From patchwork Mon Mar 9 13:26:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kiran Gunda X-Patchwork-Id: 11428651 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B60BB139A for ; Tue, 10 Mar 2020 08:19:55 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 937A82467D for ; Tue, 10 Mar 2020 08:19:55 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="mDAi0GjC" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 937A82467D Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id E66D46E830; Tue, 10 Mar 2020 08:19:14 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail26.static.mailgun.info (mail26.static.mailgun.info [104.130.122.26]) by gabe.freedesktop.org (Postfix) with ESMTPS id 97CAB6E442 for ; Mon, 9 Mar 2020 13:27:06 +0000 (UTC) DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1583760430; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=lxLnYOmMvUrcqbThx464z1K9eEP+ObKbjKctpD949EQ=; b=mDAi0GjCzBYBTy74Y0zJsmfeegQDG1YhljO4zdsrg8GYNKXirZcdrARCYG2MVbR4JTfaWrfi 33aM4xw/pq8pXTEJiCEjcLW+NkKWTMIf083udJKL1033eomc2J9jua/7X2z7ry/0uLnWlUbI FUA1YMzt/BjjbzWdfwHkZr9TLVk= X-Mailgun-Sending-Ip: 104.130.122.26 X-Mailgun-Sid: WyJkOTU5ZSIsICJkcmktZGV2ZWxAbGlzdHMuZnJlZWRlc2t0b3Aub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e66441d.7efd28a2e0d8-smtp-out-n02; Mon, 09 Mar 2020 13:26:53 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 904E8C4478F; Mon, 9 Mar 2020 13:26:52 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from kgunda-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: kgunda) by smtp.codeaurora.org (Postfix) with ESMTPSA id F0A49C43637; Mon, 9 Mar 2020 13:26:44 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org F0A49C43637 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=kgunda@codeaurora.org From: Kiran Gunda To: bjorn.andersson@linaro.org, jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy , Andy Gross , linux-arm-msm@vger.kernel.org, linux-fbdev@vger.kernel.org Subject: [PATCH V3 3/4] backlight: qcom-wled: Add support for WLED5 peripheral in PM8150L Date: Mon, 9 Mar 2020 18:56:01 +0530 Message-Id: <1583760362-26978-4-git-send-email-kgunda@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1583760362-26978-1-git-send-email-kgunda@codeaurora.org> References: <1583760362-26978-1-git-send-email-kgunda@codeaurora.org> X-Mailman-Approved-At: Tue, 10 Mar 2020 08:19:04 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Kiran Gunda MIME-Version: 1.0 Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Add support for WLED5 peripheral that is present on PM8150L PMICs. PM8150L WLED supports the following: - Two modulators and each sink can use any of the modulator - Multiple CABC selection options - Multiple brightness width selection (12 bits to 15 bits) Signed-off-by: Kiran Gunda --- .../bindings/leds/backlight/qcom-wled.yaml | 39 +++ drivers/video/backlight/qcom-wled.c | 336 ++++++++++++++++++++- 2 files changed, 374 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index d334f81..e0dadc4 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -20,6 +20,7 @@ properties: - qcom,pm8941-wled - qcom,pmi8998-wled - qcom,pm660l-wled + - qcom,pm8150l-wled reg: maxItems: 1 @@ -28,10 +29,23 @@ properties: maxItems: 1 description: brightness value on boot, value from 0-4095. + For pm8150l this value vary from 0-4095 or 0-32767 + depending on the brightness control mode. If CABC is + enabled 0-4095 range is used. allOf: - $ref: /schemas/types.yaml#/definitions/uint32 default: 2048 + max-brightness: + maxItems: 1 + description: + Maximum brightness level. Allowed values are, + for pmi8998 it is 0-4095. + For pm8150l, this can be either 4095 or 32767. + If CABC is enabled, this is capped to 4095. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + label: maxItems: 1 description: @@ -124,6 +138,31 @@ properties: value for PM8941 from 1 to 3. Default 2 For PMI8998 from 1 to 4. + qcom,modulator-sel: + maxItems: 1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the modulator used for brightness modulation. + Allowed values are, + 0 - Modulator A + 1 - Modulator B + If not specified, then modulator A will be used by default. + This property is applicable only to WLED5 peripheral. + + qcom,cabc-sel: + maxItems: 1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the CABC pin signal used for brightness modulation. + Allowed values are, + 0 - CABC disabled + 1 - CABC 1 + 2 - CABC 2 + 3 - External signal (e.g. LPG) is used for dimming + This property is applicable only to WLED5 peripheral. + interrupts: maxItems: 2 description: diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index b73f273..edbbcb2 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -19,6 +19,8 @@ #define WLED_DEFAULT_BRIGHTNESS 2048 #define WLED_SOFT_START_DLY_US 10000 #define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_12B 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_15B 0x7FFF /* WLED3/WLED4 control registers */ #define WLED3_CTRL_REG_FAULT_STATUS 0x08 @@ -40,6 +42,7 @@ #define WLED3_CTRL_REG_OVP 0x4d #define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED5_CTRL_REG_OVP_MASK GENMASK(3, 0) #define WLED3_CTRL_REG_ILIMIT 0x4e #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) @@ -101,6 +104,40 @@ #define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) +/* WLED5 specific sink registers */ +#define WLED5_SINK_REG_MOD_A_EN 0x50 +#define WLED5_SINK_REG_MOD_B_EN 0x60 +#define WLED5_SINK_REG_MOD_EN_MASK BIT(7) + +#define WLED5_SINK_REG_MOD_A_SRC_SEL 0x51 +#define WLED5_SINK_REG_MOD_B_SRC_SEL 0x61 +#define WLED5_SINK_REG_MOD_SRC_SEL_HIGH 0 +#define WLED5_SINK_REG_MOD_SRC_SEL_EXT 0x03 +#define WLED5_SINK_REG_MOD_SRC_SEL_MASK GENMASK(1, 0) + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL 0x52 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL 0x62 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B 0 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B 1 + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB 0x53 +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB 0x54 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB 0x63 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB 0x64 + +#define WLED5_SINK_REG_MOD_SYNC_BIT 0x65 +#define WLED5_SINK_REG_SYNC_MOD_A_BIT BIT(0) +#define WLED5_SINK_REG_SYNC_MOD_B_BIT BIT(1) +#define WLED5_SINK_REG_SYNC_MASK GENMASK(1, 0) + +/* WLED5 specific per-'string' registers below */ +#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n) (0x72 + (n * 0x10)) + +#define WLED5_SINK_REG_STR_SRC_SEL(n) (0x73 + (n * 0x10)) +#define WLED5_SINK_REG_SRC_SEL_MOD_A 0 +#define WLED5_SINK_REG_SRC_SEL_MOD_B 1 +#define WLED5_SINK_REG_SRC_SEL_MASK GENMASK(1, 0) + struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); @@ -125,6 +162,8 @@ struct wled_config { u32 num_strings; u32 string_i_limit; u32 enabled_strings[WLED_MAX_STRINGS]; + u32 mod_sel; + u32 cabc_sel; bool cs_out_en; bool ext_gen; bool cabc; @@ -164,6 +203,27 @@ struct wled { int (*wled_ovp_delay)(struct wled *wled); }; +enum wled5_mod_sel { + MOD_A, + MOD_B, + MOD_MAX, +}; + +static const u8 wled5_brightness_reg[MOD_MAX] = { + [MOD_A] = WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB, + [MOD_B] = WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB, +}; + +static const u8 wled5_src_sel_reg[MOD_MAX] = { + [MOD_A] = WLED5_SINK_REG_MOD_A_SRC_SEL, + [MOD_B] = WLED5_SINK_REG_MOD_B_SRC_SEL, +}; + +static const u8 wled5_brt_wid_sel_reg[MOD_MAX] = { + [MOD_A] = WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL, + [MOD_B] = WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL, +}; + static int wled3_set_brightness(struct wled *wled, u16 brightness) { int rc, i; @@ -182,6 +242,25 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness) return 0; } +static int wled5_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, offset; + u16 low_limit = wled->max_brightness * 1 / 1000; + u8 v[2]; + + /* WLED5's lower limit is 0.1% */ + if (brightness < low_limit) + brightness = low_limit; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0x7f; + + offset = wled5_brightness_reg[wled->cfg.mod_sel]; + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, + v, 2); + return rc; +} + static int wled4_set_brightness(struct wled *wled, u16 brightness) { int rc, i; @@ -244,6 +323,24 @@ static int wled_module_enable(struct wled *wled, int val) return 0; } +static int wled5_sync_toggle(struct wled *wled) +{ + int rc; + u8 val; + + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, val); + if (rc < 0) + return rc; + + return regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, 0); +} + static int wled3_sync_toggle(struct wled *wled) { int rc; @@ -345,6 +442,29 @@ static int wled_update_status(struct backlight_device *bl) return rc; } +static int wled5_cabc_config(struct wled *wled, bool enable) +{ + int rc, offset; + u8 reg; + + if (wled->cabc_disabled) + return 0; + + reg = enable ? wled->cfg.cabc_sel : 0; + offset = wled5_src_sel_reg[wled->cfg.mod_sel]; + rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset, + WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg); + if (rc < 0) { + pr_err("Error in configuring CABC rc=%d\n", rc); + return rc; + } + + if (!wled->cfg.cabc_sel) + wled->cabc_disabled = true; + + return 0; +} + static int wled4_cabc_config(struct wled *wled, bool enable) { int i, j, rc; @@ -909,6 +1029,115 @@ static const struct wled_config wled4_config_defaults = { .auto_detection_enabled = false, }; +static int wled5_setup(struct wled *wled) +{ + int rc, temp, i, j; + u8 sink_en = 0; + u16 addr; + u32 val; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_SRC_SEL_MASK, + wled->cfg.mod_sel == MOD_A ? + WLED5_SINK_REG_SRC_SEL_MOD_A : + WLED5_SINK_REG_SRC_SEL_MOD_B); + + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false); + if (rc < 0) + return rc; + + /* Enable one of the modulators A or B based on mod_sel */ + addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN; + val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + wled5_brt_wid_sel_reg[wled->cfg.mod_sel]; + val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ? + WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B : + WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B; + rc = regmap_write(wled->regmap, addr, val); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + /* This updates only FSC configuration in WLED5 */ + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + pr_err("Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + if (rc < 0) + return rc; + + return 0; +} + +static const struct wled_config wled5_config_defaults = { + .boost_i_limit = 5, + .string_i_limit = 10, + .ovp = 4, + .num_strings = 4, + .switch_freq = 11, + .mod_sel = 0, + .cabc_sel = 0, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, +}; + static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; @@ -927,6 +1156,16 @@ static const struct wled_var_cfg wled4_boost_i_limit_cfg = { .size = ARRAY_SIZE(wled4_boost_i_limit_values), }; +static inline u32 wled5_boost_i_limit_values_fn(u32 idx) +{ + return 525 + (idx * 175); +} + +static const struct wled_var_cfg wled5_boost_i_limit_cfg = { + .fn = wled5_boost_i_limit_values_fn, + .size = 8, +}; + static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; @@ -945,6 +1184,21 @@ static const struct wled_var_cfg wled4_ovp_cfg = { .size = ARRAY_SIZE(wled4_ovp_values), }; +static inline u32 wled5_ovp_values_fn(u32 idx) +{ + /* + * 0000 - 38.5 V + * 0001 - 37 V .. + * 1111 - 16 V + */ + return 38500 - (idx * 1500); +} + +static const struct wled_var_cfg wled5_ovp_cfg = { + .fn = wled5_ovp_values_fn, + .size = 16, +}; + static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; @@ -992,6 +1246,14 @@ static const struct wled_var_cfg wled4_string_cfg = { .size = 16, }; +static const struct wled_var_cfg wled5_mod_sel_cfg = { + .size = 2, +}; + +static const struct wled_var_cfg wled5_cabc_sel_cfg = { + .size = 4, +}; + static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) @@ -1068,6 +1330,44 @@ static int wled_configure(struct wled *wled) }, }; + const struct wled_u32_opts wled5_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled5_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled5_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, + .cfg = &wled4_num_strings_cfg, + }, + { + .name = "qcom,modulator-sel", + .val_ptr = &cfg->mod_sel, + .cfg = &wled5_mod_sel_cfg, + }, + { + .name = "qcom,cabc-sel", + .val_ptr = &cfg->cabc_sel, + .cfg = &wled5_cabc_sel_cfg, + }, + }; + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, @@ -1117,6 +1417,23 @@ static int wled_configure(struct wled *wled) wled->sink_addr = be32_to_cpu(*prop_addr); break; + case 5: + u32_opts = wled5_opts; + size = ARRAY_SIZE(wled5_opts); + *cfg = wled5_config_defaults; + wled->wled_set_brightness = wled5_set_brightness; + wled->wled_sync_toggle = wled5_sync_toggle; + wled->cabc_config = wled5_cabc_config; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); return -EINVAL; @@ -1270,6 +1587,10 @@ static int wled_probe(struct platform_device *pdev) if (rc) return rc; + val = WLED3_SINK_REG_BRIGHT_MAX; + of_property_read_u32(pdev->dev.of_node, "max-brightness", &val); + wled->max_brightness = val; + switch (wled->version) { case 3: wled->cfg.auto_detection_enabled = false; @@ -1289,6 +1610,18 @@ static int wled_probe(struct platform_device *pdev) } break; + case 5: + wled->has_short_detect = true; + if (wled->cfg.cabc_sel) + wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B; + + rc = wled5_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled5_setup failed\n"); + return rc; + } + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); break; @@ -1310,7 +1643,7 @@ static int wled_probe(struct platform_device *pdev) memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; + props.max_brightness = wled->max_brightness; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, &wled_ops, &props); @@ -1333,6 +1666,7 @@ static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table);