| Message ID | 1554993271-29523-4-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add RZ/G2M DU support | expand |
Hi Biju, On 11/04/2019 15:34, Biju Das wrote: > Add support for the R8A774A1 DU (which is very similar to the R8A7796 DU); > it has one RGB output, one LVDS output and one HDMI output. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> I see Figure 35.1b across the two datasheets does show some differences between these two parts, but the layout defined by the rcar_du_r8a7796_info structure is compatible based on the current state of the driver... However, if support for the TCON/CMM is added to the DU driver - then I think this will need to be separated. I have seen patches this month which are trying to upstream a CMM implementation. With that in mind - perhaps it would be worth creating a new structure for this part? Otherwise the CMM would end up being enabled when it doesn't exist and could cause problems. -- Regards Kieran > --- > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > index 75ab17a..f7a5314 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > @@ -386,6 +386,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info }, > { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, > { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info }, > + { .compatible = "renesas,du-r8a774a1", .data = &rcar_du_r8a7796_info }, > { .compatible = "renesas,du-r8a774c0", .data = &rcar_du_r8a774c0_info }, > { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info }, > { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info }, >
Hi Kieran, Thanks for the feedback. > Subject: Re: [PATCH 3/4] drm: rcar-du: Add R8A774A1 support > > Hi Biju, > > On 11/04/2019 15:34, Biju Das wrote: > > Add support for the R8A774A1 DU (which is very similar to the R8A7796 > > DU); it has one RGB output, one LVDS output and one HDMI output. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > I see Figure 35.1b across the two datasheets does show some differences > between these two parts, but the layout defined by the > rcar_du_r8a7796_info structure is compatible based on the current state of > the driver... > > However, if support for the TCON/CMM is added to the DU driver - then I > think this will need to be separated. OK. I will send V2 with separate data structure " rcar_du_r8a774a1_info" for RZ/G2M. Regards, Biju > I have seen patches this month which are trying to upstream a CMM > implementation. > > With that in mind - perhaps it would be worth creating a new structure for > this part? > > Otherwise the CMM would end up being enabled when it doesn't exist and > could cause problems. > > --- > > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > > index 75ab17a..f7a5314 100644 > > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > > @@ -386,6 +386,7 @@ static const struct of_device_id rcar_du_of_table[] > = { > > { .compatible = "renesas,du-r8a7744", .data = > &rzg1_du_r8a7743_info }, > > { .compatible = "renesas,du-r8a7745", .data = > &rzg1_du_r8a7745_info }, > > { .compatible = "renesas,du-r8a77470", .data = > > &rzg1_du_r8a77470_info }, > > + { .compatible = "renesas,du-r8a774a1", .data = > &rcar_du_r8a7796_info > > +}, > > { .compatible = "renesas,du-r8a774c0", .data = > &rcar_du_r8a774c0_info }, > > { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info > }, > > { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info > > }, > >
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 75ab17a..f7a5314 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c @@ -386,6 +386,7 @@ static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info }, { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, { .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info }, + { .compatible = "renesas,du-r8a774a1", .data = &rcar_du_r8a7796_info }, { .compatible = "renesas,du-r8a774c0", .data = &rcar_du_r8a774c0_info }, { .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info }, { .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
Add support for the R8A774A1 DU (which is very similar to the R8A7796 DU); it has one RGB output, one LVDS output and one HDMI output. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 1 + 1 file changed, 1 insertion(+)