diff mbox series

[v9,4/5] drm/kmb: Mipi DSI part of the display driver

Message ID 1602205443-9036-5-git-send-email-anitha.chrisanthus@intel.com (mailing list archive)
State New, archived
Headers show
Series Add support for KeemBay DRM driver | expand

Commit Message

Chrisanthus, Anitha Oct. 9, 2020, 1:04 a.m. UTC
Initializes Mipi DSI and sets up connects to ADV bridge

v2: removed license text
    upclassed dev_private, removed HAVE_IRQ. (Sam)

v3: Squashed all 59 commits to one

v4: review changes from Sam Ravnborg
	renamed dev_p to kmb

v5: corrected spellings
v6: corrected checkpatch warnings
v7: review changes Sam Ravnborg and Thomas Zimmerman
	removed unnecessary logs and defines and ifdef codes (Sam)
	split dphy_init_sequence smaller (Sam)
	removed redundant checks in kmb_dsi (Sam)
	changed kmb_dsi_init to drm_bridge_connector_init and
	drm_connector_attach_encoder to bridge's connector (Sam)
v8: call drm_bridge_attach with DRM_BRIDGE_ATTACH_NO_CONNECTOR
v9: renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V)

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
---
 drivers/gpu/drm/kmb/kmb_dsi.c | 1524 +++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/kmb/kmb_dsi.h |  350 ++++++++++
 2 files changed, 1874 insertions(+)
 create mode 100644 drivers/gpu/drm/kmb/kmb_dsi.c
 create mode 100644 drivers/gpu/drm/kmb/kmb_dsi.h
diff mbox series

Patch

diff --git a/drivers/gpu/drm/kmb/kmb_dsi.c b/drivers/gpu/drm/kmb/kmb_dsi.c
new file mode 100644
index 0000000..0c00c7d
--- /dev/null
+++ b/drivers/gpu/drm/kmb/kmb_dsi.c
@@ -0,0 +1,1524 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2019-2020 Intel Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "kmb_drv.h"
+#include "kmb_dsi.h"
+#include "kmb_regs.h"
+
+static struct mipi_dsi_host *dsi_host;
+static struct mipi_dsi_device *dsi_device;
+
+/* Default setting is 1080p, 4 lanes */
+#define IMG_HEIGHT_LINES  1080
+#define IMG_WIDTH_PX      1920
+#define MIPI_TX_ACTIVE_LANES 4
+
+struct mipi_tx_frame_section_cfg mipi_tx_frame0_sect_cfg = {
+	.width_pixels = IMG_WIDTH_PX,
+	.height_lines = IMG_HEIGHT_LINES,
+	.data_type = DSI_LP_DT_PPS_RGB888_24B,
+	.data_mode = MIPI_DATA_MODE1,
+	.dma_packed = 0
+};
+
+struct mipi_tx_frame_cfg mipitx_frame0_cfg = {
+	.sections[0] = &mipi_tx_frame0_sect_cfg,
+	.sections[1] = NULL,
+	.sections[2] = NULL,
+	.sections[3] = NULL,
+	.vsync_width = 5,
+	.v_backporch = 36,
+	.v_frontporch = 4,
+	.hsync_width = 44,
+	.h_backporch = 148,
+	.h_frontporch = 88
+};
+
+struct mipi_tx_dsi_cfg mipitx_dsi_cfg = {
+	.hfp_blank_en = 0,
+	.eotp_en = 0,
+	.lpm_last_vfp_line = 0,
+	.lpm_first_vsa_line = 0,
+	.sync_pulse_eventn = DSI_VIDEO_MODE_NO_BURST_EVENT,
+	.hfp_blanking = SEND_BLANK_PACKET,
+	.hbp_blanking = SEND_BLANK_PACKET,
+	.hsa_blanking = SEND_BLANK_PACKET,
+	.v_blanking = SEND_BLANK_PACKET,
+};
+
+struct mipi_ctrl_cfg mipi_tx_init_cfg = {
+	.active_lanes = MIPI_TX_ACTIVE_LANES,
+	.lane_rate_mbps = MIPI_TX_LANE_DATA_RATE_MBPS,
+	.ref_clk_khz = MIPI_TX_REF_CLK_KHZ,
+	.cfg_clk_khz = MIPI_TX_CFG_CLK_KHZ,
+	.tx_ctrl_cfg = {
+			.frames[0] = &mipitx_frame0_cfg,
+			.frames[1] = NULL,
+			.frames[2] = NULL,
+			.frames[3] = NULL,
+			.tx_dsi_cfg = &mipitx_dsi_cfg,
+			.line_sync_pkt_en = 0,
+			.line_counter_active = 0,
+			.frame_counter_active = 0,
+			.tx_always_use_hact = 1,
+			.tx_hact_wait_stop = 1,
+			}
+};
+
+struct  mipi_hs_freq_range_cfg {
+	u16 default_bit_rate_mbps;
+	u8 hsfreqrange_code;
+};
+
+struct vco_params {
+	u32 freq;
+	u32 range;
+	u32 divider;
+};
+
+static struct vco_params vco_table[] = {
+	{52, 0x3f, 8},
+	{80, 0x39, 8},
+	{105, 0x2f, 4},
+	{160, 0x29, 4},
+	{210, 0x1f, 2},
+	{320, 0x19, 2},
+	{420, 0x0f, 1},
+	{630, 0x09, 1},
+	{1100, 0x03, 1},
+	{0xffff, 0x01, 1},
+};
+
+static struct mipi_hs_freq_range_cfg
+mipi_hs_freq_range[MIPI_DPHY_DEFAULT_BIT_RATES] = {
+	{.default_bit_rate_mbps = 80, .hsfreqrange_code = 0x00},
+	{.default_bit_rate_mbps = 90, .hsfreqrange_code = 0x10},
+	{.default_bit_rate_mbps = 100, .hsfreqrange_code = 0x20},
+	{.default_bit_rate_mbps = 110, .hsfreqrange_code = 0x30},
+	{.default_bit_rate_mbps = 120, .hsfreqrange_code = 0x01},
+	{.default_bit_rate_mbps = 130, .hsfreqrange_code = 0x11},
+	{.default_bit_rate_mbps = 140, .hsfreqrange_code = 0x21},
+	{.default_bit_rate_mbps = 150, .hsfreqrange_code = 0x31},
+	{.default_bit_rate_mbps = 160, .hsfreqrange_code = 0x02},
+	{.default_bit_rate_mbps = 170, .hsfreqrange_code = 0x12},
+	{.default_bit_rate_mbps = 180, .hsfreqrange_code = 0x22},
+	{.default_bit_rate_mbps = 190, .hsfreqrange_code = 0x32},
+	{.default_bit_rate_mbps = 205, .hsfreqrange_code = 0x03},
+	{.default_bit_rate_mbps = 220, .hsfreqrange_code = 0x13},
+	{.default_bit_rate_mbps = 235, .hsfreqrange_code = 0x23},
+	{.default_bit_rate_mbps = 250, .hsfreqrange_code = 0x33},
+	{.default_bit_rate_mbps = 275, .hsfreqrange_code = 0x04},
+	{.default_bit_rate_mbps = 300, .hsfreqrange_code = 0x14},
+	{.default_bit_rate_mbps = 325, .hsfreqrange_code = 0x25},
+	{.default_bit_rate_mbps = 350, .hsfreqrange_code = 0x35},
+	{.default_bit_rate_mbps = 400, .hsfreqrange_code = 0x05},
+	{.default_bit_rate_mbps = 450, .hsfreqrange_code = 0x16},
+	{.default_bit_rate_mbps = 500, .hsfreqrange_code = 0x26},
+	{.default_bit_rate_mbps = 550, .hsfreqrange_code = 0x37},
+	{.default_bit_rate_mbps = 600, .hsfreqrange_code = 0x07},
+	{.default_bit_rate_mbps = 650, .hsfreqrange_code = 0x18},
+	{.default_bit_rate_mbps = 700, .hsfreqrange_code = 0x28},
+	{.default_bit_rate_mbps = 750, .hsfreqrange_code = 0x39},
+	{.default_bit_rate_mbps = 800, .hsfreqrange_code = 0x09},
+	{.default_bit_rate_mbps = 850, .hsfreqrange_code = 0x19},
+	{.default_bit_rate_mbps = 900, .hsfreqrange_code = 0x29},
+	{.default_bit_rate_mbps = 1000, .hsfreqrange_code = 0x0A},
+	{.default_bit_rate_mbps = 1050, .hsfreqrange_code = 0x1A},
+	{.default_bit_rate_mbps = 1100, .hsfreqrange_code = 0x2A},
+	{.default_bit_rate_mbps = 1150, .hsfreqrange_code = 0x3B},
+	{.default_bit_rate_mbps = 1200, .hsfreqrange_code = 0x0B},
+	{.default_bit_rate_mbps = 1250, .hsfreqrange_code = 0x1B},
+	{.default_bit_rate_mbps = 1300, .hsfreqrange_code = 0x2B},
+	{.default_bit_rate_mbps = 1350, .hsfreqrange_code = 0x3C},
+	{.default_bit_rate_mbps = 1400, .hsfreqrange_code = 0x0C},
+	{.default_bit_rate_mbps = 1450, .hsfreqrange_code = 0x1C},
+	{.default_bit_rate_mbps = 1500, .hsfreqrange_code = 0x2C},
+	{.default_bit_rate_mbps = 1550, .hsfreqrange_code = 0x3D},
+	{.default_bit_rate_mbps = 1600, .hsfreqrange_code = 0x0D},
+	{.default_bit_rate_mbps = 1650, .hsfreqrange_code = 0x1D},
+	{.default_bit_rate_mbps = 1700, .hsfreqrange_code = 0x2E},
+	{.default_bit_rate_mbps = 1750, .hsfreqrange_code = 0x3E},
+	{.default_bit_rate_mbps = 1800, .hsfreqrange_code = 0x0E},
+	{.default_bit_rate_mbps = 1850, .hsfreqrange_code = 0x1E},
+	{.default_bit_rate_mbps = 1900, .hsfreqrange_code = 0x2F},
+	{.default_bit_rate_mbps = 1950, .hsfreqrange_code = 0x3F},
+	{.default_bit_rate_mbps = 2000, .hsfreqrange_code = 0x0F},
+	{.default_bit_rate_mbps = 2050, .hsfreqrange_code = 0x40},
+	{.default_bit_rate_mbps = 2100, .hsfreqrange_code = 0x41},
+	{.default_bit_rate_mbps = 2150, .hsfreqrange_code = 0x42},
+	{.default_bit_rate_mbps = 2200, .hsfreqrange_code = 0x43},
+	{.default_bit_rate_mbps = 2250, .hsfreqrange_code = 0x44},
+	{.default_bit_rate_mbps = 2300, .hsfreqrange_code = 0x45},
+	{.default_bit_rate_mbps = 2350, .hsfreqrange_code = 0x46},
+	{.default_bit_rate_mbps = 2400, .hsfreqrange_code = 0x47},
+	{.default_bit_rate_mbps = 2450, .hsfreqrange_code = 0x48},
+	{.default_bit_rate_mbps = 2500, .hsfreqrange_code = 0x49}
+};
+
+static enum drm_mode_status
+kmb_dsi_mode_valid(struct drm_connector *connector,
+		   struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+
+	if (mode->hdisplay < mode_config->min_width ||
+	    mode->hdisplay > mode_config->max_width)
+		return MODE_BAD_HVALUE;
+
+	if (mode->vdisplay < mode_config->min_height ||
+	    mode->vdisplay > mode_config->max_height)
+		return MODE_BAD_VVALUE;
+
+	return MODE_OK;
+}
+
+static int kmb_dsi_get_modes(struct drm_connector *connector)
+{
+	int num_modes = 0;
+
+	num_modes = drm_add_modes_noedid(connector,
+					 connector->dev->mode_config.max_width,
+			 connector->dev->mode_config.max_height);
+
+	DRM_INFO("width=%d height=%d\n",
+		 connector->dev->mode_config.max_width,
+		 connector->dev->mode_config.max_height);
+	DRM_INFO("num modes=%d\n", num_modes);
+
+	return num_modes;
+}
+
+void kmb_dsi_host_unregister(void)
+{
+	mipi_dsi_host_unregister(dsi_host);
+	kfree(dsi_host);
+}
+
+static void kmb_dsi_connector_destroy(struct drm_connector *connector)
+{
+	struct kmb_connector *kmb_connector = to_kmb_connector(connector);
+
+	drm_connector_cleanup(connector);
+	kfree(kmb_connector);
+}
+
+static void kmb_dsi_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct kmb_dsi *kmb_dsi = to_kmb_dsi(encoder);
+
+	if (!kmb_dsi)
+		return;
+
+	kfree(kmb_dsi->dsi_host);
+
+	drm_encoder_cleanup(encoder);
+
+	kfree(kmb_dsi);
+	if (!dsi_device)
+		kfree(dsi_device);
+}
+
+static const struct drm_encoder_funcs kmb_dsi_funcs = {
+	.destroy = kmb_dsi_encoder_destroy,
+};
+
+static const struct
+drm_connector_helper_funcs kmb_dsi_connector_helper_funcs = {
+	.get_modes = kmb_dsi_get_modes,
+	.mode_valid = kmb_dsi_mode_valid,
+};
+
+static const struct drm_connector_funcs kmb_dsi_connector_funcs = {
+	.destroy = kmb_dsi_connector_destroy,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+};
+
+static ssize_t kmb_dsi_host_transfer(struct mipi_dsi_host *host,
+				     const struct mipi_dsi_msg *msg)
+{
+	return 0;
+}
+
+static int kmb_dsi_host_attach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	return 0;
+}
+
+static int kmb_dsi_host_detach(struct mipi_dsi_host *host,
+			       struct mipi_dsi_device *dev)
+{
+	return 0;
+}
+
+static const struct mipi_dsi_host_ops kmb_dsi_host_ops = {
+	.attach = kmb_dsi_host_attach,
+	.detach = kmb_dsi_host_detach,
+	.transfer = kmb_dsi_host_transfer,
+};
+
+static struct kmb_dsi_host *kmb_dsi_host_init(struct drm_device *drm,
+					      struct kmb_dsi *kmb_dsi)
+{
+	struct kmb_dsi_host *host;
+
+	host = kzalloc(sizeof(*host), GFP_KERNEL);
+	if (!host)
+		return NULL;
+
+	host->base = dsi_host;
+	host->base->ops = &kmb_dsi_host_ops;
+	host->kmb_dsi = kmb_dsi;
+
+	host->base->dev = drm->dev;
+
+	dsi_device->host = host->base;
+	host->device = dsi_device;
+	return host;
+}
+
+struct drm_bridge *kmb_dsi_host_bridge_init(struct device *dev)
+{
+	struct drm_bridge *bridge = NULL;
+	struct device_node *encoder_node;
+
+	/* Create and register MIPI DSI host */
+	if (!dsi_host) {
+		dsi_host = kzalloc(sizeof(*dsi_host), GFP_KERNEL);
+		if (!dsi_host)
+			return ERR_PTR(-ENOMEM);
+
+		dsi_host->ops = &kmb_dsi_host_ops;
+
+		if (!dsi_device) {
+			dsi_device = kzalloc(sizeof(*dsi_device), GFP_KERNEL);
+			if (!dsi_device) {
+				kfree(dsi_host);
+				return ERR_PTR(-ENOMEM);
+			}
+		}
+
+		dsi_host->dev = dev;
+		mipi_dsi_host_register(dsi_host);
+	}
+	/* Find ADV7535 node and initialize it */
+	encoder_node = of_parse_phandle(dev->of_node, "encoder-slave", 0);
+
+	if (!encoder_node) {
+		DRM_ERROR("Failed to get bridge info from DT\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Locate drm bridge from the hdmi encoder DT node */
+	bridge = of_drm_find_bridge(encoder_node);
+	of_node_put(encoder_node);
+	if (!bridge) {
+		DRM_INFO("Wait for external bridge driver DT\n");
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+	return bridge;
+}
+
+static u32 mipi_get_datatype_params(u32 data_type, u32 data_mode,
+				    struct mipi_data_type_params *params)
+{
+	struct mipi_data_type_params data_type_param;
+
+	switch (data_type) {
+	case DSI_LP_DT_PPS_YCBCR420_12B:
+		data_type_param.size_constraint_pixels = 2;
+		data_type_param.size_constraint_bytes = 3;
+		switch (data_mode) {
+			/* Case 0 not supported according to MDK */
+		case 1:
+		case 2:
+		case 3:
+			data_type_param.pixels_per_pclk = 2;
+			data_type_param.bits_per_pclk = 24;
+			break;
+		default:
+			DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+			return -EINVAL;
+		};
+		break;
+	case DSI_LP_DT_PPS_YCBCR422_16B:
+		data_type_param.size_constraint_pixels = 2;
+		data_type_param.size_constraint_bytes = 4;
+		switch (data_mode) {
+			/* Case 0 and 1 not supported according
+			 * to MDK
+			 */
+		case 2:
+			data_type_param.pixels_per_pclk = 1;
+			data_type_param.bits_per_pclk = 16;
+			break;
+		case 3:
+			data_type_param.pixels_per_pclk = 2;
+			data_type_param.bits_per_pclk = 32;
+			break;
+		default:
+			DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+			return -EINVAL;
+		};
+		break;
+	case DSI_LP_DT_LPPS_YCBCR422_20B:
+	case DSI_LP_DT_PPS_YCBCR422_24B:
+		data_type_param.size_constraint_pixels = 2;
+		data_type_param.size_constraint_bytes = 6;
+		switch (data_mode) {
+			/* Case 0 not supported according to MDK */
+		case 1:
+		case 2:
+		case 3:
+			data_type_param.pixels_per_pclk = 1;
+			data_type_param.bits_per_pclk = 24;
+			break;
+		default:
+			DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+			return -EINVAL;
+		};
+		break;
+	case DSI_LP_DT_PPS_RGB565_16B:
+		data_type_param.size_constraint_pixels = 1;
+		data_type_param.size_constraint_bytes = 2;
+		switch (data_mode) {
+		case 0:
+		case 1:
+			data_type_param.pixels_per_pclk = 1;
+			data_type_param.bits_per_pclk = 16;
+			break;
+		case 2:
+		case 3:
+			data_type_param.pixels_per_pclk = 2;
+			data_type_param.bits_per_pclk = 32;
+			break;
+		default:
+			DRM_ERROR("DSI: Invalid data_mode %d\n", data_mode);
+			return -EINVAL;
+		};
+		break;
+	case DSI_LP_DT_PPS_RGB666_18B:
+		data_type_param.size_constraint_pixels = 4;
+		data_type_param.size_constraint_bytes = 9;
+		data_type_param.bits_per_pclk = 18;
+		data_type_param.pixels_per_pclk = 1;
+		break;
+	case DSI_LP_DT_LPPS_RGB666_18B:
+	case DSI_LP_DT_PPS_RGB888_24B:
+		data_type_param.size_constraint_pixels = 1;
+		data_type_param.size_constraint_bytes = 3;
+		data_type_param.bits_per_pclk = 24;
+		data_type_param.pixels_per_pclk = 1;
+		break;
+	case DSI_LP_DT_PPS_RGB101010_30B:
+		data_type_param.size_constraint_pixels = 4;
+		data_type_param.size_constraint_bytes = 15;
+		data_type_param.bits_per_pclk = 30;
+		data_type_param.pixels_per_pclk = 1;
+		break;
+	default:
+		DRM_ERROR("DSI: Invalid data_type %d\n", data_type);
+		return -EINVAL;
+	};
+
+	*params = data_type_param;
+	return 0;
+}
+
+static u32 compute_wc(u32 width_px, u8 size_constr_p, u8 size_constr_b)
+{
+	/* Calculate the word count for each long packet */
+	return (((width_px / size_constr_p) * size_constr_b) & 0xffff);
+}
+
+static u32 compute_unpacked_bytes(u32 wc, u8 bits_per_pclk)
+{
+	/* Number of PCLK cycles needed to transfer a line
+	 * with each PCLK cycle, 4 Bytes are sent through the PPL module
+	 */
+	return ((wc * 8) / bits_per_pclk) * 4;
+}
+
+static u32 mipi_tx_fg_section_cfg_regs(struct kmb_drm_private *kmb,
+				       u8 frame_id, u8 section,
+				       u32 height_lines, u32 unpacked_bytes,
+				       struct mipi_tx_frame_sect_phcfg *ph_cfg)
+{
+	u32 cfg = 0;
+	u32 ctrl_no = MIPI_CTRL6;
+	u32 reg_adr;
+
+	/* Frame section packet header */
+	/* Word count bits [15:0] */
+	cfg = (ph_cfg->wc & MIPI_TX_SECT_WC_MASK) << 0;
+
+	/* Data type (bits [21:16]) */
+	cfg |= ((ph_cfg->data_type & MIPI_TX_SECT_DT_MASK)
+		<< MIPI_TX_SECT_DT_SHIFT);
+
+	/* Virtual channel (bits [23:22]) */
+	cfg |= ((ph_cfg->vchannel & MIPI_TX_SECT_VC_MASK)
+		<< MIPI_TX_SECT_VC_SHIFT);
+
+	/* Data mode (bits [24:25]) */
+	cfg |= ((ph_cfg->data_mode & MIPI_TX_SECT_DM_MASK)
+		<< MIPI_TX_SECT_DM_SHIFT);
+	if (ph_cfg->dma_packed)
+		cfg |= MIPI_TX_SECT_DMA_PACKED;
+
+	drm_dbg(&kmb->drm,
+		"ctrl=%d frame_id=%d section=%d cfg=%x packed=%d\n",
+		  ctrl_no, frame_id, section, cfg, ph_cfg->dma_packed);
+	kmb_write_mipi(kmb,
+		       (MIPI_TXm_HS_FGn_SECTo_PH(ctrl_no, frame_id, section)),
+		       cfg);
+
+	/* Unpacked bytes */
+
+	/* There are 4 frame generators and each fg has 4 sections
+	 * There are 2 registers for unpacked bytes (# bytes each
+	 * section occupies in memory)
+	 * REG_UNPACKED_BYTES0: [15:0]-BYTES0, [31:16]-BYTES1
+	 * REG_UNPACKED_BYTES1: [15:0]-BYTES2, [31:16]-BYTES3
+	 */
+	reg_adr =
+	    MIPI_TXm_HS_FGn_SECT_UNPACKED_BYTES0(ctrl_no,
+						 frame_id) + (section / 2) * 4;
+	kmb_write_bits_mipi(kmb, reg_adr, (section % 2) * 16, 16,
+			    unpacked_bytes);
+	drm_dbg(&kmb->drm,
+		"unpacked_bytes = %d, wordcount = %d\n", unpacked_bytes,
+		  ph_cfg->wc);
+
+	/* Line config */
+	reg_adr = MIPI_TXm_HS_FGn_SECTo_LINE_CFG(ctrl_no, frame_id, section);
+	kmb_write_mipi(kmb, reg_adr, height_lines);
+	return 0;
+}
+
+static u32 mipi_tx_fg_section_cfg(struct kmb_drm_private *kmb,
+				  u8 frame_id, u8 section,
+				  struct mipi_tx_frame_section_cfg *frame_scfg,
+				  u32 *bits_per_pclk, u32 *wc)
+{
+	u32 ret = 0;
+	u32 unpacked_bytes;
+	struct mipi_data_type_params data_type_parameters;
+	struct mipi_tx_frame_sect_phcfg ph_cfg;
+
+	ret = mipi_get_datatype_params(frame_scfg->data_type,
+				       frame_scfg->data_mode,
+				       &data_type_parameters);
+	if (ret)
+		return ret;
+
+	/* Packet width has to be a multiple of the minimum packet width
+	 * (in pixels) set for each data type
+	 */
+	if (frame_scfg->width_pixels %
+	    data_type_parameters.size_constraint_pixels != 0)
+		return -EINVAL;
+
+	*wc = compute_wc(frame_scfg->width_pixels,
+			 data_type_parameters.size_constraint_pixels,
+			 data_type_parameters.size_constraint_bytes);
+	unpacked_bytes = compute_unpacked_bytes(*wc,
+						data_type_parameters.bits_per_pclk);
+	ph_cfg.wc = *wc;
+	ph_cfg.data_mode = frame_scfg->data_mode;
+	ph_cfg.data_type = frame_scfg->data_type;
+	ph_cfg.dma_packed = frame_scfg->dma_packed;
+	ph_cfg.vchannel = frame_id;
+
+	mipi_tx_fg_section_cfg_regs(kmb, frame_id, section,
+				    frame_scfg->height_lines,
+				    unpacked_bytes, &ph_cfg);
+
+	/* Caller needs bits_per_clk for additional caluclations */
+	*bits_per_pclk = data_type_parameters.bits_per_pclk;
+
+	return 0;
+}
+
+static void mipi_tx_fg_cfg_regs(struct kmb_drm_private *kmb, u8 frame_gen,
+				struct mipi_tx_frame_timing_cfg *fg_cfg)
+{
+	u32 sysclk;
+	u32 ppl_llp_ratio;
+	u32 ctrl_no = MIPI_CTRL6, reg_adr, val, offset;
+
+	/* 500 Mhz system clock minus 50 to account for the difference in
+	 * MIPI clock speed in RTL tests
+	 */
+	sysclk = kmb->sys_clk_mhz - 50;
+
+	/* PPL-Pixel Packing Layer, LLP-Low Level Protocol
+	 * Frame genartor timing parameters are clocked on the system clock,
+	 * whereas as the equivalent parameters in the LLP blocks are clocked
+	 * on LLP Tx clock from the D-PHY - BYTE clock
+	 */
+
+	/* Multiply by 1000 to maintain precision */
+	ppl_llp_ratio = ((fg_cfg->bpp / 8) * sysclk * 1000) /
+	    ((fg_cfg->lane_rate_mbps / 8) * fg_cfg->active_lanes);
+
+	drm_dbg(&kmb->drm, "ppl_llp_ratio=%d\n", ppl_llp_ratio);
+	drm_dbg(&kmb->drm, "bpp=%d sysclk=%d lane-rate=%d active-lanes=%d\n",
+		fg_cfg->bpp, sysclk, fg_cfg->lane_rate_mbps,
+		 fg_cfg->active_lanes);
+
+	/* Frame generator number of lines */
+	reg_adr = MIPI_TXm_HS_FGn_NUM_LINES(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr, fg_cfg->v_active);
+
+	/* vsync width
+	 * There are 2 registers for vsync width (VSA in lines for
+	 * channels 0-3)
+	 * REG_VSYNC_WIDTH0: [15:0]-VSA for channel0, [31:16]-VSA for channel1
+	 * REG_VSYNC_WIDTH1: [15:0]-VSA for channel2, [31:16]-VSA for channel3
+	 */
+	offset = (frame_gen % 2) * 16;
+	reg_adr = MIPI_TXm_HS_VSYNC_WIDTHn(ctrl_no, frame_gen / 2);
+	kmb_write_bits_mipi(kmb, reg_adr, offset, 16, fg_cfg->vsync_width);
+
+	/* vertical backporch (vbp) */
+	reg_adr = MIPI_TXm_HS_V_BACKPORCHESn(ctrl_no, frame_gen / 2);
+	kmb_write_bits_mipi(kmb, reg_adr, offset, 16, fg_cfg->v_backporch);
+
+	/* vertical frontporch (vfp) */
+	reg_adr = MIPI_TXm_HS_V_FRONTPORCHESn(ctrl_no, frame_gen / 2);
+	kmb_write_bits_mipi(kmb, reg_adr, offset, 16, fg_cfg->v_frontporch);
+
+	/* vertical active (vactive) */
+	reg_adr = MIPI_TXm_HS_V_ACTIVEn(ctrl_no, frame_gen / 2);
+	kmb_write_bits_mipi(kmb, reg_adr, offset, 16, fg_cfg->v_active);
+
+	/* hsync width */
+	reg_adr = MIPI_TXm_HS_HSYNC_WIDTHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr,
+		       (fg_cfg->hsync_width * ppl_llp_ratio) / 1000);
+
+	/* horizontal backporch (hbp) */
+	reg_adr = MIPI_TXm_HS_H_BACKPORCHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr,
+		       (fg_cfg->h_backporch * ppl_llp_ratio) / 1000);
+
+	/* horizontal frontporch (hfp) */
+	reg_adr = MIPI_TXm_HS_H_FRONTPORCHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr,
+		       (fg_cfg->h_frontporch * ppl_llp_ratio) / 1000);
+
+	/* horizontal active (ha) */
+	reg_adr = MIPI_TXm_HS_H_ACTIVEn(ctrl_no, frame_gen);
+
+	/* convert h_active which is wc in bytes to cycles */
+	val = (fg_cfg->h_active * sysclk * 1000) /
+	    ((fg_cfg->lane_rate_mbps / 8) * fg_cfg->active_lanes);
+	val /= 1000;
+	kmb_write_mipi(kmb, reg_adr, val);
+
+	/* llp hsync width */
+	reg_adr = MIPI_TXm_HS_LLP_HSYNC_WIDTHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr, fg_cfg->hsync_width * (fg_cfg->bpp / 8));
+
+	/* llp h backporch */
+	reg_adr = MIPI_TXm_HS_LLP_H_BACKPORCHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr, fg_cfg->h_backporch * (fg_cfg->bpp / 8));
+
+	/* llp h frontporch */
+	reg_adr = MIPI_TXm_HS_LLP_H_FRONTPORCHn(ctrl_no, frame_gen);
+	kmb_write_mipi(kmb, reg_adr,
+		       fg_cfg->h_frontporch * (fg_cfg->bpp / 8));
+}
+
+static void mipi_tx_fg_cfg(struct kmb_drm_private *kmb, u8 frame_gen,
+			   u8 active_lanes, u32 bpp, u32 wc,
+			   u32 lane_rate_mbps, struct mipi_tx_frame_cfg *fg_cfg)
+{
+	u32 i, fg_num_lines = 0;
+	struct mipi_tx_frame_timing_cfg fg_t_cfg;
+
+	/* Calculate the total frame generator number of
+	 * lines based on it's active sections
+	 */
+	for (i = 0; i < MIPI_TX_FRAME_GEN_SECTIONS; i++) {
+		if (fg_cfg->sections[i])
+			fg_num_lines += fg_cfg->sections[i]->height_lines;
+	}
+
+	fg_t_cfg.bpp = bpp;
+	fg_t_cfg.lane_rate_mbps = lane_rate_mbps;
+	fg_t_cfg.hsync_width = fg_cfg->hsync_width;
+	fg_t_cfg.h_backporch = fg_cfg->h_backporch;
+	fg_t_cfg.h_frontporch = fg_cfg->h_frontporch;
+	fg_t_cfg.h_active = wc;
+	fg_t_cfg.vsync_width = fg_cfg->vsync_width;
+	fg_t_cfg.v_backporch = fg_cfg->v_backporch;
+	fg_t_cfg.v_frontporch = fg_cfg->v_frontporch;
+	fg_t_cfg.v_active = fg_num_lines;
+	fg_t_cfg.active_lanes = active_lanes;
+
+	/* Apply frame generator timing setting */
+	mipi_tx_fg_cfg_regs(kmb, frame_gen, &fg_t_cfg);
+}
+
+static void mipi_tx_multichannel_fifo_cfg(struct kmb_drm_private *kmb,
+					  u8 active_lanes, u8 vchannel_id)
+{
+	u32 fifo_size, fifo_rthreshold;
+	u32 ctrl_no = MIPI_CTRL6;
+
+	/* Clear all mc fifo channel sizes and thresholds */
+	kmb_write_mipi(kmb, MIPI_TX_HS_MC_FIFO_CTRL_EN, 0);
+	kmb_write_mipi(kmb, MIPI_TX_HS_MC_FIFO_CHAN_ALLOC0, 0);
+	kmb_write_mipi(kmb, MIPI_TX_HS_MC_FIFO_CHAN_ALLOC1, 0);
+	kmb_write_mipi(kmb, MIPI_TX_HS_MC_FIFO_RTHRESHOLD0, 0);
+	kmb_write_mipi(kmb, MIPI_TX_HS_MC_FIFO_RTHRESHOLD1, 0);
+
+	fifo_size = ((active_lanes > MIPI_D_LANES_PER_DPHY) ?
+		     MIPI_CTRL_4LANE_MAX_MC_FIFO_LOC :
+		     MIPI_CTRL_2LANE_MAX_MC_FIFO_LOC) - 1;
+
+	/* MC fifo size for virtual channels 0-3
+	 * REG_MC_FIFO_CHAN_ALLOC0: [8:0]-channel0, [24:16]-channel1
+	 * REG_MC_FIFO_CHAN_ALLOC1: [8:0]-2, [24:16]-channel3
+	 */
+	SET_MC_FIFO_CHAN_ALLOC(kmb, ctrl_no, vchannel_id, fifo_size);
+
+	/* Set threshold to half the fifo size, actual size=size*16 */
+	fifo_rthreshold = ((fifo_size) * 8) & BIT_MASK_16;
+	SET_MC_FIFO_RTHRESHOLD(kmb, ctrl_no, vchannel_id, fifo_rthreshold);
+
+	/* Enable the MC FIFO channel corresponding to the Virtual Channel */
+	kmb_set_bit_mipi(kmb, MIPI_TXm_HS_MC_FIFO_CTRL_EN(ctrl_no),
+			 vchannel_id);
+}
+
+static void mipi_tx_ctrl_cfg(struct kmb_drm_private *kmb, u8 fg_id,
+			     struct mipi_ctrl_cfg *ctrl_cfg)
+{
+	u32 sync_cfg = 0, ctrl = 0, fg_en;
+	u32 ctrl_no = MIPI_CTRL6;
+
+	/* MIPI_TX_HS_SYNC_CFG */
+	if (ctrl_cfg->tx_ctrl_cfg.line_sync_pkt_en)
+		sync_cfg |= LINE_SYNC_PKT_ENABLE;
+	if (ctrl_cfg->tx_ctrl_cfg.frame_counter_active)
+		sync_cfg |= FRAME_COUNTER_ACTIVE;
+	if (ctrl_cfg->tx_ctrl_cfg.line_counter_active)
+		sync_cfg |= LINE_COUNTER_ACTIVE;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->v_blanking)
+		sync_cfg |= DSI_V_BLANKING;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hsa_blanking)
+		sync_cfg |= DSI_HSA_BLANKING;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hbp_blanking)
+		sync_cfg |= DSI_HBP_BLANKING;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hfp_blanking)
+		sync_cfg |= DSI_HFP_BLANKING;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->sync_pulse_eventn)
+		sync_cfg |= DSI_SYNC_PULSE_EVENTN;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->lpm_first_vsa_line)
+		sync_cfg |= DSI_LPM_FIRST_VSA_LINE;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->lpm_last_vfp_line)
+		sync_cfg |= DSI_LPM_LAST_VFP_LINE;
+
+	/* Enable frame generator */
+	fg_en = 1 << fg_id;
+	sync_cfg |= FRAME_GEN_EN(fg_en);
+
+	if (ctrl_cfg->tx_ctrl_cfg.tx_always_use_hact)
+		sync_cfg |= ALWAYS_USE_HACT(fg_en);
+	if (ctrl_cfg->tx_ctrl_cfg.tx_hact_wait_stop)
+		sync_cfg |= HACT_WAIT_STOP(fg_en);
+
+	drm_dbg(&kmb->drm, "sync_cfg=%d fg_en=%d\n", sync_cfg, fg_en);
+
+	/* MIPI_TX_HS_CTRL */
+
+	/* type:DSI, source:LCD */
+	ctrl = HS_CTRL_EN | TX_SOURCE;
+	ctrl |= LCD_VC(fg_id);
+	ctrl |= ACTIVE_LANES(ctrl_cfg->active_lanes - 1);
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->eotp_en)
+		ctrl |= DSI_EOTP_EN;
+	if (ctrl_cfg->tx_ctrl_cfg.tx_dsi_cfg->hfp_blank_en)
+		ctrl |= DSI_CMD_HFP_EN;
+
+	/*67 ns stop time */
+	ctrl |= HSEXIT_CNT(0x43);
+
+	kmb_write_mipi(kmb, MIPI_TXm_HS_SYNC_CFG(ctrl_no), sync_cfg);
+	kmb_write_mipi(kmb, MIPI_TXm_HS_CTRL(ctrl_no), ctrl);
+}
+
+static u32 mipi_tx_init_cntrl(struct kmb_drm_private *kmb,
+			      struct mipi_ctrl_cfg *ctrl_cfg)
+{
+	u32 ret = 0;
+	u8 active_vchannels = 0;
+	u8 frame_id, sect;
+	u32 bits_per_pclk = 0;
+	u32 word_count = 0;
+	struct mipi_tx_frame_cfg *frame;
+
+	/* This is the order to initialize MIPI TX:
+	 * 1. set frame section parameters
+	 * 2. set frame specific parameters
+	 * 3. connect lcd to mipi
+	 * 4. multi channel fifo cfg
+	 * 5. set mipitxcctrlcfg
+	 */
+
+	for (frame_id = 0; frame_id < 4; frame_id++) {
+		frame = ctrl_cfg->tx_ctrl_cfg.frames[frame_id];
+
+		/* Find valid frame, assume only one valid frame */
+		if (!frame)
+			continue;
+
+		/* Frame Section configuration */
+		/* TODO - assume there is only one valid section in a frame,
+		 * so bits_per_pclk and word_count are only set once
+		 */
+		for (sect = 0; sect < MIPI_CTRL_VIRTUAL_CHANNELS; sect++) {
+			if (!frame->sections[sect])
+				continue;
+
+			ret = mipi_tx_fg_section_cfg(kmb, frame_id, sect,
+						     frame->sections[sect],
+						     &bits_per_pclk,
+						     &word_count);
+			if (ret)
+				return ret;
+		}
+
+		/* Set frame specific parameters */
+		mipi_tx_fg_cfg(kmb, frame_id, ctrl_cfg->active_lanes,
+			       bits_per_pclk, word_count,
+			       ctrl_cfg->lane_rate_mbps, frame);
+
+		active_vchannels++;
+
+		/* Stop iterating as only one virtual channel
+		 * shall be used for LCD connection
+		 */
+		break;
+	}
+
+	if (active_vchannels == 0)
+		return -EINVAL;
+	/* Multi-Channel FIFO Configuration */
+	mipi_tx_multichannel_fifo_cfg(kmb, ctrl_cfg->active_lanes, frame_id);
+
+	/* Frame Generator Enable */
+	mipi_tx_ctrl_cfg(kmb, frame_id, ctrl_cfg);
+
+	return ret;
+}
+
+static void test_mode_send(struct kmb_drm_private *kmb, u32 dphy_no,
+			   u32 test_code, u32 test_data)
+{
+	/* Steps to send test code:
+	 * - set testclk HIGH
+	 * - set testdin with test code
+	 * - set testen HIGH
+	 * - set testclk LOW
+	 * - set testen LOW
+	 */
+
+	/* Set testclk high */
+	SET_DPHY_TEST_CTRL1_CLK(kmb, dphy_no);
+
+	/* Set testdin */
+	SET_TEST_DIN0_3(kmb, dphy_no, test_code);
+
+	/* Set testen high */
+	SET_DPHY_TEST_CTRL1_EN(kmb, dphy_no);
+
+	/* Set testclk low */
+	CLR_DPHY_TEST_CTRL1_CLK(kmb, dphy_no);
+
+	/* Set testen low */
+	CLR_DPHY_TEST_CTRL1_EN(kmb, dphy_no);
+
+	if (test_code) {
+		/*  Steps to send test data:
+		 * - set testen LOW
+		 * - set testclk LOW
+		 * - set testdin with data
+		 * - set testclk HIGH
+		 */
+
+		/* Set testen low */
+		CLR_DPHY_TEST_CTRL1_EN(kmb, dphy_no);
+
+		/* Set testclk low */
+		CLR_DPHY_TEST_CTRL1_CLK(kmb, dphy_no);
+
+		/* Set data in testdin */
+		kmb_write_mipi(kmb,
+			       DPHY_TEST_DIN0_3 + ((dphy_no / 0x4) * 0x4),
+			       test_data << ((dphy_no % 4) * 8));
+
+		/* Set testclk high */
+		SET_DPHY_TEST_CTRL1_CLK(kmb, dphy_no);
+	}
+}
+
+static inline void
+	set_test_mode_src_osc_freq_target_low_bits(struct kmb_drm_private *kmb,
+						   u32 dphy_no,
+						   u32 freq)
+{
+	/* Typical rise/fall time=166, refer Table 1207 databook,
+	 * sr_osc_freq_target[7:0]
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_SLEW_RATE_DDL_CYCLES,
+		       (freq & 0x7f));
+}
+
+static inline void
+	set_test_mode_src_osc_freq_target_hi_bits(struct kmb_drm_private *kmb,
+						  u32 dphy_no,
+						  u32 freq)
+{
+	u32 data;
+
+	/* Flag this as high nibble */
+	data = ((freq >> 6) & 0x1f) | (1 << 7);
+
+	/* Typical rise/fall time=166, refer Table 1207 databook,
+	 * sr_osc_freq_target[11:7]
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_SLEW_RATE_DDL_CYCLES, data);
+}
+
+static void mipi_tx_get_vco_params(struct vco_params *vco)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vco_table); i++) {
+		if (vco->freq < vco_table[i].freq) {
+			*vco = vco_table[i];
+			return;
+		}
+	}
+
+	WARN_ONCE(1, "Invalid vco freq = %u for PLL setup\n", vco->freq);
+}
+
+static void mipi_tx_pll_setup(struct kmb_drm_private *kmb, u32 dphy_no,
+			      u32 ref_clk_mhz, u32 target_freq_mhz)
+{
+	u32 best_n = 0, best_m = 0;
+	u32 n = 0, m = 0, div = 0, delta, freq = 0, t_freq;
+	u32 best_freq_delta = 3000;
+
+	/* pll_ref_clk: - valid range: 2~64 MHz; Typically 24 MHz
+	 * Fvco: - valid range: 320~1250 MHz (Gen3 D-PHY)
+	 * Fout: - valid range: 40~1250 MHz (Gen3 D-PHY)
+	 * n: - valid range [0 15]
+	 * N: - N = n + 1
+	 *      -valid range: [1 16]
+	 *      -conditions: - (pll_ref_clk / N) >= 2 MHz
+	 *              -(pll_ref_clk / N) <= 8 MHz
+	 * m: valid range [62 623]
+	 * M: - M = m + 2
+	 *      -valid range [64 625]
+	 *      -Fvco = (M/N) * pll_ref_clk
+	 */
+	struct vco_params vco_p = {
+		.range = 0,
+		.divider = 1,
+	};
+
+	vco_p.freq = target_freq_mhz;
+	mipi_tx_get_vco_params(&vco_p);
+
+	/* Search pll n parameter */
+	for (n = PLL_N_MIN; n <= PLL_N_MAX; n++) {
+		/* Calculate the pll input frequency division ratio
+		 * multiply by 1000 for precision -
+		 * no floating point, add n for rounding
+		 */
+		div = ((ref_clk_mhz * 1000) + n) / (n + 1);
+
+		/* Found a valid n parameter */
+		if ((div < 2000 || div > 8000))
+			continue;
+
+		/* Search pll m parameter */
+		for (m = PLL_M_MIN; m <= PLL_M_MAX; m++) {
+			/* Calculate the Fvco(DPHY PLL output frequency)
+			 * using the current n,m params
+			 */
+			freq = div * (m + 2);
+			freq /= 1000;
+
+			/* Trim the potential pll freq to max supported */
+			if (freq > PLL_FVCO_MAX)
+				continue;
+
+			delta = abs(freq - target_freq_mhz);
+
+			/* Select the best (closest to target pll freq)
+			 * n,m parameters so far
+			 */
+			if (delta < best_freq_delta) {
+				best_n = n;
+				best_m = m;
+				best_freq_delta = delta;
+			}
+		}
+	}
+
+	/* Program vco_cntrl parameter
+	 * PLL_VCO_Control[5:0] = pll_vco_cntrl_ovr,
+	 * PLL_VCO_Control[6]   = pll_vco_cntrl_ovr_en
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_VCO_CTRL, (vco_p.range
+								| (1 << 6)));
+
+	/* Program m, n pll parameters */
+	drm_dbg(&kmb->drm, "m = %d n = %d\n", best_m, best_n);
+
+	/* PLL_Input_Divider_Ratio[3:0] = pll_n_ovr */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_INPUT_DIVIDER,
+		       (best_n & 0x0f));
+
+	/* m - low nibble PLL_Loop_Divider_Ratio[4:0]
+	 * pll_m_ovr[4:0]
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_FEEDBACK_DIVIDER,
+		       (best_m & 0x1f));
+
+	/* m - high nibble PLL_Loop_Divider_Ratio[4:0]
+	 * pll_m_ovr[9:5]
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_FEEDBACK_DIVIDER,
+		       ((best_m >> 5) & 0x1f) | PLL_FEEDBACK_DIVIDER_HIGH);
+
+	/* Enable overwrite of n,m parameters :pll_n_ovr_en, pll_m_ovr_en */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_OUTPUT_CLK_SEL,
+		       (PLL_N_OVR_EN | PLL_M_OVR_EN));
+
+	/* Program Charge-Pump parameters */
+
+	/* pll_prop_cntrl-fixed values for prop_cntrl from DPHY doc */
+	t_freq = target_freq_mhz * vco_p.divider;
+	test_mode_send(kmb, dphy_no,
+		       TEST_CODE_PLL_PROPORTIONAL_CHARGE_PUMP_CTRL,
+		       ((t_freq > 1150) ? 0x0C : 0x0B));
+
+	/* pll_int_cntrl-fixed value for int_cntrl from DPHY doc */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_INTEGRAL_CHARGE_PUMP_CTRL,
+		       0x00);
+
+	/* pll_gmp_cntrl-fixed value for gmp_cntrl from DPHY doci */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_GMP_CTRL, 0x10);
+
+	/* pll_cpbias_cntrl-fixed value for cpbias_cntrl from DPHY doc */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_CHARGE_PUMP_BIAS, 0x10);
+
+	/* pll_th1 -Lock Detector Phase error threshold,
+	 * document gives fixed value
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_PHASE_ERR_CTRL, 0x02);
+
+	/* PLL Lock Configuration */
+
+	/* pll_th2 - Lock Filter length, document gives fixed value */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_LOCK_FILTER, 0x60);
+
+	/* pll_th3- PLL Unlocking filter, document gives fixed value */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_UNLOCK_FILTER, 0x03);
+
+	/* pll_lock_sel-PLL Lock Detector Selection,
+	 * document gives fixed value
+	 */
+	test_mode_send(kmb, dphy_no, TEST_CODE_PLL_LOCK_DETECTOR, 0x02);
+}
+
+static void set_slewrate_gt_1500(struct kmb_drm_private *kmb, u32 dphy_no)
+{
+	u32 test_code = 0, test_data = 0;
+	/* Bypass slew rate calibration algorithm
+	 * bits[1:0} srcal_en_ovr_en, srcal_en_ovr
+	 */
+	test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+	test_data = 0x02;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Disable slew rate calibration */
+	test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+	test_data = 0x00;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+}
+
+static void set_slewrate_gt_1000(struct kmb_drm_private *kmb, u32 dphy_no)
+{
+	u32 test_code = 0, test_data = 0;
+
+	/* BitRate: > 1 Gbps && <= 1.5 Gbps: - slew rate control ON
+	 * typical rise/fall times: 166 ps
+	 */
+
+	/* Do not bypass slew rate calibration algorithm
+	 * bits[1:0}=srcal_en_ovr_en, srcal_en_ovr, bit[6]=sr_range
+	 */
+	test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+	test_data = (0x03 | (1 << 6));
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Enable slew rate calibration */
+	test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+	test_data = 0x01;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Set sr_osc_freq_target[6:0] low nibble
+	 * typical rise/fall time=166, refer Table 1207 databook
+	 */
+	test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+	test_data = (0x72f & 0x7f);
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Set sr_osc_freq_target[11:7] high nibble
+	 * Typical rise/fall time=166, refer Table 1207 databook
+	 */
+	test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+	test_data = ((0x72f >> 6) & 0x1f) | (1 << 7);
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+}
+
+static void set_slewrate_lt_1000(struct kmb_drm_private *kmb, u32 dphy_no)
+{
+	u32 test_code = 0, test_data = 0;
+
+	/* lane_rate_mbps <= 1000 Mbps
+	 * BitRate:  <= 1 Gbps:
+	 * - slew rate control ON
+	 * - typical rise/fall times: 225 ps
+	 */
+
+	/* Do not bypass slew rate calibration algorithm */
+	test_code = TEST_CODE_SLEW_RATE_OVERRIDE_CTRL;
+	test_data = (0x03 | (1 << 6));
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Enable slew rate calibration */
+	test_code = TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL;
+	test_data = 0x01;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Typical rise/fall time=255, refer Table 1207 databook */
+	test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+	test_data = (0x523 & 0x7f);
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Set sr_osc_freq_target[11:7] high nibble */
+	test_code = TEST_CODE_SLEW_RATE_DDL_CYCLES;
+	test_data = ((0x523 >> 6) & 0x1f) | (1 << 7);
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+}
+
+static void setup_pll(struct kmb_drm_private *kmb, u32 dphy_no,
+		      struct mipi_ctrl_cfg *cfg)
+{
+	u32 test_code = 0, test_data = 0;
+
+	/* Set PLL regulator in bypass */
+	test_code = TEST_CODE_PLL_ANALOG_PROG;
+	test_data = 0x01;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* PLL Parameters Setup */
+	mipi_tx_pll_setup(kmb, dphy_no, cfg->ref_clk_khz / 1000,
+			  cfg->lane_rate_mbps / 2);
+
+	/* Set clksel */
+	kmb_write_bits_mipi(kmb, DPHY_INIT_CTRL1, PLL_CLKSEL_0, 2, 0x01);
+
+	/* Set pll_shadow_control */
+	kmb_set_bit_mipi(kmb, DPHY_INIT_CTRL1, PLL_SHADOW_CTRL);
+}
+
+static void set_lane_data_rate(struct kmb_drm_private *kmb, u32 dphy_no,
+			       struct mipi_ctrl_cfg *cfg)
+{
+	u32 i, test_code = 0, test_data = 0;
+
+	for (i = 0; i < MIPI_DPHY_DEFAULT_BIT_RATES; i++) {
+		if (mipi_hs_freq_range[i].default_bit_rate_mbps <
+		    cfg->lane_rate_mbps)
+			continue;
+
+		/* Send the test code and data */
+		/* bit[6:0] = hsfreqrange_ovr bit[7] = hsfreqrange_ovr_en */
+		test_code = TEST_CODE_HS_FREQ_RANGE_CFG;
+		test_data = (mipi_hs_freq_range[i].hsfreqrange_code & 0x7f) |
+		    (1 << 7);
+		test_mode_send(kmb, dphy_no, test_code, test_data);
+		break;
+	}
+}
+
+static void dphy_init_sequence(struct kmb_drm_private *kmb,
+			       struct mipi_ctrl_cfg *cfg, u32 dphy_no,
+			       int active_lanes, enum dphy_mode mode)
+{
+	u32 test_code = 0, test_data = 0, val;
+
+	/* Set D-PHY in shutdown mode */
+	/* Assert RSTZ signal */
+	CLR_DPHY_INIT_CTRL0(kmb, dphy_no, RESETZ);
+
+	/* Assert SHUTDOWNZ signal */
+	CLR_DPHY_INIT_CTRL0(kmb, dphy_no, SHUTDOWNZ);
+	val = kmb_read_mipi(kmb, DPHY_INIT_CTRL0);
+
+	/* Init D-PHY_n
+	 * Pulse testclear signal to make sure the d-phy configuration
+	 * starts from a clean base
+	 */
+	CLR_DPHY_TEST_CTRL0(kmb, dphy_no);
+	ndelay(15);
+	SET_DPHY_TEST_CTRL0(kmb, dphy_no);
+	ndelay(15);
+	CLR_DPHY_TEST_CTRL0(kmb, dphy_no);
+	ndelay(15);
+
+	/* Set mastermacro bit - Master or slave mode */
+	test_code = TEST_CODE_MULTIPLE_PHY_CTRL;
+
+	/* DPHY has its own clock lane enabled (master) */
+	if (mode == MIPI_DPHY_MASTER)
+		test_data = 0x01;
+	else
+		test_data = 0x00;
+
+	/* Send the test code and data */
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Set the lane data rate */
+	set_lane_data_rate(kmb, dphy_no, cfg);
+
+	/* High-Speed Tx Slew Rate Calibration
+	 * BitRate: > 1.5 Gbps && <= 2.5 Gbps: slew rate control OFF
+	 */
+	if (cfg->lane_rate_mbps > 1500)
+		set_slewrate_gt_1500(kmb, dphy_no);
+	else if (cfg->lane_rate_mbps > 1000)
+		set_slewrate_gt_1000(kmb, dphy_no);
+	else
+		set_slewrate_lt_1000(kmb, dphy_no);
+
+	/* Set cfgclkfreqrange */
+	val = (((cfg->cfg_clk_khz / 1000) - 17) * 4) & 0x3f;
+	SET_DPHY_FREQ_CTRL0_3(kmb, dphy_no, val);
+
+	/* Enable config clk for the corresponding d-phy */
+	kmb_set_bit_mipi(kmb, DPHY_CFG_CLK_EN, dphy_no);
+
+	/* PLL setup */
+	if (mode == MIPI_DPHY_MASTER)
+		setup_pll(kmb, dphy_no, cfg);
+
+	/* Send NORMAL OPERATION test code */
+	test_code = 0x0;
+	test_data = 0x0;
+	test_mode_send(kmb, dphy_no, test_code, test_data);
+
+	/* Configure BASEDIR for data lanes
+	 * NOTE: basedir only applies to LANE_0 of each D-PHY.
+	 * The other lanes keep their direction based on the D-PHY type,
+	 * either Rx or Tx.
+	 * bits[5:0]  - BaseDir: 1 = Rx
+	 * bits[9:6] - BaseDir: 0 = Tx
+	 */
+	kmb_write_bits_mipi(kmb, DPHY_INIT_CTRL2, 0, 9, 0x03f);
+	ndelay(15);
+
+	/* Enable CLOCK LANE
+	 * Clock lane should be enabled regardless of the direction
+	 * set for the D-PHY (Rx/Tx)
+	 */
+	kmb_set_bit_mipi(kmb, DPHY_INIT_CTRL2, 12 + dphy_no);
+
+	/* Enable DATA LANES */
+	kmb_write_bits_mipi(kmb, DPHY_ENABLE, dphy_no * 2, 2,
+			    ((1 << active_lanes) - 1));
+
+	ndelay(15);
+
+	/* Take D-PHY out of shutdown mode */
+	/* Deassert SHUTDOWNZ signal */
+	SET_DPHY_INIT_CTRL0(kmb, dphy_no, SHUTDOWNZ);
+	ndelay(15);
+
+	/* Deassert RSTZ signal */
+	SET_DPHY_INIT_CTRL0(kmb, dphy_no, RESETZ);
+}
+
+static void dphy_wait_fsm(struct kmb_drm_private *kmb, u32 dphy_no,
+			  enum dphy_tx_fsm fsm_state)
+{
+	enum dphy_tx_fsm val = DPHY_TX_POWERDWN;
+	int i = 0;
+	int status = 1;
+
+	do {
+		test_mode_send(kmb, dphy_no, TEST_CODE_FSM_CONTROL, 0x80);
+
+		val = GET_TEST_DOUT4_7(kmb, dphy_no);
+		i++;
+		if (i > TIMEOUT) {
+			status = 0;
+			break;
+		}
+	} while (val != fsm_state);
+
+	drm_dbg(&kmb->drm, "%s: dphy %d val = %x", __func__, dphy_no, val);
+	drm_dbg(&kmb->drm, "* DPHY %d WAIT_FSM %s *",
+		dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static void wait_init_done(struct kmb_drm_private *kmb, u32 dphy_no,
+			   u32 active_lanes)
+{
+	u32 stopstatedata = 0;
+	u32 data_lanes = (1 << active_lanes) - 1;
+	int i = 0, val;
+	int status = 1;
+
+	do {
+		val = kmb_read_mipi(kmb, MIPI_DPHY_STAT4_7);
+		stopstatedata = GET_STOPSTATE_DATA(kmb, dphy_no) & data_lanes;
+
+		/* TODO-need to add a time out and return failure */
+		i++;
+
+		if (i > TIMEOUT) {
+			status = 0;
+			drm_dbg(&kmb->drm,
+				"! WAIT_INIT_DONE: TIMING OUT!(err_stat=%d)",
+				kmb_read_mipi(kmb, MIPI_DPHY_ERR_STAT6_7));
+			break;
+		}
+	} while (stopstatedata != data_lanes);
+
+	drm_dbg(&kmb->drm, "* DPHY %d INIT - %s *",
+		dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static void wait_pll_lock(struct kmb_drm_private *kmb, u32 dphy_no)
+{
+	int i = 0;
+	int status = 1;
+
+	do {
+		/* TODO-need to add a time out and return failure */
+		i++;
+		if (i > TIMEOUT) {
+			status = 0;
+			drm_dbg(&kmb->drm, "%s: timing out", __func__);
+			break;
+		}
+	} while (!GET_PLL_LOCK(kmb, dphy_no));
+
+	drm_dbg(&kmb->drm, "* PLL Locked for DPHY %d - %s *",
+		dphy_no, status ? "SUCCESS" : "FAILED");
+}
+
+static u32 mipi_tx_init_dphy(struct kmb_drm_private *kmb,
+			     struct mipi_ctrl_cfg *cfg)
+{
+	u32 dphy_no = MIPI_DPHY6;
+
+	/* Multiple D-PHYs needed */
+	if (cfg->active_lanes > MIPI_DPHY_D_LANES) {
+		/*
+		 *Initialization for Tx aggregation mode is done according to
+		 *a. start init PHY1
+		 *b. poll for PHY1 FSM state LOCK
+		 *   b1. reg addr 0x03[3:0] - state_main[3:0] == 5 (LOCK)
+		 *c. poll for PHY1 calibrations done :
+		 *   c1. termination calibration lower section: addr 0x22[5]
+		 *   - rescal_done
+		 *   c2. slewrate calibration (if data rate < = 1500 Mbps):
+		 *     addr 0xA7[3:2] - srcal_done, sr_finished
+		 *d. start init PHY0
+		 *e. poll for PHY0 stopstate
+		 *f. poll for PHY1 stopstate
+		 */
+		/* PHY #N+1 ('slave') */
+
+		dphy_init_sequence(kmb, cfg, dphy_no + 1,
+				   (cfg->active_lanes - MIPI_DPHY_D_LANES),
+				   MIPI_DPHY_SLAVE);
+		dphy_wait_fsm(kmb, dphy_no + 1, DPHY_TX_LOCK);
+
+		/* PHY #N master */
+		dphy_init_sequence(kmb, cfg, dphy_no, MIPI_DPHY_D_LANES,
+				   MIPI_DPHY_MASTER);
+
+		/* Wait for DPHY init to complete */
+		wait_init_done(kmb, dphy_no, MIPI_DPHY_D_LANES);
+		wait_init_done(kmb, dphy_no + 1,
+			       cfg->active_lanes - MIPI_DPHY_D_LANES);
+		wait_pll_lock(kmb, dphy_no);
+		wait_pll_lock(kmb, dphy_no + 1);
+		dphy_wait_fsm(kmb, dphy_no, DPHY_TX_IDLE);
+	} else {		/* Single DPHY */
+		dphy_init_sequence(kmb, cfg, dphy_no, cfg->active_lanes,
+				   MIPI_DPHY_MASTER);
+		dphy_wait_fsm(kmb, dphy_no, DPHY_TX_IDLE);
+		wait_init_done(kmb, dphy_no, cfg->active_lanes);
+		wait_pll_lock(kmb, dphy_no);
+	}
+
+	return 0;
+}
+
+static void connect_lcd_to_mipi(struct kmb_drm_private *kmb)
+{
+	/* DISABLE MIPI->CIF CONNECTION */
+	kmb_write_msscam(kmb, MSS_MIPI_CIF_CFG, 0);
+
+	/* ENABLE LCD->MIPI CONNECTION */
+	kmb_write_msscam(kmb, MSS_LCD_MIPI_CFG, 1);
+
+	/* DISABLE LCD->CIF LOOPBACK */
+	kmb_write_msscam(kmb, MSS_LOOPBACK_CFG, 0);
+}
+
+int kmb_dsi_mode_set(struct drm_device *dev, struct drm_display_mode *mode)
+{
+	struct kmb_drm_private *kmb = to_kmb(dev);
+	u64 data_rate;
+
+	mipi_tx_init_cfg.active_lanes = MIPI_TX_ACTIVE_LANES;
+
+	mipi_tx_frame0_sect_cfg.width_pixels = mode->crtc_hdisplay;
+	mipi_tx_frame0_sect_cfg.height_lines = mode->crtc_vdisplay;
+	mipitx_frame0_cfg.vsync_width =
+		mode->crtc_vsync_end - mode->crtc_vsync_start;
+	mipitx_frame0_cfg.v_backporch =
+		mode->crtc_vtotal - mode->crtc_vsync_end;
+	mipitx_frame0_cfg.v_frontporch =
+		mode->crtc_vsync_start - mode->crtc_vdisplay;
+	mipitx_frame0_cfg.hsync_width =
+		mode->crtc_hsync_end - mode->crtc_hsync_start;
+	mipitx_frame0_cfg.h_backporch =
+		mode->crtc_htotal - mode->crtc_hsync_end;
+	mipitx_frame0_cfg.h_frontporch =
+		mode->crtc_hsync_start - mode->crtc_hdisplay;
+
+	/* Lane rate = (vtotal*htotal*fps*bpp)/4 / 1000000
+	 * to convert to Mbps
+	 */
+	data_rate = ((((u32)mode->crtc_vtotal *	(u32)mode->crtc_htotal) *
+			(u32)(drm_mode_vrefresh(mode)) *
+			MIPI_TX_BPP) / mipi_tx_init_cfg.active_lanes) /	1000000;
+
+	drm_dbg(&kmb->drm, "data_rate=%u active_lanes=%d\n",
+		(u32)data_rate, mipi_tx_init_cfg.active_lanes);
+
+	/* When late rate < 800, modeset fails with 4 lanes,
+	 * so switch to 2 lanes
+	 */
+	if (data_rate < 800) {
+		mipi_tx_init_cfg.active_lanes = 2;
+		mipi_tx_init_cfg.lane_rate_mbps = data_rate * 2;
+	} else {
+		mipi_tx_init_cfg.lane_rate_mbps = data_rate;
+	}
+
+	kmb_write_mipi(kmb, DPHY_ENABLE, 0);
+	kmb_write_mipi(kmb, DPHY_INIT_CTRL0, 0);
+	kmb_write_mipi(kmb, DPHY_INIT_CTRL1, 0);
+	kmb_write_mipi(kmb, DPHY_INIT_CTRL2, 0);
+
+	/* Initialize mipi controller */
+	mipi_tx_init_cntrl(kmb, &mipi_tx_init_cfg);
+
+	/* Dphy initialization */
+	mipi_tx_init_dphy(kmb, &mipi_tx_init_cfg);
+
+	connect_lcd_to_mipi(kmb);
+
+	drm_info(&kmb->drm, "mipi hw_initialized");
+
+	return 0;
+}
+
+int kmb_dsi_init(struct drm_device *dev, struct drm_bridge *bridge)
+{
+	struct kmb_dsi *kmb_dsi;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	struct kmb_dsi_host *host;
+	int ret = 0;
+
+	kmb_dsi = kzalloc(sizeof(*kmb_dsi), GFP_KERNEL);
+	if (!kmb_dsi) {
+		DRM_ERROR("failed to allocate kmb_dsi\n");
+		return -ENOMEM;
+	}
+
+	host = kmb_dsi_host_init(dev, kmb_dsi);
+	if (!host) {
+		DRM_ERROR("Failed to allocate host\n");
+		kfree(kmb_dsi);
+		return -ENOMEM;
+	}
+
+	kmb_dsi->dsi_host = host;
+	encoder = &kmb_dsi->base;
+	encoder->possible_crtcs = 1;
+	encoder->possible_clones = 0;
+
+	drm_encoder_init(dev, encoder, &kmb_dsi_funcs, DRM_MODE_ENCODER_DSI,
+			 "MIPI-DSI");
+
+	/* Link drm_bridge to encoder */
+	ret = drm_bridge_attach(encoder, bridge, NULL,
+			DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		DRM_ERROR("failed to attach bridge to MIPI\n");
+		drm_encoder_cleanup(encoder);
+		return ret;
+	}
+	drm_info(dev, "Bridge attached : SUCCESS");
+	connector = drm_bridge_connector_init(dev, encoder);
+	if (IS_ERR(connector)) {
+		DRM_ERROR("Unable to create bridge connector");
+		drm_encoder_cleanup(encoder);
+		return PTR_ERR(connector);
+	}
+	drm_connector_attach_encoder(connector, encoder);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/kmb/kmb_dsi.h b/drivers/gpu/drm/kmb/kmb_dsi.h
new file mode 100644
index 0000000..399666b
--- /dev/null
+++ b/drivers/gpu/drm/kmb/kmb_dsi.h
@@ -0,0 +1,350 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright © 2019-2020 Intel Corporation
+ */
+
+#ifndef __KMB_DSI_H__
+#define __KMB_DSI_H__
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include "kmb_drv.h"
+
+/* MIPI TX CFG*/
+#define MIPI_TX_LANE_DATA_RATE_MBPS 891
+#define MIPI_TX_REF_CLK_KHZ         24000
+#define MIPI_TX_CFG_CLK_KHZ         24000
+#define MIPI_TX_BPP		    24
+
+/* DPHY Tx test codes*/
+#define TEST_CODE_FSM_CONTROL				0x03
+#define TEST_CODE_MULTIPLE_PHY_CTRL			0x0C
+#define TEST_CODE_PLL_PROPORTIONAL_CHARGE_PUMP_CTRL	0x0E
+#define TEST_CODE_PLL_INTEGRAL_CHARGE_PUMP_CTRL		0x0F
+#define TEST_CODE_PLL_VCO_CTRL				0x12
+#define TEST_CODE_PLL_GMP_CTRL				0x13
+#define TEST_CODE_PLL_PHASE_ERR_CTRL			0x14
+#define TEST_CODE_PLL_LOCK_FILTER			0x15
+#define TEST_CODE_PLL_UNLOCK_FILTER			0x16
+#define TEST_CODE_PLL_INPUT_DIVIDER			0x17
+#define TEST_CODE_PLL_FEEDBACK_DIVIDER			0x18
+#define   PLL_FEEDBACK_DIVIDER_HIGH			BIT(7)
+#define TEST_CODE_PLL_OUTPUT_CLK_SEL			0x19
+#define   PLL_N_OVR_EN					BIT(4)
+#define   PLL_M_OVR_EN					BIT(5)
+#define TEST_CODE_VOD_LEVEL				0x24
+#define TEST_CODE_PLL_CHARGE_PUMP_BIAS			0x1C
+#define TEST_CODE_PLL_LOCK_DETECTOR			0x1D
+#define TEST_CODE_HS_FREQ_RANGE_CFG			0x44
+#define TEST_CODE_PLL_ANALOG_PROG			0x1F
+#define TEST_CODE_SLEW_RATE_OVERRIDE_CTRL		0xA0
+#define TEST_CODE_SLEW_RATE_DDL_LOOP_CTRL		0xA3
+#define TEST_CODE_SLEW_RATE_DDL_CYCLES			0xA4
+
+/* DPHY params */
+#define PLL_N_MIN	0
+#define PLL_N_MAX	15
+#define PLL_M_MIN	62
+#define PLL_M_MAX	623
+#define PLL_FVCO_MAX	1250
+
+#define TIMEOUT		600
+
+#define MIPI_TX_FRAME_GEN				4
+#define MIPI_TX_FRAME_GEN_SECTIONS			4
+#define MIPI_CTRL_VIRTUAL_CHANNELS			4
+#define MIPI_D_LANES_PER_DPHY				2
+#define MIPI_CTRL_2LANE_MAX_MC_FIFO_LOC			255
+#define MIPI_CTRL_4LANE_MAX_MC_FIFO_LOC			511
+/* 2 Data Lanes per D-PHY */
+#define MIPI_DPHY_D_LANES				2
+#define MIPI_DPHY_DEFAULT_BIT_RATES			63
+
+#define to_kmb_connector(x) container_of(x, struct kmb_connector, base)
+#define to_kmb_host(x) container_of(x, struct kmb_dsi_host, base)
+#define to_kmb_dsi(x) container_of(x, struct kmb_dsi, base)
+
+struct kmb_connector;
+struct kmb_dsi_host;
+
+struct kmb_dsi {
+	struct drm_encoder base;
+	struct kmb_dsi_host *dsi_host;
+	struct drm_bridge *bridge;
+};
+
+struct kmb_dsi_host {
+	struct mipi_dsi_host *base;
+	struct kmb_dsi *kmb_dsi;
+	struct mipi_dsi_device *device;
+};
+
+struct kmb_connector {
+	struct drm_connector base;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *fixed_mode;
+};
+
+/* DPHY Tx test codes */
+
+enum mipi_ctrl_num {
+	MIPI_CTRL0 = 0,
+	MIPI_CTRL1,
+	MIPI_CTRL2,
+	MIPI_CTRL3,
+	MIPI_CTRL4,
+	MIPI_CTRL5,
+	MIPI_CTRL6,
+	MIPI_CTRL7,
+	MIPI_CTRL8,
+	MIPI_CTRL9,
+	MIPI_CTRL_NA
+};
+
+enum mipi_dphy_num {
+	MIPI_DPHY0 = 0,
+	MIPI_DPHY1,
+	MIPI_DPHY2,
+	MIPI_DPHY3,
+	MIPI_DPHY4,
+	MIPI_DPHY5,
+	MIPI_DPHY6,
+	MIPI_DPHY7,
+	MIPI_DPHY8,
+	MIPI_DPHY9,
+	MIPI_DPHY_NA
+};
+
+enum mipi_dir {
+	MIPI_RX,
+	MIPI_TX
+};
+
+enum mipi_ctrl_type {
+	MIPI_DSI,
+	MIPI_CSI
+};
+
+enum mipi_data_if {
+	MIPI_IF_DMA,
+	MIPI_IF_PARALLEL
+};
+
+enum mipi_data_mode {
+	MIPI_DATA_MODE0,
+	MIPI_DATA_MODE1,
+	MIPI_DATA_MODE2,
+	MIPI_DATA_MODE3
+};
+
+enum mipi_dsi_video_mode {
+	DSI_VIDEO_MODE_NO_BURST_PULSE,
+	DSI_VIDEO_MODE_NO_BURST_EVENT,
+	DSI_VIDEO_MODE_BURST
+};
+
+enum mipi_dsi_blanking_mode {
+	TRANSITION_TO_LOW_POWER,
+	SEND_BLANK_PACKET
+};
+
+enum mipi_dsi_eotp {
+	DSI_EOTP_DISABLED,
+	DSI_EOTP_ENABLES
+};
+
+enum mipi_dsi_data_type {
+	DSI_SP_DT_RESERVED_00 = 0x00,
+	DSI_SP_DT_VSYNC_START = 0x01,
+	DSI_SP_DT_COLOR_MODE_OFF = 0x02,
+	DSI_SP_DT_GENERIC_SHORT_WR = 0x03,
+	DSI_SP_DT_GENERIC_RD = 0x04,
+	DSI_SP_DT_DCS_SHORT_WR = 0x05,
+	DSI_SP_DT_DCS_RD = 0x06,
+	DSI_SP_DT_EOTP = 0x08,
+	DSI_LP_DT_NULL = 0x09,
+	DSI_LP_DT_RESERVED_0A = 0x0a,
+	DSI_LP_DT_RESERVED_0B = 0x0b,
+	DSI_LP_DT_LPPS_YCBCR422_20B = 0x0c,
+	DSI_LP_DT_PPS_RGB101010_30B = 0x0d,
+	DSI_LP_DT_PPS_RGB565_16B = 0x0e,
+	DSI_LP_DT_RESERVED_0F = 0x0f,
+
+	DSI_SP_DT_RESERVED_10 = 0x10,
+	DSI_SP_DT_VSYNC_END = 0x11,
+	DSI_SP_DT_COLOR_MODE_ON = 0x12,
+	DSI_SP_DT_GENERIC_SHORT_WR_1PAR = 0x13,
+	DSI_SP_DT_GENERIC_RD_1PAR = 0x14,
+	DSI_SP_DT_DCS_SHORT_WR_1PAR = 0x15,
+	DSI_SP_DT_RESERVED_16 = 0x16,
+	DSI_SP_DT_RESERVED_17 = 0x17,
+	DSI_SP_DT_RESERVED_18 = 0x18,
+	DSI_LP_DT_BLANK = 0x19,
+	DSI_LP_DT_RESERVED_1A = 0x1a,
+	DSI_LP_DT_RESERVED_1B = 0x1b,
+	DSI_LP_DT_PPS_YCBCR422_24B = 0x1c,
+	DSI_LP_DT_PPS_RGB121212_36B = 0x1d,
+	DSI_LP_DT_PPS_RGB666_18B = 0x1e,
+	DSI_LP_DT_RESERVED_1F = 0x1f,
+
+	DSI_SP_DT_RESERVED_20 = 0x20,
+	DSI_SP_DT_HSYNC_START = 0x21,
+	DSI_SP_DT_SHUT_DOWN_PERIPH_CMD = 0x22,
+	DSI_SP_DT_GENERIC_SHORT_WR_2PAR = 0x23,
+	DSI_SP_DT_GENERIC_RD_2PAR = 0x24,
+	DSI_SP_DT_RESERVED_25 = 0x25,
+	DSI_SP_DT_RESERVED_26 = 0x26,
+	DSI_SP_DT_RESERVED_27 = 0x27,
+	DSI_SP_DT_RESERVED_28 = 0x28,
+	DSI_LP_DT_GENERIC_LONG_WR = 0x29,
+	DSI_LP_DT_RESERVED_2A = 0x2a,
+	DSI_LP_DT_RESERVED_2B = 0x2b,
+	DSI_LP_DT_PPS_YCBCR422_16B = 0x2c,
+	DSI_LP_DT_RESERVED_2D = 0x2d,
+	DSI_LP_DT_LPPS_RGB666_18B = 0x2e,
+	DSI_LP_DT_RESERVED_2F = 0x2f,
+
+	DSI_SP_DT_RESERVED_30 = 0x30,
+	DSI_SP_DT_HSYNC_END = 0x31,
+	DSI_SP_DT_TURN_ON_PERIPH_CMD = 0x32,
+	DSI_SP_DT_RESERVED_33 = 0x33,
+	DSI_SP_DT_RESERVED_34 = 0x34,
+	DSI_SP_DT_RESERVED_35 = 0x35,
+	DSI_SP_DT_RESERVED_36 = 0x36,
+	DSI_SP_DT_SET_MAX_RETURN_PKT_SIZE = 0x37,
+	DSI_SP_DT_RESERVED_38 = 0x38,
+	DSI_LP_DT_DSC_LONG_WR = 0x39,
+	DSI_LP_DT_RESERVED_3A = 0x3a,
+	DSI_LP_DT_RESERVED_3B = 0x3b,
+	DSI_LP_DT_RESERVED_3C = 0x3c,
+	DSI_LP_DT_PPS_YCBCR420_12B = 0x3d,
+	DSI_LP_DT_PPS_RGB888_24B = 0x3e,
+	DSI_LP_DT_RESERVED_3F = 0x3f
+};
+
+enum mipi_tx_hs_tp_sel {
+	MIPI_TX_HS_TP_WHOLE_FRAME_COLOR0 = 0,
+	MIPI_TX_HS_TP_WHOLE_FRAME_COLOR1,
+	MIPI_TX_HS_TP_V_STRIPES,
+	MIPI_TX_HS_TP_H_STRIPES,
+};
+
+enum dphy_mode {
+	MIPI_DPHY_SLAVE = 0,
+	MIPI_DPHY_MASTER
+};
+
+enum dphy_tx_fsm {
+	DPHY_TX_POWERDWN = 0,
+	DPHY_TX_BGPON,
+	DPHY_TX_TERMCAL,
+	DPHY_TX_TERMCALUP,
+	DPHY_TX_OFFSETCAL,
+	DPHY_TX_LOCK,
+	DPHY_TX_SRCAL,
+	DPHY_TX_IDLE,
+	DPHY_TX_ULP,
+	DPHY_TX_LANESTART,
+	DPHY_TX_CLKALIGN,
+	DPHY_TX_DDLTUNNING,
+	DPHY_TX_ULP_FORCE_PLL,
+	DPHY_TX_LOCK_LOSS
+};
+
+struct mipi_data_type_params {
+	u8 size_constraint_pixels;
+	u8 size_constraint_bytes;
+	u8 pixels_per_pclk;
+	u8 bits_per_pclk;
+};
+
+struct mipi_tx_dsi_cfg {
+	u8 hfp_blank_en;	/*horizontal front porch blanking enable */
+	u8 eotp_en;	/*End of transmission packet enable */
+	/*last vertical front porch blanking mode */
+	u8 lpm_last_vfp_line;
+	/*first vertical sync active blanking mode */
+	u8 lpm_first_vsa_line;
+	u8 sync_pulse_eventn;	/*sync type */
+	u8 hfp_blanking;	/*horizontal front porch blanking mode */
+	u8 hbp_blanking;	/*horizontal back porch blanking mode */
+	u8 hsa_blanking;	/*horizontal sync active blanking mode */
+	u8 v_blanking;	/*vertical timing blanking mode */
+};
+
+struct mipi_tx_frame_section_cfg {
+	u32 dma_v_stride;
+	u16 dma_v_scale_cfg;
+	u16 width_pixels;
+	u16 height_lines;
+	u8 dma_packed;
+	u8 bpp;
+	u8 bpp_unpacked;
+	u8 dma_h_stride;
+	u8 data_type;
+	u8 data_mode;
+	u8 dma_flip_rotate_sel;
+};
+
+struct mipi_tx_frame_timing_cfg {
+	u32 bpp;
+	u32 lane_rate_mbps;
+	u32 hsync_width;
+	u32 h_backporch;
+	u32 h_frontporch;
+	u32 h_active;
+	u16 vsync_width;
+	u16 v_backporch;
+	u16 v_frontporch;
+	u16 v_active;
+	u8 active_lanes;
+};
+
+struct mipi_tx_frame_sect_phcfg {
+	u32 wc;
+	enum mipi_data_mode data_mode;
+	enum mipi_dsi_data_type data_type;
+	u8 vchannel;
+	u8 dma_packed;
+};
+
+struct mipi_tx_frame_cfg {
+	struct mipi_tx_frame_section_cfg *sections[MIPI_TX_FRAME_GEN_SECTIONS];
+	u32 hsync_width;	/*in pixels */
+	u32 h_backporch;	/*in pixels */
+	u32 h_frontporch;	/*in pixels */
+	u16 vsync_width;	/*in lines */
+	u16 v_backporch;	/*in lines */
+	u16 v_frontporch;	/*in lines */
+};
+
+struct mipi_tx_ctrl_cfg {
+	struct mipi_tx_frame_cfg *frames[MIPI_TX_FRAME_GEN];
+	struct mipi_tx_dsi_cfg *tx_dsi_cfg;
+	u8 line_sync_pkt_en;
+	u8 line_counter_active;
+	u8 frame_counter_active;
+	u8 tx_hsclkkidle_cnt;
+	u8 tx_hsexit_cnt;
+	u8 tx_crc_en;
+	u8 tx_hact_wait_stop;
+	u8 tx_always_use_hact;
+	u8 tx_wait_trig;
+	u8 tx_wait_all_sect;
+};
+
+/*configuration structure for MIPI control */
+struct mipi_ctrl_cfg {
+	u8 active_lanes;	/* # active lanes per controller 2/4 */
+	u32 lane_rate_mbps;	/*MBPS */
+	u32 ref_clk_khz;
+	u32 cfg_clk_khz;
+	struct mipi_tx_ctrl_cfg tx_ctrl_cfg;
+};
+
+struct drm_bridge *kmb_dsi_host_bridge_init(struct device *dev);
+int kmb_dsi_init(struct drm_device *dev, struct drm_bridge *bridge);
+void kmb_dsi_host_unregister(void);
+int kmb_dsi_mode_set(struct drm_device *dev, struct drm_display_mode *mode);
+#endif /* __KMB_DSI_H__ */