > -static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host, > - struct mipi_dsi_device *device) > -{ > - struct dw_mipi_dsi *dsi = host_to_dsi(host); > - > - if (device->lanes > dsi->pdata->max_data_lanes) { > - DRM_DEV_ERROR(dsi->dev, > - "the number of data lanes(%u) is too many\n", > - device->lanes); > - return -EINVAL; > - } > - > - dsi->lanes = device->lanes; > - dsi->channel = device->channel; > - dsi->format = device->format; > - dsi->mode_flags = device->mode_flags; > - dsi->panel = of_drm_find_panel(device->dev.of_node); > - if (dsi->panel) > - return drm_panel_attach(dsi->panel, &dsi->connector); > - > - return -EINVAL; > -} > - > -static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host, > - struct mipi_dsi_device *device) > -{ > - struct dw_mipi_dsi *dsi = host_to_dsi(host); > - > - drm_panel_detach(dsi->panel); > - > - return 0; > -} > - > -static void dw_mipi_message_config(struct dw_mipi_dsi *dsi, > - const struct mipi_dsi_msg *msg) > -{ > - bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM; > - u32 val = 0; > - > - if (msg->flags & MIPI_DSI_MSG_REQ_ACK) > - val |= EN_ACK_RQST; > - if (lpm) > - val |= CMD_MODE_ALL_LP; > - > - dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS); > - dsi_write(dsi, DSI_CMD_MODE_CFG, val); > -} > - > -static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val) > -{ > - int ret; > - u32 val, mask; > - > - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, > - val, !(val & GEN_CMD_FULL), 1000, > - CMD_PKT_STATUS_TIMEOUT_US); > - if (ret < 0) { > - DRM_DEV_ERROR(dsi->dev, > - "failed to get available command FIFO\n"); > - return ret; > - } > - > - dsi_write(dsi, DSI_GEN_HDR, hdr_val); > - > - mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY; > - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, > - val, (val & mask) == mask, > - 1000, CMD_PKT_STATUS_TIMEOUT_US); > - if (ret < 0) { > - DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n"); > - return ret; > - } > - > - return 0; > -} > - > -static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi, > - const struct mipi_dsi_msg *msg) > -{ > - const u8 *tx_buf = msg->tx_buf; > - u16 data = 0; > - u32 val; > - > - if (msg->tx_len > 0) > - data |= tx_buf[0]; > - if (msg->tx_len > 1) > - data |= tx_buf[1] << 8; > - > - if (msg->tx_len > 2) { > - DRM_DEV_ERROR(dsi->dev, > - "too long tx buf length %zu for short write\n", > - msg->tx_len); > - return -EINVAL; > - } > - > - val = GEN_HDATA(data) | GEN_HTYPE(msg->type); > - return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val); > -} > - > -static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi, > - const struct mipi_dsi_msg *msg) > -{ > - const u8 *tx_buf = msg->tx_buf; > - int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret; > - u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type); > - u32 remainder; > - u32 val; > - > - if (msg->tx_len < 3) { > - DRM_DEV_ERROR(dsi->dev, > - "wrong tx buf length %zu for long write\n", > - msg->tx_len); > - return -EINVAL; > - } > - > - while (DIV_ROUND_UP(len, pld_data_bytes)) { > - if (len < pld_data_bytes) { > - remainder = 0; > - memcpy(&remainder, tx_buf, len); > - dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); > - len = 0; > - } else { > - memcpy(&remainder, tx_buf, pld_data_bytes); > - dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); > - tx_buf += pld_data_bytes; > - len -= pld_data_bytes; > - } > - > - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, > - val, !(val & GEN_PLD_W_FULL), 1000, > - CMD_PKT_STATUS_TIMEOUT_US); > - if (ret < 0) { > - DRM_DEV_ERROR(dsi->dev, > - "failed to get available write payload FIFO\n"); > - return ret; > - } > - } > - > - return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val); > -} > - > -static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host, > - const struct mipi_dsi_msg *msg) > -{ > - struct dw_mipi_dsi *dsi = host_to_dsi(host); > - int ret; > - > - dw_mipi_message_config(dsi, msg); > - > - switch (msg->type) { > - case MIPI_DSI_DCS_SHORT_WRITE: > - case MIPI_DSI_DCS_SHORT_WRITE_PARAM: > - case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: > - ret = dw_mipi_dsi_dcs_short_write(dsi, msg); > - break; > - case MIPI_DSI_DCS_LONG_WRITE: > - ret = dw_mipi_dsi_dcs_long_write(dsi, msg); > - break; > - default: > - DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n", > - msg->type); > - ret = -EINVAL; > - } > - > - return ret; > -} > - > -static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = { > - .attach = dw_mipi_dsi_host_attach, > - .detach = dw_mipi_dsi_host_detach, > - .transfer = dw_mipi_dsi_host_transfer, > -}; > - > -static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi) > -{ > - u32 val; > - > - val = ENABLE_LOW_POWER; > - > - if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) > - val |= VID_MODE_TYPE_BURST; > - else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) > - val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES; > - else > - val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS; > - > - dsi_write(dsi, DSI_VID_MODE_CFG, val); > -} > - > -static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi, > - enum dw_mipi_dsi_mode mode) > -{ > - if (mode == DW_MIPI_DSI_CMD_MODE) { > - dsi_write(dsi, DSI_PWR_UP, RESET); > - dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); > - dsi_write(dsi, DSI_PWR_UP, POWERUP); > - } else { > - dsi_write(dsi, DSI_PWR_UP, RESET); > - dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE); > - dw_mipi_dsi_video_mode_config(dsi); > - dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS); > - dsi_write(dsi, DSI_PWR_UP, POWERUP); > - } > -} > - > -static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) > -{ > - dsi_write(dsi, DSI_PWR_UP, RESET); > - dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ); > -} > - > -static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) > -{ > - /* > - * The maximum permitted escape clock is 20MHz and it is derived from > - * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: > - * > - * (lane_mbps >> 3) / esc_clk_division < 20 > - * which is: > - * (lane_mbps >> 3) / 20 > esc_clk_division > - */ > - u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; > - > - dsi_write(dsi, DSI_PWR_UP, RESET); > - dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK > - | PHY_RSTZ | PHY_SHUTDOWNZ); > - dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) | > - TX_ESC_CLK_DIVIDSION(esc_clk_division)); > -} > - > -static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode) > -{ > - u32 val = 0, color = 0; > - > - switch (dsi->format) { > - case MIPI_DSI_FMT_RGB888: > - color = DPI_COLOR_CODING_24BIT; > - break; > - case MIPI_DSI_FMT_RGB666: > - color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY; > - break; > - case MIPI_DSI_FMT_RGB666_PACKED: > - color = DPI_COLOR_CODING_18BIT_1; > - break; > - case MIPI_DSI_FMT_RGB565: > - color = DPI_COLOR_CODING_16BIT_1; > - break; > - } > - > - if (mode->flags & DRM_MODE_FLAG_NVSYNC) > - val |= VSYNC_ACTIVE_LOW; > - if (mode->flags & DRM_MODE_FLAG_NHSYNC) > - val |= HSYNC_ACTIVE_LOW; > - > - dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel)); > - dsi_write(dsi, DSI_DPI_COLOR_CODING, color); > - dsi_write(dsi, DSI_DPI_CFG_POL, val); > - dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4) > - | INVACT_LPCMD_TIME(4)); > -} > - > -static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi) > -{ > - dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA); > -} > - > -static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode) > -{ > - dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay)); > -} > - > -static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi) > -{ > - dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000)); > - dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00); > - dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); > -} > - > -/* Get lane byte clock cycles. */ > -static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode, > - u32 hcomponent) > -{ > - u32 frac, lbcc; > - > - lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8; > - > - frac = lbcc % mode->clock; > - lbcc = lbcc / mode->clock; > - if (frac) > - lbcc++; > - > - return lbcc; > -} > - > -static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode) > -{ > - u32 htotal, hsa, hbp, lbcc; > - > - htotal = mode->htotal; > - hsa = mode->hsync_end - mode->hsync_start; > - hbp = mode->htotal - mode->hsync_end; > - > - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal); > - dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc); > - > - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa); > - dsi_write(dsi, DSI_VID_HSA_TIME, lbcc); > - > - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp); > - dsi_write(dsi, DSI_VID_HBP_TIME, lbcc); > -} > - > -static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi, > - struct drm_display_mode *mode) > -{ > - u32 vactive, vsa, vfp, vbp; > - > - vactive = mode->vdisplay; > - vsa = mode->vsync_end - mode->vsync_start; > - vfp = mode->vsync_start - mode->vdisplay; > - vbp = mode->vtotal - mode->vsync_end; > - > - dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive); > - dsi_write(dsi, DSI_VID_VSA_LINES, vsa); > - dsi_write(dsi, DSI_VID_VFP_LINES, vfp); > - dsi_write(dsi, DSI_VID_VBP_LINES, vbp); > -} > - > -static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) > -{ > - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) > - | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000)); > - > - dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40) > - | PHY_CLKLP2HS_TIME(0x40)); > -} > - > -static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi) > -{ > - dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) | > - N_LANES(dsi->lanes)); > -} > - > -static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi) > -{ > - dsi_read(dsi, DSI_INT_ST0); > - dsi_read(dsi, DSI_INT_ST1); > - dsi_write(dsi, DSI_INT_MSK0, 0); > - dsi_write(dsi, DSI_INT_MSK1, 0); > -} > - > -static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) > -{ > - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); > - > - if (dsi->dpms_mode != DRM_MODE_DPMS_ON) > - return; > - > - if (clk_prepare_enable(dsi->pclk)) { > - DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); > - return; > - } > - > - drm_panel_disable(dsi->panel); > - > - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); > - drm_panel_unprepare(dsi->panel); > - > - dw_mipi_dsi_disable(dsi); > - pm_runtime_put(dsi->dev); > - clk_disable_unprepare(dsi->pclk); > - dsi->dpms_mode = DRM_MODE_DPMS_OFF; > -} > - > -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) > -{ > - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); > - struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; > - const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata; > - int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder); > - u32 val; > - int ret; > - > - ret = dw_mipi_dsi_get_lane_bps(dsi, mode); > - if (ret < 0) > - return; > - > - if (dsi->dpms_mode == DRM_MODE_DPMS_ON) > - return; > - > - if (clk_prepare_enable(dsi->pclk)) { > - DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); > - return; > - } > - > - pm_runtime_get_sync(dsi->dev); > - dw_mipi_dsi_init(dsi); > - dw_mipi_dsi_dpi_config(dsi, mode); > - dw_mipi_dsi_packet_handler_config(dsi); > - dw_mipi_dsi_video_mode_config(dsi); > - dw_mipi_dsi_video_packet_config(dsi, mode); > - dw_mipi_dsi_command_mode_config(dsi); > - dw_mipi_dsi_line_timer_config(dsi, mode); > - dw_mipi_dsi_vertical_timing_config(dsi, mode); > - dw_mipi_dsi_dphy_timing_config(dsi); > - dw_mipi_dsi_dphy_interface_config(dsi); > - dw_mipi_dsi_clear_err(dsi); > - > - /* > - * For the RK3399, the clk of grf must be enabled before writing grf > - * register. And for RK3288 or other soc, this grf_clk must be NULL, > - * the clk_prepare_enable return true directly. > - */ > - ret = clk_prepare_enable(dsi->grf_clk); > - if (ret) { > - DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); > - return; > - } > - > - if (pdata->grf_dsi0_mode_reg) > - regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg, > - pdata->grf_dsi0_mode); > - > - dw_mipi_dsi_phy_init(dsi); > - dw_mipi_dsi_wait_for_two_frames(mode); > - > - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); > - if (drm_panel_prepare(dsi->panel)) > - DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n"); > - > - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); > - drm_panel_enable(dsi->panel); > - > - clk_disable_unprepare(dsi->pclk); > - > - if (mux) > - val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16); > - else > - val = pdata->dsi0_en_bit << 16; > - > - regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val); > - DRM_DEV_DEBUG(dsi->dev, > - "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG"); > - dsi->dpms_mode = DRM_MODE_DPMS_ON; > - > - clk_disable_unprepare(dsi->grf_clk); > -} > - > -static int > -dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, > - struct drm_crtc_state *crtc_state, > - struct drm_connector_state *conn_state) > -{ > - struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); > - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); > - > - switch (dsi->format) { > - case MIPI_DSI_FMT_RGB888: > - s->output_mode = ROCKCHIP_OUT_MODE_P888; > - break; > - case MIPI_DSI_FMT_RGB666: > - s->output_mode = ROCKCHIP_OUT_MODE_P666; > - break; > - case MIPI_DSI_FMT_RGB565: > - s->output_mode = ROCKCHIP_OUT_MODE_P565; > - break; > - default: > - WARN_ON(1); > - return -EINVAL; > - } > - > - s->output_type = DRM_MODE_CONNECTOR_DSI; > - > - return 0; > -} > - > -static const struct drm_encoder_helper_funcs > -dw_mipi_dsi_encoder_helper_funcs = { > - .enable = dw_mipi_dsi_encoder_enable, > - .disable = dw_mipi_dsi_encoder_disable, > - .atomic_check = dw_mipi_dsi_encoder_atomic_check, > -}; > - > -static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { > - .destroy = drm_encoder_cleanup, > -}; > - > -static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector) > -{ > - struct dw_mipi_dsi *dsi = con_to_dsi(connector); > - > - return drm_panel_get_modes(dsi->panel); > -} > - > -static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = { > - .get_modes = dw_mipi_dsi_connector_get_modes, > -}; > - > -static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector) > -{ > - drm_connector_unregister(connector); > - drm_connector_cleanup(connector); > -} > - > -static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = { > - .fill_modes = drm_helper_probe_single_connector_modes, > - .destroy = dw_mipi_dsi_drm_connector_destroy, > - .reset = drm_atomic_helper_connector_reset, > - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > -}; > - > -static int dw_mipi_dsi_register(struct drm_device *drm, > - struct dw_mipi_dsi *dsi) > -{ > - struct drm_encoder *encoder = &dsi->encoder; > - struct drm_connector *connector = &dsi->connector; > - struct device *dev = dsi->dev; > - int ret; > - > - encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, > - dev->of_node); > - /* > - * If we failed to find the CRTC(s) which this encoder is > - * supposed to be connected to, it's because the CRTC has > - * not been registered yet. Defer probing, and hope that > - * the required CRTC is added later. > - */ > - if (encoder->possible_crtcs == 0) > - return -EPROBE_DEFER; > - > - drm_encoder_helper_add(&dsi->encoder, > - &dw_mipi_dsi_encoder_helper_funcs); > - ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs, > - DRM_MODE_ENCODER_DSI, NULL); > - if (ret) { > - DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n"); > - return ret; > - } > - > - drm_connector_helper_add(connector, > - &dw_mipi_dsi_connector_helper_funcs); > - > - drm_connector_init(drm, &dsi->connector, > - &dw_mipi_dsi_atomic_connector_funcs, > - DRM_MODE_CONNECTOR_DSI); > - > - drm_mode_connector_attach_encoder(connector, encoder); > - > - return 0; > -} > - > -static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi) > -{ > - struct device_node *np = dsi->dev->of_node; > - > - dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); > - if (IS_ERR(dsi->grf_regmap)) { > - DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n"); > - return PTR_ERR(dsi->grf_regmap); > - } > - > - return 0; > -} > - > -static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = { > - .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, > - .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, > - .grf_switch_reg = RK3288_GRF_SOC_CON6, > - .max_data_lanes = 4, > -}; > - > -static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = { > - .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, > - .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, > - .grf_switch_reg = RK3399_GRF_SOC_CON20, > - .grf_dsi0_mode = RK3399_GRF_DSI_MODE, > - .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, > - .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, > - .max_data_lanes = 4, > -}; > - > -static const struct of_device_id dw_mipi_dsi_dt_ids[] = { > - { > - .compatible = "rockchip,rk3288-mipi-dsi", > - .data = &rk3288_mipi_dsi_drv_data, > - }, { > - .compatible = "rockchip,rk3399-mipi-dsi", > - .data = &rk3399_mipi_dsi_drv_data, > - }, > - { /* sentinel */ } > -}; > -MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids); > - > -static int dw_mipi_dsi_bind(struct device *dev, struct device *master, > - void *data) > -{ > - const struct of_device_id *of_id = > - of_match_device(dw_mipi_dsi_dt_ids, dev); > - const struct dw_mipi_dsi_plat_data *pdata = of_id->data; > - struct platform_device *pdev = to_platform_device(dev); > - struct reset_control *apb_rst; > - struct drm_device *drm = data; > - struct dw_mipi_dsi *dsi; > - struct resource *res; > - int ret; > - > - dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); > - if (!dsi) > - return -ENOMEM; > - > - dsi->dev = dev; > - dsi->pdata = pdata; > - dsi->dpms_mode = DRM_MODE_DPMS_OFF; > - > - ret = rockchip_mipi_parse_dt(dsi); > - if (ret) > - return ret; > - > - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - if (!res) > - return -ENODEV; > - > - dsi->base = devm_ioremap_resource(dev, res); > - if (IS_ERR(dsi->base)) > - return PTR_ERR(dsi->base); > - > - dsi->pllref_clk = devm_clk_get(dev, "ref"); > - if (IS_ERR(dsi->pllref_clk)) { > - ret = PTR_ERR(dsi->pllref_clk); > - DRM_DEV_ERROR(dev, > - "Unable to get pll reference clock: %d\n", ret); > - return ret; > - } > - > - dsi->pclk = devm_clk_get(dev, "pclk"); > - if (IS_ERR(dsi->pclk)) { > - ret = PTR_ERR(dsi->pclk); > - DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret); > - return ret; > - } > - > - /* > - * Note that the reset was not defined in the initial device tree, so > - * we have to be prepared for it not being found. > - */ > - apb_rst = devm_reset_control_get(dev, "apb"); > - if (IS_ERR(apb_rst)) { > - ret = PTR_ERR(apb_rst); > - if (ret == -ENOENT) { > - apb_rst = NULL; > - } else { > - DRM_DEV_ERROR(dev, > - "Unable to get reset control: %d\n", ret); > - return ret; > - } > - } > - > - if (apb_rst) { > - ret = clk_prepare_enable(dsi->pclk); > - if (ret) { > - DRM_DEV_ERROR(dev, "Failed to enable pclk\n"); > - return ret; > - } > - > - reset_control_assert(apb_rst); > - usleep_range(10, 20); > - reset_control_deassert(apb_rst); > - > - clk_disable_unprepare(dsi->pclk); > - } > - > - if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) { > - dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg"); > - if (IS_ERR(dsi->phy_cfg_clk)) { > - ret = PTR_ERR(dsi->phy_cfg_clk); > - DRM_DEV_ERROR(dev, > - "Unable to get phy_cfg_clk: %d\n", ret); > - return ret; > - } > - } > - > - if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) { > - dsi->grf_clk = devm_clk_get(dev, "grf"); > - if (IS_ERR(dsi->grf_clk)) { > - ret = PTR_ERR(dsi->grf_clk); > - DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret); > - return ret; > - } > - } > - > - ret = clk_prepare_enable(dsi->pllref_clk); > - if (ret) { > - DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n"); > - return ret; > - } > - > - ret = dw_mipi_dsi_register(drm, dsi); > - if (ret) { > - DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret); > - goto err_pllref; > - } > - > - pm_runtime_enable(dev); > - > - dsi->dsi_host.ops = &dw_mipi_dsi_host_ops; > - dsi->dsi_host.dev = dev; > - ret = mipi_dsi_host_register(&dsi->dsi_host); > - if (ret) { > - DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret); > - goto err_cleanup; > - } > - > - if (!dsi->panel) { > - ret = -EPROBE_DEFER; > - goto err_mipi_dsi_host; > - } > - > - dev_set_drvdata(dev, dsi); > - return 0; > - > -err_mipi_dsi_host: > - mipi_dsi_host_unregister(&dsi->dsi_host); > -err_cleanup: > - drm_encoder_cleanup(&dsi->encoder); > - drm_connector_cleanup(&dsi->connector); > -err_pllref: > - clk_disable_unprepare(dsi->pllref_clk); > - return ret; > -} > - > -static void dw_mipi_dsi_unbind(struct device *dev, struct device *master, > - void *data) > -{ > - struct dw_mipi_dsi *dsi = dev_get_drvdata(dev); > - > - mipi_dsi_host_unregister(&dsi->dsi_host); > - pm_runtime_disable(dev); > - clk_disable_unprepare(dsi->pllref_clk); > -} > - > -static const struct component_ops dw_mipi_dsi_ops = { > - .bind = dw_mipi_dsi_bind, > - .unbind = dw_mipi_dsi_unbind, > -}; > - > -static int dw_mipi_dsi_probe(struct platform_device *pdev) > -{ > - return component_add(&pdev->dev, &dw_mipi_dsi_ops); > -} > - > -static int dw_mipi_dsi_remove(struct platform_device *pdev) > -{ > - component_del(&pdev->dev, &dw_mipi_dsi_ops); > - return 0; > -} > - > -struct platform_driver dw_mipi_dsi_driver = { > - .probe = dw_mipi_dsi_probe, > - .remove = dw_mipi_dsi_remove, > - .driver = { > - .of_match_table = dw_mipi_dsi_dt_ids, > - .name = DRIVER_NAME, > - }, > -}; > diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > new file mode 100644 > index 0000000..c919d4f > --- /dev/null > +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c > @@ -0,0 +1,756 @@ > +/* > + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd > + * Author: > + * Chris Zhong <zyw@rock-chips.com> > + * Nickey Yang <nickey.yang@rock-chips.com> > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > + * > + * License terms: GNU General Public License (GPL), version 2 > + */ > + > +#include <linux/clk.h> > +#include <linux/iopoll.h> > +#include <linux/math64.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <drm/drmP.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/bridge/dw_mipi_dsi.h> > +#include <video/mipi_display.h> > +#include <linux/regmap.h> > +#include <drm/drm_of.h> > +#include <linux/mfd/syscon.h> > + > +#include "rockchip_drm_drv.h" > +#include "rockchip_drm_vop.h" > + > +#define DSI_PHY_TST_CTRL0 0xb4 > +#define PHY_TESTCLK BIT(1) > +#define PHY_UNTESTCLK 0 > +#define PHY_TESTCLR BIT(0) > +#define PHY_UNTESTCLR 0 > + > +#define DSI_PHY_TST_CTRL1 0xb8 > +#define PHY_TESTEN BIT(16) > +#define PHY_UNTESTEN 0 > +#define PHY_TESTDOUT(n) (((n) & 0xff) << 8) > +#define PHY_TESTDIN(n) (((n) & 0xff) << 0) > + > +#define BYPASS_VCO_RANGE BIT(7) > +#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3) > +#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1) > +#define VCO_IN_CAP_CON_LOW (0x1 << 1) > +#define VCO_IN_CAP_CON_HIGH (0x2 << 1) > +#define REF_BIAS_CUR_SEL BIT(0) > + > +#define CP_CURRENT_3UA 0x1 > +#define CP_CURRENT_4_5UA 0x2 > +#define CP_CURRENT_7_5UA 0x6 > +#define CP_CURRENT_6UA 0x9 > +#define CP_CURRENT_12UA 0xb > +#define CP_CURRENT_SEL(val) ((val) & 0xf) > +#define CP_PROGRAM_EN BIT(7) > + > +#define LPF_RESISTORS_15_5KOHM 0x1 > +#define LPF_RESISTORS_13KOHM 0x2 > +#define LPF_RESISTORS_11_5KOHM 0x4 > +#define LPF_RESISTORS_10_5KOHM 0x8 > +#define LPF_RESISTORS_8KOHM 0x10 > +#define LPF_PROGRAM_EN BIT(6) > +#define LPF_RESISTORS_SEL(val) ((val) & 0x3f) > + > +#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1) > + > +#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f) > +#define LOW_PROGRAM_EN 0 > +#define HIGH_PROGRAM_EN BIT(7) > +#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f) > +#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0xf) > +#define PLL_LOOP_DIV_EN BIT(5) > +#define PLL_INPUT_DIV_EN BIT(4) > + > +#define POWER_CONTROL BIT(6) > +#define INTERNAL_REG_CURRENT BIT(3) > +#define BIAS_BLOCK_ON BIT(2) > +#define BANDGAP_ON BIT(0) > + > +#define TER_RESISTOR_HIGH BIT(7) > +#define TER_RESISTOR_LOW 0 > +#define LEVEL_SHIFTERS_ON BIT(6) > +#define TER_CAL_DONE BIT(5) > +#define SETRD_MAX (0x7 << 2) > +#define POWER_MANAGE BIT(1) > +#define TER_RESISTORS_ON BIT(0) > + > +#define BIASEXTR_SEL(val) ((val) & 0x7) > +#define BANDGAP_SEL(val) ((val) & 0x7) > +#define TLP_PROGRAM_EN BIT(7) > +#define THS_PRE_PROGRAM_EN BIT(7) > +#define THS_ZERO_PROGRAM_EN BIT(6) > + > +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10 > +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11 > +#define PLL_LPF_AND_CP_CONTROL 0x12 > +#define PLL_INPUT_DIVIDER_RATIO 0x17 > +#define PLL_LOOP_DIVIDER_RATIO 0x18 > +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19 > +#define BANDGAP_AND_BIAS_CONTROL 0x20 > +#define TERMINATION_RESISTER_CONTROL 0x21 > +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY 0x22 > +#define HS_RX_CONTROL_OF_LANE_0 0x44 > +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL 0x60 > +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL 0x61 > +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL 0x62 > +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL 0x63 > +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL 0x64 > +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL 0x65 > +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL 0x70 > +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL 0x71 > +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL 0x72 > +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL 0x73 > +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL 0x74 > + > +#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0) > +#define DW_MIPI_NEEDS_GRF_CLK BIT(1) > + > +#define RK3288_GRF_SOC_CON6 0x025c > +#define RK3288_DSI0_SEL_VOP_LIT BIT(6) > +#define RK3288_DSI1_SEL_VOP_LIT BIT(9) > + > +#define RK3399_GRF_SOC_CON20 0x6250 > +#define RK3399_DSI0_SEL_VOP_LIT BIT(0) > +#define RK3399_DSI1_SEL_VOP_LIT BIT(4) > + > +/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ > +#define RK3399_GRF_SOC_CON22 0x6258 > +#define RK3399_GRF_DSI_MODE 0xffff0000 > + > +#define to_dsi(nm) container_of(nm, struct dw_mipi_dsi_rockchip, nm) > + > +enum { > + BANDGAP_97_07, > + BANDGAP_98_05, > + BANDGAP_99_02, > + BANDGAP_100_00, > + BANDGAP_93_17, > + BANDGAP_94_15, > + BANDGAP_95_12, > + BANDGAP_96_10, > +}; > + > +enum { > + BIASEXTR_87_1, > + BIASEXTR_91_5, > + BIASEXTR_95_9, > + BIASEXTR_100, > + BIASEXTR_105_94, > + BIASEXTR_111_88, > + BIASEXTR_118_8, > + BIASEXTR_127_7, > +}; > + > +struct rockchip_dw_dsi_chip_data { > + u32 dsi0_en_bit; > + u32 dsi1_en_bit; > + u32 grf_switch_reg; > + u32 grf_dsi0_mode; > + u32 grf_dsi0_mode_reg; > + unsigned int flags; > + unsigned int max_data_lanes; > +}; > + > +struct dw_mipi_dsi_rockchip { > + struct device *dev; > + struct drm_encoder encoder; > + void __iomem *base; > + > + struct regmap *grf_regmap; > + struct clk *pllref_clk; > + struct clk *grf_clk; > + struct clk *phy_cfg_clk; > + > + unsigned int lane_mbps; /* per lane */ > + u16 input_div; > + u16 feedback_div; > + u32 format; > + > + const struct rockchip_dw_dsi_chip_data *cdata; > + struct dw_mipi_dsi_plat_data pdata; > +}; > + > +struct dphy_pll_parameter_map { > + unsigned int max_mbps; > + u8 hsfreqrange; > + u8 icpctrl; > + u8 lpfctrl; > +}; > + > +/* The table is based on 27MHz DPHY pll reference clock. */ > +static const struct dphy_pll_parameter_map dppa_map[] = { > + { 89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, > + { 99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, > + { 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, > + { 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, > + { 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, > + { 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, > + { 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, > + { 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, > + { 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, > + { 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, > + { 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, > + { 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, > + { 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, > + { 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, > + { 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, > + { 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, > + { 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, > + {1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, > + {1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, > + {1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, > + {1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM} minor nit: you should leave a space before the closing brace '}'. > +}; > + > +static int max_mbps_to_parameter(unsigned int max_mbps) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(dppa_map); i++) > + if (dppa_map[i].max_mbps >= max_mbps) > + return i; > + > + return -EINVAL; > +} > + > +static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 val) > +{ > + writel(val, dsi->base + reg); > +} > + > +static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg) > +{ > + return readl(dsi->base + reg); > +} > + > +static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 mask) > +{ > + dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); > +} > + > +static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi, u32 reg, > + u32 mask, u32 val) > +{ > + dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); > +} > + > +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi, > + u8 test_code, > + u8 test_data) > +{ > + /* > + * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content > + * is latched internally as the current test code. Test data is > + * programmed internally by rising edge on TESTCLK. > + */ > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > + > + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | > + PHY_TESTDIN(test_code)); > + > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); > + > + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | > + PHY_TESTDIN(test_data)); > + > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > +} > + > +/** > + * ns2bc - Nanoseconds to byte clock cycles > + */ > +static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi, int ns) > +{ > + return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); > +} > + > +/** > + * ns2ui - Nanoseconds to UI time periods > + */ > +static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi, int ns) > +{ > + return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); > +} > + > +static int dw_mipi_dsi_phy_init(void *priv_data) > +{ > + struct dw_mipi_dsi_rockchip *dsi = priv_data; > + int ret, i, vco; > + > + vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; > + > + i = max_mbps_to_parameter(dsi->lane_mbps); > + if (i < 0) { > + DRM_DEV_ERROR(dsi->dev, > + "failed to get parameter for %dmbps clock\n", > + dsi->lane_mbps); > + return i; > + } > + > + ret = clk_prepare_enable(dsi->phy_cfg_clk); > + if (ret) { > + DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); > + return ret; > + } > + > + dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL, > + BYPASS_VCO_RANGE | > + VCO_RANGE_CON_SEL(vco) | > + VCO_IN_CAP_CON_LOW | > + REF_BIAS_CUR_SEL); > + > + dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS, > + CP_CURRENT_SEL(dppa_map[i].icpctrl)); > + dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL, > + CP_PROGRAM_EN | LPF_PROGRAM_EN | > + LPF_RESISTORS_SEL(dppa_map[i].lpfctrl)); > + > + dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0, > + HSFREQRANGE_SEL(dppa_map[i].hsfreqrange)); > + > + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO, > + INPUT_DIVIDER(dsi->input_div)); > + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, > + LOOP_DIV_LOW_SEL(dsi->feedback_div) | > + LOW_PROGRAM_EN); > + /* > + * We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL immediately > + * to make the configured LSB effective according to IP simulation > + * and lab test results. > + * Only in this way can we get correct mipi phy pll frequency. > + */ > + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, > + PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); > + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, > + LOOP_DIV_HIGH_SEL(dsi->feedback_div) | > + HIGH_PROGRAM_EN); > + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, > + PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); > + > + dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, > + LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7)); > + dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, > + HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10)); > + > + dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL, > + POWER_CONTROL | INTERNAL_REG_CURRENT | > + BIAS_BLOCK_ON | BANDGAP_ON); > + > + dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, > + TER_RESISTOR_LOW | TER_CAL_DONE | > + SETRD_MAX | TER_RESISTORS_ON); > + dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, > + TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON | > + SETRD_MAX | POWER_MANAGE | > + TER_RESISTORS_ON); > + > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL, > + TLP_PROGRAM_EN | ns2bc(dsi, 500)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL, > + THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL, > + THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL, > + THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL, > + BIT(5) | ns2bc(dsi, 100)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL, > + BIT(5) | (ns2bc(dsi, 60) + 7)); > + > + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL, > + TLP_PROGRAM_EN | ns2bc(dsi, 500)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL, > + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL, > + THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL, > + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); > + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL, > + BIT(5) | ns2bc(dsi, 100)); > + > + clk_disable_unprepare(dsi->phy_cfg_clk); > + > + return ret; > +} > + > +static int > +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode, > + unsigned long mode_flags, u32 lanes, u32 format, > + unsigned int *lane_mbps) > +{ > + struct dw_mipi_dsi_rockchip *dsi = priv_data; > + int bpp; > + unsigned long mpclk, tmp; > + unsigned int target_mbps = 1000; > + unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - 1].max_mbps; > + unsigned long best_freq = 0; > + unsigned long fvco_min, fvco_max, fin, fout; > + unsigned int min_prediv, max_prediv; > + unsigned int _prediv, uninitialized_var(best_prediv); > + unsigned long _fbdiv, uninitialized_var(best_fbdiv); > + unsigned long min_delta = ULONG_MAX; > + > + dsi->format = format; > + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); > + if (bpp < 0) { > + DRM_DEV_ERROR(dsi->dev, > + "failed to get bpp for pixel format %d\n", > + dsi->format); > + return bpp; > + } > + > + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); > + if (mpclk) { > + /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ > + tmp = mpclk * (bpp / lanes) * 10 / 8; > + if (tmp < max_mbps) > + target_mbps = tmp; > + else > + DRM_DEV_ERROR(dsi->dev, > + "DPHY clock frequency is out of range\n"); > + } > + > + fin = clk_get_rate(dsi->pllref_clk); > + fout = target_mbps * USEC_PER_SEC; > + > + /* constraint: 5Mhz <= Fref / N <= 40MHz */ > + min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC); > + max_prediv = fin / (5 * USEC_PER_SEC); > + > + /* constraint: 80MHz <= Fvco <= 1500Mhz */ > + fvco_min = 80 * USEC_PER_SEC; > + fvco_max = 1500 * USEC_PER_SEC; > + > + for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { > + u64 tmp; > + u32 delta; > + /* Fvco = Fref * M / N */ > + tmp = (u64)fout * _prediv; > + do_div(tmp, fin); > + _fbdiv = tmp; > + /* > + * Due to the use of a "by 2 pre-scaler," the range of the > + * feedback multiplication value M is limited to even division > + * numbers, and m must be greater than 6, less than 512. > + */ > + if (_fbdiv < 6 || _fbdiv > 512) > + continue; > + > + _fbdiv += _fbdiv % 2; > + > + tmp = (u64)_fbdiv * fin; > + do_div(tmp, _prediv); > + if (tmp < fvco_min || tmp > fvco_max) > + continue; > + > + delta = abs(fout - tmp); > + if (delta < min_delta) { > + best_prediv = _prediv; > + best_fbdiv = _fbdiv; > + min_delta = delta; > + best_freq = tmp; > + } > + } > + > + if (best_freq) { > + dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC); > + *lane_mbps = dsi->lane_mbps; > + dsi->input_div = best_prediv; > + dsi->feedback_div = best_fbdiv; > + } else { > + DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n"); > + } > + > + return 0; > +} > + > +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = { > + .init = dw_mipi_dsi_phy_init, > + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps, > +}; > + > +static struct rockchip_dw_dsi_chip_data rk3288_chip_data = { > + .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, > + .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, > + .grf_switch_reg = RK3288_GRF_SOC_CON6, > + .max_data_lanes = 4, > +}; > + > +static struct rockchip_dw_dsi_chip_data rk3399_chip_data = { > + .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, > + .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, > + .grf_switch_reg = RK3399_GRF_SOC_CON20, > + .grf_dsi0_mode = RK3399_GRF_DSI_MODE, > + .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, > + .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, > + .max_data_lanes = 4, > +}; > + > +static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = { > + { > + .compatible = "rockchip,rk3288-mipi-dsi", > + .data = &rk3288_chip_data, > + }, { > + .compatible = "rockchip,rk3399-mipi-dsi", > + .data = &rk3399_chip_data, > + }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids); It would be nice to have the above 3 structs at the bottom of the file along with the dw_mipi_dsi_rockchip_driver struct creation. Using of_device_get_match_data() should avoid the need to keep the of_device_id table at the bottom. > + > +static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder, > + struct drm_display_mode *mode, > + struct drm_display_mode *adjusted) > +{ > + struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); > + const struct rockchip_dw_dsi_chip_data *cdata = dsi->cdata; > + int val, ret; > + > + ret = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, > + &dsi->encoder); > + if (ret < 0) > + return; > + /* > + * For the RK3399, the clk of grf must be enabled before writing grf > + * register. And for RK3288 or other soc, this grf_clk must be NULL, > + * the clk_prepare_enable return true directly. > + */ > + ret = clk_prepare_enable(dsi->grf_clk); > + if (ret) { > + DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); > + return; > + } > + > + val = cdata->dsi0_en_bit << 16; > + if (ret) > + val |= cdata->dsi0_en_bit; Is this "if (ret)" check okay here? The older code checked on a "mux" variable. > + regmap_write(dsi->grf_regmap, cdata->grf_switch_reg, val); > + > + if (cdata->grf_dsi0_mode_reg) > + regmap_write(dsi->grf_regmap, cdata->grf_dsi0_mode_reg, > + cdata->grf_dsi0_mode); > + > + clk_disable_unprepare(dsi->grf_clk); > +} > + > +static int > +dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) > +{ > + struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); > + struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); > + > + switch (dsi->format) { > + case MIPI_DSI_FMT_RGB888: > + s->output_mode = ROCKCHIP_OUT_MODE_P888; > + break; > + case MIPI_DSI_FMT_RGB666: > + s->output_mode = ROCKCHIP_OUT_MODE_P666; > + break; > + case MIPI_DSI_FMT_RGB565: > + s->output_mode = ROCKCHIP_OUT_MODE_P565; > + break; > + default: > + WARN_ON(1); > + return -EINVAL; > + } > + > + s->output_type = DRM_MODE_CONNECTOR_DSI; > + > + return 0; > +} > + > +static const struct drm_encoder_helper_funcs > +dw_mipi_dsi_encoder_helper_funcs = { > + .mode_set = dw_mipi_dsi_encoder_mode_set, Are we using the mode_set() encoder helper func (instead of enable/disable) here because the dw-mipi-dsi bridge driver also does the majority of the DW DSI controller configuration in the bridge's mode_set() helper? > + .atomic_check = dw_mipi_dsi_encoder_atomic_check, > +}; > + > +static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { > + .destroy = drm_encoder_cleanup, > +}; > + > +static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi, > + struct drm_device *drm_dev) > +{ > + struct drm_encoder *encoder = &dsi->encoder; > + int ret; > + > + encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev, > + dsi->dev->of_node); > + > + ret = drm_encoder_init(drm_dev, encoder, &dw_mipi_dsi_encoder_funcs, > + DRM_MODE_ENCODER_DSI, NULL); > + if (ret) { > + DRM_ERROR("Failed to initialize encoder with drm\n"); > + return ret; > + } > + > + drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs); > + > + return 0; > +} > + > +static int dw_mipi_dsi_rockchip_bind(struct device *dev, > + struct device *master, > + void *data) > +{ > + const struct of_device_id *of_id = > + of_match_device(dw_mipi_dsi_rockchip_dt_ids, dev); > + const struct rockchip_dw_dsi_chip_data *cdata = of_id->data; You could use of_device_get_match_data() here. > + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); I guess this needs to be fixed as Brian described in the other mail. Thanks, Archit
Hi Archit, On 2017年11月28日 14:27, Archit Taneja wrote: > Hi, > > Thanks a lot for working on this. Some comments below. > Those comments have fixed in patch_v3 https://patchwork.kernel.org/patch/10079857/ Thanks for review. > On 11/28/2017 07:25 AM, Nickey Yang wrote: >> Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare >> MIPI DSI host controller bridge. >> >> Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> >> --- >>  drivers/gpu/drm/rockchip/Kconfig               |   2 +- >>  drivers/gpu/drm/rockchip/Makefile              |   2 +- >>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c         | 1349 >> ----------------------- >>  drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c | 756 +++++++++++++ >>  drivers/gpu/drm/rockchip/rockchip_drm_drv.c    |   2 +- >>  drivers/gpu/drm/rockchip/rockchip_drm_drv.h    |   2 +- >>  6 files changed, 760 insertions(+), 1353 deletions(-) >>  delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c >>  create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c >> >> diff --git a/drivers/gpu/drm/rockchip/Kconfig >> b/drivers/gpu/drm/rockchip/Kconfig >> index 0ccc762..9eb4795 100644 >> --- a/drivers/gpu/drm/rockchip/Kconfig >> +++ b/drivers/gpu/drm/rockchip/Kconfig >> @@ -7,7 +7,7 @@ config DRM_ROCKCHIP >>      select VIDEOMODE_HELPERS >>      select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP >>      select DRM_DW_HDMI if ROCKCHIP_DW_HDMI >> -   select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI >> +   select DRM_DW_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI >>      select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC >>      help >>        Choose this option if you have a Rockchip soc chipset. >> diff --git a/drivers/gpu/drm/rockchip/Makefile >> b/drivers/gpu/drm/rockchip/Makefile >> index a314e21..c05fe47 100644 >> --- a/drivers/gpu/drm/rockchip/Makefile >> +++ b/drivers/gpu/drm/rockchip/Makefile >> @@ -11,7 +11,7 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += >> rockchip_drm_fbdev.o >>  rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o >>  rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o >>  rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o >> -rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o >> +rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi_rockchip.o >>  rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o >>  rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o >>  diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c >> b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c >> deleted file mode 100644 >> index b15755b..0000000 >> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c >> +++ /dev/null >> @@ -1,1349 +0,0 @@ >> -/* >> - * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd >> - * >> - * This program is free software; you can redistribute it and/or modify >> - * it under the terms of the GNU General Public License as published by >> - * the Free Software Foundation; either version 2 of the License, or >> - * (at your option) any later version. >> - */ >> -#include <linux/clk.h> >> -#include <linux/component.h> >> -#include <linux/iopoll.h> >> -#include <linux/math64.h> >> -#include <linux/module.h> >> -#include <linux/of_device.h> >> -#include <linux/pm_runtime.h> >> -#include <linux/regmap.h> >> -#include <linux/reset.h> >> -#include <linux/mfd/syscon.h> >> -#include <drm/drm_atomic_helper.h> >> -#include <drm/drm_crtc.h> >> -#include <drm/drm_crtc_helper.h> >> -#include <drm/drm_mipi_dsi.h> >> -#include <drm/drm_of.h> >> -#include <drm/drm_panel.h> >> -#include <drm/drmP.h> >> -#include <video/mipi_display.h> >> - >> -#include "rockchip_drm_drv.h" >> -#include "rockchip_drm_vop.h" >> - >> -#define DRIVER_NAME   "dw-mipi-dsi" >> - >> -#define RK3288_GRF_SOC_CON6       0x025c >> -#define RK3288_DSI0_SEL_VOP_LIT       BIT(6) >> -#define RK3288_DSI1_SEL_VOP_LIT       BIT(9) >> - >> -#define RK3399_GRF_SOC_CON20       0x6250 >> -#define RK3399_DSI0_SEL_VOP_LIT       BIT(0) >> -#define RK3399_DSI1_SEL_VOP_LIT       BIT(4) >> - >> -/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ >> -#define RK3399_GRF_SOC_CON22       0x6258 >> -#define RK3399_GRF_DSI_MODE       0xffff0000 >> - >> -#define DSI_VERSION           0x00 >> -#define DSI_PWR_UP           0x04 >> -#define RESET               0 >> -#define POWERUP               BIT(0) >> - >> -#define DSI_CLKMGR_CFG           0x08 >> -#define TO_CLK_DIVIDSION(div)       (((div) & 0xff) << 8) >> -#define TX_ESC_CLK_DIVIDSION(div)   (((div) & 0xff) << 0) >> - >> -#define DSI_DPI_VCID           0x0c >> -#define DPI_VID(vid)           (((vid) & 0x3) << 0) >> - >> -#define DSI_DPI_COLOR_CODING       0x10 >> -#define EN18_LOOSELY           BIT(8) >> -#define DPI_COLOR_CODING_16BIT_1   0x0 >> -#define DPI_COLOR_CODING_16BIT_2   0x1 >> -#define DPI_COLOR_CODING_16BIT_3   0x2 >> -#define DPI_COLOR_CODING_18BIT_1   0x3 >> -#define DPI_COLOR_CODING_18BIT_2   0x4 >> -#define DPI_COLOR_CODING_24BIT       0x5 >> - >> -#define DSI_DPI_CFG_POL           0x14 >> -#define COLORM_ACTIVE_LOW       BIT(4) >> -#define SHUTD_ACTIVE_LOW       BIT(3) >> -#define HSYNC_ACTIVE_LOW       BIT(2) >> -#define VSYNC_ACTIVE_LOW       BIT(1) >> -#define DATAEN_ACTIVE_LOW       BIT(0) >> - >> -#define DSI_DPI_LP_CMD_TIM       0x18 >> -#define OUTVACT_LPCMD_TIME(p)       (((p) & 0xff) << 16) >> -#define INVACT_LPCMD_TIME(p)       ((p) & 0xff) >> - >> -#define DSI_DBI_CFG           0x20 >> -#define DSI_DBI_CMDSIZE           0x28 >> - >> -#define DSI_PCKHDL_CFG           0x2c >> -#define EN_CRC_RX           BIT(4) >> -#define EN_ECC_RX           BIT(3) >> -#define EN_BTA               BIT(2) >> -#define EN_EOTP_RX           BIT(1) >> -#define EN_EOTP_TX           BIT(0) >> - >> -#define DSI_MODE_CFG           0x34 >> -#define ENABLE_VIDEO_MODE       0 >> -#define ENABLE_CMD_MODE           BIT(0) >> - >> -#define DSI_VID_MODE_CFG       0x38 >> -#define FRAME_BTA_ACK           BIT(14) >> -#define ENABLE_LOW_POWER       (0x3f << 8) >> -#define ENABLE_LOW_POWER_MASK       (0x3f << 8) >> -#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES   0x0 >> -#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS   0x1 >> -#define VID_MODE_TYPE_BURST           0x2 >> -#define VID_MODE_TYPE_MASK           0x3 >> - >> -#define DSI_VID_PKT_SIZE       0x3c >> -#define VID_PKT_SIZE(p)           (((p) & 0x3fff) << 0) >> -#define VID_PKT_MAX_SIZE       0x3fff >> - >> -#define DSI_VID_HSA_TIME       0x48 >> -#define DSI_VID_HBP_TIME       0x4c >> -#define DSI_VID_HLINE_TIME       0x50 >> -#define DSI_VID_VSA_LINES       0x54 >> -#define DSI_VID_VBP_LINES       0x58 >> -#define DSI_VID_VFP_LINES       0x5c >> -#define DSI_VID_VACTIVE_LINES       0x60 >> -#define DSI_CMD_MODE_CFG       0x68 >> -#define MAX_RD_PKT_SIZE_LP       BIT(24) >> -#define DCS_LW_TX_LP           BIT(19) >> -#define DCS_SR_0P_TX_LP           BIT(18) >> -#define DCS_SW_1P_TX_LP           BIT(17) >> -#define DCS_SW_0P_TX_LP           BIT(16) >> -#define GEN_LW_TX_LP           BIT(14) >> -#define GEN_SR_2P_TX_LP           BIT(13) >> -#define GEN_SR_1P_TX_LP           BIT(12) >> -#define GEN_SR_0P_TX_LP           BIT(11) >> -#define GEN_SW_2P_TX_LP           BIT(10) >> -#define GEN_SW_1P_TX_LP           BIT(9) >> -#define GEN_SW_0P_TX_LP           BIT(8) >> -#define EN_ACK_RQST           BIT(1) >> -#define EN_TEAR_FX           BIT(0) >> - >> -#define CMD_MODE_ALL_LP           (MAX_RD_PKT_SIZE_LP | \ >> -                    DCS_LW_TX_LP | \ >> -                    DCS_SR_0P_TX_LP | \ >> -                    DCS_SW_1P_TX_LP | \ >> -                    DCS_SW_0P_TX_LP | \ >> -                    GEN_LW_TX_LP | \ >> -                    GEN_SR_2P_TX_LP | \ >> -                    GEN_SR_1P_TX_LP | \ >> -                    GEN_SR_0P_TX_LP | \ >> -                    GEN_SW_2P_TX_LP | \ >> -                    GEN_SW_1P_TX_LP | \ >> -                    GEN_SW_0P_TX_LP) >> - >> -#define DSI_GEN_HDR           0x6c >> -#define GEN_HDATA(data)           (((data) & 0xffff) << 8) >> -#define GEN_HDATA_MASK           (0xffff << 8) >> -#define GEN_HTYPE(type)           (((type) & 0xff) << 0) >> -#define GEN_HTYPE_MASK           0xff >> - >> -#define DSI_GEN_PLD_DATA       0x70 >> - >> -#define DSI_CMD_PKT_STATUS       0x74 >> -#define GEN_CMD_EMPTY           BIT(0) >> -#define GEN_CMD_FULL           BIT(1) >> -#define GEN_PLD_W_EMPTY           BIT(2) >> -#define GEN_PLD_W_FULL           BIT(3) >> -#define GEN_PLD_R_EMPTY           BIT(4) >> -#define GEN_PLD_R_FULL           BIT(5) >> -#define GEN_RD_CMD_BUSY           BIT(6) >> - >> -#define DSI_TO_CNT_CFG           0x78 >> -#define HSTX_TO_CNT(p)           (((p) & 0xffff) << 16) >> -#define LPRX_TO_CNT(p)           ((p) & 0xffff) >> - >> -#define DSI_BTA_TO_CNT           0x8c >> -#define DSI_LPCLK_CTRL           0x94 >> -#define AUTO_CLKLANE_CTRL       BIT(1) >> -#define PHY_TXREQUESTCLKHS       BIT(0) >> - >> -#define DSI_PHY_TMR_LPCLK_CFG       0x98 >> -#define PHY_CLKHS2LP_TIME(lbcc)       (((lbcc) & 0x3ff) << 16) >> -#define PHY_CLKLP2HS_TIME(lbcc)       ((lbcc) & 0x3ff) >> - >> -#define DSI_PHY_TMR_CFG           0x9c >> -#define PHY_HS2LP_TIME(lbcc)       (((lbcc) & 0xff) << 24) >> -#define PHY_LP2HS_TIME(lbcc)       (((lbcc) & 0xff) << 16) >> -#define MAX_RD_TIME(lbcc)       ((lbcc) & 0x7fff) >> - >> -#define DSI_PHY_RSTZ           0xa0 >> -#define PHY_DISFORCEPLL           0 >> -#define PHY_ENFORCEPLL           BIT(3) >> -#define PHY_DISABLECLK           0 >> -#define PHY_ENABLECLK           BIT(2) >> -#define PHY_RSTZ           0 >> -#define PHY_UNRSTZ           BIT(1) >> -#define PHY_SHUTDOWNZ           0 >> -#define PHY_UNSHUTDOWNZ           BIT(0) >> - >> -#define DSI_PHY_IF_CFG           0xa4 >> -#define N_LANES(n)           ((((n) - 1) & 0x3) << 0) >> -#define PHY_STOP_WAIT_TIME(cycle)   (((cycle) & 0xff) << 8) >> - >> -#define DSI_PHY_STATUS           0xb0 >> -#define LOCK               BIT(0) >> -#define STOP_STATE_CLK_LANE       BIT(2) >> - >> -#define DSI_PHY_TST_CTRL0       0xb4 >> -#define PHY_TESTCLK           BIT(1) >> -#define PHY_UNTESTCLK           0 >> -#define PHY_TESTCLR           BIT(0) >> -#define PHY_UNTESTCLR           0 >> - >> -#define DSI_PHY_TST_CTRL1       0xb8 >> -#define PHY_TESTEN           BIT(16) >> -#define PHY_UNTESTEN           0 >> -#define PHY_TESTDOUT(n)           (((n) & 0xff) << 8) >> -#define PHY_TESTDIN(n)           (((n) & 0xff) << 0) >> - >> -#define DSI_INT_ST0           0xbc >> -#define DSI_INT_ST1           0xc0 >> -#define DSI_INT_MSK0           0xc4 >> -#define DSI_INT_MSK1           0xc8 >> - >> -#define PHY_STATUS_TIMEOUT_US       10000 >> -#define CMD_PKT_STATUS_TIMEOUT_US   20000 >> - >> -#define BYPASS_VCO_RANGE   BIT(7) >> -#define VCO_RANGE_CON_SEL(val)   (((val) & 0x7) << 3) >> -#define VCO_IN_CAP_CON_DEFAULT   (0x0 << 1) >> -#define VCO_IN_CAP_CON_LOW   (0x1 << 1) >> -#define VCO_IN_CAP_CON_HIGH   (0x2 << 1) >> -#define REF_BIAS_CUR_SEL   BIT(0) >> - >> -#define CP_CURRENT_3MA       BIT(3) >> -#define CP_PROGRAM_EN       BIT(7) >> -#define LPF_PROGRAM_EN       BIT(6) >> -#define LPF_RESISTORS_20_KOHM   0 >> - >> -#define HSFREQRANGE_SEL(val)   (((val) & 0x3f) << 1) >> - >> -#define INPUT_DIVIDER(val)   (((val) - 1) & 0x7f) >> -#define LOW_PROGRAM_EN       0 >> -#define HIGH_PROGRAM_EN       BIT(7) >> -#define LOOP_DIV_LOW_SEL(val)   (((val) - 1) & 0x1f) >> -#define LOOP_DIV_HIGH_SEL(val)   ((((val) - 1) >> 5) & 0x1f) >> -#define PLL_LOOP_DIV_EN       BIT(5) >> -#define PLL_INPUT_DIV_EN   BIT(4) >> - >> -#define POWER_CONTROL       BIT(6) >> -#define INTERNAL_REG_CURRENT   BIT(3) >> -#define BIAS_BLOCK_ON       BIT(2) >> -#define BANDGAP_ON       BIT(0) >> - >> -#define TER_RESISTOR_HIGH   BIT(7) >> -#define   TER_RESISTOR_LOW   0 >> -#define LEVEL_SHIFTERS_ON   BIT(6) >> -#define TER_CAL_DONE       BIT(5) >> -#define SETRD_MAX       (0x7 << 2) >> -#define POWER_MANAGE       BIT(1) >> -#define TER_RESISTORS_ON   BIT(0) >> - >> -#define BIASEXTR_SEL(val)   ((val) & 0x7) >> -#define BANDGAP_SEL(val)   ((val) & 0x7) >> -#define TLP_PROGRAM_EN       BIT(7) >> -#define THS_PRE_PROGRAM_EN   BIT(7) >> -#define THS_ZERO_PROGRAM_EN   BIT(6) >> - >> -#define DW_MIPI_NEEDS_PHY_CFG_CLK   BIT(0) >> -#define DW_MIPI_NEEDS_GRF_CLK       BIT(1) >> - >> -enum { >> -   BANDGAP_97_07, >> -   BANDGAP_98_05, >> -   BANDGAP_99_02, >> -   BANDGAP_100_00, >> -   BANDGAP_93_17, >> -   BANDGAP_94_15, >> -   BANDGAP_95_12, >> -   BANDGAP_96_10, >> -}; >> - >> -enum { >> -   BIASEXTR_87_1, >> -   BIASEXTR_91_5, >> -   BIASEXTR_95_9, >> -   BIASEXTR_100, >> -   BIASEXTR_105_94, >> -   BIASEXTR_111_88, >> -   BIASEXTR_118_8, >> -   BIASEXTR_127_7, >> -}; >> - >> -struct dw_mipi_dsi_plat_data { >> -   u32 dsi0_en_bit; >> -   u32 dsi1_en_bit; >> -   u32 grf_switch_reg; >> -   u32 grf_dsi0_mode; >> -   u32 grf_dsi0_mode_reg; >> -   unsigned int flags; >> -   unsigned int max_data_lanes; >> -}; >> - >> -struct dw_mipi_dsi { >> -   struct drm_encoder encoder; >> -   struct drm_connector connector; >> -   struct mipi_dsi_host dsi_host; >> -   struct drm_panel *panel; >> -   struct device *dev; >> -   struct regmap *grf_regmap; >> -   void __iomem *base; >> - >> -   struct clk *grf_clk; >> -   struct clk *pllref_clk; >> -   struct clk *pclk; >> -   struct clk *phy_cfg_clk; >> - >> -   int dpms_mode; >> -   unsigned int lane_mbps; /* per lane */ >> -   u32 channel; >> -   u32 lanes; >> -   u32 format; >> -   u16 input_div; >> -   u16 feedback_div; >> -   unsigned long mode_flags; >> - >> -   const struct dw_mipi_dsi_plat_data *pdata; >> -}; >> - >> -enum dw_mipi_dsi_mode { >> -   DW_MIPI_DSI_CMD_MODE, >> -   DW_MIPI_DSI_VID_MODE, >> -}; >> - >> -struct dphy_pll_testdin_map { >> -   unsigned int max_mbps; >> -   u8 testdin; >> -}; >> - >> -/* The table is based on 27MHz DPHY pll reference clock. */ >> -static const struct dphy_pll_testdin_map dptdin_map[] = { >> -   { 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01}, >> -   { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12}, >> -   { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23}, >> -   { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15}, >> -   { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07}, >> -   { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09}, >> -   { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a}, >> -   {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b}, >> -   {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c}, >> -   {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} >> -}; >> - >> -static int max_mbps_to_testdin(unsigned int max_mbps) >> -{ >> -   int i; >> - >> -   for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) >> -       if (dptdin_map[i].max_mbps > max_mbps) >> -           return dptdin_map[i].testdin; >> - >> -   return -EINVAL; >> -} >> - >> -/* >> - * The controller should generate 2 frames before >> - * preparing the peripheral. >> - */ >> -static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode >> *mode) >> -{ >> -   int refresh, two_frames; >> - >> -   refresh = drm_mode_vrefresh(mode); >> -   two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2; >> -   msleep(two_frames); >> -} >> - >> -static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host >> *host) >> -{ >> -   return container_of(host, struct dw_mipi_dsi, dsi_host); >> -} >> - >> -static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con) >> -{ >> -   return container_of(con, struct dw_mipi_dsi, connector); >> -} >> - >> -static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder >> *encoder) >> -{ >> -   return container_of(encoder, struct dw_mipi_dsi, encoder); >> -} >> - >> -static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val) >> -{ >> -   writel(val, dsi->base + reg); >> -} >> - >> -static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg) >> -{ >> -   return readl(dsi->base + reg); >> -} >> - >> -static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 >> test_code, >> -                 u8 test_data) >> -{ >> -   /* >> -    * With the falling edge on TESTCLK, the TESTDIN[7:0] signal >> content >> -    * is latched internally as the current test code. Test data is >> -    * programmed internally by rising edge on TESTCLK. >> -    */ >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); >> - >> -   dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | >> -                     PHY_TESTDIN(test_code)); >> - >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); >> - >> -   dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | >> -                     PHY_TESTDIN(test_data)); >> - >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); >> -} >> - >> -/** >> - * ns2bc - Nanoseconds to byte clock cycles >> - */ >> -static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns) >> -{ >> -   return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); >> -} >> - >> -/** >> - * ns2ui - Nanoseconds to UI time periods >> - */ >> -static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns) >> -{ >> -   return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); >> -} >> - >> -static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) >> -{ >> -   int ret, testdin, vco, val; >> - >> -   vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; >> - >> -   testdin = max_mbps_to_testdin(dsi->lane_mbps); >> -   if (testdin < 0) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "failed to get testdin for %dmbps lane clock\n", >> -                 dsi->lane_mbps); >> -       return testdin; >> -   } >> - >> -   /* Start by clearing PHY state */ >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR); >> -   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); >> - >> -   ret = clk_prepare_enable(dsi->phy_cfg_clk); >> -   if (ret) { >> -       DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); >> -       return ret; >> -   } >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE | >> -                    VCO_RANGE_CON_SEL(vco) | >> -                    VCO_IN_CAP_CON_LOW | >> -                    REF_BIAS_CUR_SEL); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA); >> -   dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN | >> -                    LPF_RESISTORS_20_KOHM); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin)); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div)); >> -   dw_mipi_dsi_phy_write(dsi, 0x18, >> LOOP_DIV_LOW_SEL(dsi->feedback_div) | >> -                    LOW_PROGRAM_EN); >> -   dw_mipi_dsi_phy_write(dsi, 0x18, >> LOOP_DIV_HIGH_SEL(dsi->feedback_div) | >> -                    HIGH_PROGRAM_EN); >> -   dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | >> PLL_INPUT_DIV_EN); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN | >> -                    BIASEXTR_SEL(BIASEXTR_127_7)); >> -   dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN | >> -                    BANDGAP_SEL(BANDGAP_96_10)); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | >> INTERNAL_REG_CURRENT | >> -                    BIAS_BLOCK_ON | BANDGAP_ON); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE | >> -                    SETRD_MAX | TER_RESISTORS_ON); >> -   dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | >> LEVEL_SHIFTERS_ON | >> -                    SETRD_MAX | POWER_MANAGE | >> -                    TER_RESISTORS_ON); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500)); >> -   dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, >> 40)); >> -   dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | >> ns2bc(dsi, 300)); >> -   dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, >> 100)); >> -   dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100)); >> -   dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7)); >> - >> -   dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500)); >> -   dw_mipi_dsi_phy_write(dsi, 0x71, >> -                 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5)); >> -   dw_mipi_dsi_phy_write(dsi, 0x72, >> -                 THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); >> -   dw_mipi_dsi_phy_write(dsi, 0x73, >> -                 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); >> -   dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100)); >> - >> -   dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK | >> -                    PHY_UNRSTZ | PHY_UNSHUTDOWNZ); >> - >> -   ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, >> -                val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US); >> -   if (ret < 0) { >> -       DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n"); >> -       goto phy_init_end; >> -   } >> - >> -   ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, >> -                val, val & STOP_STATE_CLK_LANE, 1000, >> -                PHY_STATUS_TIMEOUT_US); >> -   if (ret < 0) >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "failed to wait for phy clk lane stop state\n"); >> - >> -phy_init_end: >> -   clk_disable_unprepare(dsi->phy_cfg_clk); >> - >> -   return ret; >> -} >> - >> -static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi, >> -                   struct drm_display_mode *mode) >> -{ >> -   unsigned int i, pre; >> -   unsigned long mpclk, pllref, tmp; >> -   unsigned int m = 1, n = 1, target_mbps = 1000; >> -   unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - >> 1].max_mbps; >> -   int bpp; >> - >> -   bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); >> -   if (bpp < 0) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "failed to get bpp for pixel format %d\n", >> -                 dsi->format); >> -       return bpp; >> -   } >> - >> -   mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); >> -   if (mpclk) { >> -       /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ >> -       tmp = mpclk * (bpp / dsi->lanes) * 10 / 8; >> -       if (tmp < max_mbps) >> -           target_mbps = tmp; >> -       else >> -           DRM_DEV_ERROR(dsi->dev, >> -                     "DPHY clock frequency is out of range\n"); >> -   } >> - >> -   pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC); >> -   tmp = pllref; >> - >> -   /* >> -    * The limits on the PLL divisor are: >> -    * >> -    *   5MHz <= (pllref / n) <= 40MHz >> -    * >> -    * we walk over these values in descreasing order so that if we hit >> -    * an exact match for target_mbps it is more likely that "m" >> will be >> -    * even. >> -    * >> -    * TODO: ensure that "m" is even after this loop. >> -    */ >> -   for (i = pllref / 5; i > (pllref / 40); i--) { >> -       pre = pllref / i; >> -       if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) { >> -           tmp = target_mbps % pre; >> -           n = i; >> -           m = target_mbps / pre; >> -       } >> -       if (tmp == 0) >> -           break; >> -   } >> - >> -   dsi->lane_mbps = pllref / n * m; >> -   dsi->input_div = n; >> -   dsi->feedback_div = m; >> - >> -   return 0; >> -} >> - >> -static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host, >> -                  struct mipi_dsi_device *device) >> -{ >> -   struct dw_mipi_dsi *dsi = host_to_dsi(host); >> - >> -   if (device->lanes > dsi->pdata->max_data_lanes) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "the number of data lanes(%u) is too many\n", >> -                 device->lanes); >> -       return -EINVAL; >> -   } >> - >> -   dsi->lanes = device->lanes; >> -   dsi->channel = device->channel; >> -   dsi->format = device->format; >> -   dsi->mode_flags = device->mode_flags; >> -   dsi->panel = of_drm_find_panel(device->dev.of_node); >> -   if (dsi->panel) >> -       return drm_panel_attach(dsi->panel, &dsi->connector); >> - >> -   return -EINVAL; >> -} >> - >> -static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host, >> -                  struct mipi_dsi_device *device) >> -{ >> -   struct dw_mipi_dsi *dsi = host_to_dsi(host); >> - >> -   drm_panel_detach(dsi->panel); >> - >> -   return 0; >> -} >> - >> -static void dw_mipi_message_config(struct dw_mipi_dsi *dsi, >> -                  const struct mipi_dsi_msg *msg) >> -{ >> -   bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM; >> -   u32 val = 0; >> - >> -   if (msg->flags & MIPI_DSI_MSG_REQ_ACK) >> -       val |= EN_ACK_RQST; >> -   if (lpm) >> -       val |= CMD_MODE_ALL_LP; >> - >> -   dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS); >> -   dsi_write(dsi, DSI_CMD_MODE_CFG, val); >> -} >> - >> -static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, >> u32 hdr_val) >> -{ >> -   int ret; >> -   u32 val, mask; >> - >> -   ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, >> -                val, !(val & GEN_CMD_FULL), 1000, >> -                CMD_PKT_STATUS_TIMEOUT_US); >> -   if (ret < 0) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "failed to get available command FIFO\n"); >> -       return ret; >> -   } >> - >> -   dsi_write(dsi, DSI_GEN_HDR, hdr_val); >> - >> -   mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY; >> -   ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, >> -                val, (val & mask) == mask, >> -                1000, CMD_PKT_STATUS_TIMEOUT_US); >> -   if (ret < 0) { >> -       DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n"); >> -       return ret; >> -   } >> - >> -   return 0; >> -} >> - >> -static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi, >> -                      const struct mipi_dsi_msg *msg) >> -{ >> -   const u8 *tx_buf = msg->tx_buf; >> -   u16 data = 0; >> -   u32 val; >> - >> -   if (msg->tx_len > 0) >> -       data |= tx_buf[0]; >> -   if (msg->tx_len > 1) >> -       data |= tx_buf[1] << 8; >> - >> -   if (msg->tx_len > 2) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "too long tx buf length %zu for short write\n", >> -                 msg->tx_len); >> -       return -EINVAL; >> -   } >> - >> -   val = GEN_HDATA(data) | GEN_HTYPE(msg->type); >> -   return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val); >> -} >> - >> -static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi, >> -                     const struct mipi_dsi_msg *msg) >> -{ >> -   const u8 *tx_buf = msg->tx_buf; >> -   int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret; >> -   u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type); >> -   u32 remainder; >> -   u32 val; >> - >> -   if (msg->tx_len < 3) { >> -       DRM_DEV_ERROR(dsi->dev, >> -                 "wrong tx buf length %zu for long write\n", >> -                 msg->tx_len); >> -       return -EINVAL; >> -   } >> - >> -   while (DIV_ROUND_UP(len, pld_data_bytes)) { >> -       if (len < pld_data_bytes) { >> -           remainder = 0; >> -           memcpy(&remainder, tx_buf, len); >> -           dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); >> -           len = 0; >> -       } else { >> -           memcpy(&remainder, tx_buf, pld_data_bytes); >> -           dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); >> -           tx_buf += pld_data_bytes; >> -           len -= pld_data_bytes; >> -       } >> - >> -       ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, >> -                    val, !(val & GEN_PLD_W_FULL), 1000, >> -                    CMD_PKT_STATUS_TIMEOUT_US); >> -       if (ret < 0) { >> -           DRM_DEV_ERROR(dsi->dev, >> -                     "failed to get available write payload FIFO\n"); >> -           return ret; >> -       } >> -   } >> - >> -   return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val); >> -} >> - >> -static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host, >> -                    const struct mipi_dsi_msg *msg) >> -{ >> -   struct dw_mipi_dsi *dsi = host_to_dsi(host); >> -   int ret; >> - >> -   dw_mipi_message_config(dsi, msg); >> - >> -   switch (msg->type) { >> -   case MIPI_DSI_DCS_SHORT_WRITE: >> -   case MIPI_DSI_DCS_SHORT_WRITE_PARAM: >> -   case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: >> -       ret = dw_mipi_dsi_dcs_short_write(dsi, msg); >> -       break; >> -   case MIPI_DSI_DCS_LONG_WRITE: >> -       ret = dw_mipi_dsi_dcs_long_write(dsi, msg); >> -       break; >> -   default: >> -       DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n", >> -                 msg->type); >> -       ret = -EINVAL; >> -   } >> - >> -   return ret; >> -} >> - >> -static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = { >> -   .attach = dw_mipi_dsi_host_attach, >> -   .detach = dw_mipi_dsi_host_detach, >> -   .transfer = dw_mipi_dsi_host_transfer, >> -}; >> - >> -static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi) >> -{ >> -   u32 val; >> - >> -   val = ENABLE_LOW_POWER; >> - >> -   if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) >> -       val |= VID_MODE_TYPE_BURST; >> -   else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) >> -       val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES; >> -   else >> -       val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS; >> - >> -   dsi_write(dsi, DSI_VID_MODE_CFG, val); >> -} >> - >> -static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi, >> -                enum dw_mipi_dsi_mode mode) >> -{ >> -   if (mode == DW_MIPI_DSI_CMD_MODE) { >> -       dsi_write(dsi, DSI_PWR_UP, RESET); >> -       dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); >> -       dsi_write(dsi, DSI_PWR_UP, POWERUP); >> -   } else { >> -       dsi_write(dsi, DSI_PWR_UP, RESET); >> -       dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE); >> -       dw_mipi_dsi_video_mode_config(dsi); >> -       dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS); >> -       dsi_write(dsi, DSI_PWR_UP, POWERUP); >> -   } >> -} >> - >> -static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_write(dsi, DSI_PWR_UP, RESET); >> -   dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ); >> -} >> - >> -static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) >> -{ >> -   /* >> -    * The maximum permitted escape clock is 20MHz and it is derived >> from >> -    * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: >> -    * >> -    *    (lane_mbps >> 3) / esc_clk_division < 20 >> -    * which is: >> -    *    (lane_mbps >> 3) / 20 > esc_clk_division >> -    */ >> -   u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; >> - >> -   dsi_write(dsi, DSI_PWR_UP, RESET); >> -   dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK >> -         | PHY_RSTZ | PHY_SHUTDOWNZ); >> -   dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) | >> -         TX_ESC_CLK_DIVIDSION(esc_clk_division)); >> -} >> - >> -static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi, >> -                  struct drm_display_mode *mode) >> -{ >> -   u32 val = 0, color = 0; >> - >> -   switch (dsi->format) { >> -   case MIPI_DSI_FMT_RGB888: >> -       color = DPI_COLOR_CODING_24BIT; >> -       break; >> -   case MIPI_DSI_FMT_RGB666: >> -       color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY; >> -       break; >> -   case MIPI_DSI_FMT_RGB666_PACKED: >> -       color = DPI_COLOR_CODING_18BIT_1; >> -       break; >> -   case MIPI_DSI_FMT_RGB565: >> -       color = DPI_COLOR_CODING_16BIT_1; >> -       break; >> -   } >> - >> -   if (mode->flags & DRM_MODE_FLAG_NVSYNC) >> -       val |= VSYNC_ACTIVE_LOW; >> -   if (mode->flags & DRM_MODE_FLAG_NHSYNC) >> -       val |= HSYNC_ACTIVE_LOW; >> - >> -   dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel)); >> -   dsi_write(dsi, DSI_DPI_COLOR_CODING, color); >> -   dsi_write(dsi, DSI_DPI_CFG_POL, val); >> -   dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4) >> -         | INVACT_LPCMD_TIME(4)); >> -} >> - >> -static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA); >> -} >> - >> -static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi, >> -                       struct drm_display_mode *mode) >> -{ >> -   dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay)); >> -} >> - >> -static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | >> LPRX_TO_CNT(1000)); >> -   dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00); >> -   dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); >> -} >> - >> -/* Get lane byte clock cycles. */ >> -static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi, >> -                      struct drm_display_mode *mode, >> -                      u32 hcomponent) >> -{ >> -   u32 frac, lbcc; >> - >> -   lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8; >> - >> -   frac = lbcc % mode->clock; >> -   lbcc = lbcc / mode->clock; >> -   if (frac) >> -       lbcc++; >> - >> -   return lbcc; >> -} >> - >> -static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi, >> -                     struct drm_display_mode *mode) >> -{ >> -   u32 htotal, hsa, hbp, lbcc; >> - >> -   htotal = mode->htotal; >> -   hsa = mode->hsync_end - mode->hsync_start; >> -   hbp = mode->htotal - mode->hsync_end; >> - >> -   lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal); >> -   dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc); >> - >> -   lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa); >> -   dsi_write(dsi, DSI_VID_HSA_TIME, lbcc); >> - >> -   lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp); >> -   dsi_write(dsi, DSI_VID_HBP_TIME, lbcc); >> -} >> - >> -static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi, >> -                          struct drm_display_mode *mode) >> -{ >> -   u32 vactive, vsa, vfp, vbp; >> - >> -   vactive = mode->vdisplay; >> -   vsa = mode->vsync_end - mode->vsync_start; >> -   vfp = mode->vsync_start - mode->vdisplay; >> -   vbp = mode->vtotal - mode->vsync_end; >> - >> -   dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive); >> -   dsi_write(dsi, DSI_VID_VSA_LINES, vsa); >> -   dsi_write(dsi, DSI_VID_VFP_LINES, vfp); >> -   dsi_write(dsi, DSI_VID_VBP_LINES, vbp); >> -} >> - >> -static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) >> -         | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000)); >> - >> -   dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40) >> -         | PHY_CLKLP2HS_TIME(0x40)); >> -} >> - >> -static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) | >> -         N_LANES(dsi->lanes)); >> -} >> - >> -static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi) >> -{ >> -   dsi_read(dsi, DSI_INT_ST0); >> -   dsi_read(dsi, DSI_INT_ST1); >> -   dsi_write(dsi, DSI_INT_MSK0, 0); >> -   dsi_write(dsi, DSI_INT_MSK1, 0); >> -} >> - >> -static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) >> -{ >> -   struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); >> - >> -   if (dsi->dpms_mode != DRM_MODE_DPMS_ON) >> -       return; >> - >> -   if (clk_prepare_enable(dsi->pclk)) { >> -       DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); >> -       return; >> -   } >> - >> -   drm_panel_disable(dsi->panel); >> - >> -   dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); >> -   drm_panel_unprepare(dsi->panel); >> - >> -   dw_mipi_dsi_disable(dsi); >> -   pm_runtime_put(dsi->dev); >> -   clk_disable_unprepare(dsi->pclk); >> -   dsi->dpms_mode = DRM_MODE_DPMS_OFF; >> -} >> - >> -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) >> -{ >> -   struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); >> -   struct drm_display_mode *mode = >> &encoder->crtc->state->adjusted_mode; >> -   const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata; >> -   int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, >> encoder); >> -   u32 val; >> -   int ret; >> - >> -   ret = dw_mipi_dsi_get_lane_bps(dsi, mode); >> -   if (ret < 0) >> -       return; >> - >> -   if (dsi->dpms_mode == DRM_MODE_DPMS_ON) >> -       return; >> - >> -   if (clk_prepare_enable(dsi->pclk)) { >> -       DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); >> -       return; >> -   } >> - >> -   pm_runtime_get_sync(dsi->dev); >> -   dw_mipi_dsi_init(dsi); >> -   dw_mipi_dsi_dpi_config(dsi, mode); >> -   dw_mipi_dsi_packet_handler_config(dsi); >> -   dw_mipi_dsi_video_mode_config(dsi); >> -   dw_mipi_dsi_video_packet_config(dsi, mode); >> -   dw_mipi_dsi_command_mode_config(dsi); >> -   dw_mipi_dsi_line_timer_config(dsi, mode); >> -   dw_mipi_dsi_vertical_timing_config(dsi, mode); >> -   dw_mipi_dsi_dphy_timing_config(dsi); >> -   dw_mipi_dsi_dphy_interface_config(dsi); >> -   dw_mipi_dsi_clear_err(dsi); >> - >> -   /* >> -    * For the RK3399, the clk of grf must be enabled before writing >> grf >> -    * register. And for RK3288 or other soc, this grf_clk must be >> NULL, >> -    * the clk_prepare_enable return true directly. >> -    */ >> -   ret = clk_prepare_enable(dsi->grf_clk); >> -   if (ret) { >> -       DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); >> -       return; >> -   } >> - >> -   if (pdata->grf_dsi0_mode_reg) >> -       regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg, >> -                pdata->grf_dsi0_mode); >> - >> -   dw_mipi_dsi_phy_init(dsi); >> -   dw_mipi_dsi_wait_for_two_frames(mode); >> - >> -   dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); >> -   if (drm_panel_prepare(dsi->panel)) >> -       DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n"); >> - >> -   dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); >> -   drm_panel_enable(dsi->panel); >> - >> -   clk_disable_unprepare(dsi->pclk); >> - >> -   if (mux) >> -       val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16); >> -   else >> -       val = pdata->dsi0_en_bit << 16; >> - >> -   regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val); >> -   DRM_DEV_DEBUG(dsi->dev, >> -             "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG"); >> -   dsi->dpms_mode = DRM_MODE_DPMS_ON; >> - >> -   clk_disable_unprepare(dsi->grf_clk); >> -} >> - >> -static int >> -dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, >> -                struct drm_crtc_state *crtc_state, >> -                struct drm_connector_state *conn_state) >> -{ >> -   struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); >> -   struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); >> - >> -   switch (dsi->format) { >> -   case MIPI_DSI_FMT_RGB888: >> -       s->output_mode = ROCKCHIP_OUT_MODE_P888; >> -       break; >> -   case MIPI_DSI_FMT_RGB666: >> -       s->output_mode = ROCKCHIP_OUT_MODE_P666; >> -       break; >> -   case MIPI_DSI_FMT_RGB565: >> -       s->output_mode = ROCKCHIP_OUT_MODE_P565; >> -       break; >> -   default: >> -       WARN_ON(1); >> -       return -EINVAL; >> -   } >> - >> -   s->output_type = DRM_MODE_CONNECTOR_DSI; >> - >> -   return 0; >> -} >> - >> -static const struct drm_encoder_helper_funcs >> -dw_mipi_dsi_encoder_helper_funcs = { >> -   .enable = dw_mipi_dsi_encoder_enable, >> -   .disable = dw_mipi_dsi_encoder_disable, >> -   .atomic_check = dw_mipi_dsi_encoder_atomic_check, >> -}; >> - >> -static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { >> -   .destroy = drm_encoder_cleanup, >> -}; >> - >> -static int dw_mipi_dsi_connector_get_modes(struct drm_connector >> *connector) >> -{ >> -   struct dw_mipi_dsi *dsi = con_to_dsi(connector); >> - >> -   return drm_panel_get_modes(dsi->panel); >> -} >> - >> -static struct drm_connector_helper_funcs >> dw_mipi_dsi_connector_helper_funcs = { >> -   .get_modes = dw_mipi_dsi_connector_get_modes, >> -}; >> - >> -static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector >> *connector) >> -{ >> -   drm_connector_unregister(connector); >> -   drm_connector_cleanup(connector); >> -} >> - >> -static const struct drm_connector_funcs >> dw_mipi_dsi_atomic_connector_funcs = { >> -   .fill_modes = drm_helper_probe_single_connector_modes, >> -   .destroy = dw_mipi_dsi_drm_connector_destroy, >> -   .reset = drm_atomic_helper_connector_reset, >> -   .atomic_duplicate_state = >> drm_atomic_helper_connector_duplicate_state, >> -   .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, >> -}; >> - >> -static int dw_mipi_dsi_register(struct drm_device *drm, >> -               struct dw_mipi_dsi *dsi) >> -{ >> -   struct drm_encoder *encoder = &dsi->encoder; >> -   struct drm_connector *connector = &dsi->connector; >> -   struct device *dev = dsi->dev; >> -   int ret; >> - >> -   encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, >> -                                dev->of_node); >> -   /* >> -    * If we failed to find the CRTC(s) which this encoder is >> -    * supposed to be connected to, it's because the CRTC has >> -    * not been registered yet. Defer probing, and hope that >> -    * the required CRTC is added later. >> -    */ >> -   if (encoder->possible_crtcs == 0) >> -       return -EPROBE_DEFER; >> - >> -   drm_encoder_helper_add(&dsi->encoder, >> -                  &dw_mipi_dsi_encoder_helper_funcs); >> -   ret = drm_encoder_init(drm, &dsi->encoder, >> &dw_mipi_dsi_encoder_funcs, >> -                  DRM_MODE_ENCODER_DSI, NULL); >> -   if (ret) { >> -       DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n"); >> -       return ret; >> -   } >> - >> -   drm_connector_helper_add(connector, >> -                &dw_mipi_dsi_connector_helper_funcs); >> - >> -   drm_connector_init(drm, &dsi->connector, >> -              &dw_mipi_dsi_atomic_connector_funcs, >> -              DRM_MODE_CONNECTOR_DSI); >> - >> -   drm_mode_connector_attach_encoder(connector, encoder); >> - >> -   return 0; >> -} >> - >> -static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi) >> -{ >> -   struct device_node *np = dsi->dev->of_node; >> - >> -   dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, >> "rockchip,grf"); >> -   if (IS_ERR(dsi->grf_regmap)) { >> -       DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n"); >> -       return PTR_ERR(dsi->grf_regmap); >> -   } >> - >> -   return 0; >> -} >> - >> -static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = { >> -   .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, >> -   .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, >> -   .grf_switch_reg = RK3288_GRF_SOC_CON6, >> -   .max_data_lanes = 4, >> -}; >> - >> -static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = { >> -   .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, >> -   .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, >> -   .grf_switch_reg = RK3399_GRF_SOC_CON20, >> -   .grf_dsi0_mode = RK3399_GRF_DSI_MODE, >> -   .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, >> -   .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, >> -   .max_data_lanes = 4, >> -}; >> - >> -static const struct of_device_id dw_mipi_dsi_dt_ids[] = { >> -   { >> -    .compatible = "rockchip,rk3288-mipi-dsi", >> -    .data = &rk3288_mipi_dsi_drv_data, >> -   }, { >> -    .compatible = "rockchip,rk3399-mipi-dsi", >> -    .data = &rk3399_mipi_dsi_drv_data, >> -   }, >> -   { /* sentinel */ } >> -}; >> -MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids); >> - >> -static int dw_mipi_dsi_bind(struct device *dev, struct device *master, >> -               void *data) >> -{ >> -   const struct of_device_id *of_id = >> -           of_match_device(dw_mipi_dsi_dt_ids, dev); >> -   const struct dw_mipi_dsi_plat_data *pdata = of_id->data; >> -   struct platform_device *pdev = to_platform_device(dev); >> -   struct reset_control *apb_rst; >> -   struct drm_device *drm = data; >> -   struct dw_mipi_dsi *dsi; >> -   struct resource *res; >> -   int ret; >> - >> -   dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); >> -   if (!dsi) >> -       return -ENOMEM; >> - >> -   dsi->dev = dev; >> -   dsi->pdata = pdata; >> -   dsi->dpms_mode = DRM_MODE_DPMS_OFF; >> - >> -   ret = rockchip_mipi_parse_dt(dsi); >> -   if (ret) >> -       return ret; >> - >> -   res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> -   if (!res) >> -       return -ENODEV; >> - >> -   dsi->base = devm_ioremap_resource(dev, res); >> -   if (IS_ERR(dsi->base)) >> -       return PTR_ERR(dsi->base); >> - >> -   dsi->pllref_clk = devm_clk_get(dev, "ref"); >> -   if (IS_ERR(dsi->pllref_clk)) { >> -       ret = PTR_ERR(dsi->pllref_clk); >> -       DRM_DEV_ERROR(dev, >> -                 "Unable to get pll reference clock: %d\n", ret); >> -       return ret; >> -   } >> - >> -   dsi->pclk = devm_clk_get(dev, "pclk"); >> -   if (IS_ERR(dsi->pclk)) { >> -       ret = PTR_ERR(dsi->pclk); >> -       DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret); >> -       return ret; >> -   } >> - >> -   /* >> -    * Note that the reset was not defined in the initial device >> tree, so >> -    * we have to be prepared for it not being found. >> -    */ >> -   apb_rst = devm_reset_control_get(dev, "apb"); >> -   if (IS_ERR(apb_rst)) { >> -       ret = PTR_ERR(apb_rst); >> -       if (ret == -ENOENT) { >> -           apb_rst = NULL; >> -       } else { >> -           DRM_DEV_ERROR(dev, >> -                     "Unable to get reset control: %d\n", ret); >> -           return ret; >> -       } >> -   } >> - >> -   if (apb_rst) { >> -       ret = clk_prepare_enable(dsi->pclk); >> -       if (ret) { >> -           DRM_DEV_ERROR(dev, "Failed to enable pclk\n"); >> -           return ret; >> -       } >> - >> -       reset_control_assert(apb_rst); >> -       usleep_range(10, 20); >> -       reset_control_deassert(apb_rst); >> - >> -       clk_disable_unprepare(dsi->pclk); >> -   } >> - >> -   if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) { >> -       dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg"); >> -       if (IS_ERR(dsi->phy_cfg_clk)) { >> -           ret = PTR_ERR(dsi->phy_cfg_clk); >> -           DRM_DEV_ERROR(dev, >> -                     "Unable to get phy_cfg_clk: %d\n", ret); >> -           return ret; >> -       } >> -   } >> - >> -   if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) { >> -       dsi->grf_clk = devm_clk_get(dev, "grf"); >> -       if (IS_ERR(dsi->grf_clk)) { >> -           ret = PTR_ERR(dsi->grf_clk); >> -           DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret); >> -           return ret; >> -       } >> -   } >> - >> -   ret = clk_prepare_enable(dsi->pllref_clk); >> -   if (ret) { >> -       DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n"); >> -       return ret; >> -   } >> - >> -   ret = dw_mipi_dsi_register(drm, dsi); >> -   if (ret) { >> -       DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret); >> -       goto err_pllref; >> -   } >> - >> -   pm_runtime_enable(dev); >> - >> -   dsi->dsi_host.ops = &dw_mipi_dsi_host_ops; >> -   dsi->dsi_host.dev = dev; >> -   ret = mipi_dsi_host_register(&dsi->dsi_host); >> -   if (ret) { >> -       DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret); >> -       goto err_cleanup; >> -   } >> - >> -   if (!dsi->panel) { >> -       ret = -EPROBE_DEFER; >> -       goto err_mipi_dsi_host; >> -   } >> - >> -   dev_set_drvdata(dev, dsi); >> -   return 0; >> - >> -err_mipi_dsi_host: >> -   mipi_dsi_host_unregister(&dsi->dsi_host); >> -err_cleanup: >> -   drm_encoder_cleanup(&dsi->encoder); >> -   drm_connector_cleanup(&dsi->connector); >> -err_pllref: >> -   clk_disable_unprepare(dsi->pllref_clk); >> -   return ret; >> -} >> - >> -static void dw_mipi_dsi_unbind(struct device *dev, struct device >> *master, >> -                  void *data) >> -{ >> -   struct dw_mipi_dsi *dsi = dev_get_drvdata(dev); >> - >> -   mipi_dsi_host_unregister(&dsi->dsi_host); >> -   pm_runtime_disable(dev); >> -   clk_disable_unprepare(dsi->pllref_clk); >> -} >> - >> -static const struct component_ops dw_mipi_dsi_ops = { >> -   .bind   = dw_mipi_dsi_bind, >> -   .unbind   = dw_mipi_dsi_unbind, >> -}; >> - >> -static int dw_mipi_dsi_probe(struct platform_device *pdev) >> -{ >> -   return component_add(&pdev->dev, &dw_mipi_dsi_ops); >> -} >> - >> -static int dw_mipi_dsi_remove(struct platform_device *pdev) >> -{ >> -   component_del(&pdev->dev, &dw_mipi_dsi_ops); >> -   return 0; >> -} >> - >> -struct platform_driver dw_mipi_dsi_driver = { >> -   .probe       = dw_mipi_dsi_probe, >> -   .remove       = dw_mipi_dsi_remove, >> -   .driver       = { >> -       .of_match_table = dw_mipi_dsi_dt_ids, >> -       .name   = DRIVER_NAME, >> -   }, >> -}; >> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c >> b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c >> new file mode 100644 >> index 0000000..c919d4f >> --- /dev/null >> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c >> @@ -0,0 +1,756 @@ >> +/* >> + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd >> + * Author: >> + *     Chris Zhong <zyw@rock-chips.com> >> + *     Nickey Yang <nickey.yang@rock-chips.com> >> + * >> + * This software is licensed under the terms of the GNU General Public >> + * License version 2, as published by the Free Software Foundation, and >> + * may be copied, distributed, and modified under those terms. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. >> + * >> + * License terms: GNU General Public License (GPL), version 2 >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/iopoll.h> >> +#include <linux/math64.h> >> +#include <linux/module.h> >> +#include <linux/of_device.h> >> +#include <drm/drmP.h> >> +#include <drm/drm_mipi_dsi.h> >> +#include <drm/bridge/dw_mipi_dsi.h> >> +#include <video/mipi_display.h> >> +#include <linux/regmap.h> >> +#include <drm/drm_of.h> >> +#include <linux/mfd/syscon.h> >> + >> +#include "rockchip_drm_drv.h" >> +#include "rockchip_drm_vop.h" >> + >> +#define DSI_PHY_TST_CTRL0       0xb4 >> +#define PHY_TESTCLK           BIT(1) >> +#define PHY_UNTESTCLK           0 >> +#define PHY_TESTCLR           BIT(0) >> +#define PHY_UNTESTCLR           0 >> + >> +#define DSI_PHY_TST_CTRL1       0xb8 >> +#define PHY_TESTEN           BIT(16) >> +#define PHY_UNTESTEN           0 >> +#define PHY_TESTDOUT(n)           (((n) & 0xff) << 8) >> +#define PHY_TESTDIN(n)           (((n) & 0xff) << 0) >> + >> +#define BYPASS_VCO_RANGE   BIT(7) >> +#define VCO_RANGE_CON_SEL(val)   (((val) & 0x7) << 3) >> +#define VCO_IN_CAP_CON_DEFAULT   (0x0 << 1) >> +#define VCO_IN_CAP_CON_LOW   (0x1 << 1) >> +#define VCO_IN_CAP_CON_HIGH   (0x2 << 1) >> +#define REF_BIAS_CUR_SEL   BIT(0) >> + >> +#define CP_CURRENT_3UA   0x1 >> +#define CP_CURRENT_4_5UA   0x2 >> +#define CP_CURRENT_7_5UA   0x6 >> +#define CP_CURRENT_6UA   0x9 >> +#define CP_CURRENT_12UA   0xb >> +#define CP_CURRENT_SEL(val)   ((val) & 0xf) >> +#define CP_PROGRAM_EN       BIT(7) >> + >> +#define LPF_RESISTORS_15_5KOHM   0x1 >> +#define LPF_RESISTORS_13KOHM   0x2 >> +#define LPF_RESISTORS_11_5KOHM   0x4 >> +#define LPF_RESISTORS_10_5KOHM   0x8 >> +#define LPF_RESISTORS_8KOHM   0x10 >> +#define LPF_PROGRAM_EN       BIT(6) >> +#define LPF_RESISTORS_SEL(val)   ((val) & 0x3f) >> + >> +#define HSFREQRANGE_SEL(val)   (((val) & 0x3f) << 1) >> + >> +#define INPUT_DIVIDER(val)   (((val) - 1) & 0x7f) >> +#define LOW_PROGRAM_EN       0 >> +#define HIGH_PROGRAM_EN       BIT(7) >> +#define LOOP_DIV_LOW_SEL(val)   (((val) - 1) & 0x1f) >> +#define LOOP_DIV_HIGH_SEL(val)   ((((val) - 1) >> 5) & 0xf) >> +#define PLL_LOOP_DIV_EN       BIT(5) >> +#define PLL_INPUT_DIV_EN   BIT(4) >> + >> +#define POWER_CONTROL       BIT(6) >> +#define INTERNAL_REG_CURRENT   BIT(3) >> +#define BIAS_BLOCK_ON       BIT(2) >> +#define BANDGAP_ON       BIT(0) >> + >> +#define TER_RESISTOR_HIGH   BIT(7) >> +#define   TER_RESISTOR_LOW   0 >> +#define LEVEL_SHIFTERS_ON   BIT(6) >> +#define TER_CAL_DONE       BIT(5) >> +#define SETRD_MAX       (0x7 << 2) >> +#define POWER_MANAGE       BIT(1) >> +#define TER_RESISTORS_ON   BIT(0) >> + >> +#define BIASEXTR_SEL(val)   ((val) & 0x7) >> +#define BANDGAP_SEL(val)   ((val) & 0x7) >> +#define TLP_PROGRAM_EN       BIT(7) >> +#define THS_PRE_PROGRAM_EN   BIT(7) >> +#define THS_ZERO_PROGRAM_EN   BIT(6) >> + >> +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL   0x10 >> +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS   0x11 >> +#define PLL_LPF_AND_CP_CONTROL   0x12 >> +#define PLL_INPUT_DIVIDER_RATIO   0x17 >> +#define PLL_LOOP_DIVIDER_RATIO   0x18 >> +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL   0x19 >> +#define BANDGAP_AND_BIAS_CONTROL   0x20 >> +#define TERMINATION_RESISTER_CONTROL   0x21 >> +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY   0x22 >> +#define HS_RX_CONTROL_OF_LANE_0   0x44 >> +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL   0x60 >> +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL   0x61 >> +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL   0x62 >> +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL   0x63 >> +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL   0x64 >> +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL   0x65 >> +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL   0x70 >> +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL   0x71 >> +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL   0x72 >> +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL   0x73 >> +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL   0x74 >> + >> +#define DW_MIPI_NEEDS_PHY_CFG_CLK   BIT(0) >> +#define DW_MIPI_NEEDS_GRF_CLK       BIT(1) >> + >> +#define RK3288_GRF_SOC_CON6       0x025c >> +#define RK3288_DSI0_SEL_VOP_LIT       BIT(6) >> +#define RK3288_DSI1_SEL_VOP_LIT       BIT(9) >> + >> +#define RK3399_GRF_SOC_CON20       0x6250 >> +#define RK3399_DSI0_SEL_VOP_LIT       BIT(0) >> +#define RK3399_DSI1_SEL_VOP_LIT       BIT(4) >> + >> +/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ >> +#define RK3399_GRF_SOC_CON22       0x6258 >> +#define RK3399_GRF_DSI_MODE       0xffff0000 >> + >> +#define to_dsi(nm)   container_of(nm, struct dw_mipi_dsi_rockchip, nm) >> + >> +enum { >> +   BANDGAP_97_07, >> +   BANDGAP_98_05, >> +   BANDGAP_99_02, >> +   BANDGAP_100_00, >> +   BANDGAP_93_17, >> +   BANDGAP_94_15, >> +   BANDGAP_95_12, >> +   BANDGAP_96_10, >> +}; >> + >> +enum { >> +   BIASEXTR_87_1, >> +   BIASEXTR_91_5, >> +   BIASEXTR_95_9, >> +   BIASEXTR_100, >> +   BIASEXTR_105_94, >> +   BIASEXTR_111_88, >> +   BIASEXTR_118_8, >> +   BIASEXTR_127_7, >> +}; >> + >> +struct rockchip_dw_dsi_chip_data { >> +   u32 dsi0_en_bit; >> +   u32 dsi1_en_bit; >> +   u32 grf_switch_reg; >> +   u32 grf_dsi0_mode; >> +   u32 grf_dsi0_mode_reg; >> +   unsigned int flags; >> +   unsigned int max_data_lanes; >> +}; >> + >> +struct dw_mipi_dsi_rockchip { >> +   struct device *dev; >> +   struct drm_encoder encoder; >> +   void __iomem *base; >> + >> +   struct regmap *grf_regmap; >> +   struct clk *pllref_clk; >> +   struct clk *grf_clk; >> +   struct clk *phy_cfg_clk; >> + >> +   unsigned int lane_mbps; /* per lane */ >> +   u16 input_div; >> +   u16 feedback_div; >> +   u32 format; >> + >> +   const struct rockchip_dw_dsi_chip_data *cdata; >> +   struct dw_mipi_dsi_plat_data pdata; >> +}; >> + >> +struct dphy_pll_parameter_map { >> +   unsigned int max_mbps; >> +   u8 hsfreqrange; >> +   u8 icpctrl; >> +   u8 lpfctrl; >> +}; >> + >> +/* The table is based on 27MHz DPHY pll reference clock. */ >> +static const struct dphy_pll_parameter_map dppa_map[] = { >> +   { 89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, >> +   { 99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, >> +   { 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, >> +   { 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, >> +   { 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, >> +   { 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, >> +   { 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, >> +   { 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, >> +   { 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, >> +   { 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, >> +   { 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, >> +   { 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, >> +   { 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, >> +   { 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, >> +   { 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, >> +   { 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, >> +   { 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, >> +   {1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, >> +   {1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, >> +   {1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, >> +   {1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM} > > minor nit: you should leave a space before the closing brace '}'. > >> +}; >> + >> +static int max_mbps_to_parameter(unsigned int max_mbps) >> +{ >> +   int i; >> + >> +   for (i = 0; i < ARRAY_SIZE(dppa_map); i++) >> +       if (dppa_map[i].max_mbps >= max_mbps) >> +           return i; >> + >> +   return -EINVAL; >> +} >> + >> +static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32 >> reg, u32 val) >> +{ >> +   writel(val, dsi->base + reg); >> +} >> + >> +static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg) >> +{ >> +   return readl(dsi->base + reg); >> +} >> + >> +static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32 >> reg, u32 mask) >> +{ >> +   dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); >> +} >> + >> +static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi, >> u32 reg, >> +                  u32 mask, u32 val) >> +{ >> +   dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); >> +} >> + >> +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi, >> +                 u8 test_code, >> +                 u8 test_data) >> +{ >> +   /* >> +    * With the falling edge on TESTCLK, the TESTDIN[7:0] signal >> content >> +    * is latched internally as the current test code. Test data is >> +    * programmed internally by rising edge on TESTCLK. >> +    */ >> +   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); >> + >> +   dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | >> +                     PHY_TESTDIN(test_code)); >> + >> +   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); >> + >> +   dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | >> +                     PHY_TESTDIN(test_data)); >> + >> +   dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); >> +} >> + >> +/** >> + * ns2bc - Nanoseconds to byte clock cycles >> + */ >> +static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi, >> int ns) >> +{ >> +   return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); >> +} >> + >> +/** >> + * ns2ui - Nanoseconds to UI time periods >> + */ >> +static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi, >> int ns) >> +{ >> +   return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); >> +} >> + >> +static int dw_mipi_dsi_phy_init(void *priv_data) >> +{ >> +   struct dw_mipi_dsi_rockchip *dsi = priv_data; >> +   int ret, i, vco; >> + >> +   vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; >> + >> +   i = max_mbps_to_parameter(dsi->lane_mbps); >> +   if (i < 0) { >> +       DRM_DEV_ERROR(dsi->dev, >> +                 "failed to get parameter for %dmbps clock\n", >> +                 dsi->lane_mbps); >> +       return i; >> +   } >> + >> +   ret = clk_prepare_enable(dsi->phy_cfg_clk); >> +   if (ret) { >> +       DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); >> +       return ret; >> +   } >> + >> +   dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL, >> +                 BYPASS_VCO_RANGE | >> +                 VCO_RANGE_CON_SEL(vco) | >> +                 VCO_IN_CAP_CON_LOW | >> +                 REF_BIAS_CUR_SEL); >> + >> +   dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS, >> +                 CP_CURRENT_SEL(dppa_map[i].icpctrl)); >> +   dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL, >> +                 CP_PROGRAM_EN | LPF_PROGRAM_EN | >> +                 LPF_RESISTORS_SEL(dppa_map[i].lpfctrl)); >> + >> +   dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0, >> +                 HSFREQRANGE_SEL(dppa_map[i].hsfreqrange)); >> + >> +   dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO, >> +                 INPUT_DIVIDER(dsi->input_div)); >> +   dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, >> +                 LOOP_DIV_LOW_SEL(dsi->feedback_div) | >> +                 LOW_PROGRAM_EN); >> +   /* >> +    * We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL >> immediately >> +    * to make the configured LSB effective according to IP simulation >> +    * and lab test results. >> +    * Only in this way can we get correct mipi phy pll frequency. >> +    */ >> +   dw_mipi_dsi_phy_write(dsi, >> PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, >> +                 PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); >> +   dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, >> +                 LOOP_DIV_HIGH_SEL(dsi->feedback_div) | >> +                 HIGH_PROGRAM_EN); >> +   dw_mipi_dsi_phy_write(dsi, >> PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, >> +                 PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); >> + >> +   dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, >> +                 LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7)); >> +   dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, >> +                 HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10)); >> + >> +   dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL, >> +                 POWER_CONTROL | INTERNAL_REG_CURRENT | >> +                 BIAS_BLOCK_ON | BANDGAP_ON); >> + >> +   dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, >> +                 TER_RESISTOR_LOW | TER_CAL_DONE | >> +                 SETRD_MAX | TER_RESISTORS_ON); >> +   dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, >> +                 TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON | >> +                 SETRD_MAX | POWER_MANAGE | >> +                 TER_RESISTORS_ON); >> + >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL, >> +                 TLP_PROGRAM_EN | ns2bc(dsi, 500)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL, >> +                 THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL, >> +                 THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL, >> +                 THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL, >> +                 BIT(5) | ns2bc(dsi, 100)); >> +   dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL, >> +                 BIT(5) | (ns2bc(dsi, 60) + 7)); >> + >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL, >> +                 TLP_PROGRAM_EN | ns2bc(dsi, 500)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL, >> +                 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL, >> +                 THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); >> +   dw_mipi_dsi_phy_write(dsi, >> HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL, >> +                 THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); >> +   dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL, >> +                 BIT(5) | ns2bc(dsi, 100)); >> + >> +   clk_disable_unprepare(dsi->phy_cfg_clk); >> + >> +   return ret; >> +} >> + >> +static int >> +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode >> *mode, >> +             unsigned long mode_flags, u32 lanes, u32 format, >> +             unsigned int *lane_mbps) >> +{ >> +   struct dw_mipi_dsi_rockchip *dsi = priv_data; >> +   int bpp; >> +   unsigned long mpclk, tmp; >> +   unsigned int target_mbps = 1000; >> +   unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - >> 1].max_mbps; >> +   unsigned long best_freq = 0; >> +   unsigned long fvco_min, fvco_max, fin, fout; >> +   unsigned int min_prediv, max_prediv; >> +   unsigned int _prediv, uninitialized_var(best_prediv); >> +   unsigned long _fbdiv, uninitialized_var(best_fbdiv); >> +   unsigned long min_delta = ULONG_MAX; >> + >> +   dsi->format = format; >> +   bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); >> +   if (bpp < 0) { >> +       DRM_DEV_ERROR(dsi->dev, >> +                 "failed to get bpp for pixel format %d\n", >> +                 dsi->format); >> +       return bpp; >> +   } >> + >> +   mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); >> +   if (mpclk) { >> +       /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ >> +       tmp = mpclk * (bpp / lanes) * 10 / 8; >> +       if (tmp < max_mbps) >> +           target_mbps = tmp; >> +       else >> +           DRM_DEV_ERROR(dsi->dev, >> +                     "DPHY clock frequency is out of range\n"); >> +   } >> + >> +   fin = clk_get_rate(dsi->pllref_clk); >> +   fout = target_mbps * USEC_PER_SEC; >> + >> +   /* constraint: 5Mhz <= Fref / N <= 40MHz */ >> +   min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC); >> +   max_prediv = fin / (5 * USEC_PER_SEC); >> + >> +   /* constraint: 80MHz <= Fvco <= 1500Mhz */ >> +   fvco_min = 80 * USEC_PER_SEC; >> +   fvco_max = 1500 * USEC_PER_SEC; >> + >> +   for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { >> +       u64 tmp; >> +       u32 delta; >> +       /* Fvco = Fref * M / N */ >> +       tmp = (u64)fout * _prediv; >> +       do_div(tmp, fin); >> +       _fbdiv = tmp; >> +       /* >> +        * Due to the use of a "by 2 pre-scaler," the range of the >> +        * feedback multiplication value M is limited to even division >> +        * numbers, and m must be greater than 6, less than 512. >> +        */ >> +       if (_fbdiv < 6 || _fbdiv > 512) >> +           continue; >> + >> +       _fbdiv += _fbdiv % 2; >> + >> +       tmp = (u64)_fbdiv * fin; >> +       do_div(tmp, _prediv); >> +       if (tmp < fvco_min || tmp > fvco_max) >> +           continue; >> + >> +       delta = abs(fout - tmp); >> +       if (delta < min_delta) { >> +           best_prediv = _prediv; >> +           best_fbdiv = _fbdiv; >> +           min_delta = delta; >> +           best_freq = tmp; >> +       } >> +   } >> + >> +   if (best_freq) { >> +       dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC); >> +       *lane_mbps = dsi->lane_mbps; >> +       dsi->input_div = best_prediv; >> +       dsi->feedback_div = best_fbdiv; >> +   } else { >> +       DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n"); >> +   } >> + >> +   return 0; >> +} >> + >> +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops >> = { >> +   .init = dw_mipi_dsi_phy_init, >> +   .get_lane_mbps = dw_mipi_dsi_get_lane_mbps, >> +}; >> + >> +static struct rockchip_dw_dsi_chip_data rk3288_chip_data = { >> +   .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, >> +   .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, >> +   .grf_switch_reg = RK3288_GRF_SOC_CON6, >> +   .max_data_lanes = 4, >> +}; >> + >> +static struct rockchip_dw_dsi_chip_data rk3399_chip_data = { >> +   .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, >> +   .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, >> +   .grf_switch_reg = RK3399_GRF_SOC_CON20, >> +   .grf_dsi0_mode = RK3399_GRF_DSI_MODE, >> +   .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, >> +   .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, >> +   .max_data_lanes = 4, >> +}; >> + >> +static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = { >> +   { >> +    .compatible = "rockchip,rk3288-mipi-dsi", >> +    .data = &rk3288_chip_data, >> +   }, { >> +    .compatible = "rockchip,rk3399-mipi-dsi", >> +    .data = &rk3399_chip_data, >> +   }, >> +   { /* sentinel */ } >> +}; >> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids); > > It would be nice to have the above 3 structs at the bottom of the file > along with the dw_mipi_dsi_rockchip_driver struct creation. Using > of_device_get_match_data() should avoid the need to keep the of_device_id > table at the bottom. Done in patch v3 > >> + >> +static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder, >> +                        struct drm_display_mode *mode, >> +                        struct drm_display_mode *adjusted) >> +{ >> +   struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); >> +   const struct rockchip_dw_dsi_chip_data *cdata = dsi->cdata; >> +   int val, ret; >> + >> +   ret = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, >> +                       &dsi->encoder); >> +   if (ret < 0) >> +       return; >> +   /* >> +    * For the RK3399, the clk of grf must be enabled before writing >> grf >> +    * register. And for RK3288 or other soc, this grf_clk must be >> NULL, >> +    * the clk_prepare_enable return true directly. >> +    */ >> +   ret = clk_prepare_enable(dsi->grf_clk); >> +   if (ret) { >> +       DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); >> +       return; >> +   } >> + >> +   val = cdata->dsi0_en_bit << 16; >> +   if (ret) >> +       val |= cdata->dsi0_en_bit; > > Is this "if (ret)" check okay here? The older code checked on a "mux" > variable. > >> +   regmap_write(dsi->grf_regmap, cdata->grf_switch_reg, val); >> + >> +   if (cdata->grf_dsi0_mode_reg) >> +       regmap_write(dsi->grf_regmap, cdata->grf_dsi0_mode_reg, >> +                cdata->grf_dsi0_mode); >> + >> +   clk_disable_unprepare(dsi->grf_clk); >> +} >> + >> +static int >> +dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, >> +                struct drm_crtc_state *crtc_state, >> +                struct drm_connector_state *conn_state) >> +{ >> +   struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); >> +   struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); >> + >> +   switch (dsi->format) { >> +   case MIPI_DSI_FMT_RGB888: >> +       s->output_mode = ROCKCHIP_OUT_MODE_P888; >> +       break; >> +   case MIPI_DSI_FMT_RGB666: >> +       s->output_mode = ROCKCHIP_OUT_MODE_P666; >> +       break; >> +   case MIPI_DSI_FMT_RGB565: >> +       s->output_mode = ROCKCHIP_OUT_MODE_P565; >> +       break; >> +   default: >> +       WARN_ON(1); >> +       return -EINVAL; >> +   } >> + >> +   s->output_type = DRM_MODE_CONNECTOR_DSI; >> + >> +   return 0; >> +} >> + >> +static const struct drm_encoder_helper_funcs >> +dw_mipi_dsi_encoder_helper_funcs = { >> +   .mode_set = dw_mipi_dsi_encoder_mode_set, > > Are we using the mode_set() encoder helper func (instead of > enable/disable) here because > the dw-mipi-dsi bridge driver also does the majority of the DW DSI > controller configuration > in the bridge's mode_set() helper? yes, GRF should be set before bridge's mode_set(). > >> +   .atomic_check = dw_mipi_dsi_encoder_atomic_check, >> +}; >> + >> +static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { >> +   .destroy = drm_encoder_cleanup, >> +}; >> + >> +static int rockchip_dsi_drm_create_encoder(struct >> dw_mipi_dsi_rockchip *dsi, >> +                      struct drm_device *drm_dev) >> +{ >> +   struct drm_encoder *encoder = &dsi->encoder; >> +   int ret; >> + >> +   encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev, >> +                                dsi->dev->of_node); >> + >> +   ret = drm_encoder_init(drm_dev, encoder, >> &dw_mipi_dsi_encoder_funcs, >> +                  DRM_MODE_ENCODER_DSI, NULL); >> +   if (ret) { >> +       DRM_ERROR("Failed to initialize encoder with drm\n"); >> +       return ret; >> +   } >> + >> +   drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs); >> + >> +   return 0; >> +} >> + >> +static int dw_mipi_dsi_rockchip_bind(struct device *dev, >> +                    struct device *master, >> +                    void *data) >> +{ >> +   const struct of_device_id *of_id = >> +           of_match_device(dw_mipi_dsi_rockchip_dt_ids, dev); >> +   const struct rockchip_dw_dsi_chip_data *cdata = of_id->data; > > You could use of_device_get_match_data() here. > >> +   struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); > > I guess this needs to be fixed as Brian described in the other mail. > > Thanks, > Archit >
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig index 0ccc762..9eb4795 100644 --- a/drivers/gpu/drm/rockchip/Kconfig +++ b/drivers/gpu/drm/rockchip/Kconfig @@ -7,7 +7,7 @@ config DRM_ROCKCHIP select VIDEOMODE_HELPERS select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP select DRM_DW_HDMI if ROCKCHIP_DW_HDMI - select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI + select DRM_DW_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC help Choose this option if you have a Rockchip soc chipset. diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile index a314e21..c05fe47 100644 --- a/drivers/gpu/drm/rockchip/Makefile +++ b/drivers/gpu/drm/rockchip/Makefile @@ -11,7 +11,7 @@ rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o rockchipdrm-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o -rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o +rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi_rockchip.o rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c deleted file mode 100644 index b15755b..0000000 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ /dev/null @@ -1,1349 +0,0 @@ -/* - * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/clk.h> -#include <linux/component.h> -#include <linux/iopoll.h> -#include <linux/math64.h> -#include <linux/module.h> -#include <linux/of_device.h> -#include <linux/pm_runtime.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <linux/mfd/syscon.h> -#include <drm/drm_atomic_helper.h> -#include <drm/drm_crtc.h> -#include <drm/drm_crtc_helper.h> -#include <drm/drm_mipi_dsi.h> -#include <drm/drm_of.h> -#include <drm/drm_panel.h> -#include <drm/drmP.h> -#include <video/mipi_display.h> - -#include "rockchip_drm_drv.h" -#include "rockchip_drm_vop.h" - -#define DRIVER_NAME "dw-mipi-dsi" - -#define RK3288_GRF_SOC_CON6 0x025c -#define RK3288_DSI0_SEL_VOP_LIT BIT(6) -#define RK3288_DSI1_SEL_VOP_LIT BIT(9) - -#define RK3399_GRF_SOC_CON20 0x6250 -#define RK3399_DSI0_SEL_VOP_LIT BIT(0) -#define RK3399_DSI1_SEL_VOP_LIT BIT(4) - -/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ -#define RK3399_GRF_SOC_CON22 0x6258 -#define RK3399_GRF_DSI_MODE 0xffff0000 - -#define DSI_VERSION 0x00 -#define DSI_PWR_UP 0x04 -#define RESET 0 -#define POWERUP BIT(0) - -#define DSI_CLKMGR_CFG 0x08 -#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8) -#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0) - -#define DSI_DPI_VCID 0x0c -#define DPI_VID(vid) (((vid) & 0x3) << 0) - -#define DSI_DPI_COLOR_CODING 0x10 -#define EN18_LOOSELY BIT(8) -#define DPI_COLOR_CODING_16BIT_1 0x0 -#define DPI_COLOR_CODING_16BIT_2 0x1 -#define DPI_COLOR_CODING_16BIT_3 0x2 -#define DPI_COLOR_CODING_18BIT_1 0x3 -#define DPI_COLOR_CODING_18BIT_2 0x4 -#define DPI_COLOR_CODING_24BIT 0x5 - -#define DSI_DPI_CFG_POL 0x14 -#define COLORM_ACTIVE_LOW BIT(4) -#define SHUTD_ACTIVE_LOW BIT(3) -#define HSYNC_ACTIVE_LOW BIT(2) -#define VSYNC_ACTIVE_LOW BIT(1) -#define DATAEN_ACTIVE_LOW BIT(0) - -#define DSI_DPI_LP_CMD_TIM 0x18 -#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16) -#define INVACT_LPCMD_TIME(p) ((p) & 0xff) - -#define DSI_DBI_CFG 0x20 -#define DSI_DBI_CMDSIZE 0x28 - -#define DSI_PCKHDL_CFG 0x2c -#define EN_CRC_RX BIT(4) -#define EN_ECC_RX BIT(3) -#define EN_BTA BIT(2) -#define EN_EOTP_RX BIT(1) -#define EN_EOTP_TX BIT(0) - -#define DSI_MODE_CFG 0x34 -#define ENABLE_VIDEO_MODE 0 -#define ENABLE_CMD_MODE BIT(0) - -#define DSI_VID_MODE_CFG 0x38 -#define FRAME_BTA_ACK BIT(14) -#define ENABLE_LOW_POWER (0x3f << 8) -#define ENABLE_LOW_POWER_MASK (0x3f << 8) -#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES 0x0 -#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1 -#define VID_MODE_TYPE_BURST 0x2 -#define VID_MODE_TYPE_MASK 0x3 - -#define DSI_VID_PKT_SIZE 0x3c -#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0) -#define VID_PKT_MAX_SIZE 0x3fff - -#define DSI_VID_HSA_TIME 0x48 -#define DSI_VID_HBP_TIME 0x4c -#define DSI_VID_HLINE_TIME 0x50 -#define DSI_VID_VSA_LINES 0x54 -#define DSI_VID_VBP_LINES 0x58 -#define DSI_VID_VFP_LINES 0x5c -#define DSI_VID_VACTIVE_LINES 0x60 -#define DSI_CMD_MODE_CFG 0x68 -#define MAX_RD_PKT_SIZE_LP BIT(24) -#define DCS_LW_TX_LP BIT(19) -#define DCS_SR_0P_TX_LP BIT(18) -#define DCS_SW_1P_TX_LP BIT(17) -#define DCS_SW_0P_TX_LP BIT(16) -#define GEN_LW_TX_LP BIT(14) -#define GEN_SR_2P_TX_LP BIT(13) -#define GEN_SR_1P_TX_LP BIT(12) -#define GEN_SR_0P_TX_LP BIT(11) -#define GEN_SW_2P_TX_LP BIT(10) -#define GEN_SW_1P_TX_LP BIT(9) -#define GEN_SW_0P_TX_LP BIT(8) -#define EN_ACK_RQST BIT(1) -#define EN_TEAR_FX BIT(0) - -#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \ - DCS_LW_TX_LP | \ - DCS_SR_0P_TX_LP | \ - DCS_SW_1P_TX_LP | \ - DCS_SW_0P_TX_LP | \ - GEN_LW_TX_LP | \ - GEN_SR_2P_TX_LP | \ - GEN_SR_1P_TX_LP | \ - GEN_SR_0P_TX_LP | \ - GEN_SW_2P_TX_LP | \ - GEN_SW_1P_TX_LP | \ - GEN_SW_0P_TX_LP) - -#define DSI_GEN_HDR 0x6c -#define GEN_HDATA(data) (((data) & 0xffff) << 8) -#define GEN_HDATA_MASK (0xffff << 8) -#define GEN_HTYPE(type) (((type) & 0xff) << 0) -#define GEN_HTYPE_MASK 0xff - -#define DSI_GEN_PLD_DATA 0x70 - -#define DSI_CMD_PKT_STATUS 0x74 -#define GEN_CMD_EMPTY BIT(0) -#define GEN_CMD_FULL BIT(1) -#define GEN_PLD_W_EMPTY BIT(2) -#define GEN_PLD_W_FULL BIT(3) -#define GEN_PLD_R_EMPTY BIT(4) -#define GEN_PLD_R_FULL BIT(5) -#define GEN_RD_CMD_BUSY BIT(6) - -#define DSI_TO_CNT_CFG 0x78 -#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16) -#define LPRX_TO_CNT(p) ((p) & 0xffff) - -#define DSI_BTA_TO_CNT 0x8c -#define DSI_LPCLK_CTRL 0x94 -#define AUTO_CLKLANE_CTRL BIT(1) -#define PHY_TXREQUESTCLKHS BIT(0) - -#define DSI_PHY_TMR_LPCLK_CFG 0x98 -#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16) -#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff) - -#define DSI_PHY_TMR_CFG 0x9c -#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24) -#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16) -#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff) - -#define DSI_PHY_RSTZ 0xa0 -#define PHY_DISFORCEPLL 0 -#define PHY_ENFORCEPLL BIT(3) -#define PHY_DISABLECLK 0 -#define PHY_ENABLECLK BIT(2) -#define PHY_RSTZ 0 -#define PHY_UNRSTZ BIT(1) -#define PHY_SHUTDOWNZ 0 -#define PHY_UNSHUTDOWNZ BIT(0) - -#define DSI_PHY_IF_CFG 0xa4 -#define N_LANES(n) ((((n) - 1) & 0x3) << 0) -#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8) - -#define DSI_PHY_STATUS 0xb0 -#define LOCK BIT(0) -#define STOP_STATE_CLK_LANE BIT(2) - -#define DSI_PHY_TST_CTRL0 0xb4 -#define PHY_TESTCLK BIT(1) -#define PHY_UNTESTCLK 0 -#define PHY_TESTCLR BIT(0) -#define PHY_UNTESTCLR 0 - -#define DSI_PHY_TST_CTRL1 0xb8 -#define PHY_TESTEN BIT(16) -#define PHY_UNTESTEN 0 -#define PHY_TESTDOUT(n) (((n) & 0xff) << 8) -#define PHY_TESTDIN(n) (((n) & 0xff) << 0) - -#define DSI_INT_ST0 0xbc -#define DSI_INT_ST1 0xc0 -#define DSI_INT_MSK0 0xc4 -#define DSI_INT_MSK1 0xc8 - -#define PHY_STATUS_TIMEOUT_US 10000 -#define CMD_PKT_STATUS_TIMEOUT_US 20000 - -#define BYPASS_VCO_RANGE BIT(7) -#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3) -#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1) -#define VCO_IN_CAP_CON_LOW (0x1 << 1) -#define VCO_IN_CAP_CON_HIGH (0x2 << 1) -#define REF_BIAS_CUR_SEL BIT(0) - -#define CP_CURRENT_3MA BIT(3) -#define CP_PROGRAM_EN BIT(7) -#define LPF_PROGRAM_EN BIT(6) -#define LPF_RESISTORS_20_KOHM 0 - -#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1) - -#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f) -#define LOW_PROGRAM_EN 0 -#define HIGH_PROGRAM_EN BIT(7) -#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f) -#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0x1f) -#define PLL_LOOP_DIV_EN BIT(5) -#define PLL_INPUT_DIV_EN BIT(4) - -#define POWER_CONTROL BIT(6) -#define INTERNAL_REG_CURRENT BIT(3) -#define BIAS_BLOCK_ON BIT(2) -#define BANDGAP_ON BIT(0) - -#define TER_RESISTOR_HIGH BIT(7) -#define TER_RESISTOR_LOW 0 -#define LEVEL_SHIFTERS_ON BIT(6) -#define TER_CAL_DONE BIT(5) -#define SETRD_MAX (0x7 << 2) -#define POWER_MANAGE BIT(1) -#define TER_RESISTORS_ON BIT(0) - -#define BIASEXTR_SEL(val) ((val) & 0x7) -#define BANDGAP_SEL(val) ((val) & 0x7) -#define TLP_PROGRAM_EN BIT(7) -#define THS_PRE_PROGRAM_EN BIT(7) -#define THS_ZERO_PROGRAM_EN BIT(6) - -#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0) -#define DW_MIPI_NEEDS_GRF_CLK BIT(1) - -enum { - BANDGAP_97_07, - BANDGAP_98_05, - BANDGAP_99_02, - BANDGAP_100_00, - BANDGAP_93_17, - BANDGAP_94_15, - BANDGAP_95_12, - BANDGAP_96_10, -}; - -enum { - BIASEXTR_87_1, - BIASEXTR_91_5, - BIASEXTR_95_9, - BIASEXTR_100, - BIASEXTR_105_94, - BIASEXTR_111_88, - BIASEXTR_118_8, - BIASEXTR_127_7, -}; - -struct dw_mipi_dsi_plat_data { - u32 dsi0_en_bit; - u32 dsi1_en_bit; - u32 grf_switch_reg; - u32 grf_dsi0_mode; - u32 grf_dsi0_mode_reg; - unsigned int flags; - unsigned int max_data_lanes; -}; - -struct dw_mipi_dsi { - struct drm_encoder encoder; - struct drm_connector connector; - struct mipi_dsi_host dsi_host; - struct drm_panel *panel; - struct device *dev; - struct regmap *grf_regmap; - void __iomem *base; - - struct clk *grf_clk; - struct clk *pllref_clk; - struct clk *pclk; - struct clk *phy_cfg_clk; - - int dpms_mode; - unsigned int lane_mbps; /* per lane */ - u32 channel; - u32 lanes; - u32 format; - u16 input_div; - u16 feedback_div; - unsigned long mode_flags; - - const struct dw_mipi_dsi_plat_data *pdata; -}; - -enum dw_mipi_dsi_mode { - DW_MIPI_DSI_CMD_MODE, - DW_MIPI_DSI_VID_MODE, -}; - -struct dphy_pll_testdin_map { - unsigned int max_mbps; - u8 testdin; -}; - -/* The table is based on 27MHz DPHY pll reference clock. */ -static const struct dphy_pll_testdin_map dptdin_map[] = { - { 90, 0x00}, { 100, 0x10}, { 110, 0x20}, { 130, 0x01}, - { 140, 0x11}, { 150, 0x21}, { 170, 0x02}, { 180, 0x12}, - { 200, 0x22}, { 220, 0x03}, { 240, 0x13}, { 250, 0x23}, - { 270, 0x04}, { 300, 0x14}, { 330, 0x05}, { 360, 0x15}, - { 400, 0x25}, { 450, 0x06}, { 500, 0x16}, { 550, 0x07}, - { 600, 0x17}, { 650, 0x08}, { 700, 0x18}, { 750, 0x09}, - { 800, 0x19}, { 850, 0x29}, { 900, 0x39}, { 950, 0x0a}, - {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b}, - {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c}, - {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} -}; - -static int max_mbps_to_testdin(unsigned int max_mbps) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) - if (dptdin_map[i].max_mbps > max_mbps) - return dptdin_map[i].testdin; - - return -EINVAL; -} - -/* - * The controller should generate 2 frames before - * preparing the peripheral. - */ -static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode) -{ - int refresh, two_frames; - - refresh = drm_mode_vrefresh(mode); - two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2; - msleep(two_frames); -} - -static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host) -{ - return container_of(host, struct dw_mipi_dsi, dsi_host); -} - -static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con) -{ - return container_of(con, struct dw_mipi_dsi, connector); -} - -static inline struct dw_mipi_dsi *encoder_to_dsi(struct drm_encoder *encoder) -{ - return container_of(encoder, struct dw_mipi_dsi, encoder); -} - -static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val) -{ - writel(val, dsi->base + reg); -} - -static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg) -{ - return readl(dsi->base + reg); -} - -static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code, - u8 test_data) -{ - /* - * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content - * is latched internally as the current test code. Test data is - * programmed internally by rising edge on TESTCLK. - */ - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); - - dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | - PHY_TESTDIN(test_code)); - - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); - - dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | - PHY_TESTDIN(test_data)); - - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); -} - -/** - * ns2bc - Nanoseconds to byte clock cycles - */ -static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns) -{ - return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); -} - -/** - * ns2ui - Nanoseconds to UI time periods - */ -static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns) -{ - return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); -} - -static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) -{ - int ret, testdin, vco, val; - - vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; - - testdin = max_mbps_to_testdin(dsi->lane_mbps); - if (testdin < 0) { - DRM_DEV_ERROR(dsi->dev, - "failed to get testdin for %dmbps lane clock\n", - dsi->lane_mbps); - return testdin; - } - - /* Start by clearing PHY state */ - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR); - dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); - - ret = clk_prepare_enable(dsi->phy_cfg_clk); - if (ret) { - DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); - return ret; - } - - dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE | - VCO_RANGE_CON_SEL(vco) | - VCO_IN_CAP_CON_LOW | - REF_BIAS_CUR_SEL); - - dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA); - dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN | - LPF_RESISTORS_20_KOHM); - - dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin)); - - dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div)); - dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) | - LOW_PROGRAM_EN); - dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) | - HIGH_PROGRAM_EN); - dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); - - dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN | - BIASEXTR_SEL(BIASEXTR_127_7)); - dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN | - BANDGAP_SEL(BANDGAP_96_10)); - - dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT | - BIAS_BLOCK_ON | BANDGAP_ON); - - dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE | - SETRD_MAX | TER_RESISTORS_ON); - dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON | - SETRD_MAX | POWER_MANAGE | - TER_RESISTORS_ON); - - dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500)); - dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); - dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); - dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); - dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100)); - dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7)); - - dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500)); - dw_mipi_dsi_phy_write(dsi, 0x71, - THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5)); - dw_mipi_dsi_phy_write(dsi, 0x72, - THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); - dw_mipi_dsi_phy_write(dsi, 0x73, - THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); - dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100)); - - dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK | - PHY_UNRSTZ | PHY_UNSHUTDOWNZ); - - ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, - val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US); - if (ret < 0) { - DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n"); - goto phy_init_end; - } - - ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, - val, val & STOP_STATE_CLK_LANE, 1000, - PHY_STATUS_TIMEOUT_US); - if (ret < 0) - DRM_DEV_ERROR(dsi->dev, - "failed to wait for phy clk lane stop state\n"); - -phy_init_end: - clk_disable_unprepare(dsi->phy_cfg_clk); - - return ret; -} - -static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode) -{ - unsigned int i, pre; - unsigned long mpclk, pllref, tmp; - unsigned int m = 1, n = 1, target_mbps = 1000; - unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps; - int bpp; - - bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); - if (bpp < 0) { - DRM_DEV_ERROR(dsi->dev, - "failed to get bpp for pixel format %d\n", - dsi->format); - return bpp; - } - - mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); - if (mpclk) { - /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ - tmp = mpclk * (bpp / dsi->lanes) * 10 / 8; - if (tmp < max_mbps) - target_mbps = tmp; - else - DRM_DEV_ERROR(dsi->dev, - "DPHY clock frequency is out of range\n"); - } - - pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC); - tmp = pllref; - - /* - * The limits on the PLL divisor are: - * - * 5MHz <= (pllref / n) <= 40MHz - * - * we walk over these values in descreasing order so that if we hit - * an exact match for target_mbps it is more likely that "m" will be - * even. - * - * TODO: ensure that "m" is even after this loop. - */ - for (i = pllref / 5; i > (pllref / 40); i--) { - pre = pllref / i; - if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) { - tmp = target_mbps % pre; - n = i; - m = target_mbps / pre; - } - if (tmp == 0) - break; - } - - dsi->lane_mbps = pllref / n * m; - dsi->input_div = n; - dsi->feedback_div = m; - - return 0; -} - -static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host, - struct mipi_dsi_device *device) -{ - struct dw_mipi_dsi *dsi = host_to_dsi(host); - - if (device->lanes > dsi->pdata->max_data_lanes) { - DRM_DEV_ERROR(dsi->dev, - "the number of data lanes(%u) is too many\n", - device->lanes); - return -EINVAL; - } - - dsi->lanes = device->lanes; - dsi->channel = device->channel; - dsi->format = device->format; - dsi->mode_flags = device->mode_flags; - dsi->panel = of_drm_find_panel(device->dev.of_node); - if (dsi->panel) - return drm_panel_attach(dsi->panel, &dsi->connector); - - return -EINVAL; -} - -static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host, - struct mipi_dsi_device *device) -{ - struct dw_mipi_dsi *dsi = host_to_dsi(host); - - drm_panel_detach(dsi->panel); - - return 0; -} - -static void dw_mipi_message_config(struct dw_mipi_dsi *dsi, - const struct mipi_dsi_msg *msg) -{ - bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM; - u32 val = 0; - - if (msg->flags & MIPI_DSI_MSG_REQ_ACK) - val |= EN_ACK_RQST; - if (lpm) - val |= CMD_MODE_ALL_LP; - - dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS); - dsi_write(dsi, DSI_CMD_MODE_CFG, val); -} - -static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val) -{ - int ret; - u32 val, mask; - - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, - val, !(val & GEN_CMD_FULL), 1000, - CMD_PKT_STATUS_TIMEOUT_US); - if (ret < 0) { - DRM_DEV_ERROR(dsi->dev, - "failed to get available command FIFO\n"); - return ret; - } - - dsi_write(dsi, DSI_GEN_HDR, hdr_val); - - mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY; - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, - val, (val & mask) == mask, - 1000, CMD_PKT_STATUS_TIMEOUT_US); - if (ret < 0) { - DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n"); - return ret; - } - - return 0; -} - -static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi, - const struct mipi_dsi_msg *msg) -{ - const u8 *tx_buf = msg->tx_buf; - u16 data = 0; - u32 val; - - if (msg->tx_len > 0) - data |= tx_buf[0]; - if (msg->tx_len > 1) - data |= tx_buf[1] << 8; - - if (msg->tx_len > 2) { - DRM_DEV_ERROR(dsi->dev, - "too long tx buf length %zu for short write\n", - msg->tx_len); - return -EINVAL; - } - - val = GEN_HDATA(data) | GEN_HTYPE(msg->type); - return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val); -} - -static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi, - const struct mipi_dsi_msg *msg) -{ - const u8 *tx_buf = msg->tx_buf; - int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret; - u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type); - u32 remainder; - u32 val; - - if (msg->tx_len < 3) { - DRM_DEV_ERROR(dsi->dev, - "wrong tx buf length %zu for long write\n", - msg->tx_len); - return -EINVAL; - } - - while (DIV_ROUND_UP(len, pld_data_bytes)) { - if (len < pld_data_bytes) { - remainder = 0; - memcpy(&remainder, tx_buf, len); - dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); - len = 0; - } else { - memcpy(&remainder, tx_buf, pld_data_bytes); - dsi_write(dsi, DSI_GEN_PLD_DATA, remainder); - tx_buf += pld_data_bytes; - len -= pld_data_bytes; - } - - ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS, - val, !(val & GEN_PLD_W_FULL), 1000, - CMD_PKT_STATUS_TIMEOUT_US); - if (ret < 0) { - DRM_DEV_ERROR(dsi->dev, - "failed to get available write payload FIFO\n"); - return ret; - } - } - - return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val); -} - -static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host, - const struct mipi_dsi_msg *msg) -{ - struct dw_mipi_dsi *dsi = host_to_dsi(host); - int ret; - - dw_mipi_message_config(dsi, msg); - - switch (msg->type) { - case MIPI_DSI_DCS_SHORT_WRITE: - case MIPI_DSI_DCS_SHORT_WRITE_PARAM: - case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: - ret = dw_mipi_dsi_dcs_short_write(dsi, msg); - break; - case MIPI_DSI_DCS_LONG_WRITE: - ret = dw_mipi_dsi_dcs_long_write(dsi, msg); - break; - default: - DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n", - msg->type); - ret = -EINVAL; - } - - return ret; -} - -static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = { - .attach = dw_mipi_dsi_host_attach, - .detach = dw_mipi_dsi_host_detach, - .transfer = dw_mipi_dsi_host_transfer, -}; - -static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi) -{ - u32 val; - - val = ENABLE_LOW_POWER; - - if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) - val |= VID_MODE_TYPE_BURST; - else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) - val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES; - else - val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS; - - dsi_write(dsi, DSI_VID_MODE_CFG, val); -} - -static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi, - enum dw_mipi_dsi_mode mode) -{ - if (mode == DW_MIPI_DSI_CMD_MODE) { - dsi_write(dsi, DSI_PWR_UP, RESET); - dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); - dsi_write(dsi, DSI_PWR_UP, POWERUP); - } else { - dsi_write(dsi, DSI_PWR_UP, RESET); - dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE); - dw_mipi_dsi_video_mode_config(dsi); - dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS); - dsi_write(dsi, DSI_PWR_UP, POWERUP); - } -} - -static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) -{ - dsi_write(dsi, DSI_PWR_UP, RESET); - dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ); -} - -static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) -{ - /* - * The maximum permitted escape clock is 20MHz and it is derived from - * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: - * - * (lane_mbps >> 3) / esc_clk_division < 20 - * which is: - * (lane_mbps >> 3) / 20 > esc_clk_division - */ - u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; - - dsi_write(dsi, DSI_PWR_UP, RESET); - dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK - | PHY_RSTZ | PHY_SHUTDOWNZ); - dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) | - TX_ESC_CLK_DIVIDSION(esc_clk_division)); -} - -static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode) -{ - u32 val = 0, color = 0; - - switch (dsi->format) { - case MIPI_DSI_FMT_RGB888: - color = DPI_COLOR_CODING_24BIT; - break; - case MIPI_DSI_FMT_RGB666: - color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY; - break; - case MIPI_DSI_FMT_RGB666_PACKED: - color = DPI_COLOR_CODING_18BIT_1; - break; - case MIPI_DSI_FMT_RGB565: - color = DPI_COLOR_CODING_16BIT_1; - break; - } - - if (mode->flags & DRM_MODE_FLAG_NVSYNC) - val |= VSYNC_ACTIVE_LOW; - if (mode->flags & DRM_MODE_FLAG_NHSYNC) - val |= HSYNC_ACTIVE_LOW; - - dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel)); - dsi_write(dsi, DSI_DPI_COLOR_CODING, color); - dsi_write(dsi, DSI_DPI_CFG_POL, val); - dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4) - | INVACT_LPCMD_TIME(4)); -} - -static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi) -{ - dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA); -} - -static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode) -{ - dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay)); -} - -static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi) -{ - dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000)); - dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00); - dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE); -} - -/* Get lane byte clock cycles. */ -static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode, - u32 hcomponent) -{ - u32 frac, lbcc; - - lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8; - - frac = lbcc % mode->clock; - lbcc = lbcc / mode->clock; - if (frac) - lbcc++; - - return lbcc; -} - -static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode) -{ - u32 htotal, hsa, hbp, lbcc; - - htotal = mode->htotal; - hsa = mode->hsync_end - mode->hsync_start; - hbp = mode->htotal - mode->hsync_end; - - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal); - dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc); - - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa); - dsi_write(dsi, DSI_VID_HSA_TIME, lbcc); - - lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp); - dsi_write(dsi, DSI_VID_HBP_TIME, lbcc); -} - -static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi, - struct drm_display_mode *mode) -{ - u32 vactive, vsa, vfp, vbp; - - vactive = mode->vdisplay; - vsa = mode->vsync_end - mode->vsync_start; - vfp = mode->vsync_start - mode->vdisplay; - vbp = mode->vtotal - mode->vsync_end; - - dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive); - dsi_write(dsi, DSI_VID_VSA_LINES, vsa); - dsi_write(dsi, DSI_VID_VFP_LINES, vfp); - dsi_write(dsi, DSI_VID_VBP_LINES, vbp); -} - -static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi) -{ - dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) - | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000)); - - dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40) - | PHY_CLKLP2HS_TIME(0x40)); -} - -static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi) -{ - dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) | - N_LANES(dsi->lanes)); -} - -static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi) -{ - dsi_read(dsi, DSI_INT_ST0); - dsi_read(dsi, DSI_INT_ST1); - dsi_write(dsi, DSI_INT_MSK0, 0); - dsi_write(dsi, DSI_INT_MSK1, 0); -} - -static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder) -{ - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - - if (dsi->dpms_mode != DRM_MODE_DPMS_ON) - return; - - if (clk_prepare_enable(dsi->pclk)) { - DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); - return; - } - - drm_panel_disable(dsi->panel); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); - drm_panel_unprepare(dsi->panel); - - dw_mipi_dsi_disable(dsi); - pm_runtime_put(dsi->dev); - clk_disable_unprepare(dsi->pclk); - dsi->dpms_mode = DRM_MODE_DPMS_OFF; -} - -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) -{ - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; - const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata; - int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder); - u32 val; - int ret; - - ret = dw_mipi_dsi_get_lane_bps(dsi, mode); - if (ret < 0) - return; - - if (dsi->dpms_mode == DRM_MODE_DPMS_ON) - return; - - if (clk_prepare_enable(dsi->pclk)) { - DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n"); - return; - } - - pm_runtime_get_sync(dsi->dev); - dw_mipi_dsi_init(dsi); - dw_mipi_dsi_dpi_config(dsi, mode); - dw_mipi_dsi_packet_handler_config(dsi); - dw_mipi_dsi_video_mode_config(dsi); - dw_mipi_dsi_video_packet_config(dsi, mode); - dw_mipi_dsi_command_mode_config(dsi); - dw_mipi_dsi_line_timer_config(dsi, mode); - dw_mipi_dsi_vertical_timing_config(dsi, mode); - dw_mipi_dsi_dphy_timing_config(dsi); - dw_mipi_dsi_dphy_interface_config(dsi); - dw_mipi_dsi_clear_err(dsi); - - /* - * For the RK3399, the clk of grf must be enabled before writing grf - * register. And for RK3288 or other soc, this grf_clk must be NULL, - * the clk_prepare_enable return true directly. - */ - ret = clk_prepare_enable(dsi->grf_clk); - if (ret) { - DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); - return; - } - - if (pdata->grf_dsi0_mode_reg) - regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg, - pdata->grf_dsi0_mode); - - dw_mipi_dsi_phy_init(dsi); - dw_mipi_dsi_wait_for_two_frames(mode); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); - if (drm_panel_prepare(dsi->panel)) - DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n"); - - dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); - drm_panel_enable(dsi->panel); - - clk_disable_unprepare(dsi->pclk); - - if (mux) - val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16); - else - val = pdata->dsi0_en_bit << 16; - - regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val); - DRM_DEV_DEBUG(dsi->dev, - "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG"); - dsi->dpms_mode = DRM_MODE_DPMS_ON; - - clk_disable_unprepare(dsi->grf_clk); -} - -static int -dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, - struct drm_crtc_state *crtc_state, - struct drm_connector_state *conn_state) -{ - struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); - struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder); - - switch (dsi->format) { - case MIPI_DSI_FMT_RGB888: - s->output_mode = ROCKCHIP_OUT_MODE_P888; - break; - case MIPI_DSI_FMT_RGB666: - s->output_mode = ROCKCHIP_OUT_MODE_P666; - break; - case MIPI_DSI_FMT_RGB565: - s->output_mode = ROCKCHIP_OUT_MODE_P565; - break; - default: - WARN_ON(1); - return -EINVAL; - } - - s->output_type = DRM_MODE_CONNECTOR_DSI; - - return 0; -} - -static const struct drm_encoder_helper_funcs -dw_mipi_dsi_encoder_helper_funcs = { - .enable = dw_mipi_dsi_encoder_enable, - .disable = dw_mipi_dsi_encoder_disable, - .atomic_check = dw_mipi_dsi_encoder_atomic_check, -}; - -static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector) -{ - struct dw_mipi_dsi *dsi = con_to_dsi(connector); - - return drm_panel_get_modes(dsi->panel); -} - -static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = { - .get_modes = dw_mipi_dsi_connector_get_modes, -}; - -static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector) -{ - drm_connector_unregister(connector); - drm_connector_cleanup(connector); -} - -static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = dw_mipi_dsi_drm_connector_destroy, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int dw_mipi_dsi_register(struct drm_device *drm, - struct dw_mipi_dsi *dsi) -{ - struct drm_encoder *encoder = &dsi->encoder; - struct drm_connector *connector = &dsi->connector; - struct device *dev = dsi->dev; - int ret; - - encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, - dev->of_node); - /* - * If we failed to find the CRTC(s) which this encoder is - * supposed to be connected to, it's because the CRTC has - * not been registered yet. Defer probing, and hope that - * the required CRTC is added later. - */ - if (encoder->possible_crtcs == 0) - return -EPROBE_DEFER; - - drm_encoder_helper_add(&dsi->encoder, - &dw_mipi_dsi_encoder_helper_funcs); - ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs, - DRM_MODE_ENCODER_DSI, NULL); - if (ret) { - DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n"); - return ret; - } - - drm_connector_helper_add(connector, - &dw_mipi_dsi_connector_helper_funcs); - - drm_connector_init(drm, &dsi->connector, - &dw_mipi_dsi_atomic_connector_funcs, - DRM_MODE_CONNECTOR_DSI); - - drm_mode_connector_attach_encoder(connector, encoder); - - return 0; -} - -static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi) -{ - struct device_node *np = dsi->dev->of_node; - - dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); - if (IS_ERR(dsi->grf_regmap)) { - DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n"); - return PTR_ERR(dsi->grf_regmap); - } - - return 0; -} - -static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = { - .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, - .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, - .grf_switch_reg = RK3288_GRF_SOC_CON6, - .max_data_lanes = 4, -}; - -static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = { - .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, - .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, - .grf_switch_reg = RK3399_GRF_SOC_CON20, - .grf_dsi0_mode = RK3399_GRF_DSI_MODE, - .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, - .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, - .max_data_lanes = 4, -}; - -static const struct of_device_id dw_mipi_dsi_dt_ids[] = { - { - .compatible = "rockchip,rk3288-mipi-dsi", - .data = &rk3288_mipi_dsi_drv_data, - }, { - .compatible = "rockchip,rk3399-mipi-dsi", - .data = &rk3399_mipi_dsi_drv_data, - }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids); - -static int dw_mipi_dsi_bind(struct device *dev, struct device *master, - void *data) -{ - const struct of_device_id *of_id = - of_match_device(dw_mipi_dsi_dt_ids, dev); - const struct dw_mipi_dsi_plat_data *pdata = of_id->data; - struct platform_device *pdev = to_platform_device(dev); - struct reset_control *apb_rst; - struct drm_device *drm = data; - struct dw_mipi_dsi *dsi; - struct resource *res; - int ret; - - dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); - if (!dsi) - return -ENOMEM; - - dsi->dev = dev; - dsi->pdata = pdata; - dsi->dpms_mode = DRM_MODE_DPMS_OFF; - - ret = rockchip_mipi_parse_dt(dsi); - if (ret) - return ret; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - dsi->base = devm_ioremap_resource(dev, res); - if (IS_ERR(dsi->base)) - return PTR_ERR(dsi->base); - - dsi->pllref_clk = devm_clk_get(dev, "ref"); - if (IS_ERR(dsi->pllref_clk)) { - ret = PTR_ERR(dsi->pllref_clk); - DRM_DEV_ERROR(dev, - "Unable to get pll reference clock: %d\n", ret); - return ret; - } - - dsi->pclk = devm_clk_get(dev, "pclk"); - if (IS_ERR(dsi->pclk)) { - ret = PTR_ERR(dsi->pclk); - DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret); - return ret; - } - - /* - * Note that the reset was not defined in the initial device tree, so - * we have to be prepared for it not being found. - */ - apb_rst = devm_reset_control_get(dev, "apb"); - if (IS_ERR(apb_rst)) { - ret = PTR_ERR(apb_rst); - if (ret == -ENOENT) { - apb_rst = NULL; - } else { - DRM_DEV_ERROR(dev, - "Unable to get reset control: %d\n", ret); - return ret; - } - } - - if (apb_rst) { - ret = clk_prepare_enable(dsi->pclk); - if (ret) { - DRM_DEV_ERROR(dev, "Failed to enable pclk\n"); - return ret; - } - - reset_control_assert(apb_rst); - usleep_range(10, 20); - reset_control_deassert(apb_rst); - - clk_disable_unprepare(dsi->pclk); - } - - if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) { - dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg"); - if (IS_ERR(dsi->phy_cfg_clk)) { - ret = PTR_ERR(dsi->phy_cfg_clk); - DRM_DEV_ERROR(dev, - "Unable to get phy_cfg_clk: %d\n", ret); - return ret; - } - } - - if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) { - dsi->grf_clk = devm_clk_get(dev, "grf"); - if (IS_ERR(dsi->grf_clk)) { - ret = PTR_ERR(dsi->grf_clk); - DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret); - return ret; - } - } - - ret = clk_prepare_enable(dsi->pllref_clk); - if (ret) { - DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n"); - return ret; - } - - ret = dw_mipi_dsi_register(drm, dsi); - if (ret) { - DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret); - goto err_pllref; - } - - pm_runtime_enable(dev); - - dsi->dsi_host.ops = &dw_mipi_dsi_host_ops; - dsi->dsi_host.dev = dev; - ret = mipi_dsi_host_register(&dsi->dsi_host); - if (ret) { - DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret); - goto err_cleanup; - } - - if (!dsi->panel) { - ret = -EPROBE_DEFER; - goto err_mipi_dsi_host; - } - - dev_set_drvdata(dev, dsi); - return 0; - -err_mipi_dsi_host: - mipi_dsi_host_unregister(&dsi->dsi_host); -err_cleanup: - drm_encoder_cleanup(&dsi->encoder); - drm_connector_cleanup(&dsi->connector); -err_pllref: - clk_disable_unprepare(dsi->pllref_clk); - return ret; -} - -static void dw_mipi_dsi_unbind(struct device *dev, struct device *master, - void *data) -{ - struct dw_mipi_dsi *dsi = dev_get_drvdata(dev); - - mipi_dsi_host_unregister(&dsi->dsi_host); - pm_runtime_disable(dev); - clk_disable_unprepare(dsi->pllref_clk); -} - -static const struct component_ops dw_mipi_dsi_ops = { - .bind = dw_mipi_dsi_bind, - .unbind = dw_mipi_dsi_unbind, -}; - -static int dw_mipi_dsi_probe(struct platform_device *pdev) -{ - return component_add(&pdev->dev, &dw_mipi_dsi_ops); -} - -static int dw_mipi_dsi_remove(struct platform_device *pdev) -{ - component_del(&pdev->dev, &dw_mipi_dsi_ops); - return 0; -} - -struct platform_driver dw_mipi_dsi_driver = { - .probe = dw_mipi_dsi_probe, - .remove = dw_mipi_dsi_remove, - .driver = { - .of_match_table = dw_mipi_dsi_dt_ids, - .name = DRIVER_NAME, - }, -}; diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c new file mode 100644 index 0000000..c919d4f --- /dev/null +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c @@ -0,0 +1,756 @@ +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: + * Chris Zhong <zyw@rock-chips.com> + * Nickey Yang <nickey.yang@rock-chips.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/bridge/dw_mipi_dsi.h> +#include <video/mipi_display.h> +#include <linux/regmap.h> +#include <drm/drm_of.h> +#include <linux/mfd/syscon.h> + +#include "rockchip_drm_drv.h" +#include "rockchip_drm_vop.h" + +#define DSI_PHY_TST_CTRL0 0xb4 +#define PHY_TESTCLK BIT(1) +#define PHY_UNTESTCLK 0 +#define PHY_TESTCLR BIT(0) +#define PHY_UNTESTCLR 0 + +#define DSI_PHY_TST_CTRL1 0xb8 +#define PHY_TESTEN BIT(16) +#define PHY_UNTESTEN 0 +#define PHY_TESTDOUT(n) (((n) & 0xff) << 8) +#define PHY_TESTDIN(n) (((n) & 0xff) << 0) + +#define BYPASS_VCO_RANGE BIT(7) +#define VCO_RANGE_CON_SEL(val) (((val) & 0x7) << 3) +#define VCO_IN_CAP_CON_DEFAULT (0x0 << 1) +#define VCO_IN_CAP_CON_LOW (0x1 << 1) +#define VCO_IN_CAP_CON_HIGH (0x2 << 1) +#define REF_BIAS_CUR_SEL BIT(0) + +#define CP_CURRENT_3UA 0x1 +#define CP_CURRENT_4_5UA 0x2 +#define CP_CURRENT_7_5UA 0x6 +#define CP_CURRENT_6UA 0x9 +#define CP_CURRENT_12UA 0xb +#define CP_CURRENT_SEL(val) ((val) & 0xf) +#define CP_PROGRAM_EN BIT(7) + +#define LPF_RESISTORS_15_5KOHM 0x1 +#define LPF_RESISTORS_13KOHM 0x2 +#define LPF_RESISTORS_11_5KOHM 0x4 +#define LPF_RESISTORS_10_5KOHM 0x8 +#define LPF_RESISTORS_8KOHM 0x10 +#define LPF_PROGRAM_EN BIT(6) +#define LPF_RESISTORS_SEL(val) ((val) & 0x3f) + +#define HSFREQRANGE_SEL(val) (((val) & 0x3f) << 1) + +#define INPUT_DIVIDER(val) (((val) - 1) & 0x7f) +#define LOW_PROGRAM_EN 0 +#define HIGH_PROGRAM_EN BIT(7) +#define LOOP_DIV_LOW_SEL(val) (((val) - 1) & 0x1f) +#define LOOP_DIV_HIGH_SEL(val) ((((val) - 1) >> 5) & 0xf) +#define PLL_LOOP_DIV_EN BIT(5) +#define PLL_INPUT_DIV_EN BIT(4) + +#define POWER_CONTROL BIT(6) +#define INTERNAL_REG_CURRENT BIT(3) +#define BIAS_BLOCK_ON BIT(2) +#define BANDGAP_ON BIT(0) + +#define TER_RESISTOR_HIGH BIT(7) +#define TER_RESISTOR_LOW 0 +#define LEVEL_SHIFTERS_ON BIT(6) +#define TER_CAL_DONE BIT(5) +#define SETRD_MAX (0x7 << 2) +#define POWER_MANAGE BIT(1) +#define TER_RESISTORS_ON BIT(0) + +#define BIASEXTR_SEL(val) ((val) & 0x7) +#define BANDGAP_SEL(val) ((val) & 0x7) +#define TLP_PROGRAM_EN BIT(7) +#define THS_PRE_PROGRAM_EN BIT(7) +#define THS_ZERO_PROGRAM_EN BIT(6) + +#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL 0x10 +#define PLL_CP_CONTROL_PLL_LOCK_BYPASS 0x11 +#define PLL_LPF_AND_CP_CONTROL 0x12 +#define PLL_INPUT_DIVIDER_RATIO 0x17 +#define PLL_LOOP_DIVIDER_RATIO 0x18 +#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL 0x19 +#define BANDGAP_AND_BIAS_CONTROL 0x20 +#define TERMINATION_RESISTER_CONTROL 0x21 +#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY 0x22 +#define HS_RX_CONTROL_OF_LANE_0 0x44 +#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL 0x60 +#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL 0x61 +#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL 0x62 +#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL 0x63 +#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL 0x64 +#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL 0x65 +#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL 0x70 +#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL 0x71 +#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL 0x72 +#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL 0x73 +#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL 0x74 + +#define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0) +#define DW_MIPI_NEEDS_GRF_CLK BIT(1) + +#define RK3288_GRF_SOC_CON6 0x025c +#define RK3288_DSI0_SEL_VOP_LIT BIT(6) +#define RK3288_DSI1_SEL_VOP_LIT BIT(9) + +#define RK3399_GRF_SOC_CON20 0x6250 +#define RK3399_DSI0_SEL_VOP_LIT BIT(0) +#define RK3399_DSI1_SEL_VOP_LIT BIT(4) + +/* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */ +#define RK3399_GRF_SOC_CON22 0x6258 +#define RK3399_GRF_DSI_MODE 0xffff0000 + +#define to_dsi(nm) container_of(nm, struct dw_mipi_dsi_rockchip, nm) + +enum { + BANDGAP_97_07, + BANDGAP_98_05, + BANDGAP_99_02, + BANDGAP_100_00, + BANDGAP_93_17, + BANDGAP_94_15, + BANDGAP_95_12, + BANDGAP_96_10, +}; + +enum { + BIASEXTR_87_1, + BIASEXTR_91_5, + BIASEXTR_95_9, + BIASEXTR_100, + BIASEXTR_105_94, + BIASEXTR_111_88, + BIASEXTR_118_8, + BIASEXTR_127_7, +}; + +struct rockchip_dw_dsi_chip_data { + u32 dsi0_en_bit; + u32 dsi1_en_bit; + u32 grf_switch_reg; + u32 grf_dsi0_mode; + u32 grf_dsi0_mode_reg; + unsigned int flags; + unsigned int max_data_lanes; +}; + +struct dw_mipi_dsi_rockchip { + struct device *dev; + struct drm_encoder encoder; + void __iomem *base; + + struct regmap *grf_regmap; + struct clk *pllref_clk; + struct clk *grf_clk; + struct clk *phy_cfg_clk; + + unsigned int lane_mbps; /* per lane */ + u16 input_div; + u16 feedback_div; + u32 format; + + const struct rockchip_dw_dsi_chip_data *cdata; + struct dw_mipi_dsi_plat_data pdata; +}; + +struct dphy_pll_parameter_map { + unsigned int max_mbps; + u8 hsfreqrange; + u8 icpctrl; + u8 lpfctrl; +}; + +/* The table is based on 27MHz DPHY pll reference clock. */ +static const struct dphy_pll_parameter_map dppa_map[] = { + { 89, 0x00, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, + { 99, 0x10, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, + { 109, 0x20, CP_CURRENT_3UA, LPF_RESISTORS_13KOHM}, + { 129, 0x01, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 139, 0x11, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 149, 0x21, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 169, 0x02, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, + { 179, 0x12, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, + { 199, 0x22, CP_CURRENT_6UA, LPF_RESISTORS_13KOHM}, + { 219, 0x03, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, + { 239, 0x13, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, + { 249, 0x23, CP_CURRENT_4_5UA, LPF_RESISTORS_13KOHM}, + { 269, 0x04, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, + { 299, 0x14, CP_CURRENT_6UA, LPF_RESISTORS_11_5KOHM}, + { 329, 0x05, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 359, 0x15, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 399, 0x25, CP_CURRENT_3UA, LPF_RESISTORS_15_5KOHM}, + { 449, 0x06, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 499, 0x16, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 549, 0x07, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, + { 599, 0x17, CP_CURRENT_7_5UA, LPF_RESISTORS_10_5KOHM}, + { 649, 0x08, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 699, 0x18, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 749, 0x09, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 799, 0x19, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 849, 0x29, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 899, 0x39, CP_CURRENT_7_5UA, LPF_RESISTORS_11_5KOHM}, + { 949, 0x0a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, + { 999, 0x1a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, + {1049, 0x2a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, + {1099, 0x3a, CP_CURRENT_12UA, LPF_RESISTORS_8KOHM}, + {1149, 0x0b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1199, 0x1b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1249, 0x2b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1299, 0x3b, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1349, 0x0c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1399, 0x1c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1449, 0x2c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM}, + {1500, 0x3c, CP_CURRENT_12UA, LPF_RESISTORS_10_5KOHM} +}; + +static int max_mbps_to_parameter(unsigned int max_mbps) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(dppa_map); i++) + if (dppa_map[i].max_mbps >= max_mbps) + return i; + + return -EINVAL; +} + +static inline void dsi_write(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 val) +{ + writel(val, dsi->base + reg); +} + +static inline u32 dsi_read(struct dw_mipi_dsi_rockchip *dsi, u32 reg) +{ + return readl(dsi->base + reg); +} + +static inline void dsi_set(struct dw_mipi_dsi_rockchip *dsi, u32 reg, u32 mask) +{ + dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); +} + +static inline void dsi_update_bits(struct dw_mipi_dsi_rockchip *dsi, u32 reg, + u32 mask, u32 val) +{ + dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); +} + +static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi_rockchip *dsi, + u8 test_code, + u8 test_data) +{ + /* + * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content + * is latched internally as the current test code. Test data is + * programmed internally by rising edge on TESTCLK. + */ + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); + + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | + PHY_TESTDIN(test_code)); + + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); + + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | + PHY_TESTDIN(test_data)); + + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); +} + +/** + * ns2bc - Nanoseconds to byte clock cycles + */ +static inline unsigned int ns2bc(struct dw_mipi_dsi_rockchip *dsi, int ns) +{ + return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000); +} + +/** + * ns2ui - Nanoseconds to UI time periods + */ +static inline unsigned int ns2ui(struct dw_mipi_dsi_rockchip *dsi, int ns) +{ + return DIV_ROUND_UP(ns * dsi->lane_mbps, 1000); +} + +static int dw_mipi_dsi_phy_init(void *priv_data) +{ + struct dw_mipi_dsi_rockchip *dsi = priv_data; + int ret, i, vco; + + vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200; + + i = max_mbps_to_parameter(dsi->lane_mbps); + if (i < 0) { + DRM_DEV_ERROR(dsi->dev, + "failed to get parameter for %dmbps clock\n", + dsi->lane_mbps); + return i; + } + + ret = clk_prepare_enable(dsi->phy_cfg_clk); + if (ret) { + DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n"); + return ret; + } + + dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL, + BYPASS_VCO_RANGE | + VCO_RANGE_CON_SEL(vco) | + VCO_IN_CAP_CON_LOW | + REF_BIAS_CUR_SEL); + + dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS, + CP_CURRENT_SEL(dppa_map[i].icpctrl)); + dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL, + CP_PROGRAM_EN | LPF_PROGRAM_EN | + LPF_RESISTORS_SEL(dppa_map[i].lpfctrl)); + + dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0, + HSFREQRANGE_SEL(dppa_map[i].hsfreqrange)); + + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO, + INPUT_DIVIDER(dsi->input_div)); + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, + LOOP_DIV_LOW_SEL(dsi->feedback_div) | + LOW_PROGRAM_EN); + /* + * We need set PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL immediately + * to make the configured LSB effective according to IP simulation + * and lab test results. + * Only in this way can we get correct mipi phy pll frequency. + */ + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, + PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); + dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO, + LOOP_DIV_HIGH_SEL(dsi->feedback_div) | + HIGH_PROGRAM_EN); + dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL, + PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); + + dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, + LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7)); + dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY, + HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10)); + + dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL, + POWER_CONTROL | INTERNAL_REG_CURRENT | + BIAS_BLOCK_ON | BANDGAP_ON); + + dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, + TER_RESISTOR_LOW | TER_CAL_DONE | + SETRD_MAX | TER_RESISTORS_ON); + dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL, + TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON | + SETRD_MAX | POWER_MANAGE | + TER_RESISTORS_ON); + + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL, + TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL, + THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL, + THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL, + THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL, + BIT(5) | ns2bc(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL, + BIT(5) | (ns2bc(dsi, 60) + 7)); + + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL, + TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL, + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 20)); + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL, + THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL, + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); + dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL, + BIT(5) | ns2bc(dsi, 100)); + + clk_disable_unprepare(dsi->phy_cfg_clk); + + return ret; +} + +static int +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode, + unsigned long mode_flags, u32 lanes, u32 format, + unsigned int *lane_mbps) +{ + struct dw_mipi_dsi_rockchip *dsi = priv_data; + int bpp; + unsigned long mpclk, tmp; + unsigned int target_mbps = 1000; + unsigned int max_mbps = dppa_map[ARRAY_SIZE(dppa_map) - 1].max_mbps; + unsigned long best_freq = 0; + unsigned long fvco_min, fvco_max, fin, fout; + unsigned int min_prediv, max_prediv; + unsigned int _prediv, uninitialized_var(best_prediv); + unsigned long _fbdiv, uninitialized_var(best_fbdiv); + unsigned long min_delta = ULONG_MAX; + + dsi->format = format; + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); + if (bpp < 0) { + DRM_DEV_ERROR(dsi->dev, + "failed to get bpp for pixel format %d\n", + dsi->format); + return bpp; + } + + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); + if (mpclk) { + /* take 1 / 0.8, since mbps must big than bandwidth of RGB */ + tmp = mpclk * (bpp / lanes) * 10 / 8; + if (tmp < max_mbps) + target_mbps = tmp; + else + DRM_DEV_ERROR(dsi->dev, + "DPHY clock frequency is out of range\n"); + } + + fin = clk_get_rate(dsi->pllref_clk); + fout = target_mbps * USEC_PER_SEC; + + /* constraint: 5Mhz <= Fref / N <= 40MHz */ + min_prediv = DIV_ROUND_UP(fin, 40 * USEC_PER_SEC); + max_prediv = fin / (5 * USEC_PER_SEC); + + /* constraint: 80MHz <= Fvco <= 1500Mhz */ + fvco_min = 80 * USEC_PER_SEC; + fvco_max = 1500 * USEC_PER_SEC; + + for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { + u64 tmp; + u32 delta; + /* Fvco = Fref * M / N */ + tmp = (u64)fout * _prediv; + do_div(tmp, fin); + _fbdiv = tmp; + /* + * Due to the use of a "by 2 pre-scaler," the range of the + * feedback multiplication value M is limited to even division + * numbers, and m must be greater than 6, less than 512. + */ + if (_fbdiv < 6 || _fbdiv > 512) + continue; + + _fbdiv += _fbdiv % 2; + + tmp = (u64)_fbdiv * fin; + do_div(tmp, _prediv); + if (tmp < fvco_min || tmp > fvco_max) + continue; + + delta = abs(fout - tmp); + if (delta < min_delta) { + best_prediv = _prediv; + best_fbdiv = _fbdiv; + min_delta = delta; + best_freq = tmp; + } + } + + if (best_freq) { + dsi->lane_mbps = DIV_ROUND_UP(best_freq, USEC_PER_SEC); + *lane_mbps = dsi->lane_mbps; + dsi->input_div = best_prediv; + dsi->feedback_div = best_fbdiv; + } else { + DRM_DEV_ERROR(dsi->dev, "Can not find best_freq for DPHY\n"); + } + + return 0; +} + +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = { + .init = dw_mipi_dsi_phy_init, + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps, +}; + +static struct rockchip_dw_dsi_chip_data rk3288_chip_data = { + .dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT, + .dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT, + .grf_switch_reg = RK3288_GRF_SOC_CON6, + .max_data_lanes = 4, +}; + +static struct rockchip_dw_dsi_chip_data rk3399_chip_data = { + .dsi0_en_bit = RK3399_DSI0_SEL_VOP_LIT, + .dsi1_en_bit = RK3399_DSI1_SEL_VOP_LIT, + .grf_switch_reg = RK3399_GRF_SOC_CON20, + .grf_dsi0_mode = RK3399_GRF_DSI_MODE, + .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, + .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, + .max_data_lanes = 4, +}; + +static const struct of_device_id dw_mipi_dsi_rockchip_dt_ids[] = { + { + .compatible = "rockchip,rk3288-mipi-dsi", + .data = &rk3288_chip_data, + }, { + .compatible = "rockchip,rk3399-mipi-dsi", + .data = &rk3399_chip_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_rockchip_dt_ids); + +static void dw_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted) +{ + struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); + const struct rockchip_dw_dsi_chip_data *cdata = dsi->cdata; + int val, ret; + + ret = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, + &dsi->encoder); + if (ret < 0) + return; + /* + * For the RK3399, the clk of grf must be enabled before writing grf + * register. And for RK3288 or other soc, this grf_clk must be NULL, + * the clk_prepare_enable return true directly. + */ + ret = clk_prepare_enable(dsi->grf_clk); + if (ret) { + DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); + return; + } + + val = cdata->dsi0_en_bit << 16; + if (ret) + val |= cdata->dsi0_en_bit; + regmap_write(dsi->grf_regmap, cdata->grf_switch_reg, val); + + if (cdata->grf_dsi0_mode_reg) + regmap_write(dsi->grf_regmap, cdata->grf_dsi0_mode_reg, + cdata->grf_dsi0_mode); + + clk_disable_unprepare(dsi->grf_clk); +} + +static int +dw_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state); + struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder); + + switch (dsi->format) { + case MIPI_DSI_FMT_RGB888: + s->output_mode = ROCKCHIP_OUT_MODE_P888; + break; + case MIPI_DSI_FMT_RGB666: + s->output_mode = ROCKCHIP_OUT_MODE_P666; + break; + case MIPI_DSI_FMT_RGB565: + s->output_mode = ROCKCHIP_OUT_MODE_P565; + break; + default: + WARN_ON(1); + return -EINVAL; + } + + s->output_type = DRM_MODE_CONNECTOR_DSI; + + return 0; +} + +static const struct drm_encoder_helper_funcs +dw_mipi_dsi_encoder_helper_funcs = { + .mode_set = dw_mipi_dsi_encoder_mode_set, + .atomic_check = dw_mipi_dsi_encoder_atomic_check, +}; + +static const struct drm_encoder_funcs dw_mipi_dsi_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi, + struct drm_device *drm_dev) +{ + struct drm_encoder *encoder = &dsi->encoder; + int ret; + + encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev, + dsi->dev->of_node); + + ret = drm_encoder_init(drm_dev, encoder, &dw_mipi_dsi_encoder_funcs, + DRM_MODE_ENCODER_DSI, NULL); + if (ret) { + DRM_ERROR("Failed to initialize encoder with drm\n"); + return ret; + } + + drm_encoder_helper_add(encoder, &dw_mipi_dsi_encoder_helper_funcs); + + return 0; +} + +static int dw_mipi_dsi_rockchip_bind(struct device *dev, + struct device *master, + void *data) +{ + const struct of_device_id *of_id = + of_match_device(dw_mipi_dsi_rockchip_dt_ids, dev); + const struct rockchip_dw_dsi_chip_data *cdata = of_id->data; + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); + struct resource *res; + struct platform_device *pdev = to_platform_device(dev); + struct drm_device *drm_dev = data; + struct device_node *np = dev->of_node; + int ret; + + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); + if (!dsi) + return -ENOMEM; + + dsi->cdata = cdata; + dsi->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + DRM_ERROR("Unable to get resource\n"); + return -ENODEV; + } + + dsi->base = devm_ioremap_resource(dev, res); + if (IS_ERR(dsi->base)) { + DRM_ERROR("Unable to get dsi registers\n"); + return PTR_ERR(dsi->base); + } + + dsi->pllref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(dsi->pllref_clk)) { + ret = PTR_ERR(dsi->pllref_clk); + DRM_DEV_ERROR(dev, + "Unable to get pll reference clock: %d\n", ret); + return ret; + } + + if (cdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) { + dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg"); + if (IS_ERR(dsi->phy_cfg_clk)) { + ret = PTR_ERR(dsi->phy_cfg_clk); + DRM_DEV_ERROR(dev, + "Unable to get phy_cfg_clk: %d\n", ret); + return ret; + } + } + + if (cdata->flags & DW_MIPI_NEEDS_GRF_CLK) { + dsi->grf_clk = devm_clk_get(dev, "grf"); + if (IS_ERR(dsi->grf_clk)) { + ret = PTR_ERR(dsi->grf_clk); + DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret); + return ret; + } + } + + ret = clk_prepare_enable(dsi->pllref_clk); + if (ret) { + DRM_DEV_ERROR(dev, + "%s: Failed to enable pllref_clk\n", __func__); + return ret; + } + + dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(dsi->grf_regmap)) { + DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n"); + clk_disable_unprepare(dsi->pllref_clk); + return PTR_ERR(dsi->grf_regmap); + } + + dsi->pdata.base = dsi->base; + dsi->pdata.priv_data = dsi; + dsi->pdata.max_data_lanes = cdata->max_data_lanes; + dsi->pdata.phy_ops = &dw_mipi_dsi_rockchip_phy_ops; + + ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev); + if (ret) { + DRM_ERROR("Failed to create drm encoder\n"); + goto err_pllref; + } + ret = dw_mipi_dsi_bind(pdev, &dsi->encoder, &dsi->pdata); + if (ret) { + DRM_ERROR("Failed to bind\n"); + goto err_pllref; + } + return 0; + +err_pllref: + clk_disable_unprepare(dsi->pllref_clk); + return ret; +} + +static void dw_mipi_dsi_rockchip_unbind(struct device *dev, + struct device *master, + void *data) +{ + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); + clk_disable_unprepare(dsi->pllref_clk); +} + +static const struct component_ops dw_mipi_dsi_rockchip_ops = { + .bind = dw_mipi_dsi_rockchip_bind, + .unbind = dw_mipi_dsi_rockchip_unbind, +}; + +static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev) +{ + return component_add(&pdev->dev, &dw_mipi_dsi_rockchip_ops); +} + +static int dw_mipi_dsi_rockchip_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &dw_mipi_dsi_rockchip_ops); + + return 0; +} + +struct platform_driver dw_mipi_dsi_rockchip_driver = { + .probe = dw_mipi_dsi_rockchip_probe, + .remove = dw_mipi_dsi_rockchip_remove, + .driver = { + .of_match_table = dw_mipi_dsi_rockchip_dt_ids, + .name = "dw-mipi-dsi-rockchip", + }, +}; diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c index 76d63de..d40cc39 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c @@ -462,7 +462,7 @@ static int __init rockchip_drm_init(void) ADD_ROCKCHIP_SUB_DRIVER(cdn_dp_driver, CONFIG_ROCKCHIP_CDN_DP); ADD_ROCKCHIP_SUB_DRIVER(dw_hdmi_rockchip_pltfm_driver, CONFIG_ROCKCHIP_DW_HDMI); - ADD_ROCKCHIP_SUB_DRIVER(dw_mipi_dsi_driver, + ADD_ROCKCHIP_SUB_DRIVER(dw_mipi_dsi_rockchip_driver, CONFIG_ROCKCHIP_DW_MIPI_DSI); ADD_ROCKCHIP_SUB_DRIVER(inno_hdmi_driver, CONFIG_ROCKCHIP_INNO_HDMI); diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h index 498dfbc..af235b2 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h @@ -66,7 +66,7 @@ void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, extern struct platform_driver cdn_dp_driver; extern struct platform_driver dw_hdmi_rockchip_pltfm_driver; -extern struct platform_driver dw_mipi_dsi_driver; +extern struct platform_driver dw_mipi_dsi_rockchip_driver; extern struct platform_driver inno_hdmi_driver; extern struct platform_driver rockchip_dp_driver; extern struct platform_driver rockchip_lvds_driver;
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare MIPI DSI host controller bridge. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> --- drivers/gpu/drm/rockchip/Kconfig | 2 +- drivers/gpu/drm/rockchip/Makefile | 2 +- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 ----------------------- drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c | 756 +++++++++++++ drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +- drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +- 6 files changed, 760 insertions(+), 1353 deletions(-) delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi_rockchip.c