diff mbox series

[2/4] dt-bindings: display: bridge: Repurpose lvds-encoder

Message ID 1572443014-17335-3-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series Add LCD panel support to iwg20d | expand

Commit Message

Fabrizio Castro Oct. 30, 2019, 1:43 p.m. UTC 
In an effort to repurpose lvds-encoder.c to also serve the
function of LVDS decoders, we ended up defining a new "generic"
compatible string, therefore adapt the dt-bindings to fit the
new purpose.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 .../bindings/display/bridge/lvds-codec.txt         | 100 +++++++++++++++++++++
 .../bindings/display/bridge/lvds-transmitter.txt   |  66 --------------
 2 files changed, 100 insertions(+), 66 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt

Comments

Neil Armstrong Nov. 4, 2019, 9:17 a.m. UTC | #1 
Hi,


On 30/10/2019 14:43, Fabrizio Castro wrote:
> In an effort to repurpose lvds-encoder.c to also serve the
> function of LVDS decoders, we ended up defining a new "generic"
> compatible string, therefore adapt the dt-bindings to fit the
> new purpose.

You should convert it to dt-schemas in this case.

Neil

> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  .../bindings/display/bridge/lvds-codec.txt         | 100 +++++++++++++++++++++
>  .../bindings/display/bridge/lvds-transmitter.txt   |  66 --------------
>  2 files changed, 100 insertions(+), 66 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> new file mode 100644
> index 0000000..45fd81c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> @@ -0,0 +1,100 @@
> +Trasnparent LVDS encoders and LVDS decoders
> +-------------------------------------------
> +
> +This binding supports transparent LVDS encoders and LVDS decoders that don't
> +require any configuration.
> +
> +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> +incompatible data link layers have been used over time to transmit image data
> +to LVDS panels. This binding targets devices compatible with the following
> +specifications only.
> +
> +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> +Semiconductor
> +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> +Electronics Standards Association (VESA)
> +
> +Those devices have been marketed under the FPD-Link and FlatLink brand names
> +among others.
> +
> +
> +Required properties:
> +
> +- compatible: Must be "lvds-encoder" for LVDS encoders or "lvds-decoder" for
> +              LVDS decoders.
> +
> +  Any encoder compatible with this generic binding, but with additional
> +  properties not listed here, must list a device specific compatible first
> +  followed by the generic compatible.
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modeled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +For LVDS encoders:
> +- Video port 0 for parallel input
> +- Video port 1 for LVDS output
> +
> +For LVDS decoders:
> +- Video port 0 for LVDS input
> +- Video port 1 for parallel output
> +
> +
> +LVDS encoder example
> +--------------------
> +
> +lvds-encoder {
> +	compatible = "lvds-encoder";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +
> +			lvds_enc_in: endpoint {
> +				remote-endpoint = <&display_out_rgb>;
> +			};
> +		};
> +
> +		port@1 {
> +			reg = <1>;
> +
> +			lvds_enc_out: endpoint {
> +				remote-endpoint = <&lvds_panel_in>;
> +			};
> +		};
> +	};
> +};
> +
> +LVDS decoder example
> +--------------------
> +
> +lvds-decoder {
> +	compatible = "lvds-decoder";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +
> +			lvds_dec_in: endpoint {
> +				remote-endpoint = <&display_out_lvds>;
> +			};
> +		};
> +
> +		port@1 {
> +			reg = <1>;
> +
> +			lvds_dec_out: endpoint {
> +				remote-endpoint = <&rgb_panel_in>;
> +			};
> +		};
> +	};
> +};
> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> deleted file mode 100644
> index 60091db..0000000
> --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -Parallel to LVDS Encoder
> -------------------------
> -
> -This binding supports the parallel to LVDS encoders that don't require any
> -configuration.
> -
> -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> -incompatible data link layers have been used over time to transmit image data
> -to LVDS panels. This binding targets devices compatible with the following
> -specifications only.
> -
> -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> -Semiconductor
> -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> -Electronics Standards Association (VESA)
> -
> -Those devices have been marketed under the FPD-Link and FlatLink brand names
> -among others.
> -
> -
> -Required properties:
> -
> -- compatible: Must be "lvds-encoder"
> -
> -  Any encoder compatible with this generic binding, but with additional
> -  properties not listed here, must list a device specific compatible first
> -  followed by this generic compatible.
> -
> -Required nodes:
> -
> -This device has two video ports. Their connections are modeled using the OF
> -graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> -
> -- Video port 0 for parallel input
> -- Video port 1 for LVDS output
> -
> -
> -Example
> --------
> -
> -lvds-encoder {
> -	compatible = "lvds-encoder";
> -
> -	ports {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		port@0 {
> -			reg = <0>;
> -
> -			lvds_enc_in: endpoint {
> -				remote-endpoint = <&display_out_rgb>;
> -			};
> -		};
> -
> -		port@1 {
> -			reg = <1>;
> -
> -			lvds_enc_out: endpoint {
> -				remote-endpoint = <&lvds_panel_in>;
> -			};
> -		};
> -	};
> -};
>
Fabrizio Castro Nov. 4, 2019, 10:37 a.m. UTC | #2 
Hi Neil,

Thank you for your feedback!

> From: Neil Armstrong <narmstrong@baylibre.com>
> Sent: 04 November 2019 09:17
> Subject: Re: [PATCH 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
> 
> Hi,
> 
> 
> On 30/10/2019 14:43, Fabrizio Castro wrote:
> > In an effort to repurpose lvds-encoder.c to also serve the
> > function of LVDS decoders, we ended up defining a new "generic"
> > compatible string, therefore adapt the dt-bindings to fit the
> > new purpose.
> 
> You should convert it to dt-schemas in this case.

Will do.

Thanks,
Fab

> 
> Neil
> 
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  .../bindings/display/bridge/lvds-codec.txt         | 100 +++++++++++++++++++++
> >  .../bindings/display/bridge/lvds-transmitter.txt   |  66 --------------
> >  2 files changed, 100 insertions(+), 66 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> >  delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> > new file mode 100644
> > index 0000000..45fd81c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
> > @@ -0,0 +1,100 @@
> > +Trasnparent LVDS encoders and LVDS decoders
> > +-------------------------------------------
> > +
> > +This binding supports transparent LVDS encoders and LVDS decoders that don't
> > +require any configuration.
> > +
> > +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> > +incompatible data link layers have been used over time to transmit image data
> > +to LVDS panels. This binding targets devices compatible with the following
> > +specifications only.
> > +
> > +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> > +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> > +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> > +Semiconductor
> > +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> > +Electronics Standards Association (VESA)
> > +
> > +Those devices have been marketed under the FPD-Link and FlatLink brand names
> > +among others.
> > +
> > +
> > +Required properties:
> > +
> > +- compatible: Must be "lvds-encoder" for LVDS encoders or "lvds-decoder" for
> > +              LVDS decoders.
> > +
> > +  Any encoder compatible with this generic binding, but with additional
> > +  properties not listed here, must list a device specific compatible first
> > +  followed by the generic compatible.
> > +
> > +Required nodes:
> > +
> > +This device has two video ports. Their connections are modeled using the OF
> > +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > +
> > +For LVDS encoders:
> > +- Video port 0 for parallel input
> > +- Video port 1 for LVDS output
> > +
> > +For LVDS decoders:
> > +- Video port 0 for LVDS input
> > +- Video port 1 for parallel output
> > +
> > +
> > +LVDS encoder example
> > +--------------------
> > +
> > +lvds-encoder {
> > +	compatible = "lvds-encoder";
> > +
> > +	ports {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		port@0 {
> > +			reg = <0>;
> > +
> > +			lvds_enc_in: endpoint {
> > +				remote-endpoint = <&display_out_rgb>;
> > +			};
> > +		};
> > +
> > +		port@1 {
> > +			reg = <1>;
> > +
> > +			lvds_enc_out: endpoint {
> > +				remote-endpoint = <&lvds_panel_in>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +LVDS decoder example
> > +--------------------
> > +
> > +lvds-decoder {
> > +	compatible = "lvds-decoder";
> > +
> > +	ports {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		port@0 {
> > +			reg = <0>;
> > +
> > +			lvds_dec_in: endpoint {
> > +				remote-endpoint = <&display_out_lvds>;
> > +			};
> > +		};
> > +
> > +		port@1 {
> > +			reg = <1>;
> > +
> > +			lvds_dec_out: endpoint {
> > +				remote-endpoint = <&rgb_panel_in>;
> > +			};
> > +		};
> > +	};
> > +};
> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> > deleted file mode 100644
> > index 60091db..0000000
> > --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> > +++ /dev/null
> > @@ -1,66 +0,0 @@
> > -Parallel to LVDS Encoder
> > -------------------------
> > -
> > -This binding supports the parallel to LVDS encoders that don't require any
> > -configuration.
> > -
> > -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
> > -incompatible data link layers have been used over time to transmit image data
> > -to LVDS panels. This binding targets devices compatible with the following
> > -specifications only.
> > -
> > -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
> > -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
> > -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
> > -Semiconductor
> > -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
> > -Electronics Standards Association (VESA)
> > -
> > -Those devices have been marketed under the FPD-Link and FlatLink brand names
> > -among others.
> > -
> > -
> > -Required properties:
> > -
> > -- compatible: Must be "lvds-encoder"
> > -
> > -  Any encoder compatible with this generic binding, but with additional
> > -  properties not listed here, must list a device specific compatible first
> > -  followed by this generic compatible.
> > -
> > -Required nodes:
> > -
> > -This device has two video ports. Their connections are modeled using the OF
> > -graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > -
> > -- Video port 0 for parallel input
> > -- Video port 1 for LVDS output
> > -
> > -
> > -Example
> > --------
> > -
> > -lvds-encoder {
> > -	compatible = "lvds-encoder";
> > -
> > -	ports {
> > -		#address-cells = <1>;
> > -		#size-cells = <0>;
> > -
> > -		port@0 {
> > -			reg = <0>;
> > -
> > -			lvds_enc_in: endpoint {
> > -				remote-endpoint = <&display_out_rgb>;
> > -			};
> > -		};
> > -
> > -		port@1 {
> > -			reg = <1>;
> > -
> > -			lvds_enc_out: endpoint {
> > -				remote-endpoint = <&lvds_panel_in>;
> > -			};
> > -		};
> > -	};
> > -};
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
new file mode 100644
index 0000000..45fd81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt
@@ -0,0 +1,100 @@ 
+Trasnparent LVDS encoders and LVDS decoders
+-------------------------------------------
+
+This binding supports transparent LVDS encoders and LVDS decoders that don't
+require any configuration.
+
+LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+incompatible data link layers have been used over time to transmit image data
+to LVDS panels. This binding targets devices compatible with the following
+specifications only.
+
+[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+Semiconductor
+[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+Electronics Standards Association (VESA)
+
+Those devices have been marketed under the FPD-Link and FlatLink brand names
+among others.
+
+
+Required properties:
+
+- compatible: Must be "lvds-encoder" for LVDS encoders or "lvds-decoder" for
+              LVDS decoders.
+
+  Any encoder compatible with this generic binding, but with additional
+  properties not listed here, must list a device specific compatible first
+  followed by the generic compatible.
+
+Required nodes:
+
+This device has two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+For LVDS encoders:
+- Video port 0 for parallel input
+- Video port 1 for LVDS output
+
+For LVDS decoders:
+- Video port 0 for LVDS input
+- Video port 1 for parallel output
+
+
+LVDS encoder example
+--------------------
+
+lvds-encoder {
+	compatible = "lvds-encoder";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lvds_enc_in: endpoint {
+				remote-endpoint = <&display_out_rgb>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds_enc_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
+LVDS decoder example
+--------------------
+
+lvds-decoder {
+	compatible = "lvds-decoder";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lvds_dec_in: endpoint {
+				remote-endpoint = <&display_out_lvds>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds_dec_out: endpoint {
+				remote-endpoint = <&rgb_panel_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
deleted file mode 100644
index 60091db..0000000
--- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
+++ /dev/null
@@ -1,66 +0,0 @@ 
-Parallel to LVDS Encoder
-------------------------
-
-This binding supports the parallel to LVDS encoders that don't require any
-configuration.
-
-LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-incompatible data link layers have been used over time to transmit image data
-to LVDS panels. This binding targets devices compatible with the following
-specifications only.
-
-[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-Semiconductor
-[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-Electronics Standards Association (VESA)
-
-Those devices have been marketed under the FPD-Link and FlatLink brand names
-among others.
-
-
-Required properties:
-
-- compatible: Must be "lvds-encoder"
-
-  Any encoder compatible with this generic binding, but with additional
-  properties not listed here, must list a device specific compatible first
-  followed by this generic compatible.
-
-Required nodes:
-
-This device has two video ports. Their connections are modeled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for parallel input
-- Video port 1 for LVDS output
-
-
-Example
--------
-
-lvds-encoder {
-	compatible = "lvds-encoder";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds_enc_in: endpoint {
-				remote-endpoint = <&display_out_rgb>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds_enc_out: endpoint {
-				remote-endpoint = <&lvds_panel_in>;
-			};
-		};
-	};
-};