From patchwork Fri Feb 21 07:48:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kevin Tang X-Patchwork-Id: 11396265 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 8214A14E3 for ; Fri, 21 Feb 2020 11:15:38 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 02B6324656 for ; Fri, 21 Feb 2020 11:15:31 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="WLT64HVP" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 02B6324656 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=gmail.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 283136F408; Fri, 21 Feb 2020 11:14:29 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail-pg1-x543.google.com (mail-pg1-x543.google.com [IPv6:2607:f8b0:4864:20::543]) by gabe.freedesktop.org (Postfix) with ESMTPS id 567B16EEB0 for ; Fri, 21 Feb 2020 07:49:26 +0000 (UTC) Received: by mail-pg1-x543.google.com with SMTP id u12so548780pgb.10 for ; Thu, 20 Feb 2020 23:49:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=ICSVFOtC1ZHC7UQePAg3JKSnfXJ3q454jvAxhn3X+4Q=; b=WLT64HVPURLb7Fa2Pl1vZpTTVK22FNt0j3LpwHWFktBeFaYIKYvnKFvuFpCLBRztM+ /Rgi9fx8doA61xyO038oTnxsbZSpIpzPtit+om8Rnw4c1DZDjPY1zq8tg6k4oQuWDFpt AAiimz+DRtbTWRDHWROTpcEzyRyX0En6Bhr4qdpdk8mQItQrnWr33FqXOdRiOJi4XWcA qGFOlLMlDQ2r1QofFCZtZeT5wTuvp7cZjcd3UtC6bYfuyMBSs+u+kQ7YjWTXqszrUD/p 9ccw/zwv6VH00y5014u2grQRnZBegjHAwjTEnFRWB5azkvyiZkSeoJLAVS39ZpKhCp2x wdgA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=ICSVFOtC1ZHC7UQePAg3JKSnfXJ3q454jvAxhn3X+4Q=; b=Lx7SNZq8TOMsiCN6I/trVrUXxBEG6uwcsYMy8B5BcOGVJuaX81RSasGWSko2GYn9lW XJmvxLrJPfgVnfHMheRlzxkBtK5ZMvoCXEXs0/SE8ExHbuslZulZWC6Tq0N6mRaYdBe9 kmy3jchpiUSkk4vZf3/fhX2aaEtj7c/n4aP/9t4uwj2twj7jAEpqGAX/hz6Xezhtwfmy 3AdUdN7mNPYi9BPkmdSywa/syU0R/7ZjMrbPyA/+A7bdCzeO0zfg6ppZtc7tMj9FDFRM QKe8m17p8xiG1hBeQJho2zC3SR5WuE96FyZa8f3O/oIP2judDx9N92h2faaxwz++FPvF 0Cvg== X-Gm-Message-State: APjAAAXFv5+vI3dTIg7tDNHzkjoOugXju+2Y5DcSIo77Fpd7LRyzDM/T vi1OnbUifu8HCPPC8E1MjBs= X-Google-Smtp-Source: APXvYqz6X79xJuMBRXHi+J+7Qdqz2mz7zfWPLjgbbrp+hOXmpKULPySPHz1pB1MKXr3QBaiVamiyig== X-Received: by 2002:a62:e411:: with SMTP id r17mr34348697pfh.119.1582271365078; Thu, 20 Feb 2020 23:49:25 -0800 (PST) Received: from nj08008nbu.spreadtrum.com ([117.18.48.82]) by smtp.gmail.com with ESMTPSA id d1sm1444653pgj.79.2020.02.20.23.49.21 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Thu, 20 Feb 2020 23:49:24 -0800 (PST) From: Kevin Tang To: airlied@linux.ie, daniel@ffwll.ch, robh+dt@kernel.org, mark.rutland@arm.com, kevin3.tang@gmail.com Subject: [PATCH RFC v3 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver Date: Fri, 21 Feb 2020 15:48:56 +0800 Message-Id: <1582271336-3708-7-git-send-email-kevin3.tang@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1582271336-3708-1-git-send-email-kevin3.tang@gmail.com> References: <1582271336-3708-1-git-send-email-kevin3.tang@gmail.com> X-Mailman-Approved-At: Fri, 21 Feb 2020 11:14:23 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: orsonzhai@gmail.com, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, zhang.lyra@gmail.com, baolin.wang@linaro.org MIME-Version: 1.0 Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Adds dsi host controller support for the Unisoc's display subsystem. Adds dsi phy support for the Unisoc's display subsystem. Only MIPI DSI Displays supported, DP/TV/HMDI will be support in the feature. Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Signed-off-by: Kevin Tang --- drivers/gpu/drm/sprd/Makefile | 6 +- drivers/gpu/drm/sprd/dphy/Makefile | 7 + drivers/gpu/drm/sprd/dphy/pll/Makefile | 3 + drivers/gpu/drm/sprd/dphy/pll/megacores_sharkle.c | 628 +++++++++ drivers/gpu/drm/sprd/dphy/sprd_dphy_api.c | 254 ++++ drivers/gpu/drm/sprd/dphy/sprd_dphy_hal.h | 329 +++++ drivers/gpu/drm/sprd/dsi/Makefile | 7 + drivers/gpu/drm/sprd/dsi/core/Makefile | 3 + drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.c | 1169 +++++++++++++++++ drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.h | 1417 +++++++++++++++++++++ drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0_ppi.c | 375 ++++++ drivers/gpu/drm/sprd/dsi/sprd_dsi_api.c | 544 ++++++++ drivers/gpu/drm/sprd/dsi/sprd_dsi_api.h | 28 + drivers/gpu/drm/sprd/dsi/sprd_dsi_hal.h | 1102 ++++++++++++++++ drivers/gpu/drm/sprd/sprd_dphy.c | 225 ++++ drivers/gpu/drm/sprd/sprd_dphy.h | 99 ++ drivers/gpu/drm/sprd/sprd_drm.c | 2 + drivers/gpu/drm/sprd/sprd_drm.h | 2 + drivers/gpu/drm/sprd/sprd_dsi.c | 655 ++++++++++ drivers/gpu/drm/sprd/sprd_dsi.h | 192 +++ 20 files changed, 7046 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/sprd/dphy/Makefile create mode 100644 drivers/gpu/drm/sprd/dphy/pll/Makefile create mode 100644 drivers/gpu/drm/sprd/dphy/pll/megacores_sharkle.c create mode 100644 drivers/gpu/drm/sprd/dphy/sprd_dphy_api.c create mode 100644 drivers/gpu/drm/sprd/dphy/sprd_dphy_hal.h create mode 100644 drivers/gpu/drm/sprd/dsi/Makefile create mode 100644 drivers/gpu/drm/sprd/dsi/core/Makefile create mode 100644 drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.c create mode 100644 drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.h create mode 100644 drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0_ppi.c create mode 100644 drivers/gpu/drm/sprd/dsi/sprd_dsi_api.c create mode 100644 drivers/gpu/drm/sprd/dsi/sprd_dsi_api.h create mode 100644 drivers/gpu/drm/sprd/dsi/sprd_dsi_hal.h create mode 100644 drivers/gpu/drm/sprd/sprd_dphy.c create mode 100644 drivers/gpu/drm/sprd/sprd_dphy.h create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile index c94c8ac..d98f8d3 100644 --- a/drivers/gpu/drm/sprd/Makefile +++ b/drivers/gpu/drm/sprd/Makefile @@ -5,7 +5,11 @@ ccflags-y += -Iinclude/drm subdir-ccflags-y += -I$(src) obj-y := sprd_drm.o \ - sprd_dpu.o + sprd_dpu.o \ + sprd_dsi.o \ + sprd_dphy.o obj-y += disp_lib.o obj-y += dpu/ +obj-y += dsi/ +obj-y += dphy/ \ No newline at end of file diff --git a/drivers/gpu/drm/sprd/dphy/Makefile b/drivers/gpu/drm/sprd/dphy/Makefile new file mode 100644 index 0000000..8a1012d6 --- /dev/null +++ b/drivers/gpu/drm/sprd/dphy/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +subdir-ccflags-y += -I$(src) + +obj-y := sprd_dphy_api.o + +obj-y += pll/ diff --git a/drivers/gpu/drm/sprd/dphy/pll/Makefile b/drivers/gpu/drm/sprd/dphy/pll/Makefile new file mode 100644 index 0000000..1fe9638 --- /dev/null +++ b/drivers/gpu/drm/sprd/dphy/pll/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += megacores_sharkle.o \ No newline at end of file diff --git a/drivers/gpu/drm/sprd/dphy/pll/megacores_sharkle.c b/drivers/gpu/drm/sprd/dphy/pll/megacores_sharkle.c new file mode 100644 index 0000000..c88d78c --- /dev/null +++ b/drivers/gpu/drm/sprd/dphy/pll/megacores_sharkle.c @@ -0,0 +1,628 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "sprd_dphy.h" + +#define L 0 +#define H 1 +#define CLK 0 +#define DATA 1 +#define INFINITY 0xffffffff +#define MIN_OUTPUT_FREQ (100) + +#define AVERAGE(a, b) (min(a, b) + abs((b) - (a)) / 2) + +enum TIMING { + NONE, + REQUEST_TIME, + PREPARE_TIME, + SETTLE_TIME, + ZERO_TIME, + TRAIL_TIME, + EXIT_TIME, + CLKPOST_TIME, + TA_GET, + TA_GO, + TA_SURE, + TA_WAIT, +}; + +struct pll_regs { + union __reg_03__ { + struct __03 { + u8 prbs_bist: 1; + u8 en_lp_treot: 1; + u8 lpf_sel: 4; + u8 txfifo_bypass: 1; + u8 freq_hopping: 1; + } bits; + u8 val; + } _03; + union __reg_04__ { + struct __04 { + u8 div: 3; + u8 masterof8lane: 1; + u8 hop_trig: 1; + u8 cp_s: 2; + u8 fdk_s: 1; + } bits; + u8 val; + } _04; + union __reg_06__ { + struct __06 { + u8 nint: 7; + u8 mod_en: 1; + } bits; + u8 val; + } _06; + union __reg_07__ { + struct __07 { + u8 kdelta_h: 8; + } bits; + u8 val; + } _07; + union __reg_08__ { + struct __08 { + u8 vco_band: 1; + u8 sdm_en: 1; + u8 refin: 2; + u8 kdelta_l: 4; + } bits; + u8 val; + } _08; + union __reg_09__ { + struct __09 { + u8 kint_h: 8; + } bits; + u8 val; + } _09; + union __reg_0a__ { + struct __0a { + u8 kint_m: 8; + } bits; + u8 val; + } _0a; + union __reg_0b__ { + struct __0b { + u8 out_sel: 4; + u8 kint_l: 4; + } bits; + u8 val; + } _0b; + union __reg_0c__ { + struct __0c { + u8 kstep_h: 8; + } bits; + u8 val; + } _0c; + union __reg_0d__ { + struct __0d { + u8 kstep_m: 8; + } bits; + u8 val; + } _0d; + union __reg_0e__ { + struct __0e { + u8 pll_pu_byp: 1; + u8 pll_pu: 1; + u8 hsbist_len: 2; + u8 stopstate_sel: 1; + u8 kstep_l: 3; + } bits; + u8 val; + } _0e; + + union __reg_0f__ { + struct __0f { + u8 det_delay:2; + /*12 - 15 -> bit2 - bit5*/ + u8 kdelta: 4; + u8 ldo0p4:2; + } bits; + u8 val; + } _0f; + +}; + +struct dphy_pll { + u8 refin; /* Pre-divider control signal */ + u8 cp_s; /* 00: SDM_EN=1, 10: SDM_EN=0 */ + u8 fdk_s; /* PLL mode control: integer or fraction */ + u8 hop_en; + u8 mod_en; /* ssc enable */ + u8 sdm_en; + u8 div; + u8 int_n; /* integer N PLL */ + u32 ref_clk; /* dphy reference clock, unit: MHz */ + u32 freq; /* panel config, unit: KHz */ + int hop_delta; + u32 hop_period; + u32 fvco; /* MHz */ + u32 potential_fvco; /* MHz */ + u32 nint; /* sigma delta modulator NINT control */ + u32 kint; /* sigma delta modulator KINT control */ + u32 sign; + u32 kdelta; + u32 kstep; + u8 lpf_sel; /* low pass filter control */ + u8 out_sel; /* post divider control */ + u8 vco_band; /* vco range */ + u8 det_delay; +}; + +static struct pll_regs regs; +static struct dphy_pll pll; + +/* sharkle */ +#define VCO_BAND_LOW 750 +#define VCO_BAND_MID 1100 +#define VCO_BAND_HIGH 1500 +#define PHY_REF_CLK 26000 + +static int dphy_calc_pll_param(struct dphy_pll *pll) +{ + int i; + const u32 khz = 1000; + const u32 mhz = 1000000; + const unsigned long long factor = 100; + unsigned long long tmp; + u8 delta; + + if (!pll || !pll->freq) + goto FAIL; + + pll->potential_fvco = pll->freq / khz; /* MHz */ + pll->ref_clk = PHY_REF_CLK / khz; /* MHz */ + + for (i = 0; i < 4; ++i) { + if (pll->potential_fvco >= VCO_BAND_LOW && + pll->potential_fvco <= VCO_BAND_HIGH) { + pll->fvco = pll->potential_fvco; + pll->out_sel = BIT(i); + break; + } + pll->potential_fvco <<= 1; + } + if (pll->fvco == 0) + goto FAIL; + + if (pll->fvco >= VCO_BAND_LOW && pll->fvco <= VCO_BAND_MID) { + /* vco band control */ + pll->vco_band = 0x0; + /* low pass filter control */ + pll->lpf_sel = 1; + } else if (pll->fvco > VCO_BAND_MID && pll->fvco <= VCO_BAND_HIGH) { + pll->vco_band = 0x1; + pll->lpf_sel = 0; + } else + goto FAIL; + + pll->nint = pll->fvco / pll->ref_clk; + tmp = pll->fvco * factor * mhz; + do_div(tmp, pll->ref_clk); + tmp = tmp - pll->nint * factor * mhz; + tmp *= BIT(20); + do_div(tmp, 100000000); + pll->kint = (u32)tmp; + pll->refin = 3; /* pre-divider bypass */ + pll->sdm_en = true; /* use fraction N PLL */ + pll->fdk_s = 0x1; /* fraction */ + pll->cp_s = 0x0; + pll->det_delay = 0x1; + + if (pll->hop_en) { + if ((pll->hop_delta == 0) || (pll->hop_period == 0)) + return 0; + + if (pll->hop_delta < 0) { + delta = -pll->hop_delta; + pll->sign = true; + } else { + delta = pll->hop_delta; + pll->sign = false; + } + delta = delta * (i + 1); + pll->kstep = pll->ref_clk * pll->hop_period; + pll->kdelta = (1 << 20) * delta / pll->ref_clk / + pll->kstep + pll->sign * (1 << 11); + } + + if (pll->mod_en) { + delta = pll->freq / khz * 2 * (i + 1) * 15 / 1000; + pll->kstep = pll->ref_clk * pll->hop_period; + pll->kdelta = (((1 << 20) * delta / pll->ref_clk / + pll->kstep)); + } + + return 0; + +FAIL: + if (pll) + pll->fvco = 0; + + pr_err("failed to calculate dphy pll parameters\n"); + + return -1; +} + +static int dphy_set_pll_reg(struct regmap *regmap, struct dphy_pll *pll) +{ + int i; + u8 *val; + + u8 regs_addr[] = { + 0x03, 0x04, 0x06, 0x07, 0x08, 0x09, + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f + }; + + if (!pll || !pll->fvco) + goto FAIL; + + regs._03.bits.prbs_bist = 1; + regs._03.bits.en_lp_treot = true; + regs._03.bits.lpf_sel = pll->lpf_sel; + regs._03.bits.txfifo_bypass = 0; + regs._03.bits.freq_hopping = pll->hop_en; + regs._04.bits.div = pll->div; + regs._04.bits.masterof8lane = 1; + regs._04.bits.cp_s = pll->cp_s; + regs._04.bits.fdk_s = pll->fdk_s; + regs._06.bits.nint = pll->nint; + regs._06.bits.mod_en = pll->mod_en; + regs._07.bits.kdelta_h = pll->kdelta >> 4; + regs._07.bits.kdelta_h |= pll->sign << 7; + regs._08.bits.vco_band = pll->vco_band; + regs._08.bits.sdm_en = pll->sdm_en; + regs._08.bits.refin = pll->refin; + regs._08.bits.kdelta_l = pll->kdelta & 0xf; + regs._09.bits.kint_h = pll->kint >> 12; + regs._0a.bits.kint_m = (pll->kint >> 4) & 0xff; + regs._0b.bits.out_sel = pll->out_sel; + regs._0b.bits.kint_l = pll->kint & 0xf; + regs._0c.bits.kstep_h = pll->kstep >> 11; + regs._0d.bits.kstep_m = (pll->kstep >> 3) & 0xff; + regs._0e.bits.pll_pu_byp = 0; + regs._0e.bits.pll_pu = 0; + regs._0e.bits.stopstate_sel = 1; + regs._0e.bits.kstep_l = pll->kstep & 0x7; + regs._0f.bits.det_delay = pll->det_delay; + regs._0f.bits.kdelta = pll->kdelta >> 12; + + val = (u8 *)®s; + + for (i = 0; i < sizeof(regs_addr); ++i) { + regmap_write(regmap, regs_addr[i], val[i]); + pr_debug("%02x: %02x\n", regs_addr[i], val[i]); + } + + return 0; + +FAIL: + pr_err("failed to set dphy pll registers\n"); + + return -1; +} + +static int dphy_pll_config(struct dphy_context *ctx) +{ + int ret; + struct regmap *regmap = ctx->regmap; + + pll.freq = ctx->freq; + + /* FREQ = 26M * (NINT + KINT / 2^20) / out_sel */ + ret = dphy_calc_pll_param(&pll); + if (ret) + goto FAIL; + ret = dphy_set_pll_reg(regmap, &pll); + if (ret) + goto FAIL; + + return 0; + +FAIL: + pr_err("failed to config dphy pll\n"); + + return -1; +} + +static int dphy_set_timing_regs(struct regmap *regmap, int type, u8 val[]) +{ + switch (type) { + case REQUEST_TIME: + regmap_write(regmap, 0x31, val[CLK]); + regmap_write(regmap, 0x41, val[DATA]); + regmap_write(regmap, 0x51, val[DATA]); + regmap_write(regmap, 0x61, val[DATA]); + regmap_write(regmap, 0x71, val[DATA]); + + regmap_write(regmap, 0x90, val[CLK]); + regmap_write(regmap, 0xa0, val[DATA]); + regmap_write(regmap, 0xb0, val[DATA]); + regmap_write(regmap, 0xc0, val[DATA]); + regmap_write(regmap, 0xd0, val[DATA]); + break; + case PREPARE_TIME: + regmap_write(regmap, 0x32, val[CLK]); + regmap_write(regmap, 0x42, val[DATA]); + regmap_write(regmap, 0x52, val[DATA]); + regmap_write(regmap, 0x62, val[DATA]); + regmap_write(regmap, 0x72, val[DATA]); + + regmap_write(regmap, 0x91, val[CLK]); + regmap_write(regmap, 0xa1, val[DATA]); + regmap_write(regmap, 0xb1, val[DATA]); + regmap_write(regmap, 0xc1, val[DATA]); + regmap_write(regmap, 0xd1, val[DATA]); + break; + case ZERO_TIME: + regmap_write(regmap, 0x33, val[CLK]); + regmap_write(regmap, 0x43, val[DATA]); + regmap_write(regmap, 0x53, val[DATA]); + regmap_write(regmap, 0x63, val[DATA]); + regmap_write(regmap, 0x73, val[DATA]); + + regmap_write(regmap, 0x92, val[CLK]); + regmap_write(regmap, 0xa2, val[DATA]); + regmap_write(regmap, 0xb2, val[DATA]); + regmap_write(regmap, 0xc2, val[DATA]); + regmap_write(regmap, 0xd2, val[DATA]); + break; + case TRAIL_TIME: + regmap_write(regmap, 0x34, val[CLK]); + regmap_write(regmap, 0x44, val[DATA]); + regmap_write(regmap, 0x54, val[DATA]); + regmap_write(regmap, 0x64, val[DATA]); + regmap_write(regmap, 0x74, val[DATA]); + + regmap_write(regmap, 0x93, val[CLK]); + regmap_write(regmap, 0xa3, val[DATA]); + regmap_write(regmap, 0xb3, val[DATA]); + regmap_write(regmap, 0xc3, val[DATA]); + regmap_write(regmap, 0xd3, val[DATA]); + break; + case EXIT_TIME: + regmap_write(regmap, 0x36, val[CLK]); + regmap_write(regmap, 0x46, val[DATA]); + regmap_write(regmap, 0x56, val[DATA]); + regmap_write(regmap, 0x66, val[DATA]); + regmap_write(regmap, 0x76, val[DATA]); + + regmap_write(regmap, 0x95, val[CLK]); + regmap_write(regmap, 0xA5, val[DATA]); + regmap_write(regmap, 0xB5, val[DATA]); + regmap_write(regmap, 0xc5, val[DATA]); + regmap_write(regmap, 0xd5, val[DATA]); + break; + case CLKPOST_TIME: + regmap_write(regmap, 0x35, val[CLK]); + regmap_write(regmap, 0x94, val[CLK]); + break; + + /* the following just use default value */ + case SETTLE_TIME: + case TA_GET: + case TA_GO: + case TA_SURE: + break; + default: + break; + } + return 0; +} + +static int dphy_timing_config(struct dphy_context *ctx) +{ + u8 val[2]; + u32 tmp = 0; + u32 range[2], constant; + u32 t_ui, t_byteck, t_half_byteck; + const u32 factor = 2; + const u32 scale = 100; + struct regmap *regmap = ctx->regmap; + + /* t_ui: 1 ui, byteck: 8 ui, half byteck: 4 ui */ + t_ui = 1000 * scale / (ctx->freq / 1000); + t_byteck = t_ui << 3; + t_half_byteck = t_ui << 2; + constant = t_ui << 1; + + /* REQUEST_TIME: HS T-LPX: LP-01 + * For T-LPX, mipi spec defined min value is 50ns, + * but maybe it shouldn't be too small, because BTA, + * LP-10, LP-00, LP-01, all of this is related to T-LPX. + */ + range[L] = 50 * scale; + range[H] = INFINITY; + val[CLK] = DIV_ROUND_UP(range[L] * (factor << 1), t_byteck) - 2; + val[DATA] = val[CLK]; + dphy_set_timing_regs(regmap, REQUEST_TIME, val); + + /* PREPARE_TIME: HS sequence: LP-00 */ + range[L] = 38 * scale; + range[H] = 95 * scale; + tmp = AVERAGE(range[L], range[H]); + val[CLK] = DIV_ROUND_UP(AVERAGE(range[L], range[H]), + t_half_byteck) - 1; + range[L] = 40 * scale + 4 * t_ui; + range[H] = 85 * scale + 6 * t_ui; + tmp |= AVERAGE(range[L], range[H]) << 16; + val[DATA] = DIV_ROUND_UP(AVERAGE(range[L], range[H]), + t_half_byteck) - 1; + dphy_set_timing_regs(regmap, PREPARE_TIME, val); + + /* ZERO_TIME: HS-ZERO */ + range[L] = 300 * scale; + range[H] = INFINITY; + val[CLK] = DIV_ROUND_UP(range[L] * factor + (tmp & 0xffff) + - 525 * t_byteck / 100, t_byteck) - 2; + range[L] = 145 * scale + 10 * t_ui; + val[DATA] = DIV_ROUND_UP(range[L] * factor + + ((tmp >> 16) & 0xffff) - 525 * t_byteck / 100, + t_byteck) - 2; + dphy_set_timing_regs(regmap, ZERO_TIME, val); + + /* TRAIL_TIME: HS-TRAIL */ + range[L] = 60 * scale; + range[H] = INFINITY; + val[CLK] = DIV_ROUND_UP(range[L] * factor - constant, t_half_byteck); + range[L] = max(8 * t_ui, 60 * scale + 4 * t_ui); + val[DATA] = DIV_ROUND_UP(range[L] * 3 / 2 - constant, t_half_byteck) - 2; + dphy_set_timing_regs(regmap, TRAIL_TIME, val); + + /* EXIT_TIME: */ + range[L] = 100 * scale; + range[H] = INFINITY; + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2; + val[DATA] = val[CLK]; + dphy_set_timing_regs(regmap, EXIT_TIME, val); + + /* CLKPOST_TIME: */ + range[L] = 60 * scale + 52 * t_ui; + range[H] = INFINITY; + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2; + val[DATA] = val[CLK]; + dphy_set_timing_regs(regmap, CLKPOST_TIME, val); + + /* SETTLE_TIME: + * This time is used for receiver. So for transmitter, + * it can be ignored. + */ + + /* TA_GO: + * transmitter drives bridge state(LP-00) before releasing control, + * reg 0x1f default value: 0x04, which is good. + */ + + /* TA_SURE: + * After LP-10 state and before bridge state(LP-00), + * reg 0x20 default value: 0x01, which is good. + */ + + /* TA_GET: + * receiver drives Bridge state(LP-00) before releasing control + * reg 0x21 default value: 0x03, which is good. + */ + + return 0; +} + +static int dphy_hop_start(struct dphy_context *ctx) +{ + struct regmap *regmap = ctx->regmap; + + /* start hopping */ + regs._04.bits.hop_trig = !regs._04.bits.hop_trig; + regmap_write(regmap, 0x04, regs._04.val); + + mdelay(1); + + pr_info("start hopping\n"); + return 0; +} + +static int dphy_hop_stop(struct dphy_context *ctx) +{ + struct regmap *regmap = ctx->regmap; + + regs._03.bits.freq_hopping = 0; + regmap_write(regmap, 0x03, regs._03.val); + + pr_info("stop hopping\n"); + return 0; +} + +static int dphy_hop_config(struct dphy_context *ctx, int delta, int period) +{ + dphy_hop_stop(ctx); + + if (delta == 0) { + pll.hop_en = false; + return 0; + } + + pll.hop_en = true; + pll.mod_en = false; + pll.hop_delta = delta / 1000; /* Mhz */ + pll.hop_period = period; /* us */ + + dphy_pll_config(ctx); + dphy_hop_start(ctx); + + return 0; +} + +static int dphy_ssc_start(struct dphy_context *ctx) +{ + pll.mod_en = true; + pll.hop_en = false; + pll.hop_period = 15;/* us */ + + dphy_pll_config(ctx); + + mdelay(1); + + return 0; +} + +static int dphy_ssc_stop(struct dphy_context *ctx) +{ + struct regmap *regmap = ctx->regmap; + + pll.mod_en = false; + regs._06.bits.mod_en = false; + regmap_write(regmap, 0x06, regs._06.val); + + return 0; +} + +static int dphy_ssc_en(struct dphy_context *ctx, bool en) +{ + if (en) { + pr_info("ssc enable\n"); + dphy_ssc_start(ctx); + } else { + dphy_ssc_stop(ctx); + pr_info("ssc disable\n"); + } + + return 0; +} + +/** + * Force D-PHY PLL to stay on while in ULPS + * @param phy: pointer to structure + * which holds information about the d-phy module + * @param force (1) disable (0) + * @note To follow the programming model, use wakeup_pll function + */ +static void dphy_force_pll(struct dphy_context *ctx, int force) +{ + u8 data; + struct regmap *regmap = ctx->regmap; + + if (force) + data = 0x03; + else + data = 0x0; + + /* for megocores, to force pll, dphy register should be set */ + regmap_write(regmap, 0x0e, data); +} + +struct dphy_pll_ops sharkle_dphy_pll_ops = { + .pll_config = dphy_pll_config, + .timing_config = dphy_timing_config, + .hop_config = dphy_hop_config, + .ssc_en = dphy_ssc_en, + .force_pll = dphy_force_pll, +}; diff --git a/drivers/gpu/drm/sprd/dphy/sprd_dphy_api.c b/drivers/gpu/drm/sprd/dphy/sprd_dphy_api.c new file mode 100644 index 0000000..96c02d5 --- /dev/null +++ b/drivers/gpu/drm/sprd/dphy/sprd_dphy_api.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include + +#include "sprd_dphy_hal.h" + +static int dphy_wait_pll_locked(struct sprd_dphy *dphy) +{ + u32 i = 0; + + for (i = 0; i < 50000; i++) { + if (dphy_hal_is_pll_locked(dphy)) + return 0; + udelay(3); + } + + pr_err("error: dphy pll can not be locked\n"); + return -1; +} + +static int dphy_wait_datalane_stop_state(struct sprd_dphy *dphy, u8 mask) +{ + u32 i = 0; + + for (i = 0; i < 5000; i++) { + if (dphy_hal_is_stop_state_datalane(dphy) == mask) + return 0; + udelay(10); + } + + pr_err("wait datalane stop-state time out\n"); + return -1; +} + +static int dphy_wait_datalane_ulps_active(struct sprd_dphy *dphy, u8 mask) +{ + u32 i = 0; + + for (i = 0; i < 5000; i++) { + if (dphy_hal_is_ulps_active_datalane(dphy) == mask) + return 0; + udelay(10); + } + + pr_err("wait datalane ulps-active time out\n"); + return -1; +} + +static int dphy_wait_clklane_stop_state(struct sprd_dphy *dphy) +{ + u32 i = 0; + + for (i = 0; i < 5000; i++) { + if (dphy_hal_is_stop_state_clklane(dphy)) + return 0; + udelay(10); + } + + pr_err("wait clklane stop-state time out\n"); + return -1; +} + +static int dphy_wait_clklane_ulps_active(struct sprd_dphy *dphy) +{ + u32 i = 0; + + for (i = 0; i < 5000; i++) { + if (dphy_hal_is_ulps_active_clklane(dphy)) + return 0; + udelay(10); + } + + pr_err("wait clklane ulps-active time out\n"); + return -1; +} + +int sprd_dphy_configure(struct sprd_dphy *dphy) +{ + struct dphy_pll_ops *pll = dphy->pll; + struct dphy_context *ctx = &dphy->ctx; + + pr_info("lanes : %d\n", ctx->lanes); + pr_info("freq : %d\n", ctx->freq); + + dphy_hal_rstz(dphy, 0); + dphy_hal_shutdownz(dphy, 0); + dphy_hal_clklane_en(dphy, 0); + + dphy_hal_test_clr(dphy, 0); + dphy_hal_test_clr(dphy, 1); + dphy_hal_test_clr(dphy, 0); + + pll->pll_config(ctx); + pll->timing_config(ctx); + + dphy_hal_shutdownz(dphy, 1); + dphy_hal_rstz(dphy, 1); + dphy_hal_stop_wait_time(dphy, 0x1C); + dphy_hal_clklane_en(dphy, 1); + dphy_hal_datalane_en(dphy); + + if (dphy_wait_pll_locked(dphy)) + return -1; + + return 0; +} + +void sprd_dphy_reset(struct sprd_dphy *dphy) +{ + dphy_hal_rstz(dphy, 0); + udelay(10); + dphy_hal_rstz(dphy, 1); +} + +void sprd_dphy_shutdown(struct sprd_dphy *dphy) +{ + dphy_hal_shutdownz(dphy, 0); + udelay(10); + dphy_hal_shutdownz(dphy, 1); +} + +int sprd_dphy_hop_config(struct sprd_dphy *dphy, int delta, int period) +{ + struct dphy_pll_ops *pll = dphy->pll; + struct dphy_context *ctx = &dphy->ctx; + + if (pll->hop_config) + return pll->hop_config(ctx, delta, period); + + return 0; +} + +int sprd_dphy_ssc_en(struct sprd_dphy *dphy, bool en) +{ + struct dphy_pll_ops *pll = dphy->pll; + struct dphy_context *ctx = &dphy->ctx; + + if (pll->ssc_en) + return pll->ssc_en(ctx, en); + + return 0; +} + +int sprd_dphy_close(struct sprd_dphy *dphy) +{ + if (!dphy) + return -1; + + dphy_hal_rstz(dphy, 0); + dphy_hal_shutdownz(dphy, 0); + dphy_hal_rstz(dphy, 1); + + return 0; +} + +int sprd_dphy_data_ulps_enter(struct sprd_dphy *dphy) +{ + u8 lane_mask = (1 << dphy->ctx.lanes) - 1; + + dphy_hal_datalane_ulps_rqst(dphy, 1); + + dphy_wait_datalane_ulps_active(dphy, lane_mask); + + dphy_hal_datalane_ulps_rqst(dphy, 0); + + return 0; +} + +int sprd_dphy_data_ulps_exit(struct sprd_dphy *dphy) +{ + u8 lane_mask = (1 << dphy->ctx.lanes) - 1; + + dphy_hal_datalane_ulps_exit(dphy, 1); + + dphy_wait_datalane_stop_state(dphy, lane_mask); + + dphy_hal_datalane_ulps_exit(dphy, 0); + + return 0; +} + +int sprd_dphy_clk_ulps_enter(struct sprd_dphy *dphy) +{ + dphy_hal_clklane_ulps_rqst(dphy, 1); + + dphy_wait_clklane_ulps_active(dphy); + + dphy_hal_clklane_ulps_rqst(dphy, 0); + + return 0; +} + +int sprd_dphy_clk_ulps_exit(struct sprd_dphy *dphy) +{ + dphy_hal_clklane_ulps_exit(dphy, 1); + + dphy_wait_clklane_stop_state(dphy); + + dphy_hal_clklane_ulps_exit(dphy, 0); + + return 0; +} + +void sprd_dphy_force_pll(struct sprd_dphy *dphy, bool enable) +{ + dphy_hal_force_pll(dphy, enable); +} + +void sprd_dphy_hs_clk_en(struct sprd_dphy *dphy, bool enable) +{ + dphy_hal_clk_hs_rqst(dphy, enable); + + dphy_wait_pll_locked(dphy); +} + +void sprd_dphy_test_write(struct sprd_dphy *dphy, u8 address, u8 data) +{ + dphy_hal_test_en(dphy, 1); + + dphy_hal_test_din(dphy, address); + + dphy_hal_test_clk(dphy, 1); + dphy_hal_test_clk(dphy, 0); + + dphy_hal_test_en(dphy, 0); + + dphy_hal_test_din(dphy, data); + + dphy_hal_test_clk(dphy, 1); + dphy_hal_test_clk(dphy, 0); +} + +u8 sprd_dphy_test_read(struct sprd_dphy *dphy, u8 address) +{ + dphy_hal_test_en(dphy, 1); + + dphy_hal_test_din(dphy, address); + + dphy_hal_test_clk(dphy, 1); + dphy_hal_test_clk(dphy, 0); + + dphy_hal_test_en(dphy, 0); + + udelay(1); + + return dphy_hal_test_dout(dphy); +} + + + diff --git a/drivers/gpu/drm/sprd/dphy/sprd_dphy_hal.h b/drivers/gpu/drm/sprd/dphy/sprd_dphy_hal.h new file mode 100644 index 0000000..b1d32be --- /dev/null +++ b/drivers/gpu/drm/sprd/dphy/sprd_dphy_hal.h @@ -0,0 +1,329 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include "sprd_dphy.h" + + +/* + * Reset D-PHY module + * @param dphy: pointer to structure + * which holds information about the d-dphy module + * @param reset + */ +static inline void dphy_hal_rstz(struct sprd_dphy *dphy, int level) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->rstz) + ppi->rstz(ctx, level); +} + +/* + * Power up/down D-PHY module + * @param dphy: pointer to structure + * which holds information about the d-dphy module + * @param enable (1: shutdown) + */ +static inline void dphy_hal_shutdownz(struct sprd_dphy *dphy, int level) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->shutdownz) + ppi->shutdownz(ctx, level); +} + +/* + * Force D-PHY PLL to stay on while in ULPS + * @param dphy: pointer to structure + * which holds information about the d-dphy module + * @param force (1) disable (0) + * @note To follow the programming model, use wakeup_pll function + */ +static inline void dphy_hal_force_pll(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->force_pll) + ppi->force_pll(ctx, en); +} + +static inline void dphy_hal_clklane_ulps_rqst(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->clklane_ulps_rqst) + ppi->clklane_ulps_rqst(ctx, en); +} + +static inline void dphy_hal_clklane_ulps_exit(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->clklane_ulps_exit) + ppi->clklane_ulps_exit(ctx, en); +} + +static inline void dphy_hal_datalane_ulps_rqst(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->datalane_ulps_rqst) + ppi->datalane_ulps_rqst(ctx, en); +} + +static inline void dphy_hal_datalane_ulps_exit(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->datalane_ulps_exit) + ppi->datalane_ulps_exit(ctx, en); +} + +/* + * Configure minimum wait period for HS transmission request after a stop state + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param no_of_byte_cycles [in byte (lane) clock cycles] + */ +static inline void dphy_hal_stop_wait_time(struct sprd_dphy *dphy, u8 cycles) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->stop_wait_time) + ppi->stop_wait_time(ctx, cycles); +} + +/* + * Set number of active lanes + * @param dphy: pointer to structure + * which holds information about the d-dphy module + * @param no_of_lanes + */ +static inline void dphy_hal_datalane_en(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->datalane_en) + ppi->datalane_en(ctx); +} + +/* + * Enable clock lane module + * @param dphy pointer to structure + * which holds information about the d-dphy module + * @param en + */ +static inline void dphy_hal_clklane_en(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->clklane_en) + ppi->clklane_en(ctx, en); +} + +/* + * Request the PHY module to start transmission of high speed clock. + * This causes the clock lane to start transmitting DDR clock on the + * lane interconnect. + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param enable + * @note this function should be called explicitly by user always except for + * transmitting + */ +static inline void dphy_hal_clk_hs_rqst(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->clk_hs_rqst) + ppi->clk_hs_rqst(ctx, en); +} + +/* + * Get D-PHY PPI status + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param mask + * @return status + */ +static inline u8 dphy_hal_is_pll_locked(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_pll_locked) + return 1; + + return ppi->is_pll_locked(ctx); +} + +static inline u8 dphy_hal_is_rx_direction(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_rx_direction) + return 0; + + return ppi->is_rx_direction(ctx); +} + +static inline u8 dphy_hal_is_rx_ulps_esc_lane0(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_rx_ulps_esc_lane0) + return 0; + + return ppi->is_rx_ulps_esc_lane0(ctx); +} + +static inline u8 dphy_hal_is_stop_state_clklane(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_stop_state_clklane) + return 1; + + return ppi->is_stop_state_clklane(ctx); +} + +static inline u8 dphy_hal_is_stop_state_datalane(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_stop_state_datalane) + return 1; + + return ppi->is_stop_state_datalane(ctx); +} + +static inline u8 dphy_hal_is_ulps_active_clklane(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_ulps_active_clklane) + return 1; + + return ppi->is_ulps_active_clklane(ctx); +} + +static inline u8 dphy_hal_is_ulps_active_datalane(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_ulps_active_datalane) + return 1; + + return ppi->is_ulps_active_datalane(ctx); +} + +/* + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param value + */ +static inline void dphy_hal_test_clk(struct sprd_dphy *dphy, u8 level) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->tst_clk) + ppi->tst_clk(ctx, level); +} + +/* + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param value + */ +static inline void dphy_hal_test_clr(struct sprd_dphy *dphy, u8 level) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->tst_clr) + ppi->tst_clr(ctx, level); +} + +/* + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param on_falling_edge + */ +static inline void dphy_hal_test_en(struct sprd_dphy *dphy, u8 level) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->tst_en) + ppi->tst_en(ctx, level); +} + +/* + * @param dphy pointer to structure which holds information about the d-dphy + * module + */ +static inline u8 dphy_hal_test_dout(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->tst_dout) + return ppi->tst_dout(ctx); + + return 0; +} + +/* + * @param dphy pointer to structure which holds information about the d-dphy + * module + * @param test_data + */ +static inline void dphy_hal_test_din(struct sprd_dphy *dphy, u8 data) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->tst_din) + ppi->tst_din(ctx, data); +} + +static inline void dphy_hal_bist_en(struct sprd_dphy *dphy, int en) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (ppi->bist_en) + ppi->bist_en(ctx, en); +} + +static inline u8 dphy_hal_is_bist_ok(struct sprd_dphy *dphy) +{ + struct dphy_ppi_ops *ppi = dphy->ppi; + struct dphy_context *ctx = &dphy->ctx; + + if (!ppi->is_bist_ok) + return 1; + + return ppi->is_bist_ok(ctx); +} + diff --git a/drivers/gpu/drm/sprd/dsi/Makefile b/drivers/gpu/drm/sprd/dsi/Makefile new file mode 100644 index 0000000..b7999b5 --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +subdir-ccflags-y += -I$(src) + +obj-y += sprd_dsi_api.o + +obj-y += core/ diff --git a/drivers/gpu/drm/sprd/dsi/core/Makefile b/drivers/gpu/drm/sprd/dsi/core/Makefile new file mode 100644 index 0000000..8a2957f --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/core/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += dsi_ctrl_r1p0.o dsi_ctrl_r1p0_ppi.o \ No newline at end of file diff --git a/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.c b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.c new file mode 100644 index 0000000..d56d156 --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.c @@ -0,0 +1,1169 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include +#include +#include + +#include "sprd_dsi.h" +#include "dsi_ctrl_r1p0.h" + +/* + * Get DSI Host core version + * @param instance pointer to structure holding the DSI Host core information + * @return ascii number of the version + */ +static bool dsi_check_version(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + u32 version = readl(®->DSI_VERSION); + + if (version == 0x100) + return true; + else if (version == 0x200) + return true; + else if (version == 0x300) + return true; + else + return false; +} +/* + * Modify power status of DSI Host core + * @param instance pointer to structure holding the DSI Host core information + * @param on (1) or off (0) + */ +static void dsi_power_enable(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(enable, ®->SOFT_RESET); +} +/* + * Enable/disable DPI video mode + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_video_mode(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(0, ®->DSI_MODE_CFG); +} +/* + * Enable command mode (Generic interface) + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_cmd_mode(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(1, ®->DSI_MODE_CFG); +} + +static bool dsi_is_cmd_mode(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + return readl(®->DSI_MODE_CFG); +} +/* + * Configure the read back virtual channel for the generic interface + * @param instance pointer to structure holding the DSI Host core information + * @param vc to listen to on the line + */ +static void dsi_rx_vcid(struct dsi_context *ctx, u8 vc) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x1C virtual_channel_id; + + virtual_channel_id.val = readl(®->VIRTUAL_CHANNEL_ID); + virtual_channel_id.bits.gen_rx_vcid = vc; + + writel(virtual_channel_id.val, ®->VIRTUAL_CHANNEL_ID); +} +/* + * Write the DPI video virtual channel destination + * @param instance pointer to structure holding the DSI Host core information + * @param vc virtual channel + */ +static void dsi_video_vcid(struct dsi_context *ctx, u8 vc) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x1C virtual_channel_id; + + virtual_channel_id.val = readl(®->VIRTUAL_CHANNEL_ID); + virtual_channel_id.bits.video_pkt_vcid = vc; + + writel(virtual_channel_id.val, ®->VIRTUAL_CHANNEL_ID); +} +/* + * Set DPI video mode type (burst/non-burst - with sync pulses or events) + * @param instance pointer to structure holding the DSI Host core information + * @param type + * @return error code + */ +static void dsi_dpi_video_burst_mode(struct dsi_context *ctx, int mode) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x38 vid_mode_cfg; + + vid_mode_cfg.val = readl(®->VID_MODE_CFG); + vid_mode_cfg.bits.vid_mode_type = mode; + + writel(vid_mode_cfg.val, ®->VID_MODE_CFG); +} +/* + * Set DPI video color coding + * @param instance pointer to structure holding the DSI Host core information + * @param color_coding enum (configuration and color depth) + * @return error code + */ +static void dsi_dpi_color_coding(struct dsi_context *ctx, int coding) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x20 dpi_video_format; + + dpi_video_format.val = readl(®->DPI_VIDEO_FORMAT); + dpi_video_format.bits.dpi_video_mode_format = coding; + + writel(dpi_video_format.val, ®->DPI_VIDEO_FORMAT); +} +/* + * Set DPI loosely packetisation video (used only when color depth = 18 + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_dpi_18_loosely_packet_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x20 dpi_video_format; + + dpi_video_format.val = readl(®->DPI_VIDEO_FORMAT); + dpi_video_format.bits.loosely18_en = enable; + + writel(dpi_video_format.val, ®->DPI_VIDEO_FORMAT); +} +/* + * Configure the Horizontal Line time + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle taken to transmit the total of the horizontal line + */ +static void dsi_dpi_hline_time(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x2C video_line_time; + + video_line_time.val = readl(®->VIDEO_LINE_TIME); + video_line_time.bits.video_line_time = byte_cycle; + + writel(video_line_time.val, ®->VIDEO_LINE_TIME); +} +/* + * Configure the Horizontal back porch time + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle taken to transmit the horizontal back porch + */ +static void dsi_dpi_hbp_time(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x28 video_line_hblk_time; + + video_line_hblk_time.val = readl(®->VIDEO_LINE_HBLK_TIME); + video_line_hblk_time.bits.video_line_hbp_time = byte_cycle; + + writel(video_line_hblk_time.val, ®->VIDEO_LINE_HBLK_TIME); +} +/* + * Configure the Horizontal sync time + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle taken to transmit the horizontal sync + */ +static void dsi_dpi_hsync_time(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x28 video_line_hblk_time; + + video_line_hblk_time.val = readl(®->VIDEO_LINE_HBLK_TIME); + video_line_hblk_time.bits.video_line_hsa_time = byte_cycle; + + writel(video_line_hblk_time.val, ®->VIDEO_LINE_HBLK_TIME); +} +/* + * Configure the vertical active lines of the video stream + * @param instance pointer to structure holding the DSI Host core information + * @param lines + */ +static void dsi_dpi_vact(struct dsi_context *ctx, u16 lines) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x34 video_active_lines; + + video_active_lines.val = readl(®->VIDEO_VACTIVE_LINES); + video_active_lines.bits.vactive_lines = lines; + + writel(video_active_lines.val, ®->VIDEO_VACTIVE_LINES); +} +/* + * Configure the vertical front porch lines of the video stream + * @param instance pointer to structure holding the DSI Host core information + * @param lines + */ +static void dsi_dpi_vfp(struct dsi_context *ctx, u16 lines) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x30 video_vblk_lines; + + video_vblk_lines.val = readl(®->VIDEO_VBLK_LINES); + video_vblk_lines.bits.vfp_lines = lines; + + writel(video_vblk_lines.val, ®->VIDEO_VBLK_LINES); +} +/* + * Configure the vertical back porch lines of the video stream + * @param instance pointer to structure holding the DSI Host core information + * @param lines + */ +static void dsi_dpi_vbp(struct dsi_context *ctx, u16 lines) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x30 video_vblk_lines; + + video_vblk_lines.val = readl(®->VIDEO_VBLK_LINES); + video_vblk_lines.bits.vbp_lines = lines; + + writel(video_vblk_lines.val, ®->VIDEO_VBLK_LINES); +} +/* + * Configure the vertical sync lines of the video stream + * @param instance pointer to structure holding the DSI Host core information + * @param lines + */ +static void dsi_dpi_vsync(struct dsi_context *ctx, u16 lines) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x30 video_vblk_lines; + + video_vblk_lines.val = readl(®->VIDEO_VBLK_LINES); + video_vblk_lines.bits.vsa_lines = lines; + + writel(video_vblk_lines.val, ®->VIDEO_VBLK_LINES); +} +/* + * Enable return to low power mode inside horizontal front porch periods when + * timing allows + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_dpi_hporch_lp_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x38 vid_mode_cfg; + + vid_mode_cfg.val = readl(®->VID_MODE_CFG); + + vid_mode_cfg.bits.lp_hfp_en = enable; + vid_mode_cfg.bits.lp_hbp_en = enable; + + writel(vid_mode_cfg.val, ®->VID_MODE_CFG); +} +/* + * Enable return to low power mode inside vertical active lines periods when + * timing allows + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_dpi_vporch_lp_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x38 vid_mode_cfg; + + vid_mode_cfg.val = readl(®->VID_MODE_CFG); + + vid_mode_cfg.bits.lp_vact_en = enable; + vid_mode_cfg.bits.lp_vfp_en = enable; + vid_mode_cfg.bits.lp_vbp_en = enable; + vid_mode_cfg.bits.lp_vsa_en = enable; + + writel(vid_mode_cfg.val, ®->VID_MODE_CFG); +} +/* + * Enable FRAME BTA ACK + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_dpi_frame_ack_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x38 vid_mode_cfg; + + vid_mode_cfg.val = readl(®->VID_MODE_CFG); + vid_mode_cfg.bits.frame_bta_ack_en = enable; + + writel(vid_mode_cfg.val, ®->VID_MODE_CFG); +} +/* + * Write no of chunks to core - taken into consideration only when multi packet + * is enabled + * @param instance pointer to structure holding the DSI Host core information + * @param no of chunks + */ +static void dsi_dpi_chunk_num(struct dsi_context *ctx, u16 num) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x24 video_pkt_config; + + video_pkt_config.val = readl(®->VIDEO_PKT_CONFIG); + video_pkt_config.bits.video_line_chunk_num = num; + + writel(video_pkt_config.val, ®->VIDEO_PKT_CONFIG); +} +/* + * Write the null packet size - will only be taken into account when null + * packets are enabled. + * @param instance pointer to structure holding the DSI Host core information + * @param size of null packet + * @return error code + */ +static void dsi_dpi_null_packet_size(struct dsi_context *ctx, u16 size) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xC0 video_nullpkt_size; + + video_nullpkt_size.val = readl(®->VIDEO_NULLPKT_SIZE); + video_nullpkt_size.bits.video_nullpkt_size = size; + + writel(video_nullpkt_size.val, ®->VIDEO_NULLPKT_SIZE); +} +/* + * Write video packet size. obligatory for sending video + * @param instance pointer to structure holding the DSI Host core information + * @param size of video packet - containing information + * @return error code + */ +static void dsi_dpi_video_packet_size(struct dsi_context *ctx, u16 size) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x24 video_pkt_config; + + video_pkt_config.val = readl(®->VIDEO_PKT_CONFIG); + video_pkt_config.bits.video_pkt_size = size; + + writel(video_pkt_config.val, ®->VIDEO_PKT_CONFIG); +} +/* + * Specifiy the size of the packet memory write start/continue + * @param instance pointer to structure holding the DSI Host core information + * @ size of the packet + * @note when different than zero (0) eDPI is enabled + */ +static void dsi_edpi_max_pkt_size(struct dsi_context *ctx, u16 size) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xC4 dcs_wm_pkt_size; + + dcs_wm_pkt_size.val = readl(®->DCS_WM_PKT_SIZE); + dcs_wm_pkt_size.bits.dcs_wm_pkt_size = size; + + writel(dcs_wm_pkt_size.val, ®->DCS_WM_PKT_SIZE); +} +/* + * Enable tear effect acknowledge + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_tear_effect_ack_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x68 cmd_mode_cfg; + + cmd_mode_cfg.val = readl(®->CMD_MODE_CFG); + cmd_mode_cfg.bits.tear_fx_en = enable; + + writel(cmd_mode_cfg.val, ®->CMD_MODE_CFG); +} +/* + * Enable packets acknowledge request after each packet transmission + * @param instance pointer to structure holding the DSI Host core information + * @param enable (1) - disable (0) + */ +static void dsi_cmd_ack_request_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x68 cmd_mode_cfg; + + cmd_mode_cfg.val = readl(®->CMD_MODE_CFG); + cmd_mode_cfg.bits.ack_rqst_en = enable; + + writel(cmd_mode_cfg.val, ®->CMD_MODE_CFG); +} +/* + * Set DCS command packet transmission to transmission type + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_param of command + * @param lp transmit in low power + * @return error code + */ +static void dsi_cmd_mode_lp_cmd_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x68 cmd_mode_cfg; + + cmd_mode_cfg.val = readl(®->CMD_MODE_CFG); + + cmd_mode_cfg.bits.gen_sw_0p_tx = enable; + cmd_mode_cfg.bits.gen_sw_1p_tx = enable; + cmd_mode_cfg.bits.gen_sw_2p_tx = enable; + cmd_mode_cfg.bits.gen_lw_tx = enable; + cmd_mode_cfg.bits.dcs_sw_0p_tx = enable; + cmd_mode_cfg.bits.dcs_sw_1p_tx = enable; + cmd_mode_cfg.bits.dcs_lw_tx = enable; + cmd_mode_cfg.bits.max_rd_pkt_size = enable; + + cmd_mode_cfg.bits.gen_sr_0p_tx = enable; + cmd_mode_cfg.bits.gen_sr_1p_tx = enable; + cmd_mode_cfg.bits.gen_sr_2p_tx = enable; + cmd_mode_cfg.bits.dcs_sr_0p_tx = enable; + + writel(cmd_mode_cfg.val, ®->CMD_MODE_CFG); +} +/* + * Set DCS read command packet transmission to transmission type + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_param of command + * @param lp transmit in low power + * @return error code + */ +static void dsi_video_mode_lp_cmd_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x38 vid_mode_cfg; + + vid_mode_cfg.val = readl(®->VID_MODE_CFG); + vid_mode_cfg.bits.lp_cmd_en = enable; + + writel(vid_mode_cfg.val, ®->VID_MODE_CFG); +} + +/* + * Write command header in the generic interface + * (which also sends DCS commands) as a subset + * @param instance pointer to structure holding the DSI Host core information + * @param vc of destination + * @param packet_type (or type of DCS command) + * @param ls_byte (if DCS, it is the DCS command) + * @param ms_byte (only parameter of short DCS packet) + * @return error code + */ +static void dsi_set_packet_header(struct dsi_context *ctx, + u8 vc, + u8 type, + u8 wc_lsb, + u8 wc_msb) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x6C gen_hdr; + + gen_hdr.bits.gen_dt = type; + gen_hdr.bits.gen_vc = vc; + gen_hdr.bits.gen_wc_lsbyte = wc_lsb; + gen_hdr.bits.gen_wc_msbyte = wc_msb; + + writel(gen_hdr.val, ®->GEN_HDR); +} +/* + * Write the payload of the long packet commands + * @param instance pointer to structure holding the DSI Host core information + * @param payload array of bytes of payload + * @return error code + */ +static void dsi_set_packet_payload(struct dsi_context *ctx, u32 payload) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(payload, ®->GEN_PLD_DATA); +} +/* + * Write the payload of the long packet commands + * @param instance pointer to structure holding the DSI Host core information + * @param payload pointer to 32-bit array to hold read information + * @return error code + */ +static u32 dsi_get_rx_payload(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + return readl(®->GEN_PLD_DATA); +} + +/* + * Enable Bus Turn-around request + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_bta_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(enable, ®->TA_EN); +} +/* + * Enable EOTp reception + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_eotp_rx_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xBC eotp_en; + + eotp_en.val = readl(®->EOTP_EN); + eotp_en.bits.rx_eotp_en = enable; + + writel(eotp_en.val, ®->EOTP_EN); +} +/* + * Enable EOTp transmission + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_eotp_tx_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xBC eotp_en; + + eotp_en.val = readl(®->EOTP_EN); + eotp_en.bits.tx_eotp_en = enable; + + writel(eotp_en.val, ®->EOTP_EN); +} +/* + * Enable ECC reception, error correction and reporting + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_ecc_rx_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xB4 rx_pkt_check_config; + + rx_pkt_check_config.val = readl(®->RX_PKT_CHECK_CONFIG); + rx_pkt_check_config.bits.rx_pkt_ecc_en = enable; + + writel(rx_pkt_check_config.val, ®->RX_PKT_CHECK_CONFIG); +} +/* + * Enable CRC reception, error reporting + * @param instance pointer to structure holding the DSI Host core information + * @param enable + */ +static void dsi_crc_rx_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xB4 rx_pkt_check_config; + + rx_pkt_check_config.val = readl(®->RX_PKT_CHECK_CONFIG); + rx_pkt_check_config.bits.rx_pkt_crc_en = enable; + + writel(rx_pkt_check_config.val, ®->RX_PKT_CHECK_CONFIG); +} +/* + * NOTE: dsi-ctrl-r1p0 only + * + * Get status of read command + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if busy + */ +static bool dsi_is_rdcmd_done(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_rdcmd_done; +} +/* + * Get the FULL status of generic read payload fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static bool dsi_is_rx_payload_fifo_full(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_rdata_fifo_full; +} +/* + * Get the EMPTY status of generic read payload fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static bool dsi_is_rx_payload_fifo_empty(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_rdata_fifo_empty; +} +/* + * Get the FULL status of generic write payload fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static bool dsi_is_tx_payload_fifo_full(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_wdata_fifo_full; +} +/* + * Get the EMPTY status of generic write payload fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static bool dsi_is_tx_payload_fifo_empty(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_wdata_fifo_empty; +} +/* + * Get the FULL status of generic command fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static bool dsi_is_tx_cmd_fifo_full(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_cmd_fifo_full; +} +/* + * Get the EMPTY status of generic command fifo + * @param instance pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static bool dsi_is_tx_cmd_fifo_empty(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x98 cmd_mode_status; + + cmd_mode_status.val = readl(®->CMD_MODE_STATUS); + + return cmd_mode_status.bits.gen_cmd_cmd_fifo_empty; +} + +/* only if DPI */ +/* + * DPI interface signal delay config + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle period for waiting after controller receiving HSYNC from + * DPI interface to start read pixel data from memory. + */ +static void dsi_dpi_sig_delay(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xD0 video_sig_delay_config; + + video_sig_delay_config.val = readl(®->VIDEO_SIG_DELAY_CONFIG); + video_sig_delay_config.bits.video_sig_delay = byte_cycle; + + writel(video_sig_delay_config.val, ®->VIDEO_SIG_DELAY_CONFIG); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch data lane from high speed to low power + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle + * @return error code + */ +static void dsi_datalane_hs2lp_config(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xAC phy_datalane_time_config; + + phy_datalane_time_config.val = readl(®->PHY_DATALANE_TIME_CONFIG); + phy_datalane_time_config.bits.phy_datalane_hs_to_lp_time = byte_cycle; + + writel(phy_datalane_time_config.val, ®->PHY_DATALANE_TIME_CONFIG); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch the data lane from to low power high speed + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle + * @return error code + */ +static void dsi_datalane_lp2hs_config(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xAC phy_datalane_time_config; + + phy_datalane_time_config.val = readl(®->PHY_DATALANE_TIME_CONFIG); + phy_datalane_time_config.bits.phy_datalane_lp_to_hs_time = byte_cycle; + + writel(phy_datalane_time_config.val, ®->PHY_DATALANE_TIME_CONFIG); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch clock lane from high speed to low power + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle + * @return error code + */ +static void dsi_clklane_hs2lp_config(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xA8 phy_clklane_time_config; + + phy_clklane_time_config.val = readl(®->PHY_CLKLANE_TIME_CONFIG); + phy_clklane_time_config.bits.phy_clklane_hs_to_lp_time = byte_cycle; + + writel(phy_clklane_time_config.val, ®->PHY_CLKLANE_TIME_CONFIG); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch clock lane from to low power high speed + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle + * @return error code + */ +static void dsi_clklane_lp2hs_config(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0xA8 phy_clklane_time_config; + + phy_clklane_time_config.val = readl(®->PHY_CLKLANE_TIME_CONFIG); + phy_clklane_time_config.bits.phy_clklane_lp_to_hs_time = byte_cycle; + + writel(phy_clklane_time_config.val, ®->PHY_CLKLANE_TIME_CONFIG); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to turn the bus around to start receiving + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle + * @return error code + */ +static void dsi_max_read_time(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(byte_cycle, ®->MAX_READ_TIME); +} +/* + * Enable the automatic mechanism to stop providing clock in the clock + * lane when time allows + * @param instance pointer to structure holding the DSI Host core information + * @param enable + * @return error code + */ +static void dsi_nc_clk_en(struct dsi_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x74 phy_clk_lane_lp_ctrl; + + phy_clk_lane_lp_ctrl.val = readl(®->PHY_CLK_LANE_LP_CTRL); + phy_clk_lane_lp_ctrl.bits.auto_clklane_ctrl_en = enable; + + writel(phy_clk_lane_lp_ctrl.val, ®->PHY_CLK_LANE_LP_CTRL); +} +/* + * Write transmission escape timeout + * a safe guard so that the state machine would reset if transmission + * takes too long + * @param instance pointer to structure holding the DSI Host core information + * @param div + */ +static void dsi_tx_escape_division(struct dsi_context *ctx, u8 div) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(div, ®->TX_ESC_CLK_CONFIG); +} +/* PRESP Time outs */ +/* + * configure timeout divisions (so they would have more clock ticks) + * @param instance pointer to structure holding the DSI Host core information + * @param div no of hs cycles before transiting back to LP in + * (lane_clk / div) + */ +static void dsi_timeout_clock_division(struct dsi_context *ctx, u8 div) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(div, ®->TIMEOUT_CNT_CLK_CONFIG); +} +/* + * Configure the Low power receive time out + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle (of byte cycles) + */ +static void dsi_lp_rx_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(byte_cycle, ®->LRX_H_TO_CONFIG); +} +/* + * Configure a high speed transmission time out + * @param instance pointer to structure holding the DSI Host core information + * @param byte_cycle (byte cycles) + */ +static void dsi_hs_tx_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(byte_cycle, ®->HTX_TO_CONFIG); +} +/* + * Timeout for peripheral (for controller to stay still) after bus turn around + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_byte_cycles period for which the DWC_mipi_dsi_host keeps the + * link still, after sending a BTA operation. This period is + * measured in cycles of lanebyteclk + */ +static void dsi_bta_presp_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(byte_cycle, ®->BTA_PRESP_TO_CONFIG); +} +/* + * Timeout for peripheral (for controller to stay still) after LP data + * transmission write requests + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_byte_cycles period for which the DWC_mipi_dsi_host keeps the + * link still, after sending a low power write operation. This period is + * measured in cycles of lanebyteclk + */ +static void dsi_lp_write_presp_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(byte_cycle, ®->LPWR_PRESP_TO_CONFIG); +} +/* + * Timeout for peripheral (for controller to stay still) after LP data + * transmission read requests + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_byte_cycles period for which the DWC_mipi_dsi_host keeps the + * link still, after sending a low power read operation. This period is + * measured in cycles of lanebyteclk + */ +static void dsi_lp_read_presp_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x4C rd_presp_to_config; + + rd_presp_to_config.val = readl(®->RD_PRESP_TO_CONFIG); + rd_presp_to_config.bits.lprd_presp_to_cnt_limit = byte_cycle; + + writel(rd_presp_to_config.val, ®->RD_PRESP_TO_CONFIG); +} +/* + * Timeout for peripheral (for controller to stay still) after HS data + * transmission write requests + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_byte_cycles period for which the DWC_mipi_dsi_host keeps the + * link still, after sending a high-speed write operation. This period is + * measured in cycles of lanebyteclk + */ +static void dsi_hs_write_presp_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x50 hswr_presp_to_config; + + hswr_presp_to_config.val = readl(®->HSWR_PRESP_TO_CONFIG); + hswr_presp_to_config.bits.hswr_presp_to_cnt_limit = byte_cycle; + + writel(hswr_presp_to_config.val, ®->HSWR_PRESP_TO_CONFIG); +} +/* + * Timeout for peripheral between HS data transmission read requests + * @param instance pointer to structure holding the DSI Host core information + * @param no_of_byte_cycles period for which the DWC_mipi_dsi_host keeps the + * link still, after sending a high-speed read operation. This period is + * measured in cycles of lanebyteclk + */ +static void dsi_hs_read_presp_timeout(struct dsi_context *ctx, u16 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x4C rd_presp_to_config; + + rd_presp_to_config.val = readl(®->RD_PRESP_TO_CONFIG); + rd_presp_to_config.bits.hsrd_presp_to_cnt_limit = byte_cycle; + + writel(rd_presp_to_config.val, ®->RD_PRESP_TO_CONFIG); +} +/* + * Get the error 0 interrupt register status + * @param instance pointer to structure holding the DSI Host core information + * @param mask the mask to be read from the register + * @return error status 0 value + */ +static u32 dsi_int0_status(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x08 protocol_int_sts; + + protocol_int_sts.val = readl(®->PROTOCOL_INT_STS); + writel(protocol_int_sts.val, ®->PROTOCOL_INT_CLR); + + if (protocol_int_sts.bits.dphy_errors_0) + pr_err("dphy_err: escape entry error\n"); + + if (protocol_int_sts.bits.dphy_errors_1) + pr_err("dphy_err: lp data transmission sync error\n"); + + if (protocol_int_sts.bits.dphy_errors_2) + pr_err("dphy_err: control error\n"); + + if (protocol_int_sts.bits.dphy_errors_3) + pr_err("dphy_err: LP0 contention error\n"); + + if (protocol_int_sts.bits.dphy_errors_4) + pr_err("dphy_err: LP1 contention error\n"); + + if (protocol_int_sts.bits.ack_with_err_0) + pr_err("ack_err: SoT error\n"); + + if (protocol_int_sts.bits.ack_with_err_1) + pr_err("ack_err: SoT Sync error\n"); + + if (protocol_int_sts.bits.ack_with_err_2) + pr_err("ack_err: EoT Sync error\n"); + + if (protocol_int_sts.bits.ack_with_err_3) + pr_err("ack_err: Escape Mode Entry Command error\n"); + + if (protocol_int_sts.bits.ack_with_err_4) + pr_err("ack_err: LP Transmit Sync error\n"); + + if (protocol_int_sts.bits.ack_with_err_5) + pr_err("ack_err: Peripheral Timeout error\n"); + + if (protocol_int_sts.bits.ack_with_err_6) + pr_err("ack_err: False Control error\n"); + + if (protocol_int_sts.bits.ack_with_err_7) + pr_err("ack_err: reserved (specific to device)\n"); + + if (protocol_int_sts.bits.ack_with_err_8) + pr_err("ack_err: ECC error, single-bit (corrected)\n"); + + if (protocol_int_sts.bits.ack_with_err_9) + pr_err("ack_err: ECC error, multi-bit (not corrected)\n"); + + if (protocol_int_sts.bits.ack_with_err_10) + pr_err("ack_err: checksum error (long packet only)\n"); + + if (protocol_int_sts.bits.ack_with_err_11) + pr_err("ack_err: not recognized DSI data type\n"); + + if (protocol_int_sts.bits.ack_with_err_12) + pr_err("ack_err: DSI VC ID Invalid\n"); + + if (protocol_int_sts.bits.ack_with_err_13) + pr_err("ack_err: invalid transmission length\n"); + + if (protocol_int_sts.bits.ack_with_err_14) + pr_err("ack_err: reserved (specific to device)\n"); + + if (protocol_int_sts.bits.ack_with_err_15) + pr_err("ack_err: DSI protocol violation\n"); + + return 0; +} +/* + * Get the error 1 interrupt register status + * @param instance pointer to structure holding the DSI Host core information + * @param mask the mask to be read from the register + * @return error status 1 value + */ +static u32 dsi_int1_status(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + union _0x10 internal_int_sts; + u32 status = 0; + + internal_int_sts.val = readl(®->INTERNAL_INT_STS); + writel(internal_int_sts.val, ®->INTERNAL_INT_CLR); + + if (internal_int_sts.bits.receive_pkt_size_err) + pr_err("receive packet size error\n"); + + if (internal_int_sts.bits.eotp_not_receive_err) + pr_err("EoTp packet is not received\n"); + + if (internal_int_sts.bits.gen_cmd_cmd_fifo_wr_err) + pr_err("cmd header-fifo is full\n"); + + if (internal_int_sts.bits.gen_cmd_rdata_fifo_rd_err) + pr_err("cmd read-payload-fifo is empty\n"); + + if (internal_int_sts.bits.gen_cmd_rdata_fifo_wr_err) + pr_err("cmd read-payload-fifo is full\n"); + + if (internal_int_sts.bits.gen_cmd_wdata_fifo_wr_err) + pr_err("cmd write-payload-fifo is full\n"); + + if (internal_int_sts.bits.gen_cmd_wdata_fifo_rd_err) + pr_err("cmd write-payload-fifo is empty\n"); + + if (internal_int_sts.bits.dpi_pix_fifo_wr_err) { + pr_err("DPI pixel-fifo is full\n"); + status |= DSI_INT_STS_NEED_SOFT_RESET; + } + + if (internal_int_sts.bits.ecc_single_err) + pr_err("ECC single error in a received packet\n"); + + if (internal_int_sts.bits.ecc_multi_err) + pr_err("ECC multiple error in a received packet\n"); + + if (internal_int_sts.bits.crc_err) + pr_err("CRC error in the received packet payload\n"); + + if (internal_int_sts.bits.hs_tx_timeout) + pr_err("high-speed transmission timeout\n"); + + if (internal_int_sts.bits.lp_rx_timeout) + pr_err("low-power reception timeout\n"); + + return status; +} +/* + * Get the error 1 interrupt register status + * @param instance pointer to structure holding the DSI Host core information + * @param mask the mask to be read from the register + * @return error status 1 value + */ +static u32 dsi_int2_status(struct dsi_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + if (readl(®->INT_PLL_STS)) + pr_err("pll interrupt\n"); + + return 0; +} +/* + * Configure MASK (hiding) of interrupts coming from error 0 source + * @param instance pointer to structure holding the DSI Host core information + * @param mask to be written to the register + */ +static void dsi_int0_mask(struct dsi_context *ctx, u32 mask) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(mask, ®->MASK_PROTOCOL_INT); +} +/* + * Configure MASK (hiding) of interrupts coming from error 1 source + * @param instance pointer to structure holding the DSI Host core information + * @param mask the mask to be written to the register + */ +static void dsi_int1_mask(struct dsi_context *ctx, u32 mask) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(mask, ®->MASK_INTERNAL_INT); +} +/* + * Configure MASK (hiding) of interrupts coming from error 2 source + * @param instance pointer to structure holding the DSI Host core information + * @param mask the mask to be written to the register + */ +static void dsi_int2_mask(struct dsi_context *ctx, u32 mask) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->base; + + writel(mask, ®->INT_PLL_MSK); +} + +struct dsi_core_ops dsi_ctrl_r1p0_ops = { + .check_version = dsi_check_version, + .power_en = dsi_power_enable, + .video_mode = dsi_video_mode, + .cmd_mode = dsi_cmd_mode, + .is_cmd_mode = dsi_is_cmd_mode, + .rx_vcid = dsi_rx_vcid, + .video_vcid = dsi_video_vcid, + .dpi_video_burst_mode = dsi_dpi_video_burst_mode, + .dpi_color_coding = dsi_dpi_color_coding, + .dpi_18_loosely_packet_en = dsi_dpi_18_loosely_packet_en, + .dpi_sig_delay = dsi_dpi_sig_delay, + .dpi_hline_time = dsi_dpi_hline_time, + .dpi_hsync_time = dsi_dpi_hsync_time, + .dpi_hbp_time = dsi_dpi_hbp_time, + .dpi_vact = dsi_dpi_vact, + .dpi_vfp = dsi_dpi_vfp, + .dpi_vbp = dsi_dpi_vbp, + .dpi_vsync = dsi_dpi_vsync, + .dpi_hporch_lp_en = dsi_dpi_hporch_lp_en, + .dpi_vporch_lp_en = dsi_dpi_vporch_lp_en, + .dpi_frame_ack_en = dsi_dpi_frame_ack_en, + .dpi_chunk_num = dsi_dpi_chunk_num, + .dpi_null_packet_size = dsi_dpi_null_packet_size, + .dpi_video_packet_size = dsi_dpi_video_packet_size, + .edpi_max_pkt_size = dsi_edpi_max_pkt_size, + .tear_effect_ack_en = dsi_tear_effect_ack_en, + .cmd_ack_request_en = dsi_cmd_ack_request_en, + .cmd_mode_lp_cmd_en = dsi_cmd_mode_lp_cmd_en, + .video_mode_lp_cmd_en = dsi_video_mode_lp_cmd_en, + .set_packet_header = dsi_set_packet_header, + .set_packet_payload = dsi_set_packet_payload, + .get_rx_payload = dsi_get_rx_payload, + .bta_en = dsi_bta_en, + .eotp_rx_en = dsi_eotp_rx_en, + .eotp_tx_en = dsi_eotp_tx_en, + .ecc_rx_en = dsi_ecc_rx_en, + .crc_rx_en = dsi_crc_rx_en, + .is_bta_returned = dsi_is_rdcmd_done, + .is_rx_payload_fifo_full = dsi_is_rx_payload_fifo_full, + .is_rx_payload_fifo_empty = dsi_is_rx_payload_fifo_empty, + .is_tx_payload_fifo_full = dsi_is_tx_payload_fifo_full, + .is_tx_payload_fifo_empty = dsi_is_tx_payload_fifo_empty, + .is_tx_cmd_fifo_full = dsi_is_tx_cmd_fifo_full, + .is_tx_cmd_fifo_empty = dsi_is_tx_cmd_fifo_empty, + .datalane_hs2lp_config = dsi_datalane_hs2lp_config, + .datalane_lp2hs_config = dsi_datalane_lp2hs_config, + .clklane_hs2lp_config = dsi_clklane_hs2lp_config, + .clklane_lp2hs_config = dsi_clklane_lp2hs_config, + .max_read_time = dsi_max_read_time, + .nc_clk_en = dsi_nc_clk_en, + .tx_escape_division = dsi_tx_escape_division, + .timeout_clock_division = dsi_timeout_clock_division, + .lp_rx_timeout = dsi_lp_rx_timeout, + .hs_tx_timeout = dsi_hs_tx_timeout, + .bta_presp_timeout = dsi_bta_presp_timeout, + .lp_write_presp_timeout = dsi_lp_write_presp_timeout, + .lp_read_presp_timeout = dsi_lp_read_presp_timeout, + .hs_write_presp_timeout = dsi_hs_write_presp_timeout, + .hs_read_presp_timeout = dsi_hs_read_presp_timeout, + .int0_status = dsi_int0_status, + .int1_status = dsi_int1_status, + .int2_status = dsi_int2_status, + .int0_mask = dsi_int0_mask, + .int1_mask = dsi_int1_mask, + .int2_mask = dsi_int2_mask, +}; diff --git a/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.h b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.h new file mode 100644 index 0000000..ede010b --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0.h @@ -0,0 +1,1417 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#ifndef _MIPI_DSI_R1P0_H_ +#define _MIPI_DSI_R1P0_H_ + +#include + +struct dsi_reg { + union _0x00 { + u32 val; + struct _DSI_VERSION { + u32 dsi_version: 16; + u32 reserved: 16; + } bits; + } DSI_VERSION; + + union _0x04 { + u32 val; + struct _SOFT_RESET { + /* + * This bit configures the core either to work normal or to + * reset. It's default value is 0. After the core configur- + * ation, to enable the mipi_dsi_host, set this register to 1. + * 1: power up 0: reset core + */ + u32 dsi_soft_reset: 1; + + u32 reserved: 31; + } bits; + } SOFT_RESET; + + union _0x08 { + u32 val; + struct _PROTOCOL_INT_STS { + /* ErrEsc escape entry error from Lane 0 */ + u32 dphy_errors_0: 1; + + /* ErrSyncEsc low-power data transmission synchronization + * error from Lane 0 + */ + u32 dphy_errors_1: 1; + + /* ErrControl error from Lane 0 */ + u32 dphy_errors_2: 1; + + /* ErrContentionLP0 LP0 contention error from Lane 0 */ + u32 dphy_errors_3: 1; + + /* ErrContentionLP1 LP1 contention error from Lane 0 */ + u32 dphy_errors_4: 1; + + /* debug mode protocol errors */ + u32 protocol_debug_err: 11; + + /* SoT error from the Acknowledge error report */ + u32 ack_with_err_0: 1; + + /* SoT Sync error from the Acknowledge error report */ + u32 ack_with_err_1: 1; + + /* EoT Sync error from the Acknowledge error report */ + u32 ack_with_err_2: 1; + + /* Escape Mode Entry Command error from the Acknowledge + * error report + */ + u32 ack_with_err_3: 1; + + /* LP Transmit Sync error from the Acknowledge error report */ + u32 ack_with_err_4: 1; + + /* Peripheral Timeout error from the Acknowledge error report */ + u32 ack_with_err_5: 1; + + /* False Control error from the Acknowledge error report */ + u32 ack_with_err_6: 1; + + /* reserved (specific to device) from the Acknowledge error + * report + */ + u32 ack_with_err_7: 1; + + /* ECC error, single-bit (detected and corrected) from the + * Acknowledge error report + */ + u32 ack_with_err_8: 1; + + /* ECC error, multi-bit (detected, not corrected) from the + * Acknowledge error report + */ + u32 ack_with_err_9: 1; + + /* checksum error (long packet only) from the Acknowledge + * error report + */ + u32 ack_with_err_10: 1; + + /* not recognized DSI data type from the Acknowledge error + * report + */ + u32 ack_with_err_11: 1; + + /* DSI VC ID Invalid from the Acknowledge error report */ + u32 ack_with_err_12: 1; + + /* invalid transmission length from the Acknowledge error + * report + */ + u32 ack_with_err_13: 1; + + /* reserved (specific to device) from the Acknowledge error + * report + */ + u32 ack_with_err_14: 1; + + /* DSI protocol violation from the Acknowledge error report */ + u32 ack_with_err_15: 1; + + } bits; + } PROTOCOL_INT_STS; + + union _0x0C { + u32 val; + struct _MASK_PROTOCOL_INT { + u32 mask_dphy_errors_0: 1; + u32 mask_dphy_errors_1: 1; + u32 mask_dphy_errors_2: 1; + u32 mask_dphy_errors_3: 1; + u32 mask_dphy_errors_4: 1; + u32 mask_protocol_debug_err: 11; + u32 mask_ack_with_err_0: 1; + u32 mask_ack_with_err_1: 1; + u32 mask_ack_with_err_2: 1; + u32 mask_ack_with_err_3: 1; + u32 mask_ack_with_err_4: 1; + u32 mask_ack_with_err_5: 1; + u32 mask_ack_with_err_6: 1; + u32 mask_ack_with_err_7: 1; + u32 mask_ack_with_err_8: 1; + u32 mask_ack_with_err_9: 1; + u32 mask_ack_with_err_10: 1; + u32 mask_ack_with_err_11: 1; + u32 mask_ack_with_err_12: 1; + u32 mask_ack_with_err_13: 1; + u32 mask_ack_with_err_14: 1; + u32 mask_ack_with_err_15: 1; + } bits; + } MASK_PROTOCOL_INT; + + union _0x10 { + u32 val; + struct _INTERNAL_INT_STS { + /* This bit indicates that the packet size error is detected + * during the packet reception. + */ + u32 receive_pkt_size_err: 1; + + /* This bit indicates that the EoTp packet is not received at + * the end of the incoming peripheral transmission + */ + u32 eotp_not_receive_err: 1; + + /* This bit indicates that the system tried to write a command + * through the Generic interface and the FIFO is full. There- + * fore, the command is not written. + */ + u32 gen_cmd_cmd_fifo_wr_err: 1; + + /* This bit indicates that during a DCS read data, the payload + * FIFO becomes empty and the data sent to the interface is + * corrupted. + */ + u32 gen_cmd_rdata_fifo_rd_err: 1; + + /* This bit indicates that during a generic interface packet + * read back, the payload FIFO becomes full and the received + * data is corrupted. + */ + u32 gen_cmd_rdata_fifo_wr_err: 1; + + /* This bit indicates that the system tried to write a payload + * data through the Generic interface and the FIFO is full. + * Therefore, the payload is not written. + */ + u32 gen_cmd_wdata_fifo_wr_err: 1; + + /* This bit indicates that during a Generic interface packet + * build, the payload FIFO becomes empty and corrupt data is + * sent. + */ + u32 gen_cmd_wdata_fifo_rd_err: 1; + + /* This bit indicates that during a DPI pixel line storage, + * the payload FIFO becomes full and the data stored is + * corrupted. + */ + u32 dpi_pix_fifo_wr_err: 1; + + /* internal debug error */ + u32 internal_debug_err: 19; + + /* This bit indicates that the ECC single error is detected + * and corrected in a received packet. + */ + u32 ecc_single_err: 1; + + /* This bit indicates that the ECC multiple error is detected + * in a received packet. + */ + u32 ecc_multi_err: 1; + + /* This bit indicates that the CRC error is detected in the + * received packet payload. + */ + u32 crc_err: 1; + + /* This bit indicates that the high-speed transmission timeout + * counter reached the end and contention is detected. + */ + u32 hs_tx_timeout: 1; + + /* This bit indicates that the low-power reception timeout + * counter reached the end and contention is detected. + */ + u32 lp_rx_timeout: 1; + + } bits; + } INTERNAL_INT_STS; + + union _0x14 { + u32 val; + struct _MASK_INTERNAL_INT { + u32 mask_receive_pkt_size_err: 1; + u32 mask_eopt_not_receive_err: 1; + u32 mask_gen_cmd_cmd_fifo_wr_err: 1; + u32 mask_gen_cmd_rdata_fifo_rd_err: 1; + u32 mask_gen_cmd_rdata_fifo_wr_err: 1; + u32 mask_gen_cmd_wdata_fifo_wr_err: 1; + u32 mask_gen_cmd_wdata_fifo_rd_err: 1; + u32 mask_dpi_pix_fifo_wr_err: 1; + u32 mask_internal_debug_err: 19; + u32 mask_ecc_single_err: 1; + u32 mask_ecc_multi_err: 1; + u32 mask_crc_err: 1; + u32 mask_hs_tx_timeout: 1; + u32 mask_lp_rx_timeout: 1; + } bits; + } MASK_INTERNAL_INT; + + union _0x18 { + u32 val; + struct _DSI_MODE_CFG { + /* This bit configures the operation mode + * 0: Video mode ; 1: Command mode + */ + u32 cmd_video_mode: 1; + + u32 reserved: 31; + + } bits; + } DSI_MODE_CFG; + + union _0x1C { + u32 val; + struct _VIRTUAL_CHANNEL_ID { + /* This field indicates the Generic interface read-back + * virtual channel identification + */ + u32 gen_rx_vcid: 2; + + /* This field configures the DPI virtual channel id that + * is indexed to the VIDEO mode packets + */ + u32 video_pkt_vcid: 2; + + u32 reserved: 28; + + } bits; + } VIRTUAL_CHANNEL_ID; + + union _0x20 { + u32 val; + struct _DPI_VIDEO_FORMAT { + /* + * This field configures the DPI color coding as follows: + * 0000: 16-bit configuration 1 + * 0001: 16-bit configuration 2 + * 0010: 16-bit configuration 3 + * 0011: 18-bit configuration 1 + * 0100: 18-bit configuration 2 + * 0101: 24-bit + * 0110: 20-bit YCbCr 4:2:2 loosely packed + * 0111: 24-bit YCbCr 4:2:2 + * 1000: 16-bit YCbCr 4:2:2 + * 1001: 30-bit + * 1010: 36-bit + * 1011: 12-bit YCbCr 4:2:0 + * 1100: Compression Display Stream + * 1101-1111: 12-bit YCbCr 4:2:0 + */ + u32 dpi_video_mode_format: 6; + + /* When set to 1, this bit activates loosely packed + * variant to 18-bit configurations + */ + u32 loosely18_en: 1; + + u32 reserved: 25; + + } bits; + } DPI_VIDEO_FORMAT; + + union _0x24 { + u32 val; + struct _VIDEO_PKT_CONFIG { + /* + * This field configures the number of pixels in a single + * video packet. For 18-bit not loosely packed data types, + * this number must be a multiple of 4. For YCbCr data + * types, it must be a multiple of 2, as described in the + * DSI specification. + */ + u32 video_pkt_size: 16; + + /* + * This register configures the number of chunks to be + * transmitted during a Line period (a chunk consists of + * a video packet and a null packet). If set to 0 or 1, + * the video line is transmitted in a single packet. If + * set to 1, the packet is part of a chunk, so a null packet + * follows it if vid_null_size > 0. Otherwise, multiple chunks + * are used to transmit each video line. + */ + u32 video_line_chunk_num: 16; + + } bits; + } VIDEO_PKT_CONFIG; + + union _0x28 { + u32 val; + struct _VIDEO_LINE_HBLK_TIME { + /* This field configures the Horizontal Back Porch period + * in lane byte clock cycles + */ + u32 video_line_hbp_time: 16; + + /* This field configures the Horizontal Synchronism Active + * period in lane byte clock cycles + */ + u32 video_line_hsa_time: 16; + + } bits; + } VIDEO_LINE_HBLK_TIME; + + union _0x2C { + u32 val; + struct _VIDEO_LINE_TIME { + /* This field configures the size of the total line time + * (HSA+HBP+HACT+HFP) counted in lane byte clock cycles + */ + u32 video_line_time: 16; + + u32 reserved: 16; + + } bits; + } VIDEO_LINE_TIME; + + union _0x30 { + u32 val; + struct _VIDEO_VBLK_LINES { + /* This field configures the Vertical Front Porch period + * measured in number of horizontal lines + */ + u32 vfp_lines: 10; + + /* This field configures the Vertical Back Porch period + * measured in number of horizontal lines + */ + u32 vbp_lines: 10; + + /* This field configures the Vertical Synchronism Active + * period measured in number of horizontal lines + */ + u32 vsa_lines: 10; + + u32 reserved: 2; + + } bits; + } VIDEO_VBLK_LINES; + + union _0x34 { + u32 val; + struct _VIDEO_VACTIVE_LINES { + /* This field configures the Vertical Active period measured + * in number of horizontal lines + */ + u32 vactive_lines: 14; + + u32 reserved: 18; + + } bits; + } VIDEO_VACTIVE_LINES; + + union _0x38 { + u32 val; + struct _VID_MODE_CFG { + /* + * This field indicates the video mode transmission type as + * follows: + * 00: Non-burst with sync pulses + * 01: Non-burst with sync events + * 10 and 11: Burst mode + */ + u32 vid_mode_type: 2; + + u32 reserved_0: 6; + + /* When set to 1, this bit enables the return to low-power + * inside the VSA period when timing allows. + */ + u32 lp_vsa_en: 1; + + /* When set to 1, this bit enables the return to low-power + * inside the VBP period when timing allows. + */ + u32 lp_vbp_en: 1; + + /* When set to 1, this bit enables the return to low-power + * inside the VFP period when timing allows. + */ + u32 lp_vfp_en: 1; + + /* When set to 1, this bit enables the return to low-power + * inside the VACT period when timing allows. + */ + u32 lp_vact_en: 1; + + /* When set to 1, this bit enables the return to low-power + * inside the HBP period when timing allows. + */ + u32 lp_hbp_en: 1; + + /* When set to 1, this bit enables the return to low-power + * inside the HFP period when timing allows. + */ + u32 lp_hfp_en: 1; + + /* When set to 1, this bit enables the request for an ack- + * nowledge response at the end of a frame. + */ + u32 frame_bta_ack_en: 1; + + /* When set to 1, this bit enables the command transmission + * only in low-power mode. + */ + u32 lp_cmd_en: 1; + + u32 reserved_1: 16; + + } bits; + } VID_MODE_CFG; + + union _0x3C { + u32 val; + struct _SDF_MODE_CONFIG { + /* + * This field defines the 3D mode on/off & display orientation: + * 00: 3D mode off (2D mode on) + * 01: 3D mode on, portrait orientation + * 10: 3D mode on, landscape orientation + * 11: Reserved + */ + u32 rf_3d_mode: 2; + + /* + * This field defines the 3D image format: + * 00: Line (alternating lines of left and right data) + * 01: Frame (alternating frames of left and right data) + * 10: Pixel (alternating pixels of left and right data) + * 11: Reserved + */ + u32 rf_3d_format: 2; + + /* + * This field defines whether there is a second VSYNC pulse + * between Left and Right Images, when 3D Image Format is + * Frame-based: + * 0: No sync pulses between left and right data + * 1: Sync pulse (HSYNC, VSYNC, blanking) between left and + * right data + */ + u32 second_vsync_en: 1; + + /* + * This bit defines the left or right order: + * 0: Left eye data is sent first, and then the right eye data + * is sent. + * 1: Right eye data is sent first, and then the left eye data + * is sent. + */ + u32 left_right_order: 1; + + u32 reserved_0: 2; + + /* + * When set, causes the next VSS packet to include 3D control + * payload in every VSS packet. + */ + u32 rf_3d_payload_en: 1; + + u32 reserved_1: 23; + + } bits; + } SDF_MODE_CONFIG; + + union _0x40 { + u32 val; + struct _TIMEOUT_CNT_CLK_CONFIG { + /* + * This field indicates the division factor for the Time Out + * clock used as the timing unit in the configuration of HS to + * LP and LP to HS transition error. + */ + u32 timeout_cnt_clk_config: 16; + + u32 reserved: 16; + + } bits; + } TIMEOUT_CNT_CLK_CONFIG; + + union _0x44 { + u32 val; + struct _HTX_TO_CONFIG { + /* + * This field configures the timeout counter that triggers + * a high speed transmission timeout contention detection + * (measured in TO_CLK_DIVISION cycles). + * + * If using the non-burst mode and there is no sufficient + * time to switch from HS to LP and back in the period which + * is from one line data finishing to the next line sync + * start, the DSI link returns the LP state once per frame, + * then you should configure the TO_CLK_DIVISION and + * hstx_to_cnt to be in accordance with: + * hstx_to_cnt * lanebyteclkperiod * TO_CLK_DIVISION >= the + * time of one FRAME data transmission * (1 + 10%) + * + * In burst mode, RGB pixel packets are time-compressed, + * leaving more time during a scan line. Therefore, if in + * burst mode and there is sufficient time to switch from HS + * to LP and back in the period of time from one line data + * finishing to the next line sync start, the DSI link can + * return LP mode and back in this time interval to save power. + * For this, configure the TO_CLK_DIVISION and hstx_to_cnt + * to be in accordance with: + * hstx_to_cnt * lanebyteclkperiod * TO_CLK_DIVISION >= the + * time of one LINE data transmission * (1 + 10%) + */ + u32 htx_to_cnt_limit: 32; + } bits; + } HTX_TO_CONFIG; + + union _0x48 { + u32 val; + struct _LRX_H_TO_CONFIG { + /* + * This field configures the timeout counter that triggers + * a low-power reception timeout contention detection (measured + * in TO_CLK_DIVISION cycles). + */ + u32 lrx_h_to_cnt_limit: 32; + } bits; + } LRX_H_TO_CONFIG; + + union _0x4C { + u32 val; + struct _RD_PRESP_TO_CONFIG { + /* + * This field sets a period for which the DWC_mipi_dsi_host + * keeps the link still, after sending a low-power read oper- + * ation. This period is measured in cycles of lanebyteclk. + * The counting starts when the D-PHY enters the Stop state + * and causes no interrupts. + */ + u32 lprd_presp_to_cnt_limit: 16; + + /* + * This field sets a period for which the DWC_mipi_dsi_host + * keeps the link still, after sending a high-speed read oper- + * ation. This period is measured in cycles of lanebyteclk. + * The counting starts when the D-PHY enters the Stop state + * and causes no interrupts. + */ + u32 hsrd_presp_to_cnt_limit: 16; + + } bits; + } RD_PRESP_TO_CONFIG; + + union _0x50 { + u32 val; + struct _HSWR_PRESP_TO_CONFIG { + /* + * This field sets a period for which the DWC_mipi_dsi_host + * keeps the link inactive after sending a high-speed write + * operation. This period is measured in cycles of lanebyteclk. + * The counting starts when the D-PHY enters the Stop state + * and causes no interrupts. + */ + u32 hswr_presp_to_cnt_limit: 16; + + u32 reserved_0: 8; + + /* + * When set to 1, this bit ensures that the peripheral response + * timeout caused by hs_wr_to_cnt is used only once per eDPI + * frame, when both the following conditions are met: + * dpivsync_edpiwms has risen and fallen. + * Packets originated from eDPI have been transmitted and its + * FIFO is empty again In this scenario no non-eDPI requests + * are sent to the D-PHY, even if there is traffic from generic + * or DBI ready to be sent, making it return to stop state. + * When it does so, PRESP_TO counter is activated and only when + * it finishes does the controller send any other traffic that + * is ready. + */ + u32 hswr_presp_to_mode: 1; + + u32 reserved_1: 7; + + } bits; + } HSWR_PRESP_TO_CONFIG; + + union _0x54 { + u32 val; + struct _LPWR_PRESP_TO_CONFIG { + /* + * This field sets a period for which the DWC_mipi_dsi_host + * keeps the link still, after sending a low-power write oper- + * ation. This period is measured in cycles of lanebyteclk. + * The counting starts when the D-PHY enters the Stop state + * and causes no interrupts. + */ + u32 lpwr_presp_to_cnt_limit: 16; + + u32 reserved: 16; + + } bits; + } LPWR_PRESP_TO_CONFIG; + + union _0x58 { + u32 val; + struct _BTA_PRESP_TO_CONFIG { + /* + * This field sets a period for which the DWC_mipi_dsi_host + * keeps the link still, after completing a Bus Turn-Around. + * This period is measured in cycles of lanebyteclk. The + * counting starts when the D-PHY enters the Stop state and + * causes no interrupts. + */ + u32 bta_presp_to_cnt_limit: 16; + + u32 reserved: 16; + + } bits; + } BTA_PRESP_TO_CONFIG; + + union _0x5C { + u32 val; + struct _TX_ESC_CLK_CONFIG { + /* + * This field indicates the division factor for the TX Escape + * clock source (lanebyteclk). The values 0 and 1 stop the + * TX_ESC clock generation. + */ + u32 tx_esc_clk_config: 16; + + u32 reserved: 16; + + } bits; + } TX_ESC_CLK_CONFIG; + + union _0x60 { + u32 val; + struct _VACT_CMD_TRANS_LIMIT { + /* + * This field is used for the transmission of commands in + * low-power mode. It defines the size, in bytes, of the + * largest packet that can fit in a line during the VACT + * region. + */ + u32 vact_cmd_trans_limit: 8; + + u32 reserved: 24; + + } bits; + } VACT_CMD_TRANS_LIMIT; + + union _0x64 { + u32 val; + struct _VBLK_CMD_TRANS_LIMIT { + /* + * This field is used for the transmission of commands in + * low-power mode. It defines the size, in bytes, of the + * largest packet that can fit in a line during the VSA, VBP, + * and VFP regions. + */ + u32 vblk_cmd_trans_limit: 8; + + u32 reserved: 24; + + } bits; + } VBLK_CMD_TRANS_LIMIT; + + union _0x68 { + u32 val; + struct _CMD_MODE_CFG { + /* + * When set to 1, this bit enables the tearing effect + * acknowledge request. + */ + u32 tear_fx_en: 1; + + /* + * When set to 1, this bit enables the acknowledge request + * after each packet transmission. + */ + u32 ack_rqst_en: 1; + + u32 reserved_0: 3; + + u32 pps_tx: 1; + u32 exq_tx: 1; + u32 cmc_tx: 1; + + /* + * This bit configures the Generic short write packet with + * zero parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sw_0p_tx: 1; + + /* + * This bit configures the Generic short write packet with + * one parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sw_1p_tx: 1; + + /* + * This bit configures the Generic short write packet with + * two parameters command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sw_2p_tx: 1; + + /* + * This bit configures the Generic short read packet with + * zero parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sr_0p_tx: 1; + + /* + * This bit configures the Generic short read packet with + * one parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sr_1p_tx: 1; + + /* + * This bit configures the Generic short read packet with + * two parameters command transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_sr_2p_tx: 1; + + /* + * This bit configures the Generic long write packet command + * transmission type: + * 0: High-speed 1: Low-power + */ + u32 gen_lw_tx: 1; + + u32 reserved_1: 1; + + /* + * This bit configures the DCS short write packet with zero + * parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 dcs_sw_0p_tx: 1; + + /* + * This bit configures the DCS short write packet with one + * parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 dcs_sw_1p_tx: 1; + + /* + * This bit configures the DCS short read packet with zero + * parameter command transmission type: + * 0: High-speed 1: Low-power + */ + u32 dcs_sr_0p_tx: 1; + + /* + * This bit configures the DCS long write packet command + * transmission type: + * 0: High-speed 1: Low-power + */ + u32 dcs_lw_tx: 1; + + u32 reserved_2: 4; + + /* + * This bit configures the maximum read packet size command + * transmission type: + * 0: High-speed 1: Low-power + */ + u32 max_rd_pkt_size: 1; + + u32 reserved_3: 7; + + } bits; + } CMD_MODE_CFG; + + union _0x6C { + u32 val; + struct _GEN_HDR { + /* + * This field configures the packet data type of the header + * packet. + */ + u32 gen_dt: 6; + + /* + * This field configures the virtual channel id of the header + * packet. + */ + u32 gen_vc: 2; + + /* + * This field configures the least significant byte of the + * header packet's Word count for long packets or data 0 for + * short packets. + */ + u32 gen_wc_lsbyte: 8; + + /* + * This field configures the most significant byte of the + * header packet's word count for long packets or data 1 for + * short packets. + */ + u32 gen_wc_msbyte: 8; + + u32 reserved: 8; + + } bits; + } GEN_HDR; + + union _0x70 { + u32 val; + struct _GEN_PLD_DATA { + /* This field indicates byte 1 of the packet payload. */ + u32 gen_pld_b1: 8; + + /* This field indicates byte 2 of the packet payload. */ + u32 gen_pld_b2: 8; + + /* This field indicates byte 3 of the packet payload. */ + u32 gen_pld_b3: 8; + + /* This field indicates byte 4 of the packet payload. */ + u32 gen_pld_b4: 8; + + } bits; + } GEN_PLD_DATA; + + union _0x74 { + u32 val; + struct _PHY_CLK_LANE_LP_CTRL { + /* This bit controls the D-PHY PPI txrequestclkhs signal */ + u32 phy_clklane_tx_req_hs: 1; + + /* This bit enables the automatic mechanism to stop providing + * clock in the clock lane when time allows. + */ + u32 auto_clklane_ctrl_en: 1; + + u32 reserved: 30; + } bits; + } PHY_CLK_LANE_LP_CTRL; + + union _0x78 { + u32 val; + struct _PHY_INTERFACE_CTRL { + /* When set to 0, this bit places the D-PHY macro in power- + * down state. + */ + u32 rf_phy_shutdown: 1; + + /* When set to 0, this bit places the digital section of the + * D-PHY in the reset state. + */ + u32 rf_phy_reset_n: 1; + + /* When set to 1, this bit enables the D-PHY Clock Lane + * module. + */ + u32 rf_phy_clk_en: 1; + + /* When the D-PHY is in ULPS, this bit enables the D-PHY PLL. */ + u32 rf_phy_force_pll: 1; + + /* ULPS mode Request on clock lane */ + u32 rf_phy_clk_txrequlps: 1; + + /* ULPS mode Exit on clock lane */ + u32 rf_phy_clk_txexitulps: 1; + + /* ULPS mode Request on all active data lanes */ + u32 rf_phy_data_txrequlps: 1; + + /* ULPS mode Exit on all active data lanes */ + u32 rf_phy_data_txexitulps: 1; + + u32 reserved: 24; + } bits; + } PHY_INTERFACE_CTRL; + + union _0x7C { + u32 val; + struct _PHY_TX_TRIGGERS { + /* This field controls the trigger transmissions. */ + u32 phy_tx_triggers: 4; + + u32 reserved: 28; + } bits; + } PHY_TX_TRIGGERS; + + union _0x80 { + u32 val; + struct _DESKEW_START { + u32 deskew_start: 1; + u32 reserved: 31; + } bits; + } DESKEW_START; + + union _0x84 { + u32 val; + struct _DESKEW_MODE { + u32 deskew_mode: 2; + u32 reserved: 30; + } bits; + } DESKEW_MODE; + + union _0x88 { + u32 val; + struct _DESKEW_TIME { + u32 deskew_time: 32; + } bits; + } DESKEW_TIME; + + union _0x8C { + u32 val; + struct _DESKEW_PERIOD { + u32 deskew_period: 32; + } bits; + } DESKEW_PERIOD; + + union _0x90 { + u32 val; + struct _DESKEW_BUSY { + u32 deskew_busy: 1; + u32 reserved: 31; + } bits; + } DESKEW_BUSY; + + union _0x94 { + u32 val; + struct _DESKEW_LANE_MASK { + u32 deskew_lane0_mask: 1; + u32 deskew_lane1_mask: 1; + u32 deskew_lane2_mask: 1; + u32 deskew_lane3_mask: 1; + u32 reserved: 28; + } bits; + } DESKEW_LANE_MASK; + + union _0x98 { + u32 val; + struct _CMD_MODE_STATUS { + /* + * This bit is set when a read command is issued and cleared + * when the entire response is stored in the FIFO. + * Value after reset: 0x0 + * + * NOTE: + * For mipi-dsi-r1p0 IP, this bit is set immediately when + * the read cmd is set to the GEN_HDR register. + * + * For dsi-ctrl-r1p0 IP, this bit is set only after the read + * cmd was actually sent out from the controller. + */ + u32 gen_cmd_rdcmd_ongoing: 1; + + /* + * This bit indicates the empty status of the generic read + * payload FIFO. + * Value after reset: 0x1 + */ + u32 gen_cmd_rdata_fifo_empty: 1; + + /* + * This bit indicates the full status of the generic read + * payload FIFO. + * Value after reset: 0x0 + */ + u32 gen_cmd_rdata_fifo_full: 1; + + /* + * This bit indicates the empty status of the generic write + * payload FIFO. + * Value after reset: 0x1 + */ + u32 gen_cmd_wdata_fifo_empty: 1; + + /* + * This bit indicates the full status of the generic write + * payload FIFO. + * Value after reset: 0x0 + */ + u32 gen_cmd_wdata_fifo_full: 1; + + /* + * This bit indicates the empty status of the generic + * command FIFO. + * Value after reset: 0x1 + */ + u32 gen_cmd_cmd_fifo_empty: 1; + + /* + * This bit indicates the full status of the generic + * command FIFO. + * Value after reset: 0x0 + */ + u32 gen_cmd_cmd_fifo_full: 1; + + /* + * This bit is set when the entire response of read is + * stored in the rx payload FIFO. And it will be cleared + * automaticlly after read this bit each time. + * Value after reset: 0x0 + * + * NOTE: this bit is just supported for dsi-ctrl-r1p0 IP + */ + u32 gen_cmd_rdcmd_done: 1; + + u32 reserved : 24; + + } bits; + } CMD_MODE_STATUS; + + union _0x9C { + u32 val; + struct _PHY_STATUS { + /* the status of phydirection D-PHY signal */ + u32 phy_direction: 1; + + /* the status of phylock D-PHY signal */ + u32 phy_lock: 1; + + /* the status of rxulpsesc0lane D-PHY signal */ + u32 phy_rxulpsesc0lane: 1; + + /* the status of phystopstateclklane D-PHY signal */ + u32 phy_stopstateclklane: 1; + + /* the status of phystopstate0lane D-PHY signal */ + u32 phy_stopstate0lane: 1; + + /* the status of phystopstate1lane D-PHY signal */ + u32 phy_stopstate1lane: 1; + + /* the status of phystopstate2lane D-PHY signal */ + u32 phy_stopstate2lane: 1; + + /* the status of phystopstate3lane D-PHY signal */ + u32 phy_stopstate3lane: 1; + + /* the status of phyulpsactivenotclk D-PHY signal */ + u32 phy_ulpsactivenotclk: 1; + + /* the status of ulpsactivenot0lane D-PHY signal */ + u32 phy_ulpsactivenot0lane: 1; + + /* the status of ulpsactivenot1lane D-PHY signal */ + u32 phy_ulpsactivenot1lane: 1; + + /* the status of ulpsactivenot2lane D-PHY signal */ + u32 phy_ulpsactivenot2lane: 1; + + /* the status of ulpsactivenot3lane D-PHY signal */ + u32 phy_ulpsactivenot3lane: 1; + + u32 reserved: 19; + + } bits; + } PHY_STATUS; + + union _0xA0 { + u32 val; + struct _PHY_MIN_STOP_TIME { + /* This field configures the minimum wait period to request + * a high-speed transmission after the Stop state. + */ + u32 phy_min_stop_time: 8; + + u32 reserved: 24; + } bits; + } PHY_MIN_STOP_TIME; + + union _0xA4 { + u32 val; + struct _PHY_LANE_NUM_CONFIG { + /* + * This field configures the number of active data lanes: + * 00: One data lane (lane 0) + * 01: Two data lanes (lanes 0 and 1) + * 10: Three data lanes (lanes 0, 1, and 2) + * 11: Four data lanes (lanes 0, 1, 2, and 3) + */ + u32 phy_lane_num: 2; + + u32 reserved: 30; + + } bits; + } PHY_LANE_NUM_CONFIG; + + union _0xA8 { + u32 val; + struct _PHY_CLKLANE_TIME_CONFIG { + /* + * This field configures the maximum time that the D-PHY + * clock lane takes to go from low-power to high-speed + * transmission measured in lane byte clock cycles. + */ + u32 phy_clklane_lp_to_hs_time: 16; + + /* + * This field configures the maximum time that the D-PHY + * clock lane takes to go from high-speed to low-power + * transmission measured in lane byte clock cycles. + */ + u32 phy_clklane_hs_to_lp_time: 16; + + } bits; + } PHY_CLKLANE_TIME_CONFIG; + + union _0xAC { + u32 val; + struct _PHY_DATALANE_TIME_CONFIG { + /* + * This field configures the maximum time that the D-PHY data + * lanes take to go from low-power to high-speed transmission + * measured in lane byte clock cycles. + */ + u32 phy_datalane_lp_to_hs_time: 16; + + /* + * This field configures the maximum time that the D-PHY data + * lanes take to go from high-speed to low-power transmission + * measured in lane byte clock cycles. + */ + u32 phy_datalane_hs_to_lp_time: 16; + + } bits; + } PHY_DATALANE_TIME_CONFIG; + + union _0xB0 { + u32 val; + struct _MAX_READ_TIME { + /* + * This field configures the maximum time required to perform + * a read command in lane byte clock cycles. This register can + * only be modified when no read command is in progress. + */ + u32 max_rd_time: 16; + + u32 reserved: 16; + + } bits; + } MAX_READ_TIME; + + union _0xB4 { + u32 val; + struct _RX_PKT_CHECK_CONFIG { + /* When set to 1, this bit enables the ECC reception, error + * correction, and reporting. + */ + u32 rx_pkt_ecc_en: 1; + + /* When set to 1, this bit enables the CRC reception and error + * reporting. + */ + u32 rx_pkt_crc_en: 1; + + u32 reserved: 30; + + } bits; + } RX_PKT_CHECK_CONFIG; + + union _0xB8 { + u32 val; + struct _TA_EN { + /* When set to 1, this bit enables the Bus Turn-Around (BTA) + * request. + */ + u32 ta_en: 1; + + u32 reserved: 31; + + } bits; + } TA_EN; + + union _0xBC { + u32 val; + struct _EOTP_EN { + /* When set to 1, this bit enables the EoTp transmission */ + u32 tx_eotp_en: 1; + + /* When set to 1, this bit enables the EoTp reception. */ + u32 rx_eotp_en: 1; + + u32 reserved: 30; + + } bits; + } EOTP_EN; + + union _0xC0 { + u32 val; + struct _VIDEO_NULLPKT_SIZE { + /* + * This register configures the number of bytes inside a null + * packet. Setting it to 0 disables the null packets. + */ + u32 video_nullpkt_size: 13; + + u32 reserved: 19; + + } bits; + } VIDEO_NULLPKT_SIZE; + + union _0xC4 { + u32 val; + struct _DCS_WM_PKT_SIZE { + /* + * This field configures the maximum allowed size for an eDPI + * write memory command, measured in pixels. Automatic parti- + * tioning of data obtained from eDPI is permanently enabled. + */ + u32 dcs_wm_pkt_size: 16; + + u32 reserved: 16; + } bits; + } DCS_WM_PKT_SIZE; + + union _0xC8 { + u32 val; + struct _PROTOCOL_INT_CLR { + u32 clr_dphy_errors_0: 1; + u32 clr_dphy_errors_1: 1; + u32 clr_dphy_errors_2: 1; + u32 clr_dphy_errors_3: 1; + u32 clr_dphy_errors_4: 1; + u32 clr_protocol_debug_err: 11; + u32 clr_ack_with_err_0: 1; + u32 clr_ack_with_err_1: 1; + u32 clr_ack_with_err_2: 1; + u32 clr_ack_with_err_3: 1; + u32 clr_ack_with_err_4: 1; + u32 clr_ack_with_err_5: 1; + u32 clr_ack_with_err_6: 1; + u32 clr_ack_with_err_7: 1; + u32 clr_ack_with_err_8: 1; + u32 clr_ack_with_err_9: 1; + u32 clr_ack_with_err_10: 1; + u32 clr_ack_with_err_11: 1; + u32 clr_ack_with_err_12: 1; + u32 clr_ack_with_err_13: 1; + u32 clr_ack_with_err_14: 1; + u32 clr_ack_with_err_15: 1; + } bits; + } PROTOCOL_INT_CLR; + + union _0xCC { + u32 val; + struct _INTERNAL_INT_CLR { + u32 clr_receive_pkt_size_err: 1; + u32 clr_eopt_not_receive_err: 1; + u32 clr_gen_cmd_cmd_fifo_wr_err: 1; + u32 clr_gen_cmd_rdata_fifo_rd_err: 1; + u32 clr_gen_cmd_rdata_fifo_wr_err: 1; + u32 clr_gen_cmd_wdata_fifo_wr_err: 1; + u32 clr_gen_cmd_wdata_fifo_rd_err: 1; + u32 clr_dpi_pix_fifo_wr_err: 1; + u32 clr_internal_debug_err: 19; + u32 clr_ecc_single_err: 1; + u32 clr_ecc_multi_err: 1; + u32 clr_crc_err: 1; + u32 clr_hs_tx_timeout: 1; + u32 clr_lp_rx_timeout: 1; + } bits; + } INTERNAL_INT_CLR; + + union _0xD0 { + u32 val; + struct _VIDEO_SIG_DELAY_CONFIG { + + /* + * DPI interface signal delay to be used in clk lanebyte + * domain for control logic to read video data from pixel + * memory in mannal mode, measured in clk_lanebyte cycles + */ + u32 video_sig_delay: 24; + + /* + * 1'b1: mannal mode + * dsi controller will use video_sig_delay value as + * the delay for the packet handle logic to read video + * data from pixel memory. + * + * 1'b0: auto mode + * dsi controller will auto calculate the delay for + * the packet handle logic to read video data from + * pixel memory. + */ + u32 video_sig_delay_mode: 1; + + u32 reserved: 7; + } bits; + } VIDEO_SIG_DELAY_CONFIG; + + u32 reservedD4_EC[7]; + + union _0xF0 { + u32 val; + struct _PHY_TST_CTRL0 { + /* PHY test interface clear (active high) */ + u32 phy_testclr: 1; + + /* This bit is used to clock the TESTDIN bus into the D-PHY */ + u32 phy_testclk: 1; + + u32 reserved: 30; + } bits; + } PHY_TST_CTRL0; + + union _0xF4 { + u32 val; + struct _PHY_TST_CTRL1 { + /* PHY test interface input 8-bit data bus for internal + * register programming and test functionalities access. + */ + u32 phy_testdin: 8; + + /* PHY output 8-bit data bus for read-back and internal + * probing functionalities. + */ + u32 phy_testdout: 8; + + /* + * PHY test interface operation selector: + * 1: The address write operation is set on the falling edge + * of the testclk signal. + * 0: The data write operation is set on the rising edge of + * the testclk signal. + */ + u32 phy_testen: 1; + + u32 reserved: 15; + } bits; + } PHY_TST_CTRL1; + + u32 reservedF8_1FC[66]; + + union _0x200 { + u32 val; + struct _INT_PLL_STS { + u32 int_pll_sts: 1; + u32 reserved: 31; + } bits; + } INT_PLL_STS; + + union _0x204 { + u32 val; + struct _INT_PLL_MSK { + u32 int_pll_msk: 1; + u32 reserved: 31; + } bits; + } INT_PLL_MSK; + + union _0x208 { + u32 val; + struct _INT_PLL_CLR { + u32 int_pll_clr: 1; + u32 reserved: 31; + } bits; + } INT_PLL_CLR; + +}; + +#endif diff --git a/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0_ppi.c b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0_ppi.c new file mode 100644 index 0000000..c8f903b --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/core/dsi_ctrl_r1p0_ppi.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include +#include + +#include "dsi_ctrl_r1p0.h" +#include "sprd_dphy.h" + +/* + * Reset D-PHY module + * @param phy: pointer to structure + * which holds information about the d-phy module + * @param reset + */ +static void dsi_phy_rstz(struct dphy_context *ctx, int level) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_reset_n = level; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +/* + * Power up/down D-PHY module + * @param phy: pointer to structure + * which holds information about the d-phy module + * @param enable (1: shutdown) + */ +static void dsi_phy_shutdownz(struct dphy_context *ctx, int level) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_shutdown = level; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +/* + * Force D-PHY PLL to stay on while in ULPS + * @param phy: pointer to structure + * which holds information about the d-phy module + * @param force (1) disable (0) + * @note To follow the programming model, use wakeup_pll function + */ +static void dsi_phy_force_pll(struct dphy_context *ctx, int force) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_force_pll = force; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +static void dsi_phy_clklane_ulps_rqst(struct dphy_context *ctx, int en) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_clk_txrequlps = en; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +static void dsi_phy_clklane_ulps_exit(struct dphy_context *ctx, int en) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_clk_txexitulps = en; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +static void dsi_phy_datalane_ulps_rqst(struct dphy_context *ctx, int en) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_data_txrequlps = en; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +static void dsi_phy_datalane_ulps_exit(struct dphy_context *ctx, int en) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_data_txexitulps = en; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +/* + * Configure minimum wait period for HS transmission request after a stop state + * @param phy pointer to structure which holds information about the d-phy + * module + * @param no_of_byte_cycles [in byte (lane) clock cycles] + */ +static void dsi_phy_stop_wait_time(struct dphy_context *ctx, u8 byte_cycle) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + + writel(byte_cycle, ®->PHY_MIN_STOP_TIME); +} + +/* + * Set number of active lanes + * @param phy: pointer to structure + * which holds information about the d-phy module + * @param no_of_lanes + */ +static void dsi_phy_datalane_en(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + + writel(ctx->lanes - 1, ®->PHY_LANE_NUM_CONFIG); +} + +/* + * Enable clock lane module + * @param phy pointer to structure + * which holds information about the d-phy module + * @param en + */ +static void dsi_phy_clklane_en(struct dphy_context *ctx, int en) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x78 phy_interface_ctrl; + + phy_interface_ctrl.val = readl(®->PHY_INTERFACE_CTRL); + phy_interface_ctrl.bits.rf_phy_clk_en = en; + + writel(phy_interface_ctrl.val, ®->PHY_INTERFACE_CTRL); +} + +/* + * Request the PHY module to start transmission of high speed clock. + * This causes the clock lane to start transmitting DDR clock on the + * lane interconnect. + * @param phy pointer to structure which holds information about the d-phy + * module + * @param enable + * @note this function should be called explicitly by user always except for + * transmitting + */ +static void dsi_phy_clk_hs_rqst(struct dphy_context *ctx, int enable) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x74 phy_clk_lane_lp_ctrl; + + phy_clk_lane_lp_ctrl.val = readl(®->PHY_CLK_LANE_LP_CTRL); + phy_clk_lane_lp_ctrl.bits.auto_clklane_ctrl_en = 0; + phy_clk_lane_lp_ctrl.bits.phy_clklane_tx_req_hs = enable; + + writel(phy_clk_lane_lp_ctrl.val, ®->PHY_CLK_LANE_LP_CTRL); +} + +/* + * Get D-PHY PPI status + * @param phy pointer to structure which holds information about the d-phy + * module + * @param mask + * @return status + */ +static u8 dsi_phy_is_pll_locked(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + return phy_status.bits.phy_lock; +} + +static u8 dsi_phy_is_rx_direction(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + return phy_status.bits.phy_direction; +} + +static u8 dsi_phy_is_rx_ulps_esc_lane0(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + return phy_status.bits.phy_rxulpsesc0lane; +} + +static u8 dsi_phy_is_stop_state_datalane(struct dphy_context *ctx) +{ + u8 state = 0; + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + if (phy_status.bits.phy_stopstate0lane) + state |= BIT(0); + if (phy_status.bits.phy_stopstate1lane) + state |= BIT(1); + if (phy_status.bits.phy_stopstate2lane) + state |= BIT(2); + if (phy_status.bits.phy_stopstate3lane) + state |= BIT(3); + + return state; +} + +static u8 dsi_phy_is_stop_state_clklane(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + return phy_status.bits.phy_stopstateclklane; +} + +static u8 dsi_phy_is_ulps_active_datalane(struct dphy_context *ctx) +{ + u8 state = 0; + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + if (!phy_status.bits.phy_ulpsactivenot0lane) + state |= BIT(0); + if (!phy_status.bits.phy_ulpsactivenot1lane) + state |= BIT(1); + if (!phy_status.bits.phy_ulpsactivenot2lane) + state |= BIT(2); + if (!phy_status.bits.phy_ulpsactivenot3lane) + state |= BIT(3); + + return state; +} + +static u8 dsi_phy_is_ulps_active_clklane(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0x9C phy_status; + + phy_status.val = readl(®->PHY_STATUS); + + return !phy_status.bits.phy_ulpsactivenotclk; +} + +/* + * @param phy pointer to structure which holds information about the d-phy + * module + * @param value + */ +static void dsi_phy_test_clk(struct dphy_context *ctx, u8 value) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0xF0 phy_tst_ctrl0; + + phy_tst_ctrl0.val = readl(®->PHY_TST_CTRL0); + phy_tst_ctrl0.bits.phy_testclk = value; + + writel(phy_tst_ctrl0.val, ®->PHY_TST_CTRL0); +} + +/* + * @param phy pointer to structure which holds information about the d-phy + * module + * @param value + */ +static void dsi_phy_test_clr(struct dphy_context *ctx, u8 value) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0xF0 phy_tst_ctrl0; + + phy_tst_ctrl0.val = readl(®->PHY_TST_CTRL0); + phy_tst_ctrl0.bits.phy_testclr = value; + + writel(phy_tst_ctrl0.val, ®->PHY_TST_CTRL0); +} + +/* + * @param phy pointer to structure which holds information about the d-phy + * module + * @param on_falling_edge + */ +static void dsi_phy_test_en(struct dphy_context *ctx, u8 value) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0xF4 phy_tst_ctrl1; + + phy_tst_ctrl1.val = readl(®->PHY_TST_CTRL1); + phy_tst_ctrl1.bits.phy_testen = value; + + writel(phy_tst_ctrl1.val, ®->PHY_TST_CTRL1); +} + +/* + * @param phy pointer to structure which holds information about the d-phy + * module + */ +static u8 dsi_phy_test_dout(struct dphy_context *ctx) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0xF4 phy_tst_ctrl1; + + phy_tst_ctrl1.val = readl(®->PHY_TST_CTRL1); + + return phy_tst_ctrl1.bits.phy_testdout; +} + +/* + * @param phy pointer to structure which holds information about the d-phy + * module + * @param test_data + */ +static void dsi_phy_test_din(struct dphy_context *ctx, u8 data) +{ + struct dsi_reg *reg = (struct dsi_reg *)ctx->ctrlbase; + union _0xF4 phy_tst_ctrl1; + + phy_tst_ctrl1.val = readl(®->PHY_TST_CTRL1); + phy_tst_ctrl1.bits.phy_testdin = data; + + writel(phy_tst_ctrl1.val, ®->PHY_TST_CTRL1); +} + +struct dphy_ppi_ops dsi_ctrl_ppi_ops = { + .rstz = dsi_phy_rstz, + .shutdownz = dsi_phy_shutdownz, + .force_pll = dsi_phy_force_pll, + .clklane_ulps_rqst = dsi_phy_clklane_ulps_rqst, + .clklane_ulps_exit = dsi_phy_clklane_ulps_exit, + .datalane_ulps_rqst = dsi_phy_datalane_ulps_rqst, + .datalane_ulps_exit = dsi_phy_datalane_ulps_exit, + .stop_wait_time = dsi_phy_stop_wait_time, + .datalane_en = dsi_phy_datalane_en, + .clklane_en = dsi_phy_clklane_en, + .clk_hs_rqst = dsi_phy_clk_hs_rqst, + .is_pll_locked = dsi_phy_is_pll_locked, + .is_rx_direction = dsi_phy_is_rx_direction, + .is_rx_ulps_esc_lane0 = dsi_phy_is_rx_ulps_esc_lane0, + .is_stop_state_datalane = dsi_phy_is_stop_state_datalane, + .is_stop_state_clklane = dsi_phy_is_stop_state_clklane, + .is_ulps_active_datalane = dsi_phy_is_ulps_active_datalane, + .is_ulps_active_clklane = dsi_phy_is_ulps_active_clklane, + .tst_clk = dsi_phy_test_clk, + .tst_clr = dsi_phy_test_clr, + .tst_en = dsi_phy_test_en, + .tst_dout = dsi_phy_test_dout, + .tst_din = dsi_phy_test_din, + .bist_en = NULL, + .is_bist_ok = NULL, +}; diff --git a/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.c b/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.c new file mode 100644 index 0000000..b17324b --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.c @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include + +#include "sprd_dsi_hal.h" + +static u16 calc_bytes_per_pixel_x100(int coding) +{ + u16 Bpp_x100; + + switch (coding) { + case COLOR_CODE_16BIT_CONFIG1: + case COLOR_CODE_16BIT_CONFIG2: + case COLOR_CODE_16BIT_CONFIG3: + Bpp_x100 = 200; + break; + case COLOR_CODE_18BIT_CONFIG1: + case COLOR_CODE_18BIT_CONFIG2: + Bpp_x100 = 225; + break; + case COLOR_CODE_24BIT: + Bpp_x100 = 300; + break; + case COLOR_CODE_COMPRESSTION: + Bpp_x100 = 100; + break; + case COLOR_CODE_20BIT_YCC422_LOOSELY: + Bpp_x100 = 250; + break; + case COLOR_CODE_24BIT_YCC422: + Bpp_x100 = 300; + break; + case COLOR_CODE_16BIT_YCC422: + Bpp_x100 = 200; + break; + case COLOR_CODE_30BIT: + Bpp_x100 = 375; + break; + case COLOR_CODE_36BIT: + Bpp_x100 = 450; + break; + case COLOR_CODE_12BIT_YCC420: + Bpp_x100 = 150; + break; + default: + pr_err("invalid color coding"); + Bpp_x100 = 0; + break; + } + + return Bpp_x100; +} + +static u8 calc_video_size_step(int coding) +{ + u8 video_size_step; + + switch (coding) { + case COLOR_CODE_16BIT_CONFIG1: + case COLOR_CODE_16BIT_CONFIG2: + case COLOR_CODE_16BIT_CONFIG3: + case COLOR_CODE_18BIT_CONFIG1: + case COLOR_CODE_18BIT_CONFIG2: + case COLOR_CODE_24BIT: + case COLOR_CODE_COMPRESSTION: + return video_size_step = 1; + case COLOR_CODE_20BIT_YCC422_LOOSELY: + case COLOR_CODE_24BIT_YCC422: + case COLOR_CODE_16BIT_YCC422: + case COLOR_CODE_30BIT: + case COLOR_CODE_36BIT: + case COLOR_CODE_12BIT_YCC420: + return video_size_step = 2; + default: + pr_err("invalid color coding"); + return 0; + } +} + +static u16 round_video_size(int coding, u16 video_size) +{ + switch (coding) { + case COLOR_CODE_16BIT_YCC422: + case COLOR_CODE_24BIT_YCC422: + case COLOR_CODE_20BIT_YCC422_LOOSELY: + case COLOR_CODE_12BIT_YCC420: + /* round up active H pixels to a multiple of 2 */ + if ((video_size % 2) != 0) + video_size += 1; + break; + default: + break; + } + + return video_size; +} + +#define SPRD_MIPI_DSI_FMT_DSC 0xff +static u32 fmt_to_coding(u32 fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB565: + return COLOR_CODE_16BIT_CONFIG1; + case MIPI_DSI_FMT_RGB666_PACKED: + return COLOR_CODE_18BIT_CONFIG1; + case MIPI_DSI_FMT_RGB666: + case MIPI_DSI_FMT_RGB888: + return COLOR_CODE_24BIT; + case SPRD_MIPI_DSI_FMT_DSC: + return COLOR_CODE_COMPRESSTION; + default: + DRM_ERROR("Unsupported format (%d)\n", fmt); + return COLOR_CODE_24BIT; + } +} + +#define ns_to_cycle(ns, byte_clk) \ + DIV_ROUND_UP((ns) * (byte_clk), 1000000) + +int sprd_dsi_init(struct sprd_dsi *dsi) +{ + int div; + struct dsi_context *ctx = &dsi->ctx; + u16 max_rd_time; + u16 data_hs2lp, data_lp2hs, clk_hs2lp, clk_lp2hs; + + dsi_hal_power_en(dsi, 0); + dsi_hal_int0_mask(dsi, 0xffffffff); + dsi_hal_int1_mask(dsi, 0xffffffff); + dsi_hal_cmd_mode(dsi); + dsi_hal_eotp_rx_en(dsi, 0); + dsi_hal_eotp_tx_en(dsi, 0); + dsi_hal_ecc_rx_en(dsi, 1); + dsi_hal_crc_rx_en(dsi, 1); + dsi_hal_bta_en(dsi, 1); + dsi_hal_video_vcid(dsi, 0); + dsi_hal_rx_vcid(dsi, 0); + + div = DIV_ROUND_UP(ctx->byte_clk, ctx->esc_clk); + dsi_hal_tx_escape_division(dsi, div); + pr_info("escape clock divider = %d\n", div); + + max_rd_time = ns_to_cycle(ctx->max_rd_time, ctx->byte_clk); + dsi_hal_max_read_time(dsi, max_rd_time); + + data_hs2lp = ns_to_cycle(ctx->data_hs2lp, ctx->byte_clk); + data_lp2hs = ns_to_cycle(ctx->data_lp2hs, ctx->byte_clk); + clk_hs2lp = ns_to_cycle(ctx->clk_hs2lp, ctx->byte_clk); + clk_lp2hs = ns_to_cycle(ctx->clk_lp2hs, ctx->byte_clk); + dsi_hal_datalane_hs2lp_config(dsi, data_hs2lp); + dsi_hal_datalane_lp2hs_config(dsi, data_lp2hs); + dsi_hal_clklane_hs2lp_config(dsi, clk_hs2lp); + dsi_hal_clklane_lp2hs_config(dsi, clk_lp2hs); + + dsi_hal_power_en(dsi, 1); + + return 0; +} + +/* + * Close DSI Host driver + * - Free up resources and shutdown host controller and PHY + * @param dsi pointer to structure holding the DSI Host core information + * @return int + */ +int sprd_dsi_uninit(struct sprd_dsi *dsi) +{ + dsi_hal_int0_mask(dsi, 0xffffffff); + dsi_hal_int1_mask(dsi, 0xffffffff); + dsi_hal_power_en(dsi, 0); + + return 0; +} + +/* + * Configure DPI video interface + * - If not in burst mode, it will compute the video and null packet sizes + * according to necessity + * - Configure timers for data lanes and/or clock lane to return to LP when + * bandwidth is not filled by data + * @param dsi pointer to structure holding the DSI Host core information + * @param param pointer to video stream-to-send information + * @return error code + */ +int sprd_dsi_dpi_video(struct sprd_dsi *dsi) +{ + u16 Bpp_x100; + u16 video_size; + u32 ratio_x1000; + u16 null_pkt_size = 0; + u8 video_size_step; + u32 hs_to; + u32 total_bytes; + u32 bytes_per_chunk; + u32 chunks = 0; + u32 bytes_left = 0; + u32 chunk_overhead; + const u8 pkt_header = 6; + u8 coding; + int div; + u16 hline; + struct dsi_context *ctx = &dsi->ctx; + struct videomode *vm = &dsi->ctx.vm; + + coding = fmt_to_coding(ctx->format); + video_size = round_video_size(coding, vm->hactive); + Bpp_x100 = calc_bytes_per_pixel_x100(coding); + video_size_step = calc_video_size_step(coding); + ratio_x1000 = ctx->byte_clk * 1000 / (vm->pixelclock / 1000); + hline = vm->hactive + vm->hsync_len + vm->hfront_porch + + vm->hback_porch; + + dsi_hal_power_en(dsi, 0); + dsi_hal_dpi_frame_ack_en(dsi, ctx->frame_ack_en); + dsi_hal_dpi_color_coding(dsi, coding); + dsi_hal_dpi_video_burst_mode(dsi, ctx->burst_mode); + dsi_hal_dpi_sig_delay(dsi, 95 * hline * ratio_x1000 / 100000); + dsi_hal_dpi_hline_time(dsi, hline * ratio_x1000 / 1000); + dsi_hal_dpi_hsync_time(dsi, vm->hsync_len * ratio_x1000 / 1000); + dsi_hal_dpi_hbp_time(dsi, vm->hback_porch * ratio_x1000 / 1000); + dsi_hal_dpi_vact(dsi, vm->vactive); + dsi_hal_dpi_vfp(dsi, vm->vfront_porch); + dsi_hal_dpi_vbp(dsi, vm->vback_porch); + dsi_hal_dpi_vsync(dsi, vm->vsync_len); + dsi_hal_dpi_hporch_lp_en(dsi, 1); + dsi_hal_dpi_vporch_lp_en(dsi, 1); + dsi_hal_dpi_hsync_pol(dsi, 0); + dsi_hal_dpi_vsync_pol(dsi, 0); + dsi_hal_dpi_data_en_pol(dsi, 0); + dsi_hal_dpi_color_mode_pol(dsi, 0); + dsi_hal_dpi_shut_down_pol(dsi, 0); + + hs_to = (hline * vm->vactive) + (2 * Bpp_x100) / 100; + for (div = 0x80; (div < hs_to) && (div > 2); div--) { + if ((hs_to % div) == 0) { + dsi_hal_timeout_clock_division(dsi, div); + dsi_hal_lp_rx_timeout(dsi, hs_to / div); + dsi_hal_hs_tx_timeout(dsi, hs_to / div); + break; + } + } + + if (ctx->burst_mode == VIDEO_BURST_WITH_SYNC_PULSES) { + dsi_hal_dpi_video_packet_size(dsi, video_size); + dsi_hal_dpi_null_packet_size(dsi, 0); + dsi_hal_dpi_chunk_num(dsi, 0); + } else { + /* non burst transmission */ + null_pkt_size = 0; + + /* bytes to be sent - first as one chunk */ + bytes_per_chunk = vm->hactive * Bpp_x100 / 100 + pkt_header; + + /* hline total bytes from the DPI interface */ + total_bytes = (vm->hactive + vm->hfront_porch) * + ratio_x1000 / ctx->lanes / 1000; + + /* check if the pixels actually fit on the DSI link */ + if (total_bytes < bytes_per_chunk) { + pr_err("current resolution can not be set\n"); + return -1; + } + + chunk_overhead = total_bytes - bytes_per_chunk; + + /* overhead higher than 1 -> enable multi packets */ + if (chunk_overhead > 1) { + + /* multi packets */ + for (video_size = video_size_step; + video_size < vm->hactive; + video_size += video_size_step) { + + if (vm->hactive * 1000 / video_size % 1000) + continue; + + chunks = vm->hactive / video_size; + bytes_per_chunk = Bpp_x100 * video_size / 100 + + pkt_header; + if (total_bytes >= (bytes_per_chunk * chunks)) { + bytes_left = total_bytes - + bytes_per_chunk * chunks; + break; + } + } + + /* prevent overflow (unsigned - unsigned) */ + if (bytes_left > (pkt_header * chunks)) { + null_pkt_size = (bytes_left - + pkt_header * chunks) / chunks; + /* avoid register overflow */ + if (null_pkt_size > 1023) + null_pkt_size = 1023; + } + + } else { + + /* single packet */ + chunks = 1; + + /* must be a multiple of 4 except 18 loosely */ + for (video_size = vm->hactive; + (video_size % video_size_step) != 0; + video_size++) + ; + } + + dsi_hal_dpi_video_packet_size(dsi, video_size); + dsi_hal_dpi_null_packet_size(dsi, null_pkt_size); + dsi_hal_dpi_chunk_num(dsi, chunks); + } + + dsi_hal_int0_mask(dsi, ctx->int0_mask); + dsi_hal_int1_mask(dsi, ctx->int1_mask); + dsi_hal_power_en(dsi, 1); + + return 0; +} + +int sprd_dsi_edpi_video(struct sprd_dsi *dsi) +{ + const u32 fifo_depth = 1096; + const u32 word_length = 4; + struct dsi_context *ctx = &dsi->ctx; + u32 hactive = ctx->vm.hactive; + u32 Bpp_x100; + u32 max_fifo_len; + u8 coding; + + coding = fmt_to_coding(ctx->format); + Bpp_x100 = calc_bytes_per_pixel_x100(coding); + max_fifo_len = word_length * fifo_depth * 100 / Bpp_x100; + + dsi_hal_power_en(dsi, 0); + dsi_hal_dpi_color_coding(dsi, coding); + dsi_hal_tear_effect_ack_en(dsi, ctx->te_ack_en); + + if (max_fifo_len > hactive) + dsi_hal_edpi_max_pkt_size(dsi, hactive); + else + dsi_hal_edpi_max_pkt_size(dsi, max_fifo_len); + + dsi_hal_int0_mask(dsi, ctx->int0_mask); + dsi_hal_int1_mask(dsi, ctx->int1_mask); + dsi_hal_power_en(dsi, 1); + + return 0; +} + +/* + * Send a packet on the generic interface + * @param dsi pointer to structure holding the DSI Host core information + * @param vc destination virtual channel + * @param data_type type of command, inserted in first byte of header + * @param params byte array of command parameters + * @param param_length length of the above array + * @return error code + * @note this function has an active delay to wait for the buffer to clear. + * The delay is limited to: + * (param_length / 4) x DSIH_FIFO_ACTIVE_WAIT x register access time + * @note the controller restricts the sending of . + * This function will not be able to send Null and Blanking packets due to + * controller restriction + */ +int sprd_dsi_wr_pkt(struct sprd_dsi *dsi, u8 vc, u8 type, + const u8 *param, u16 len) +{ + int i = 0; + int j = 0; + u32 payload; + u8 wc_lsbyte, wc_msbyte; + + if (vc > 3) + return -EINVAL; + + /* 1st: for long packet, must config payload first */ + if (!dsi_hal_wait_tx_payload_fifo_empty(dsi)) + return -1; + + if (len > 2) { + for (i = 0; i < len; i += j) { + payload = 0; + for (j = 0; (j < 4) && ((j + i) < (len)); j++) + payload |= param[i + j] << (j * 8); + + dsi_hal_set_packet_payload(dsi, payload); + } + wc_lsbyte = len & 0xff; + wc_msbyte = len >> 8; + } else { + wc_lsbyte = (len > 0) ? param[0] : 0; + wc_msbyte = (len > 1) ? param[1] : 0; + } + + /* 2nd: then set packet header */ + if (!dsi_hal_wait_tx_cmd_fifo_empty(dsi)) + return -EINVAL; + + dsi_hal_set_packet_header(dsi, vc, type, wc_lsbyte, wc_msbyte); + + return 0; +} + + +/* + * Send READ packet to peripheral using the generic interface + * This will force command mode and stop video mode (because of BTA) + * @param dsi pointer to structure holding the DSI Host core information + * @param vc destination virtual channel + * @param data_type generic command type + * @param lsb_byte first command parameter + * @param msb_byte second command parameter + * @param bytes_to_read no of bytes to read (expected to arrive at buffer) + * @param read_buffer pointer to 8-bit array to hold the read buffer words + * return read_buffer_length + * @note this function has an active delay to wait for the buffer to clear. + * The delay is limited to 2 x DSIH_FIFO_ACTIVE_WAIT + * (waiting for command buffer, and waiting for receiving) + * @note this function will enable BTA + */ +int sprd_dsi_rd_pkt(struct sprd_dsi *dsi, u8 vc, u8 type, + u8 msb_byte, u8 lsb_byte, + u8 *buffer, u8 bytes_to_read) +{ + int i; + int count = 0; + u32 temp; + + if (vc > 3) + return -EINVAL; + + /* 1st: send read command to peripheral */ + if (!dsi_hal_wait_tx_cmd_fifo_empty(dsi)) + return -EINVAL; + + dsi_hal_set_packet_header(dsi, vc, type, lsb_byte, msb_byte); + + /* 2nd: wait peripheral response completed */ + dsi_hal_wait_rd_resp_completed(dsi); + + /* 3rd: get data from rx payload fifo */ + if (dsi_hal_is_rx_payload_fifo_empty(dsi)) { + pr_err("rx payload fifo empty\n"); + return -EINVAL; + } + + for (i = 0; i < 100; i++) { + temp = dsi_hal_get_rx_payload(dsi); + + if (count < bytes_to_read) + buffer[count++] = temp & 0xff; + if (count < bytes_to_read) + buffer[count++] = (temp >> 8) & 0xff; + if (count < bytes_to_read) + buffer[count++] = (temp >> 16) & 0xff; + if (count < bytes_to_read) + buffer[count++] = (temp >> 24) & 0xff; + + if (dsi_hal_is_rx_payload_fifo_empty(dsi)) + return count; + } + + pr_err("read too many buffers\n"); + return -EINVAL; +} + +void sprd_dsi_set_work_mode(struct sprd_dsi *dsi, u8 mode) +{ + if (mode == DSI_MODE_CMD) + dsi_hal_cmd_mode(dsi); + else + dsi_hal_video_mode(dsi); +} + +int sprd_dsi_get_work_mode(struct sprd_dsi *dsi) +{ + if (dsi_hal_is_cmd_mode(dsi)) + return DSI_MODE_CMD; + else + return DSI_MODE_VIDEO; +} + +void sprd_dsi_lp_cmd_enable(struct sprd_dsi *dsi, bool enable) +{ + if (dsi_hal_is_cmd_mode(dsi)) + dsi_hal_cmd_mode_lp_cmd_en(dsi, enable); + else + dsi_hal_video_mode_lp_cmd_en(dsi, enable); +} + +void sprd_dsi_nc_clk_en(struct sprd_dsi *dsi, bool enable) +{ + dsi_hal_nc_clk_en(dsi, enable); +} + +void sprd_dsi_state_reset(struct sprd_dsi *dsi) +{ + dsi_hal_power_en(dsi, 0); + udelay(100); + dsi_hal_power_en(dsi, 1); +} + +u32 sprd_dsi_int_status(struct sprd_dsi *dsi, int index) +{ + u32 status = 0; + + switch (index) { + case 0: + status = dsi_hal_int0_status(dsi); + break; + + case 1: + status = dsi_hal_int1_status(dsi); + break; + + case 2: + status = dsi_hal_int2_status(dsi); + break; + + default: + break; + } + + return status; +} + +void sprd_dsi_int_mask(struct sprd_dsi *dsi, int index) +{ + switch (index) { + case 0: + dsi_hal_int0_mask(dsi, dsi->ctx.int0_mask); + break; + + case 1: + dsi_hal_int1_mask(dsi, dsi->ctx.int1_mask); + break; + + default: + break; + } +} diff --git a/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.h b/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.h new file mode 100644 index 0000000..45a706a --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/sprd_dsi_api.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#ifndef _MIPI_DSI_API_H_ +#define _MIPI_DSI_API_H_ + +#include "sprd_dsi.h" + +int sprd_dsi_init(struct sprd_dsi *dsi); +int sprd_dsi_uninit(struct sprd_dsi *dsi); +int sprd_dsi_dpi_video(struct sprd_dsi *dsi); +int sprd_dsi_edpi_video(struct sprd_dsi *dsi); +int sprd_dsi_wr_pkt(struct sprd_dsi *dsi, u8 vc, u8 type, + const u8 *param, u16 len); +int sprd_dsi_rd_pkt(struct sprd_dsi *dsi, u8 vc, u8 type, + u8 msb_byte, u8 lsb_byte, + u8 *buffer, u8 bytes_to_read); +void sprd_dsi_set_work_mode(struct sprd_dsi *dsi, u8 mode); +int sprd_dsi_get_work_mode(struct sprd_dsi *dsi); +void sprd_dsi_lp_cmd_enable(struct sprd_dsi *dsi, bool enable); +void sprd_dsi_nc_clk_en(struct sprd_dsi *dsi, bool enable); +void sprd_dsi_state_reset(struct sprd_dsi *dsi); +u32 sprd_dsi_int_status(struct sprd_dsi *dsi, int index); +void sprd_dsi_int_mask(struct sprd_dsi *dsi, int index); + +#endif /* _MIPI_DSI_API_H_ */ diff --git a/drivers/gpu/drm/sprd/dsi/sprd_dsi_hal.h b/drivers/gpu/drm/sprd/dsi/sprd_dsi_hal.h new file mode 100644 index 0000000..666500d --- /dev/null +++ b/drivers/gpu/drm/sprd/dsi/sprd_dsi_hal.h @@ -0,0 +1,1102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#ifndef MIPI_DSI_HAL_H_ +#define MIPI_DSI_HAL_H_ + +#include +#include + +#include "sprd_dsi.h" + +/* + * Get DSI Host core version + * @dsi pointer to structure holding the DSI Host core information + * @return true or false + */ +static inline bool dsi_hal_check_version(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (!ops->check_version) + return false; + + return ops->check_version(ctx); +} +/* + * Modify power status of DSI Host core + * @dsi pointer to structure holding the DSI Host core information + * @enable power on(1) or off (0) + */ +static inline void dsi_hal_power_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->power_en) + ops->power_en(ctx, enable); +} +/* + * Enable DPI video mode + * @dsi pointer to structure holding the DSI Host core information + */ +static inline void dsi_hal_video_mode(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->video_mode) + ops->video_mode(ctx); +} +/* + * Enable command mode (Generic interface) + * @dsi pointer to structure holding the DSI Host core information + */ +static inline void dsi_hal_cmd_mode(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->cmd_mode) + ops->cmd_mode(ctx); +} +static inline bool dsi_hal_is_cmd_mode(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_cmd_mode) + return ops->is_cmd_mode(ctx); + + return true; +} +/* + * Configure the read back virtual channel for the generic interface + * @dsi pointer to structure holding the DSI Host core information + * @vc to listen to on the line + */ +static inline void dsi_hal_rx_vcid(struct sprd_dsi *dsi, u8 vc) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->rx_vcid) + ops->rx_vcid(ctx, vc); +} +/* + * Write the DPI video virtual channel destination + * @dsi pointer to structure holding the DSI Host core information + * @vc virtual channel + */ +static inline void dsi_hal_video_vcid(struct sprd_dsi *dsi, u8 vc) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->video_vcid) + ops->video_vcid(ctx, vc); +} +/* + * Set DPI video mode type (burst/non-burst - with sync pulses or events) + * @dsi pointer to structure holding the DSI Host core information + * @type burst mode type: with sync pulse or events + */ +static inline +void dsi_hal_dpi_video_burst_mode(struct sprd_dsi *dsi, int type) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_video_burst_mode) + ops->dpi_video_burst_mode(ctx, type); +} +/* + * Set DPI video color coding + * @dsi pointer to structure holding the DSI Host core information + * @coding enum (configuration and color depth) + */ +static inline void dsi_hal_dpi_color_coding(struct sprd_dsi *dsi, int coding) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_color_coding) + ops->dpi_color_coding(ctx, coding); +} +/* + * Set DPI loosely packetisation video (used only when color depth = 18 + * @dsi pointer to structure holding the DSI Host core information + * @enable 1 enable, 0 disable + */ +static inline +void dsi_hal_dpi_18_loosely_packet_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_18_loosely_packet_en) + ops->dpi_18_loosely_packet_en(ctx, enable); +} +/* + * Set DPI color mode pin polarity + * @dsi pointer to structure holding the DSI Host core information + * @active_low (1) or active high (0) + */ +static inline +void dsi_hal_dpi_color_mode_pol(struct sprd_dsi *dsi, int active_low) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_color_mode_pol) + ops->dpi_color_mode_pol(ctx, active_low); +} +/* + * Set DPI shut down pin polarity + * @dsi pointer to structure holding the DSI Host core information + * @active_low (1) or active high (0) + */ +static inline +void dsi_hal_dpi_shut_down_pol(struct sprd_dsi *dsi, int active_low) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_shut_down_pol) + ops->dpi_shut_down_pol(ctx, active_low); +} +/* + * Set DPI horizontal sync pin polarity + * @dsi pointer to structure holding the DSI Host core information + * @active_low (1) or active high (0) + */ +static inline +void dsi_hal_dpi_hsync_pol(struct sprd_dsi *dsi, int active_low) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_hsync_pol) + ops->dpi_hsync_pol(ctx, active_low); +} +/* + * Set DPI vertical sync pin polarity + * @dsi pointer to structure holding the DSI Host core information + * @active_low (1) or active high (0) + */ +static inline +void dsi_hal_dpi_vsync_pol(struct sprd_dsi *dsi, int active_low) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vsync_pol) + ops->dpi_vsync_pol(ctx, active_low); +} +/* + * Set DPI data enable pin polarity + * @dsi pointer to structure holding the DSI Host core information + * @active_low (1) or active high (0) + */ +static inline +void dsi_hal_dpi_data_en_pol(struct sprd_dsi *dsi, int active_low) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_data_en_pol) + ops->dpi_data_en_pol(ctx, active_low); +} +/* + * Configure the Horizontal Line time + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle taken to transmit the total of the horizontal line + */ +static inline +void dsi_hal_dpi_hline_time(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_hline_time) + ops->dpi_hline_time(ctx, byte_cycle); +} +/* + * Configure the Horizontal back porch time + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle taken to transmit the horizontal back porch + */ +static inline +void dsi_hal_dpi_hbp_time(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_hbp_time) + ops->dpi_hbp_time(ctx, byte_cycle); +} +/* + * Configure the Horizontal sync time + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle taken to transmit the horizontal sync + */ +static inline +void dsi_hal_dpi_hsync_time(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_hsync_time) + ops->dpi_hsync_time(ctx, byte_cycle); +} +/* + * Configure the DPI Interface signal delay time + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle delay time after receiving HSYNC from DPI interface + * to retrieve data from pixel memory + */ +static inline +void dsi_hal_dpi_sig_delay(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_sig_delay) + ops->dpi_sig_delay(ctx, byte_cycle); +} +/* + * Configure the vertical active lines of the video stream + * @dsi pointer to structure holding the DSI Host core information + * @lines + */ +static inline void dsi_hal_dpi_vact(struct sprd_dsi *dsi, u16 lines) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vact) + ops->dpi_vact(ctx, lines); +} +/* + * Configure the vertical front porch lines of the video stream + * @dsi pointer to structure holding the DSI Host core information + * @lines + */ +static inline void dsi_hal_dpi_vfp(struct sprd_dsi *dsi, u16 lines) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vfp) + ops->dpi_vfp(ctx, lines); +} +/* + * Configure the vertical back porch lines of the video stream + * @dsi pointer to structure holding the DSI Host core information + * @lines + */ +static inline void dsi_hal_dpi_vbp(struct sprd_dsi *dsi, u16 lines) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vbp) + ops->dpi_vbp(ctx, lines); +} +/* + * Configure the vertical sync lines of the video stream + * @dsi pointer to structure holding the DSI Host core information + * @lines + */ +static inline void dsi_hal_dpi_vsync(struct sprd_dsi *dsi, u16 lines) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vsync) + ops->dpi_vsync(ctx, lines); +} +/* + * Enable return to low power mode inside horizontal front porch periods when + * timing allows + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_dpi_hporch_lp_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_hporch_lp_en) + ops->dpi_hporch_lp_en(ctx, enable); +} +/* + * Enable return to low power mode inside vertical active lines periods when + * timing allows + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_dpi_vporch_lp_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_vporch_lp_en) + ops->dpi_vporch_lp_en(ctx, enable); +} +/* + * Enable FRAME BTA ACK + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_dpi_frame_ack_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_frame_ack_en) + ops->dpi_frame_ack_en(ctx, enable); +} +/* + * Enable null packets (value in null packet size will be taken in calculations) + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + * note: function retained for backward compatibility (not used from 1.20a on) + */ +static inline +void dsi_hal_dpi_null_packet_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_null_packet_en) + ops->dpi_null_packet_en(ctx, enable); +} +/* + * Enable multi packets (value in no of chunks will be taken in calculations) + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_dpi_multi_packet_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_multi_packet_en) + ops->dpi_multi_packet_en(ctx, enable); +} +/* + * Write no of chunks to core - taken into consideration only when multi packet + * is enabled + * @dsi pointer to structure holding the DSI Host core information + * @num number of chunks + */ +static inline void dsi_hal_dpi_chunk_num(struct sprd_dsi *dsi, u16 num) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_chunk_num) + ops->dpi_chunk_num(ctx, num); +} +/* + * Write the null packet size - will only be taken into account when null + * packets are enabled. + * @dsi pointer to structure holding the DSI Host core information + * @size of null packet + */ +static inline +void dsi_hal_dpi_null_packet_size(struct sprd_dsi *dsi, u16 size) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_null_packet_size) + ops->dpi_null_packet_size(ctx, size); +} +/* + * Write video packet size. obligatory for sending video + * @dsi pointer to structure holding the DSI Host core information + * @size of video packet - containing information + */ +static inline +void dsi_hal_dpi_video_packet_size(struct sprd_dsi *dsi, u16 size) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->dpi_video_packet_size) + ops->dpi_video_packet_size(ctx, size); +} +/* + * Specifiy the size of the packet memory write start/continue + * @dsi pointer to structure holding the DSI Host core information + * @size size of the packet + * note when different than zero (0) eDPI is enabled + */ +static inline void dsi_hal_edpi_max_pkt_size(struct sprd_dsi *dsi, u16 size) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->edpi_max_pkt_size) + ops->edpi_max_pkt_size(ctx, size); +} + +static inline +void dsi_hal_edpi_video_hs_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->edpi_video_hs_en) + ops->edpi_video_hs_en(ctx, enable); +} + +/* + * Enable tear effect acknowledge + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_tear_effect_ack_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->tear_effect_ack_en) + ops->tear_effect_ack_en(ctx, enable); +} +/* + * Enable packets acknowledge request after each packet transmission + * @dsi pointer to structure holding the DSI Host core information + * @enable (1) - disable (0) + */ +static inline +void dsi_hal_cmd_ack_request_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->cmd_ack_request_en) + ops->cmd_ack_request_en(ctx, enable); +} +/* + * Set DCS command packet transmission to transmission type + * @dsi pointer to structure holding the DSI Host core information + * @enable lp transmit in low power + */ +static inline +void dsi_hal_cmd_mode_lp_cmd_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->cmd_mode_lp_cmd_en) + ops->cmd_mode_lp_cmd_en(ctx, enable); +} +/* + * Set DCS read command packet transmission to transmission type + * @dsi pointer to structure holding the DSI Host core information + * @enable lp transmit in low power + */ +static inline +void dsi_hal_video_mode_lp_cmd_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->video_mode_lp_cmd_en) + ops->video_mode_lp_cmd_en(ctx, enable); +} + +/* + * Write command header in the generic interface + * (which also sends DCS commands) as a subset + * @dsi pointer to structure holding the DSI Host core information + * @vc of destination + * @type type of DCS command + * @wc_lsb (if DCS, it is the DCS command) + * @wc_msb (only parameter of short DCS packet) + */ +static inline void dsi_hal_set_packet_header(struct sprd_dsi *dsi, + u8 vc, + u8 type, + u8 wc_lsb, + u8 wc_msb) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->set_packet_header) + ops->set_packet_header(ctx, vc, type, wc_lsb, wc_msb); +} +/* + * Write the payload of the long packet commands + * @dsi pointer to structure holding the DSI Host core information + * @payload array of bytes of payload + */ +static inline +void dsi_hal_set_packet_payload(struct sprd_dsi *dsi, u32 payload) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->set_packet_payload) + ops->set_packet_payload(ctx, payload); +} +/* + * Write the payload of the long packet commands + * @dsi pointer to structure holding the DSI Host core information + * @return 32-bit data to hold read information + */ +static inline u32 dsi_hal_get_rx_payload(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->get_rx_payload) + return ops->get_rx_payload(ctx); + + return 0; +} + +/* + * Enable Bus Turn-around request + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_bta_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->bta_en) + ops->bta_en(ctx, enable); +} +/* + * Enable EOTp reception + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_eotp_rx_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->eotp_rx_en) + ops->eotp_rx_en(ctx, enable); +} +/* + * Enable EOTp transmission + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_eotp_tx_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->eotp_tx_en) + ops->eotp_tx_en(ctx, enable); +} +/* + * Enable ECC reception, error correction and reporting + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_ecc_rx_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->ecc_rx_en) + ops->ecc_rx_en(ctx, enable); +} +/* + * Enable CRC reception, error reporting + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_crc_rx_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->crc_rx_en) + ops->crc_rx_en(ctx, enable); +} +/* + * Get status of read command + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if bta was returned + */ +static inline bool dsi_hal_is_bta_returned(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_bta_returned) + return ops->is_bta_returned(ctx); + + return true; +} +/* + * Get the FULL status of generic read payload fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static inline bool dsi_hal_is_rx_payload_fifo_full(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_rx_payload_fifo_full) + return ops->is_rx_payload_fifo_full(ctx); + + return false; +} +/* + * Get the EMPTY status of generic read payload fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static inline bool dsi_hal_is_rx_payload_fifo_empty(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_rx_payload_fifo_empty) + return ops->is_rx_payload_fifo_empty(ctx); + + return true; +} +/* + * Get the FULL status of generic write payload fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static inline bool dsi_hal_is_tx_payload_fifo_full(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_tx_payload_fifo_full) + return ops->is_tx_payload_fifo_full(ctx); + + return false; +} +/* + * Get the EMPTY status of generic write payload fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static inline bool dsi_hal_is_tx_payload_fifo_empty(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_tx_payload_fifo_empty) + return ops->is_tx_payload_fifo_empty(ctx); + + return true; +} +/* + * Get the FULL status of generic command fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo full + */ +static inline bool dsi_hal_is_tx_cmd_fifo_full(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_tx_cmd_fifo_full) + return ops->is_tx_cmd_fifo_full(ctx); + + return false; +} +/* + * Get the EMPTY status of generic command fifo + * @dsi pointer to structure holding the DSI Host core information + * @return 1 if fifo empty + */ +static inline bool dsi_hal_is_tx_cmd_fifo_empty(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->is_tx_cmd_fifo_empty) + return ops->is_tx_cmd_fifo_empty(ctx); + + return true; +} + +static inline +bool dsi_hal_wait_tx_payload_fifo_empty(struct sprd_dsi *dsi) +{ + int timeout; + + for (timeout = 0; timeout < 5000; timeout++) { + if (dsi_hal_is_tx_payload_fifo_empty(dsi)) + return true; + udelay(1); + } + + pr_err("tx payload fifo is not empty\n"); + return false; +} + +static inline bool dsi_hal_wait_tx_cmd_fifo_empty(struct sprd_dsi *dsi) +{ + int timeout; + + for (timeout = 0; timeout < 5000; timeout++) { + if (dsi_hal_is_tx_cmd_fifo_empty(dsi)) + return true; + udelay(1); + } + + pr_err("tx cmd fifo is not empty\n"); + return false; +} + +static inline bool dsi_hal_wait_rd_resp_completed(struct sprd_dsi *dsi) +{ + int timeout; + + for (timeout = 0; timeout < 10000; timeout++) { + udelay(10); + if (dsi_hal_is_bta_returned(dsi)) + return true; + } + + pr_err("wait read response time out\n"); + return false; +} + +/* only if DPI */ +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch data lane from high speed to low power + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_datalane_hs2lp_config(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->datalane_hs2lp_config) + ops->datalane_hs2lp_config(ctx, byte_cycle); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch the data lane from to low power high speed + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_datalane_lp2hs_config(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->datalane_lp2hs_config) + ops->datalane_lp2hs_config(ctx, byte_cycle); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch clock lane from high speed to low power + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_clklane_hs2lp_config(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->clklane_hs2lp_config) + ops->clklane_hs2lp_config(ctx, byte_cycle); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to switch clock lane from to low power high speed + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_clklane_lp2hs_config(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->clklane_lp2hs_config) + ops->clklane_lp2hs_config(ctx, byte_cycle); +} +/* + * Configure how many cycles of byte clock would the PHY module take + * to turn the bus around to start receiving + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_max_read_time(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->max_read_time) + ops->max_read_time(ctx, byte_cycle); +} +/* + * Enable the automatic mechanism to stop providing clock in the clock + * lane when time allows + * @dsi pointer to structure holding the DSI Host core information + * @enable + */ +static inline void dsi_hal_nc_clk_en(struct sprd_dsi *dsi, int enable) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->nc_clk_en) + ops->nc_clk_en(ctx, enable); +} +/* + * Write transmission escape timeout + * a safe guard so that the state machine would reset if transmission + * takes too long + * @dsi pointer to structure holding the DSI Host core information + * @div escape clk division + */ +static inline void dsi_hal_tx_escape_division(struct sprd_dsi *dsi, u8 div) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->tx_escape_division) + ops->tx_escape_division(ctx, div); +} +/* PRESP Time outs */ +/* + * configure timeout divisions (so they would have more clock ticks) + * @dsi pointer to structure holding the DSI Host core information + * @div no of hs cycles before transiting back to LP in + * (lane_clk / byte_clk_division_factor) + */ +static inline +void dsi_hal_timeout_clock_division(struct sprd_dsi *dsi, u8 div) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->timeout_clock_division) + ops->timeout_clock_division(ctx, div); +} +/* + * Configure the Low power receive time out + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle count of byte cycles + */ +static inline +void dsi_hal_lp_rx_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->lp_rx_timeout) + ops->lp_rx_timeout(ctx, byte_cycle); +} +/* + * Configure a high speed transmission time out + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle + */ +static inline +void dsi_hal_hs_tx_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->hs_tx_timeout) + ops->hs_tx_timeout(ctx, byte_cycle); +} +/* + * Timeout for peripheral (for controller to stay still) after bus turn around + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle period for which the DWC_mipi_dsi_hal_host keeps + * the link still, after sending a BTA operation. This period is + * measured in cycles of lanebyteclk + */ +static inline +void dsi_hal_bta_presp_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->bta_presp_timeout) + ops->bta_presp_timeout(ctx, byte_cycle); +} +/* + * Timeout for peripheral (for controller to stay still) after LP data + * transmission write requests + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle period for which the DWC_mipi_dsi_hal_host keeps + * the link still, after sending a low power write operation. This period is + * measured in cycles of lanebyteclk + */ +static inline +void dsi_hal_lp_write_presp_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->lp_write_presp_timeout) + ops->lp_write_presp_timeout(ctx, byte_cycle); +} +/* + * Timeout for peripheral (for controller to stay still) after LP data + * transmission read requests + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle period for which the DWC_mipi_dsi_hal_host keeps + * the link still, after sending a low power read operation. This period is + * measured in cycles of lanebyteclk + */ +static inline +void dsi_hal_lp_read_presp_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->lp_read_presp_timeout) + ops->lp_read_presp_timeout(ctx, byte_cycle); +} +/* + * Timeout for peripheral (for controller to stay still) after HS data + * transmission write requests + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle period for which the DWC_mipi_dsi_hal_host keeps + * the link still, after sending a high-speed write operation. This period is + * measured in cycles of lanebyteclk + */ +static inline +void dsi_hal_hs_write_presp_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->hs_write_presp_timeout) + ops->hs_write_presp_timeout(ctx, byte_cycle); +} +/* + * Timeout for peripheral between HS data transmission read requests + * @dsi pointer to structure holding the DSI Host core information + * @byte_cycle period for which the DWC_mipi_dsi_hal_host keeps + * the link still, after sending a high-speed read operation. This period is + * measured in cycles of lanebyteclk + */ +static inline +void dsi_hal_hs_read_presp_timeout(struct sprd_dsi *dsi, u16 byte_cycle) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->hs_read_presp_timeout) + ops->hs_read_presp_timeout(ctx, byte_cycle); +} +/* + * Get the error 0 interrupt register status + * @dsi pointer to structure holding the DSI Host core information + * @return error status 0 value + */ +static inline u32 dsi_hal_int0_status(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int0_status) + return ops->int0_status(ctx); + + return 0; +} +/* + * Get the error 1 interrupt register status + * @dsi pointer to structure holding the DSI Host core information + * @return error status 1 value + */ +static inline u32 dsi_hal_int1_status(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int1_status) + return ops->int1_status(ctx); + + return 0; +} +/* + * Get the error 2 interrupt register status + * @dsi pointer to structure holding the DSI Host core information + * @return error status 2 value + */ +static inline u32 dsi_hal_int2_status(struct sprd_dsi *dsi) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int2_status) + return ops->int2_status(ctx); + + return 0; +} +/* + * Configure MASK (hiding) of interrupts coming from error 0 source + * @dsi pointer to structure holding the DSI Host core information + * @mask to be written to the register + */ +static inline void dsi_hal_int0_mask(struct sprd_dsi *dsi, u32 mask) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int0_mask) + ops->int0_mask(ctx, mask); +} +/* + * Configure MASK (hiding) of interrupts coming from error 0 source + * @dsi pointer to structure holding the DSI Host core information + * @mask the mask to be written to the register + */ +static inline void dsi_hal_int1_mask(struct sprd_dsi *dsi, u32 mask) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int1_mask) + ops->int1_mask(ctx, mask); +} +/* + * Configure MASK (hiding) of interrupts coming from error 0 source + * @dsi pointer to structure holding the DSI Host core information + * @mask the mask to be written to the register + */ +static inline void dsi_hal_int2_mask(struct sprd_dsi *dsi, u32 mask) +{ + struct dsi_core_ops *ops = dsi->core; + struct dsi_context *ctx = &dsi->ctx; + + if (ops->int2_mask) + ops->int2_mask(ctx, mask); +} + +#endif /* MIPI_DSI_HAL_H_ */ diff --git a/drivers/gpu/drm/sprd/sprd_dphy.c b/drivers/gpu/drm/sprd/sprd_dphy.c new file mode 100644 index 0000000..7a12a80 --- /dev/null +++ b/drivers/gpu/drm/sprd/sprd_dphy.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sprd_dphy.h" + +static int regmap_tst_io_write(void *context, u32 reg, u32 val) +{ + struct sprd_dphy *dphy = context; + + if (val > 0xff || reg > 0xff) + return -EINVAL; + + pr_debug("reg = 0x%02x, val = 0x%02x\n", reg, val); + + sprd_dphy_test_write(dphy, reg, val); + + return 0; +} + +static int regmap_tst_io_read(void *context, u32 reg, u32 *val) +{ + struct sprd_dphy *dphy = context; + int ret; + + if (reg > 0xff) + return -EINVAL; + + ret = sprd_dphy_test_read(dphy, reg); + if (ret < 0) + return ret; + + *val = ret; + + pr_debug("reg = 0x%02x, val = 0x%02x\n", reg, *val); + return 0; +} + +static struct regmap_bus regmap_tst_io = { + .reg_write = regmap_tst_io_write, + .reg_read = regmap_tst_io_read, +}; + +static const struct regmap_config byte_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static const struct regmap_config word_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int sprd_dphy_regmap_init(struct sprd_dphy *dphy) +{ + struct dphy_context *ctx = &dphy->ctx; + struct regmap *regmap; + + if (ctx->apbbase) + regmap = devm_regmap_init_mmio(&dphy->dev, + (void __iomem *)ctx->apbbase, &word_config); + else + regmap = devm_regmap_init(&dphy->dev, ®map_tst_io, + dphy, &byte_config); + + if (IS_ERR(regmap)) { + DRM_ERROR("dphy regmap init failed\n"); + return PTR_ERR(regmap); + } + + ctx->regmap = regmap; + + return 0; +} + +void sprd_dphy_ulps_enter(struct sprd_dphy *dphy) +{ + DRM_INFO("dphy ulps enter\n"); + sprd_dphy_hs_clk_en(dphy, false); + sprd_dphy_data_ulps_enter(dphy); + sprd_dphy_clk_ulps_enter(dphy); +} + +void sprd_dphy_ulps_exit(struct sprd_dphy *dphy) +{ + DRM_INFO("dphy ulps exit\n"); + sprd_dphy_force_pll(dphy, true); + sprd_dphy_clk_ulps_exit(dphy); + sprd_dphy_data_ulps_exit(dphy); + sprd_dphy_force_pll(dphy, false); +} + +int sprd_dphy_resume(struct sprd_dphy *dphy) +{ + int ret; + + ret = sprd_dphy_configure(dphy); + if (ret) { + DRM_ERROR("sprd dphy init failed\n"); + return -EINVAL; + } + + DRM_INFO("dphy resume OK\n"); + return ret; +} + +int sprd_dphy_suspend(struct sprd_dphy *dphy) +{ + int ret; + + ret = sprd_dphy_close(dphy); + if (ret) + DRM_ERROR("sprd dphy close failed\n"); + + DRM_INFO("dphy suspend OK\n"); + return ret; +} + +static int sprd_dphy_context_init(struct sprd_dphy *dphy, + struct device_node *np) +{ + struct resource r; + + if (!of_address_to_resource(np, 0, &r)) { + dphy->ctx.ctrlbase = (unsigned long) + ioremap_nocache(r.start, resource_size(&r)); + if (dphy->ctx.ctrlbase == 0) { + DRM_ERROR("dphy ctrlbase ioremap failed\n"); + return -EFAULT; + } + } else { + DRM_ERROR("parse dphy ctrl reg base failed\n"); + return -EINVAL; + } + + if (!of_address_to_resource(np, 1, &r)) { + DRM_INFO("this dphy has apb reg base\n"); + dphy->ctx.apbbase = (unsigned long) + ioremap_nocache(r.start, resource_size(&r)); + if (dphy->ctx.apbbase == 0) { + DRM_ERROR("dphy apbbase ioremap failed\n"); + return -EFAULT; + } + } + + return 0; +} + +static const struct dphy_ops sharkl3_dphy = { + .ppi = &dsi_ctrl_ppi_ops, + .pll = &sharkle_dphy_pll_ops, +}; + +static const struct of_device_id dphy_match_table[] = { + { .compatible = "sprd,sharkl3-dsi-phy", + .data = &sharkl3_dphy }, + { }, +}; + +static int sprd_dphy_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_node(dphy_match_table, np); + const struct dphy_ops *pdata; + struct sprd_dphy *dphy; + struct device *dsi_dev; + int ret; + + dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL); + if (!dphy) + return -ENOMEM; + + dsi_dev = sprd_disp_pipe_get_input(&pdev->dev); + if (!dsi_dev) + return -ENODEV; + + pdata = of_device_get_match_data(&pdev->dev); + if (pdata) { + dphy->ppi = pdata->ppi; + dphy->pll = pdata->pll; + } else { + DRM_ERROR("Can't get %s ops data\n", of_id->name); + return -EINVAL; + } + + ret = sprd_dphy_context_init(dphy, pdev->dev.of_node); + if (ret) + return ret; + + sprd_dphy_regmap_init(dphy); + platform_set_drvdata(pdev, dphy); + + DRM_INFO("dphy driver probe success\n"); + + return 0; +} + +struct platform_driver sprd_dphy_driver = { + .probe = sprd_dphy_probe, + .driver = { + .name = "sprd-dphy-drv", + .of_match_table = dphy_match_table, + } +}; + +MODULE_AUTHOR("Leon He "); +MODULE_AUTHOR("Kevin Tang "); +MODULE_DESCRIPTION("Unisoc SoC MIPI DSI PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/sprd/sprd_dphy.h b/drivers/gpu/drm/sprd/sprd_dphy.h new file mode 100644 index 0000000..d51fe47 --- /dev/null +++ b/drivers/gpu/drm/sprd/sprd_dphy.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#ifndef _SPRD_DPHY_H_ +#define _SPRD_DPHY_H_ + +#include +#include +#include +#include +#include + +#include + +#include "disp_lib.h" + +struct dphy_context { + struct regmap *regmap; + unsigned long ctrlbase; + unsigned long apbbase; + u32 freq; + u8 lanes; +}; + +struct dphy_pll_ops { + int (*pll_config)(struct dphy_context *ctx); + int (*timing_config)(struct dphy_context *ctx); + int (*hop_config)(struct dphy_context *ctx, int delta, int period); + int (*ssc_en)(struct dphy_context *ctx, bool en); + void (*force_pll)(struct dphy_context *ctx, int force); +}; + +struct dphy_ppi_ops { + void (*rstz)(struct dphy_context *ctx, int level); + void (*shutdownz)(struct dphy_context *ctx, int level); + void (*force_pll)(struct dphy_context *ctx, int force); + void (*clklane_ulps_rqst)(struct dphy_context *ctx, int en); + void (*clklane_ulps_exit)(struct dphy_context *ctx, int en); + void (*datalane_ulps_rqst)(struct dphy_context *ctx, int en); + void (*datalane_ulps_exit)(struct dphy_context *ctx, int en); + void (*stop_wait_time)(struct dphy_context *ctx, u8 byte_clk); + void (*datalane_en)(struct dphy_context *ctx); + void (*clklane_en)(struct dphy_context *ctx, int en); + void (*clk_hs_rqst)(struct dphy_context *ctx, int en); + u8 (*is_rx_direction)(struct dphy_context *ctx); + u8 (*is_pll_locked)(struct dphy_context *ctx); + u8 (*is_rx_ulps_esc_lane0)(struct dphy_context *ctx); + u8 (*is_stop_state_clklane)(struct dphy_context *ctx); + u8 (*is_stop_state_datalane)(struct dphy_context *ctx); + u8 (*is_ulps_active_datalane)(struct dphy_context *ctx); + u8 (*is_ulps_active_clklane)(struct dphy_context *ctx); + void (*tst_clk)(struct dphy_context *ctx, u8 level); + void (*tst_clr)(struct dphy_context *ctx, u8 level); + void (*tst_en)(struct dphy_context *ctx, u8 level); + u8 (*tst_dout)(struct dphy_context *ctx); + void (*tst_din)(struct dphy_context *ctx, u8 data); + void (*bist_en)(struct dphy_context *ctx, int en); + u8 (*is_bist_ok)(struct dphy_context *ctx); +}; + +struct dphy_ops { + struct dphy_ppi_ops *ppi; + struct dphy_pll_ops *pll; +}; + +struct sprd_dphy { + struct device dev; + struct dphy_context ctx; + struct dphy_ppi_ops *ppi; + struct dphy_pll_ops *pll; +}; + +extern struct dphy_ppi_ops dsi_ctrl_ppi_ops; +extern struct dphy_pll_ops sharkle_dphy_pll_ops; +extern struct dphy_glb_ops sharkl3_dphy_glb_ops; + +void sprd_dphy_ulps_enter(struct sprd_dphy *dphy); +void sprd_dphy_ulps_exit(struct sprd_dphy *dphy); +int sprd_dphy_resume(struct sprd_dphy *dphy); +int sprd_dphy_suspend(struct sprd_dphy *dphy); + +int sprd_dphy_configure(struct sprd_dphy *dphy); +void sprd_dphy_reset(struct sprd_dphy *dphy); +void sprd_dphy_shutdown(struct sprd_dphy *dphy); +int sprd_dphy_hop_config(struct sprd_dphy *dphy, int delta, int period); +int sprd_dphy_ssc_en(struct sprd_dphy *dphy, bool en); +int sprd_dphy_close(struct sprd_dphy *dphy); +int sprd_dphy_data_ulps_enter(struct sprd_dphy *dphy); +int sprd_dphy_data_ulps_exit(struct sprd_dphy *dphy); +int sprd_dphy_clk_ulps_enter(struct sprd_dphy *dphy); +int sprd_dphy_clk_ulps_exit(struct sprd_dphy *dphy); +void sprd_dphy_force_pll(struct sprd_dphy *dphy, bool enable); +void sprd_dphy_hs_clk_en(struct sprd_dphy *dphy, bool enable); +void sprd_dphy_test_write(struct sprd_dphy *dphy, u8 address, u8 data); +u8 sprd_dphy_test_read(struct sprd_dphy *dphy, u8 address); + +#endif /* _SPRD_DPHY_H_ */ diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c index 6308285..77ee4b8 100644 --- a/drivers/gpu/drm/sprd/sprd_drm.c +++ b/drivers/gpu/drm/sprd/sprd_drm.c @@ -267,6 +267,8 @@ static struct platform_driver sprd_drm_driver = { static struct platform_driver *sprd_drm_drivers[] = { &sprd_drm_driver, &sprd_dpu_driver, + &sprd_dsi_driver, + &sprd_dphy_driver, }; static int __init sprd_drm_init(void) diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h index 91b88c8..828d956 100644 --- a/drivers/gpu/drm/sprd/sprd_drm.h +++ b/drivers/gpu/drm/sprd/sprd_drm.h @@ -14,5 +14,7 @@ struct sprd_drm { }; extern struct platform_driver sprd_dpu_driver; +extern struct platform_driver sprd_dsi_driver; +extern struct platform_driver sprd_dphy_driver; #endif /* _SPRD_DRM_H_ */ diff --git a/drivers/gpu/drm/sprd/sprd_dsi.c b/drivers/gpu/drm/sprd/sprd_dsi.c new file mode 100644 index 0000000..45c53ab00 --- /dev/null +++ b/drivers/gpu/drm/sprd/sprd_dsi.c @@ -0,0 +1,655 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Unisoc Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include