diff mbox series

[28/59] drm/kmb: Changed MMIO size

Message ID 1593552491-23698-29-git-send-email-anitha.chrisanthus@intel.com (mailing list archive)
State New, archived
Headers show
Series Add support for Keem Bay DRM driver | expand

Commit Message

Chrisanthus, Anitha June 30, 2020, 9:27 p.m. UTC
Also added debug messages

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
---
 drivers/gpu/drm/kmb/kmb_drv.c  | 19 +++++++++++++++++--
 drivers/gpu/drm/kmb/kmb_regs.h |  6 +++---
 2 files changed, 20 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index b1cc8ad..b4e1e50 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -49,6 +49,7 @@ 
 #include "kmb_plane.h"
 #include "kmb_dsi.h"
 
+#define DEBUG
 /*IRQ handler*/
 static irqreturn_t kmb_isr(int irq, void *arg);
 
@@ -331,18 +332,22 @@  static int kmb_drm_bind(struct device *dev)
 	struct kmb_drm_private *lcd;
 	int ret;
 
+	DRM_DEBUG("kmb_bind : ENTER\n");
 	drm = drm_dev_alloc(&kmb_driver, dev);
 	if (IS_ERR(drm))
 		return PTR_ERR(drm);
 
+	DRM_DEBUG("kmb_bind : after alloc drm\n");
 	lcd = devm_kzalloc(dev, sizeof(*lcd), GFP_KERNEL);
 	if (!lcd)
 		return -ENOMEM;
 
+	DRM_DEBUG("kmb_bind : after alloc lcd\n");
 	drm->dev_private = lcd;
 	dev_set_drvdata(dev, drm);
 
 	kmb_setup_mode_config(drm);
+	DRM_DEBUG("kmb_bind : after kmb_setup_mode_config\n");
 	ret = kmb_load(drm, 0);
 	if (ret)
 		goto err_free;
@@ -455,17 +460,27 @@  static int kmb_probe(struct platform_device *pdev)
 {
 	struct device_node *port;
 	struct component_match *match = NULL;
+	int ret;
 
 	/* there is only one output port inside each device, find it */
+	DRM_DEBUG("%s : ENTER", __func__);
+
 	port = of_graph_get_remote_node(pdev->dev.of_node, 0, 0);
+	DRM_DEBUG("%s : port = 0x%pOF\n", __func__, port);
 	if (!port)
 		return -ENODEV;
 
+	DRM_DEBUG("%s : after get_remote", __func__);
+	DRM_DEBUG("Adding component %pOF\n", port);
 	drm_of_component_match_add(&pdev->dev, &match, compare_dev, port);
+	DRM_DEBUG("%s : after get_match", __func__);
 	of_node_put(port);
 
-	return component_master_add_with_match(&pdev->dev, &kmb_master_ops,
-					       match);
+	 ret = component_master_add_with_match(&pdev->dev, &kmb_master_ops,
+					match);
+
+	DRM_DEBUG("%s : EXIT ret=%d\n", __func__, ret);
+	return ret;
 }
 
 static int kmb_remove(struct platform_device *pdev)
diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h
index bb80bc5..f8a7abf 100644
--- a/drivers/gpu/drm/kmb/kmb_regs.h
+++ b/drivers/gpu/drm/kmb/kmb_regs.h
@@ -33,9 +33,9 @@ 
 /*from Data Book section 12.11.6.1 page 4972 */
 #define LCD_BASE_ADDR                           (0x20930000)
 #define MSS_CAM_BASE_ADDR			(MIPI_BASE_ADDR + 0x10000)
-#define LCD_MMIO_SIZE				(0x10000)
-#define MIPI_MMIO_SIZE				(0x10000)
-#define MSS_CAM_MMIO_SIZE			(0x10000)
+#define LCD_MMIO_SIZE				(0x3000)
+#define MIPI_MMIO_SIZE				(0x4000)
+#define MSS_CAM_MMIO_SIZE			(0x10)
 
 /***************************************************************************
  *		   LCD controller control register defines