@@ -180,10 +180,12 @@ int msm_dsi_runtime_suspend(struct device *dev);
int msm_dsi_runtime_resume(struct device *dev);
int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host);
int dsi_link_clk_set_rate_v2(struct msm_dsi_host *msm_host);
+int dsi_link_clk_set_rate_6g_v2(struct msm_dsi_host *msm_host);
int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host);
int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host);
void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host);
void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host);
+void dsi_link_clk_disable_6g_v2(struct msm_dsi_host *msm_host);
int dsi_tx_buf_alloc_6g(struct msm_dsi_host *msm_host, int size);
int dsi_tx_buf_alloc_v2(struct msm_dsi_host *msm_host, int size);
void *dsi_tx_buf_get_6g(struct msm_dsi_host *msm_host);
@@ -210,9 +210,9 @@ static const struct msm_dsi_host_cfg_ops msm_dsi_6g_host_ops = {
};
static const struct msm_dsi_host_cfg_ops msm_dsi_6g_v2_host_ops = {
- .link_clk_set_rate = dsi_link_clk_set_rate_6g,
+ .link_clk_set_rate = dsi_link_clk_set_rate_6g_v2,
.link_clk_enable = dsi_link_clk_enable_6g,
- .link_clk_disable = dsi_link_clk_disable_6g,
+ .link_clk_disable = dsi_link_clk_disable_6g_v2,
.clk_init_ver = dsi_clk_init_6g_v2,
.tx_buf_alloc = dsi_tx_buf_alloc_6g,
.tx_buf_get = dsi_tx_buf_get_6g,
@@ -14,6 +14,7 @@
#include <linux/of_graph.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spinlock.h>
@@ -111,6 +112,9 @@ struct msm_dsi_host {
struct clk *pixel_clk_src;
struct clk *byte_intf_clk;
+ struct opp_table *opp;
+ bool opp_table;
+
u32 byte_clk_rate;
u32 pixel_clk_rate;
u32 esc_clk_rate;
@@ -537,6 +541,38 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
return 0;
}
+int dsi_link_clk_set_rate_6g_v2(struct msm_dsi_host *msm_host)
+{
+ int ret;
+ struct device *dev = &msm_host->pdev->dev;
+
+ DBG("Set clk rates: pclk=%d, byteclk=%d",
+ msm_host->mode->clock, msm_host->byte_clk_rate);
+
+ ret = dev_pm_opp_set_rate(dev, msm_host->byte_clk_rate);
+ if (ret) {
+ pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = clk_set_rate(msm_host->pixel_clk, msm_host->pixel_clk_rate);
+ if (ret) {
+ pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);
+ return ret;
+ }
+
+ if (msm_host->byte_intf_clk) {
+ ret = clk_set_rate(msm_host->byte_intf_clk,
+ msm_host->byte_clk_rate / 2);
+ if (ret) {
+ pr_err("%s: Failed to set rate byte intf clk, %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
int dsi_link_clk_enable_6g(struct msm_dsi_host *msm_host)
{
@@ -665,6 +701,13 @@ void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
clk_disable_unprepare(msm_host->byte_clk);
}
+void dsi_link_clk_disable_6g_v2(struct msm_dsi_host *msm_host)
+{
+ /* Drop the performance state vote */
+ dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
+ dsi_link_clk_disable_6g(msm_host);
+}
+
void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
{
clk_disable_unprepare(msm_host->pixel_clk);
@@ -1879,6 +1922,13 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
goto fail;
}
+ msm_host->opp = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+ if (IS_ERR(msm_host->opp))
+ return PTR_ERR(msm_host->opp);
+ /* OPP table is optional */
+ if (!dev_pm_opp_of_add_table(&pdev->dev))
+ msm_host->opp_table = true;
+
init_completion(&msm_host->dma_comp);
init_completion(&msm_host->video_comp);
mutex_init(&msm_host->dev_mutex);
@@ -1904,6 +1954,9 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
DBG("");
+ if (msm_host->opp_table)
+ dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
+ dev_pm_opp_put_clkname(msm_host->opp);
dsi_tx_buf_free(msm_host);
if (msm_host->workqueue) {
flush_workqueue(msm_host->workqueue);
On SDM845 DSI needs to express a perforamnce state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/msm/dsi/dsi.h | 2 ++ drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 +-- drivers/gpu/drm/msm/dsi/dsi_host.c | 53 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+), 2 deletions(-)