@@ -20,7 +20,6 @@
#define _DPU_CRTC_H_
#include <linux/kthread.h>
-#include <uapi/drm/dpu_drm.h>
#include <drm/drm_crtc.h>
#include "dpu_kms.h"
#include "dpu_core_perf.h"
@@ -10,7 +10,6 @@
* GNU General Public License for more details.
*/
-#include <uapi/drm/dpu_drm.h>
#include "dpu_kms.h"
#include "dpu_hw_catalog.h"
#include "dpu_hwio.h"
deleted file mode 100644
@@ -1,220 +0,0 @@
-#ifndef _DPU_DRM_H_
-#define _DPU_DRM_H_
-
-#include "drm.h"
-
-/* Total number of supported color planes */
-#define DPU_MAX_PLANES 4
-
-/* Total number of parameterized detail enhancer mapping curves */
-#define DPU_MAX_DE_CURVES 3
-
- /* Y/RGB and UV filter configuration */
-#define FILTER_EDGE_DIRECTED_2D 0x0
-#define FILTER_CIRCULAR_2D 0x1
-#define FILTER_SEPARABLE_1D 0x2
-#define FILTER_BILINEAR 0x3
-
-/* Alpha filters */
-#define FILTER_ALPHA_DROP_REPEAT 0x0
-#define FILTER_ALPHA_BILINEAR 0x1
-#define FILTER_ALPHA_2D 0x3
-
-/* Blend filters */
-#define FILTER_BLEND_CIRCULAR_2D 0x0
-#define FILTER_BLEND_SEPARABLE_1D 0x1
-
-/* LUT configuration flags */
-#define SCALER_LUT_SWAP 0x1
-#define SCALER_LUT_DIR_WR 0x2
-#define SCALER_LUT_Y_CIR_WR 0x4
-#define SCALER_LUT_UV_CIR_WR 0x8
-#define SCALER_LUT_Y_SEP_WR 0x10
-#define SCALER_LUT_UV_SEP_WR 0x20
-
-/**
- * Blend operations for "blend_op" property
- *
- * @DPU_DRM_BLEND_OP_NOT_DEFINED: No blend operation defined for the layer.
- * @DPU_DRM_BLEND_OP_OPAQUE: Apply a constant blend operation. The layer
- * would appear opaque in case fg plane alpha
- * is 0xff.
- * @DPU_DRM_BLEND_OP_PREMULTIPLIED: Apply source over blend rule. Layer already
- * has alpha pre-multiplication done. If the fg
- * plane alpha is less than 0xff, apply
- * modulation as well. This operation is
- * intended on layers having alpha channel.
- * @DPU_DRM_BLEND_OP_COVERAGE: Apply source over blend rule. Layer is not
- * alpha pre-multiplied. Apply
- * pre-multiplication. If fg plane alpha is
- * less than 0xff, apply modulation as well.
- * @DPU_DRM_BLEND_OP_MAX: Used to track maximum blend operation
- * possible by mdp.
- */
-#define DPU_DRM_BLEND_OP_NOT_DEFINED 0
-#define DPU_DRM_BLEND_OP_OPAQUE 1
-#define DPU_DRM_BLEND_OP_PREMULTIPLIED 2
-#define DPU_DRM_BLEND_OP_COVERAGE 3
-#define DPU_DRM_BLEND_OP_MAX 4
-
-/**
- * Bit masks for "src_config" property
- * construct bitmask via (1UL << DPU_DRM_<flag>)
- */
-#define DPU_DRM_DEINTERLACE 0 /* Specifies interlaced input */
-
-/* DRM bitmasks are restricted to 0..63 */
-#define DPU_DRM_BITMASK_COUNT 64
-
-/* Number of dest scalers supported */
-#define DPU_MAX_DS_COUNT 2
-
-/*
- * Destination scaler flag config
- */
-#define DPU_DRM_DESTSCALER_ENABLE 0x1
-#define DPU_DRM_DESTSCALER_SCALE_UPDATE 0x2
-#define DPU_DRM_DESTSCALER_ENHANCER_UPDATE 0x4
-#define DPU_DRM_DESTSCALER_PU_ENABLE 0x8
-
-/**
- * struct dpu_drm_dest_scaler_cfg - destination scaler config structure
- * @flags: Flag to switch between mode for destination scaler
- * refer to destination scaler flag config
- * @index: Destination scaler selection index
- * @lm_width: Layer mixer width configuration
- * @lm_height: Layer mixer height configuration
- * @scaler_cfg: The scaling parameters for all the mode except disable
- * Userspace pointer to struct dpu_drm_scaler_v2
- */
-struct dpu_drm_dest_scaler_cfg {
- uint32_t flags;
- uint32_t index;
- uint32_t lm_width;
- uint32_t lm_height;
- uint64_t scaler_cfg;
-};
-
-/**
- * struct dpu_drm_dest_scaler_data - destination scaler data struct
- * @num_dest_scaler: Number of dest scalers to be configured
- * @ds_cfg: Destination scaler block configuration
- */
-struct dpu_drm_dest_scaler_data {
- uint32_t num_dest_scaler;
- struct dpu_drm_dest_scaler_cfg ds_cfg[DPU_MAX_DS_COUNT];
-};
-
-/*
- * Define constants for struct dpu_drm_csc
- */
-#define DPU_CSC_MATRIX_COEFF_SIZE 9
-#define DPU_CSC_CLAMP_SIZE 6
-#define DPU_CSC_BIAS_SIZE 3
-
-/**
- * struct dpu_drm_csc_v1 - version 1 of struct dpu_drm_csc
- * @ctm_coeff: Matrix coefficients, in S31.32 format
- * @pre_bias: Pre-bias array values
- * @post_bias: Post-bias array values
- * @pre_clamp: Pre-clamp array values
- * @post_clamp: Post-clamp array values
- */
-struct dpu_drm_csc_v1 {
- int64_t ctm_coeff[DPU_CSC_MATRIX_COEFF_SIZE];
- uint32_t pre_bias[DPU_CSC_BIAS_SIZE];
- uint32_t post_bias[DPU_CSC_BIAS_SIZE];
- uint32_t pre_clamp[DPU_CSC_CLAMP_SIZE];
- uint32_t post_clamp[DPU_CSC_CLAMP_SIZE];
-};
-
-/**
- * struct dpu_drm_color - struct to store the color and alpha values
- * @color_0: Color 0 value
- * @color_1: Color 1 value
- * @color_2: Color 2 value
- * @color_3: Color 3 value
- */
-struct dpu_drm_color {
- uint32_t color_0;
- uint32_t color_1;
- uint32_t color_2;
- uint32_t color_3;
-};
-
-/* Total number of supported dim layers */
-#define DPU_MAX_DIM_LAYERS 7
-
-/* DPU_DRM_DIM_LAYER_CONFIG_FLAG - flags for Dim Layer */
-/* Color fill inside of the rect, including border */
-#define DPU_DRM_DIM_LAYER_INCLUSIVE 0x1
-/* Color fill outside of the rect, excluding border */
-#define DPU_DRM_DIM_LAYER_EXCLUSIVE 0x2
-
-/**
- * struct dpu_drm_dim_layer - dim layer cfg struct
- * @flags: Refer DPU_DRM_DIM_LAYER_CONFIG_FLAG for possible values
- * @stage: Blending stage of the dim layer
- * @color_fill: Color fill for dim layer
- * @rect: Dim layer coordinates
- */
-struct dpu_drm_dim_layer_cfg {
- uint32_t flags;
- uint32_t stage;
- struct dpu_drm_color color_fill;
- struct drm_clip_rect rect;
-};
-
-/**
- * struct dpu_drm_dim_layer_v1 - version 1 of dim layer struct
- * @num_layers: Numer of Dim Layers
- * @layer: Dim layer user cfgs ptr for the num_layers
- */
-struct dpu_drm_dim_layer_v1 {
- uint32_t num_layers;
- struct dpu_drm_dim_layer_cfg layer_cfg[DPU_MAX_DIM_LAYERS];
-};
-
-/* Writeback Config version definition */
-#define DPU_DRM_WB_CFG 0x1
-
-/* DPU_DRM_WB_CONFIG_FLAGS - Writeback configuration flags */
-#define DPU_DRM_WB_CFG_FLAGS_CONNECTED (1<<0)
-
-/**
- * struct dpu_drm_wb_cfg - Writeback configuration structure
- * @flags: see DRM_MSM_WB_CONFIG_FLAGS
- * @connector_id: writeback connector identifier
- * @count_modes: Count of modes in modes_ptr
- * @modes: Pointer to struct drm_mode_modeinfo
- */
-struct dpu_drm_wb_cfg {
- uint32_t flags;
- uint32_t connector_id;
- uint32_t count_modes;
- uint64_t modes;
-};
-
-#define DPU_MAX_ROI_V1 4
-
-/**
- * struct dpu_drm_roi_v1 - list of regions of interest for a drm object
- * @num_rects: number of valid rectangles in the roi array
- * @roi: list of roi rectangles
- */
-struct dpu_drm_roi_v1 {
- uint32_t num_rects;
- struct drm_clip_rect roi[DPU_MAX_ROI_V1];
-};
-
-/**
- * Define extended power modes supported by the DPU connectors.
- */
-#define DPU_MODE_DPMS_ON 0
-#define DPU_MODE_DPMS_LP1 1
-#define DPU_MODE_DPMS_LP2 2
-#define DPU_MODE_DPMS_STANDBY 3
-#define DPU_MODE_DPMS_SUSPEND 4
-#define DPU_MODE_DPMS_OFF 5
-
-#endif /* _DPU_DRM_H_ */
deleted file mode 100644
@@ -1,345 +0,0 @@
-#ifndef _MSM_DRM_PP_H_
-#define _MSM_DRM_PP_H_
-
-#include <linux/types.h>
-/**
- * struct drm_msm_pcc_coeff - PCC coefficient structure for each color
- * component.
- * @c: constant coefficient.
- * @r: red coefficient.
- * @g: green coefficient.
- * @b: blue coefficient.
- * @rg: red green coefficient.
- * @gb: green blue coefficient.
- * @rb: red blue coefficient.
- * @rgb: red blue green coefficient.
- */
-
-struct drm_msm_pcc_coeff {
- __u32 c;
- __u32 r;
- __u32 g;
- __u32 b;
- __u32 rg;
- __u32 gb;
- __u32 rb;
- __u32 rgb;
-};
-
-/**
- * struct drm_msm_pcc - pcc feature structure
- * @flags: for customizing operations
- * @r: red coefficients.
- * @g: green coefficients.
- * @b: blue coefficients.
- * @r_rr: second order coefficients
- * @r_gg: second order coefficients
- * @r_bb: second order coefficients
- * @g_rr: second order coefficients
- * @g_gg: second order coefficients
- * @g_bb: second order coefficients
- * @b_rr: second order coefficients
- * @b_gg: second order coefficients
- * @b_bb: second order coefficients
- */
-#define DRM_MSM_PCC3
-struct drm_msm_pcc {
- __u64 flags;
- struct drm_msm_pcc_coeff r;
- struct drm_msm_pcc_coeff g;
- struct drm_msm_pcc_coeff b;
- __u32 r_rr;
- __u32 r_gg;
- __u32 r_bb;
- __u32 g_rr;
- __u32 g_gg;
- __u32 g_bb;
- __u32 b_rr;
- __u32 b_gg;
- __u32 b_bb;
-};
-
-/* struct drm_msm_pa_vlut - picture adjustment vLUT structure
- * flags: for customizing vlut operation
- * val: vLUT values
- */
-#define PA_VLUT_SIZE 256
-struct drm_msm_pa_vlut {
- __u64 flags;
- __u32 val[PA_VLUT_SIZE];
-};
-
-/* struct drm_msm_memcol - Memory color feature structure.
- * Skin, sky, foliage features are supported.
- * @prot_flags: Bit mask for enabling protection feature.
- * @color_adjust_p0: Adjustment curve.
- * @color_adjust_p1: Adjustment curve.
- * @color_adjust_p2: Adjustment curve.
- * @blend_gain: Blend gain weightage from othe PA features.
- * @sat_hold: Saturation hold value.
- * @val_hold: Value hold info.
- * @hue_region: Hue qualifier.
- * @sat_region: Saturation qualifier.
- * @val_region: Value qualifier.
- */
-#define DRM_MSM_MEMCOL
-struct drm_msm_memcol {
- __u64 prot_flags;
- __u32 color_adjust_p0;
- __u32 color_adjust_p1;
- __u32 color_adjust_p2;
- __u32 blend_gain;
- __u32 sat_hold;
- __u32 val_hold;
- __u32 hue_region;
- __u32 sat_region;
- __u32 val_region;
-};
-
-#define GAMUT_3D_MODE_17 1
-#define GAMUT_3D_MODE_5 2
-#define GAMUT_3D_MODE_13 3
-
-#define GAMUT_3D_MODE17_TBL_SZ 1229
-#define GAMUT_3D_MODE5_TBL_SZ 32
-#define GAMUT_3D_MODE13_TBL_SZ 550
-#define GAMUT_3D_SCALE_OFF_SZ 16
-#define GAMUT_3D_SCALEB_OFF_SZ 12
-#define GAMUT_3D_TBL_NUM 4
-#define GAMUT_3D_SCALE_OFF_TBL_NUM 3
-#define GAMUT_3D_MAP_EN (1 << 0)
-
-/**
- * struct drm_msm_3d_col - 3d gamut color component structure
- * @c0: Holds c0 value
- * @c2_c1: Holds c2/c1 values
- */
-struct drm_msm_3d_col {
- __u32 c2_c1;
- __u32 c0;
-};
-/**
- * struct drm_msm_3d_gamut - 3d gamut feature structure
- * @flags: flags for the feature values are:
- * 0 - no map
- * GAMUT_3D_MAP_EN - enable map
- * @mode: lut mode can take following values:
- * - GAMUT_3D_MODE_17
- * - GAMUT_3D_MODE_5
- * - GAMUT_3D_MODE_13
- * @scale_off: Scale offset table
- * @col: Color component tables
- */
-struct drm_msm_3d_gamut {
- __u64 flags;
- __u32 mode;
- __u32 scale_off[GAMUT_3D_SCALE_OFF_TBL_NUM][GAMUT_3D_SCALE_OFF_SZ];
- struct drm_msm_3d_col col[GAMUT_3D_TBL_NUM][GAMUT_3D_MODE17_TBL_SZ];
-};
-
-#define PGC_TBL_LEN 512
-#define PGC_8B_ROUND (1 << 0)
-/**
- * struct drm_msm_pgc_lut - pgc lut feature structure
- * @flags: flags for the featue values can be:
- * - PGC_8B_ROUND
- * @c0: color0 component lut
- * @c1: color1 component lut
- * @c2: color2 component lut
- */
-struct drm_msm_pgc_lut {
- __u64 flags;
- __u32 c0[PGC_TBL_LEN];
- __u32 c1[PGC_TBL_LEN];
- __u32 c2[PGC_TBL_LEN];
-};
-
-#define IGC_TBL_LEN 256
-#define IGC_DITHER_ENABLE (1 << 0)
-/**
- * struct drm_msm_igc_lut - igc lut feature structure
- * @flags: flags for the feature customization, values can be:
- * - IGC_DITHER_ENABLE: Enable dither functionality
- * @c0: color0 component lut
- * @c1: color1 component lut
- * @c2: color2 component lut
- * @strength: dither strength, considered valid when IGC_DITHER_ENABLE
- * is set in flags. Strength value based on source bit width.
- */
-struct drm_msm_igc_lut {
- __u64 flags;
- __u32 c0[IGC_TBL_LEN];
- __u32 c1[IGC_TBL_LEN];
- __u32 c2[IGC_TBL_LEN];
- __u32 strength;
-};
-
-#define AD4_LUT_GRP0_SIZE 33
-#define AD4_LUT_GRP1_SIZE 32
-/*
- * struct drm_msm_ad4_init - ad4 init structure set by user-space client.
- * Init param values can change based on tuning
- * hence it is passed by user-space clients.
- */
-struct drm_msm_ad4_init {
- __u32 init_param_001[AD4_LUT_GRP0_SIZE];
- __u32 init_param_002[AD4_LUT_GRP0_SIZE];
- __u32 init_param_003[AD4_LUT_GRP0_SIZE];
- __u32 init_param_004[AD4_LUT_GRP0_SIZE];
- __u32 init_param_005[AD4_LUT_GRP1_SIZE];
- __u32 init_param_006[AD4_LUT_GRP1_SIZE];
- __u32 init_param_007[AD4_LUT_GRP0_SIZE];
- __u32 init_param_008[AD4_LUT_GRP0_SIZE];
- __u32 init_param_009;
- __u32 init_param_010;
- __u32 init_param_011;
- __u32 init_param_012;
- __u32 init_param_013;
- __u32 init_param_014;
- __u32 init_param_015;
- __u32 init_param_016;
- __u32 init_param_017;
- __u32 init_param_018;
- __u32 init_param_019;
- __u32 init_param_020;
- __u32 init_param_021;
- __u32 init_param_022;
- __u32 init_param_023;
- __u32 init_param_024;
- __u32 init_param_025;
- __u32 init_param_026;
- __u32 init_param_027;
- __u32 init_param_028;
- __u32 init_param_029;
- __u32 init_param_030;
- __u32 init_param_031;
- __u32 init_param_032;
- __u32 init_param_033;
- __u32 init_param_034;
- __u32 init_param_035;
- __u32 init_param_036;
- __u32 init_param_037;
- __u32 init_param_038;
- __u32 init_param_039;
- __u32 init_param_040;
- __u32 init_param_041;
- __u32 init_param_042;
- __u32 init_param_043;
- __u32 init_param_044;
- __u32 init_param_045;
- __u32 init_param_046;
- __u32 init_param_047;
- __u32 init_param_048;
- __u32 init_param_049;
- __u32 init_param_050;
- __u32 init_param_051;
- __u32 init_param_052;
- __u32 init_param_053;
- __u32 init_param_054;
- __u32 init_param_055;
- __u32 init_param_056;
- __u32 init_param_057;
- __u32 init_param_058;
- __u32 init_param_059;
- __u32 init_param_060;
- __u32 init_param_061;
- __u32 init_param_062;
- __u32 init_param_063;
- __u32 init_param_064;
- __u32 init_param_065;
- __u32 init_param_066;
- __u32 init_param_067;
- __u32 init_param_068;
- __u32 init_param_069;
- __u32 init_param_070;
- __u32 init_param_071;
- __u32 init_param_072;
- __u32 init_param_073;
- __u32 init_param_074;
- __u32 init_param_075;
-};
-
-/*
- * struct drm_msm_ad4_cfg - ad4 config structure set by user-space client.
- * Config param values can vary based on tuning,
- * hence it is passed by user-space clients.
- */
-struct drm_msm_ad4_cfg {
- __u32 cfg_param_001;
- __u32 cfg_param_002;
- __u32 cfg_param_003;
- __u32 cfg_param_004;
- __u32 cfg_param_005;
- __u32 cfg_param_006;
- __u32 cfg_param_007;
- __u32 cfg_param_008;
- __u32 cfg_param_009;
- __u32 cfg_param_010;
- __u32 cfg_param_011;
- __u32 cfg_param_012;
- __u32 cfg_param_013;
- __u32 cfg_param_014;
- __u32 cfg_param_015;
- __u32 cfg_param_016;
- __u32 cfg_param_017;
- __u32 cfg_param_018;
- __u32 cfg_param_019;
- __u32 cfg_param_020;
- __u32 cfg_param_021;
- __u32 cfg_param_022;
- __u32 cfg_param_023;
- __u32 cfg_param_024;
- __u32 cfg_param_025;
- __u32 cfg_param_026;
- __u32 cfg_param_027;
- __u32 cfg_param_028;
- __u32 cfg_param_029;
- __u32 cfg_param_030;
- __u32 cfg_param_031;
- __u32 cfg_param_032;
- __u32 cfg_param_033;
- __u32 cfg_param_034;
- __u32 cfg_param_035;
- __u32 cfg_param_036;
- __u32 cfg_param_037;
- __u32 cfg_param_038;
- __u32 cfg_param_039;
- __u32 cfg_param_040;
- __u32 cfg_param_041;
- __u32 cfg_param_042;
- __u32 cfg_param_043;
- __u32 cfg_param_044;
- __u32 cfg_param_045;
- __u32 cfg_param_046;
- __u32 cfg_param_047;
- __u32 cfg_param_048;
- __u32 cfg_param_049;
- __u32 cfg_param_050;
- __u32 cfg_param_051;
- __u32 cfg_param_052;
- __u32 cfg_param_053;
-};
-
-#define DITHER_MATRIX_SZ 16
-
-/**
- * struct drm_msm_dither - dither feature structure
- * @flags: for customizing operations
- * @temporal_en: temperal dither enable
- * @c0_bitdepth: c0 component bit depth
- * @c1_bitdepth: c1 component bit depth
- * @c2_bitdepth: c2 component bit depth
- * @c3_bitdepth: c2 component bit depth
- * @matrix: dither strength matrix
- */
-struct drm_msm_dither {
- __u64 flags;
- __u32 temporal_en;
- __u32 c0_bitdepth;
- __u32 c1_bitdepth;
- __u32 c2_bitdepth;
- __u32 c3_bitdepth;
- __u32 matrix[DITHER_MATRIX_SZ];
-};
-
-#endif /* _MSM_DRM_PP_H_ */
remove unwanted dpu uapi headers exposing custom payload layouts for custom properties changs in v2: - none changes in v3: - rebased on https://gitlab.freedesktop.org/seanpaul/ dpu-staging/commit/481d29d31cd629fd216381b53de5695f645465d5 Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 1 - drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c | 1 - include/uapi/drm/dpu_drm.h | 220 ------------------- include/uapi/drm/msm_drm_pp.h | 345 ------------------------------ 4 files changed, 567 deletions(-) delete mode 100644 include/uapi/drm/dpu_drm.h delete mode 100644 include/uapi/drm/msm_drm_pp.h