diff mbox series

[v1,1/5] dt-bindings: display: stm32: add supply property to DSI controller

Message ID 1554279389-27377-2-git-send-email-yannick.fertre@st.com (mailing list archive)
State New, archived
Headers show
Series Add supply property for DSI controller | expand

Commit Message

Yannick FERTRE April 3, 2019, 8:16 a.m. UTC
This patch adds documentation of a new property phy-dsi-supply to the
STM32 DSI controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Philippe CORNU April 5, 2019, 4:33 p.m. UTC | #1
On 4/3/19 10:16 AM, Yannick Fertré wrote:
> This patch adds documentation of a new property phy-dsi-supply to the
> STM32 DSI controller.
> 
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
>   Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> index 3eb1b48..60c54da 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> @@ -40,6 +40,8 @@ Mandatory nodes specific to STM32 DSI:
>   - panel or bridge node: A node containing the panel or bridge description as
>     documented in [6].
>     - port: panel or bridge port node, connected to the DSI output port (port@1).
> +Optional properties:
> +- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
>   
>   Note: You can find more documentation in the following references
>   [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -101,6 +103,7 @@ Example 2: DSI panel
>   			clock-names = "pclk", "ref";
>   			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
>   			reset-names = "apb";
> +			phy-dsi-supply = <&reg18>;

Dear Yannick,
Thank you for your patch,

Reviewed-by: Philippe Cornu <philippe.cornu@st.com>

Philippe :)


>   
>   			ports {
>   				#address-cells = <1>;
>
Rob Herring (Arm) April 6, 2019, 6:06 a.m. UTC | #2
On Wed, 3 Apr 2019 10:16:25 +0200, =?UTF-8?q?Yannick=20Fertr=C3=A9?= wrote:
> This patch adds documentation of a new property phy-dsi-supply to the
> STM32 DSI controller.
> 
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 3eb1b48..60c54da 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -40,6 +40,8 @@  Mandatory nodes specific to STM32 DSI:
 - panel or bridge node: A node containing the panel or bridge description as
   documented in [6].
   - port: panel or bridge port node, connected to the DSI output port (port@1).
+Optional properties:
+- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
 
 Note: You can find more documentation in the following references
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -101,6 +103,7 @@  Example 2: DSI panel
 			clock-names = "pclk", "ref";
 			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
 			reset-names = "apb";
+			phy-dsi-supply = <&reg18>;
 
 			ports {
 				#address-cells = <1>;