| Message ID | 1580117390-6057-1-git-send-email-smasetty@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] arm64: dts: qcom: sc7180: Add A618 gpu dt blob | expand |
Hi, On Mon, Jan 27, 2020 at 1:30 AM Sharat Masetty <smasetty@codeaurora.org> wrote: > > This patch adds the required dt nodes and properties > to enabled A618 GPU. > > Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 103 +++++++++++++++++++++++++++++++++++ > 1 file changed, 103 insertions(+) Note that +Matthias Kaehlcke commented on v1 your patch: https://lore.kernel.org/r/20191204220033.GH228856@google.com/ ...so he should have been CCed on v2. I would also note that some of the comments below are echos of what Matthias already said in the previous version but just weren't addressed. > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index b859431..277d84d 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -7,6 +7,7 @@ > > #include <dt-bindings/clock/qcom,gcc-sc7180.h> > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> Header files should be sorted alphabetically. ...or, even better, base your patch atop mine: https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid/ ...which adds the gpucc header file so you don't have to. ...and when you do so, email out a Reviewed-by and/or Tested-by for my patch. ;-) > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/interconnect/qcom,sc7180.h> > #include <dt-bindings/phy/phy-qcom-qusb2.h> > @@ -1619,6 +1620,108 @@ > #interconnect-cells = <1>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > + > + gpu: gpu@5000000 { > + compatible = "qcom,adreno-618.0", "qcom,adreno"; Though it's not controversial, please send a patch to: Documentation/devicetree/bindings/display/msm/gmu.txt ...to add 'qcom,adreno-618.0', like: for example: "qcom,adreno-gmu-618.0", "qcom,adreno-gmu" "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" Probably as part of this you will be asked to convert this file to yaml. IMO we don't need to block landing this patch on the effort to convert it to yaml, but you should still work on it. ...or maybe Jordan wants to work on it? > + #stream-id-cells = <16>; > + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, > + <0 0x05061000 0 0x800>; > + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&adreno_smmu 0>; > + operating-points-v2 = <&gpu_opp_table>; > + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; Running: $ git fetch git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git for-next $ git grep gem_noc FETCH_HEAD $ git fetch git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git arm64-for-5.7-to-be-rebased $ git grep gem_noc FETCH_HEAD ...shows no hits. That's because the interconnect patches haven't landed in the tree that you're targeting. In the very least you should mention somewhere in your email that your patch depends on the interconnect patches landing, perhaps pointing at: https://lore.kernel.org/r/1577782737-32068-4-git-send-email-okukatla@codeaurora.org ...but even better would be to split your patch into two parts. The first patch would be exactly like your patch except without the "interconnects" line. The 2nd patch would add the interconnects line. This would allow Bjorn/Andy to land the first patch now and then land the second patch when the interconnect series is ready. I can confirm that you can still get basic GPU functionality even without the interconnects bit so it would be worth landing earlier. I will also note that by basing on a tree that has private patches to the same file you're touching you make it very hard for a maintainer to apply. When I try this: $ curl https://patchwork.kernel.org/patch/11352261/mbox/ | git am -3 I get: error: sha1 information is lacking or useless (arch/arm64/boot/dts/qcom/sc7180.dtsi). error: could not build fake ancestor Patch failed at 0001 arm64: dts: qcom: sc7180: Add A618 gpu dt blob ...yes, I can apply it with 'git am --show-current-patch | patch -p1' but it's ugly (and it ends up making things sort in the wrong order). > + adreno_smmu: iommu@5040000 { > + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; Please send a patch to: Documentation/devicetree/bindings/iommu/arm,smmu.yaml ...adding 'qcom,sc7180-smmu-v2'. If you do this it will point out that you've added a new clock: "mem_iface_clk". Is this truly a new clock in sc7180 compared to previous IOMMUs? ...or is it not really needed? > + reg = <0 0x05040000 0 0x10000>; > + #iommu-cells = <1>; > + #global-interrupts = <2>; > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; > + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, > + <&gcc GCC_GPU_CFG_AHB_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>; > + > + clock-names = "bus", "iface", "mem_iface_clk"; nit: keep clocks and clock-names next to each other (no blank line). If you really feel like it needs more space add it between the clock-names and power-domains. > + power-domains = <&gpucc CX_GDSC>; Similar to interconnects, gpucc hasn't landed yet. Somewhere you should point out this fact and ideally point to: https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid/ ...unlike interconnects, your patch can't land without gpucc, so you should point this out as a hard dependency. > + }; > + > + gmu: gmu@506a000 { > + compatible="qcom,adreno-gmu-618", "qcom,adreno-gmu"; As per the bindings, "qcom,adreno-gmu-618" should be "qcom,adreno-gmu-618.0", right? ...and I bet you'd never have guessed that I'll request that you add "qcom,adreno-gmu-618" to: Documentation/devicetree/bindings/display/msm/gmu.txt ...and that you'll probably be asked to convert to yaml. Again, maybe Jordan wants to attempt this? > + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, > + <0 0x0b490000 0 0x10000>; > + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hfi", "gmu"; > + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > + <&gpucc GPU_CC_CXO_CLK>, > + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > + clock-names = "gmu", "cxo", "axi", "memnoc"; > + power-domains = <&gpucc CX_GDSC>; Bindings claim that you need both CX and GC. Is sc7180 somehow different? Bindings also claim that you should be providing power-domain-names. > + iommus = <&adreno_smmu 5>; > + operating-points-v2 = <&gmu_opp_table>; > + > + gmu_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + }; > + }; > + }; > }; > > thermal-zones { Using the "thermal-zones" as context, it looks as if you're asserting that your new nodes belong at the very end of the pile of nodes with addresses. This is not true. Looking at the branch 'arm64-for-5.7-to-be-rebased' on the Qualcomm tree, I see: cpufreq_hw: cpufreq@18323000 ...which has a larger address than your 0x0506a000. Please sort your nodes numerically. -Doug
On Mon, Jan 27, 2020 at 02:29:53PM -0800, Doug Anderson wrote: > Hi, > > On Mon, Jan 27, 2020 at 1:30 AM Sharat Masetty <smasetty@codeaurora.org> wrote: > > > > This patch adds the required dt nodes and properties > > to enabled A618 GPU. > > > > Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> > > --- > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 103 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 103 insertions(+) > > Note that +Matthias Kaehlcke commented on v1 your patch: > > https://lore.kernel.org/r/20191204220033.GH228856@google.com/ > > ...so he should have been CCed on v2. I would also note that some of > the comments below are echos of what Matthias already said in the > previous version but just weren't addressed. > > > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > > index b859431..277d84d 100644 > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > > @@ -7,6 +7,7 @@ > > > > #include <dt-bindings/clock/qcom,gcc-sc7180.h> > > #include <dt-bindings/clock/qcom,rpmh.h> > > +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> > > Header files should be sorted alphabetically. ...or, even better, > base your patch atop mine: > > https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid/ > > ...which adds the gpucc header file so you don't have to. ...and when > you do so, email out a Reviewed-by and/or Tested-by for my patch. ;-) > > > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > #include <dt-bindings/interconnect/qcom,sc7180.h> > > #include <dt-bindings/phy/phy-qcom-qusb2.h> > > @@ -1619,6 +1620,108 @@ > > #interconnect-cells = <1>; > > qcom,bcm-voters = <&apps_bcm_voter>; > > }; > > + > > + gpu: gpu@5000000 { > > + compatible = "qcom,adreno-618.0", "qcom,adreno"; > > Though it's not controversial, please send a patch to: > > Documentation/devicetree/bindings/display/msm/gmu.txt > > ...to add 'qcom,adreno-618.0', like: > > for example: > "qcom,adreno-gmu-618.0", "qcom,adreno-gmu" > "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" > > Probably as part of this you will be asked to convert this file to > yaml. IMO we don't need to block landing this patch on the effort to > convert it to yaml, but you should still work on it. ...or maybe > Jordan wants to work on it? I'll toss it on my to-do list. There always seems to be something more urgent but I should just bite the bullet and get it done. Jordan
On 2020-01-28 03:59, Doug Anderson wrote: > Hi, > > On Mon, Jan 27, 2020 at 1:30 AM Sharat Masetty > <smasetty@codeaurora.org> wrote: >> >> This patch adds the required dt nodes and properties >> to enabled A618 GPU. >> >> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/sc7180.dtsi | 103 >> +++++++++++++++++++++++++++++++++++ >> 1 file changed, 103 insertions(+) > > Note that +Matthias Kaehlcke commented on v1 your patch: > > https://lore.kernel.org/r/20191204220033.GH228856@google.com/ > > ...so he should have been CCed on v2. I would also note that some of > the comments below are echos of what Matthias already said in the > previous version but just weren't addressed. > > >> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> index b859431..277d84d 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi >> @@ -7,6 +7,7 @@ >> >> #include <dt-bindings/clock/qcom,gcc-sc7180.h> >> #include <dt-bindings/clock/qcom,rpmh.h> >> +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> > > Header files should be sorted alphabetically. ...or, even better, > base your patch atop mine: > > https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid/ > > ...which adds the gpucc header file so you don't have to. ...and when > you do so, email out a Reviewed-by and/or Tested-by for my patch. ;-) > > >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/interconnect/qcom,sc7180.h> >> #include <dt-bindings/phy/phy-qcom-qusb2.h> >> @@ -1619,6 +1620,108 @@ >> #interconnect-cells = <1>; >> qcom,bcm-voters = <&apps_bcm_voter>; >> }; >> + >> + gpu: gpu@5000000 { >> + compatible = "qcom,adreno-618.0", >> "qcom,adreno"; > > Though it's not controversial, please send a patch to: > > Documentation/devicetree/bindings/display/msm/gmu.txt > > ...to add 'qcom,adreno-618.0', like: > > for example: > "qcom,adreno-gmu-618.0", "qcom,adreno-gmu" > "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" > > Probably as part of this you will be asked to convert this file to > yaml. IMO we don't need to block landing this patch on the effort to > convert it to yaml, but you should still work on it. ...or maybe > Jordan wants to work on it? > > >> + #stream-id-cells = <16>; >> + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 >> 0 0x1000>, >> + <0 0x05061000 0 0x800>; >> + reg-names = "kgsl_3d0_reg_memory", "cx_mem", >> "cx_dbgc"; >> + interrupts = <GIC_SPI 300 >> IRQ_TYPE_LEVEL_HIGH>; >> + iommus = <&adreno_smmu 0>; >> + operating-points-v2 = <&gpu_opp_table>; >> + interconnects = <&gem_noc MASTER_GFX3D >> &mc_virt SLAVE_EBI1>; > > Running: > $ git fetch > git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git > for-next > $ git grep gem_noc FETCH_HEAD > $ git fetch > git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git > arm64-for-5.7-to-be-rebased > $ git grep gem_noc FETCH_HEAD > > ...shows no hits. That's because the interconnect patches haven't > landed in the tree that you're targeting. In the very least you > should mention somewhere in your email that your patch depends on the > interconnect patches landing, perhaps pointing at: > > https://lore.kernel.org/r/1577782737-32068-4-git-send-email-okukatla@codeaurora.org > > ...but even better would be to split your patch into two parts. The > first patch would be exactly like your patch except without the > "interconnects" line. The 2nd patch would add the interconnects line. > This would allow Bjorn/Andy to land the first patch now and then land > the second patch when the interconnect series is ready. I can confirm > that you can still get basic GPU functionality even without the > interconnects bit so it would be worth landing earlier. > > > I will also note that by basing on a tree that has private patches to > the same file you're touching you make it very hard for a maintainer > to apply. When I try this: > > $ curl https://patchwork.kernel.org/patch/11352261/mbox/ | git am -3 > > I get: > > error: sha1 information is lacking or useless > (arch/arm64/boot/dts/qcom/sc7180.dtsi). > error: could not build fake ancestor > Patch failed at 0001 arm64: dts: qcom: sc7180: Add A618 gpu dt blob > > ...yes, I can apply it with 'git am --show-current-patch | patch -p1' > but it's ugly (and it ends up making things sort in the wrong order). > > >> + adreno_smmu: iommu@5040000 { >> + compatible = "qcom,sc7180-smmu-v2", >> "qcom,smmu-v2"; > > Please send a patch to: > > Documentation/devicetree/bindings/iommu/arm,smmu.yaml > > ...adding 'qcom,sc7180-smmu-v2'. If you do this it will point out > that you've added a new clock: "mem_iface_clk". Is this truly a new > clock in sc7180 compared to previous IOMMUs? ...or is it not really > needed? > > >> + reg = <0 0x05040000 0 0x10000>; >> + #iommu-cells = <1>; >> + #global-interrupts = <2>; >> + interrupts = <GIC_SPI 229 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 231 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 364 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 365 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 366 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 367 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 368 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 369 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 370 >> IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 371 >> IRQ_TYPE_EDGE_RISING>; >> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, >> + <&gcc GCC_GPU_CFG_AHB_CLK>, >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>; >> + >> + clock-names = "bus", "iface", "mem_iface_clk"; > > nit: keep clocks and clock-names next to each other (no blank line). > If you really feel like it needs more space add it between the > clock-names and power-domains. > >> + power-domains = <&gpucc CX_GDSC>; > > Similar to interconnects, gpucc hasn't landed yet. Somewhere you > should point out this fact and ideally point to: > > https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid/ > > ...unlike interconnects, your patch can't land without gpucc, so you > should point this out as a hard dependency. > > >> + }; >> + >> + gmu: gmu@506a000 { >> + compatible="qcom,adreno-gmu-618", >> "qcom,adreno-gmu"; > > As per the bindings, "qcom,adreno-gmu-618" should be > "qcom,adreno-gmu-618.0", right? > > ...and I bet you'd never have guessed that I'll request that you add > "qcom,adreno-gmu-618" to: > > Documentation/devicetree/bindings/display/msm/gmu.txt > > ...and that you'll probably be asked to convert to yaml. Again, maybe > Jordan wants to attempt this? > > >> + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 >> 0 0x10000>, >> + <0 0x0b490000 0 0x10000>; >> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; >> + interrupts = <GIC_SPI 304 >> IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "hfi", "gmu"; >> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, >> + <&gpucc GPU_CC_CXO_CLK>, >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>, >> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; >> + clock-names = "gmu", "cxo", "axi", "memnoc"; >> + power-domains = <&gpucc CX_GDSC>; > > Bindings claim that you need both CX and GC. Is sc7180 somehow > different? Bindings also claim that you should be providing > power-domain-names. No this is still needed, We need the GX power domain for GPU recovery use cases where the shutdown was not successful. I am working the Taniya to get the dependencies sorted out to bring this change in. This should be okay for the time being. > > > >> + iommus = <&adreno_smmu 5>; >> + operating-points-v2 = <&gmu_opp_table>; >> + >> + gmu_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-200000000 { >> + opp-hz = /bits/ 64 >> <200000000>; >> + opp-level = >> <RPMH_REGULATOR_LEVEL_MIN_SVS>; >> + }; >> + }; >> + }; >> }; >> >> thermal-zones { > > Using the "thermal-zones" as context, it looks as if you're asserting > that your new nodes belong at the very end of the pile of nodes with > addresses. This is not true. Looking at the branch > 'arm64-for-5.7-to-be-rebased' on the Qualcomm tree, I see: > > cpufreq_hw: cpufreq@18323000 > > ...which has a larger address than your 0x0506a000. Please sort your > nodes numerically. > > > -Doug
Hi, On Fri, Jan 31, 2020 at 4:16 AM <smasetty@codeaurora.org> wrote: > > >> + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 > >> 0 0x10000>, > >> + <0 0x0b490000 0 0x10000>; > >> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > >> + interrupts = <GIC_SPI 304 > >> IRQ_TYPE_LEVEL_HIGH>, > >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > >> + interrupt-names = "hfi", "gmu"; > >> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > >> + <&gpucc GPU_CC_CXO_CLK>, > >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > >> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > >> + clock-names = "gmu", "cxo", "axi", "memnoc"; > >> + power-domains = <&gpucc CX_GDSC>; > > > > Bindings claim that you need both CX and GC. Is sc7180 somehow > > different? Bindings also claim that you should be providing > > power-domain-names. > No this is still needed, We need the GX power domain for GPU recovery > use cases where the shutdown was not successful. This almost sounds as if the bindings should mark the GX power domain as optional? The driver can function without it but doesn't get all the features? As the binding is written right now I think it is "invalid" to not specify a a GX power domain and once the yaml conversion is done then it will even be flagged as an error. That's going to make it harder to land the your patch... > I am working the Taniya > to get the dependencies sorted out to bring this change in. This should > be > okay for the time being. What breaks today if you add in the GX power domain here? Oh, I see. It's not even provided by the 'gpucc-sc7180.c' file. What happens if you do this for now: power-domains = <&gpucc CX_GDSC>, <0>; power-domain-names = "cx", "gx"; That seems to be the trendy thing to do if a phandle to something is "required" but the code isn't ready for it. -Doug
On Fri, Jan 31, 2020 at 08:08:09AM -0800, Doug Anderson wrote: > Hi, > > On Fri, Jan 31, 2020 at 4:16 AM <smasetty@codeaurora.org> wrote: > > > > >> + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 > > >> 0 0x10000>, > > >> + <0 0x0b490000 0 0x10000>; > > >> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > > >> + interrupts = <GIC_SPI 304 > > >> IRQ_TYPE_LEVEL_HIGH>, > > >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > > >> + interrupt-names = "hfi", "gmu"; > > >> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > > >> + <&gpucc GPU_CC_CXO_CLK>, > > >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > > >> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > > >> + clock-names = "gmu", "cxo", "axi", "memnoc"; > > >> + power-domains = <&gpucc CX_GDSC>; > > > > > > Bindings claim that you need both CX and GC. Is sc7180 somehow > > > different? Bindings also claim that you should be providing > > > power-domain-names. > > No this is still needed, We need the GX power domain for GPU recovery > > use cases where the shutdown was not successful. > > This almost sounds as if the bindings should mark the GX power domain > as optional? The driver can function without it but doesn't get all > the features? As the binding is written right now I think it is > "invalid" to not specify a a GX power domain and once the yaml > conversion is done then it will even be flagged as an error. That's > going to make it harder to land the your patch... For GMU attached targets the GX power domain is mandatory assuming you want to recover successfully from a hard GMU hang, that is. Jordan
Hi, On Fri, Jan 31, 2020 at 1:18 PM Jordan Crouse <jcrouse@codeaurora.org> wrote: > > On Fri, Jan 31, 2020 at 08:08:09AM -0800, Doug Anderson wrote: > > Hi, > > > > On Fri, Jan 31, 2020 at 4:16 AM <smasetty@codeaurora.org> wrote: > > > > > > >> + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 > > > >> 0 0x10000>, > > > >> + <0 0x0b490000 0 0x10000>; > > > >> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; > > > >> + interrupts = <GIC_SPI 304 > > > >> IRQ_TYPE_LEVEL_HIGH>, > > > >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; > > > >> + interrupt-names = "hfi", "gmu"; > > > >> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, > > > >> + <&gpucc GPU_CC_CXO_CLK>, > > > >> + <&gcc GCC_DDRSS_GPU_AXI_CLK>, > > > >> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; > > > >> + clock-names = "gmu", "cxo", "axi", "memnoc"; > > > >> + power-domains = <&gpucc CX_GDSC>; > > > > > > > > Bindings claim that you need both CX and GC. Is sc7180 somehow > > > > different? Bindings also claim that you should be providing > > > > power-domain-names. > > > No this is still needed, We need the GX power domain for GPU recovery > > > use cases where the shutdown was not successful. > > > > This almost sounds as if the bindings should mark the GX power domain > > as optional? The driver can function without it but doesn't get all > > the features? As the binding is written right now I think it is > > "invalid" to not specify a a GX power domain and once the yaml > > conversion is done then it will even be flagged as an error. That's > > going to make it harder to land the your patch... > > For GMU attached targets the GX power domain is mandatory assuming you want to > recover successfully from a hard GMU hang, that is. Sure. I guess we can quibble about whether this means optional or mandatory, but it won't gain much. ;-) ...seems like for now (assuming it works) we should at least specify it and put a <0>. Then we should make it a relatively high priority to get it hooked up more properly. -Doug
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index b859431..277d84d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,gcc-sc7180.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,gpucc-sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> @@ -1619,6 +1620,108 @@ #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; + + gpu: gpu@5000000 { + compatible = "qcom,adreno-618.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, + <0 0x05061000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-565000000 { + opp-hz = /bits/ 64 <565000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>; + + clock-names = "bus", "iface", "mem_iface_clk"; + power-domains = <&gpucc CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-618", "qcom,adreno-gmu"; + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + power-domains = <&gpucc CX_GDSC>; + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; }; thermal-zones {
This patch adds the required dt nodes and properties to enabled A618 GPU. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 103 +++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)